Maintenance of NH 730H from Km. 5.160 to Km. 7.000 and Km. 14.000 to Km 47.250 under Short Term Maintenance Contract on percentage rate basic for the financial year 2025 26 in the jurisdiction of NH Division, UP PWD, Lakhimpur kheri in the State of

BILL NO. 1: ROAD MAINTENANCE

Providing spot reconditioning, reconstruction and regravelling to repair specific erosion or other damages for restoring the eroded area to originally constructed cross section on cuts and fills slopes/ shoulders conforming to Technical Specifications Clause no. 3002. Fill material should be brought from borrow areas located outside ROW conforming to Technical Specification no. 305. Watered and well compacted with plate compactor or power rammer with all leads and lifts as directed by the Engineer (Quantity of compacted Fill material to be measured on cross sectional area basis)

Removal of rank vegetation/weeds and undesirable vegetation from shoulders, embankment slopes upto ROW (both sides) complete in all respects including breaking of clods, rough dressing and disposal of waste material and vegetation at a place outside ROW as per direction of Engineer- In-Charge and as per Maintenance Standards Clause 3.3 (Frequency will be once in a quarter). Shoulders including side slopes of embankment upto toe line on both sides of the carriageway. (Frequency of cleaning will be four times in a year; however limited to only areas prone to growth of rank/ undesirable vegetation and weeds).

Providing slurry seal for filling of hair cracks, surface cracks and preventive/ renewal treatment as per MoRTH Specification Clause 512.

BILL NO. 2: Road Property Maintenance

Providing and marking of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250gms/ sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished Surface to be level, uniform and free from streaks and holes complete in all respects. The job includes marking of centre line, shoulder line, edge line, zebra crossing marking, arrows and dashes marking at the junctions as per Technical Specifications Clause 803.4 complete in all respect and as per approval of the Engineer-in-Charge.

Providing and laying of hot applied thermoplastic compound 15 mm thick including reflectorising glass beads @ 500 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes.

Cats Eye/Pavement Marker (NMC nail Less):- Made out of Acrylic-strene-Acrylonitril or Hi-Impect polysterene fitted with Moulded of Methacrylate (NMC) reflector cube corner reflector design; Filled with tightly adhering potting compound as per ASTM D788 size 11.5 cm X 7cm X 1.6 cm or 10 cm X 10 cm X 1.75 cm provided with bituminous adhesive in sufficient quantity with each unit for fixing. No nail should be allowed for fixing.

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium composite pannel sheeting, 4mm thick (with MS angle frame 35x35x5), supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per attached drawing. (Rate all including supply and fixing of all material, labour, T&P etc. required for proper complition of work as per MoRTH specification Cl. 801 and IS/IRC codes.)

600 mm dia Circular sign

900 mm triangular sign.

50x60 cm single chevron

30x90 cm (Left/Right) object Hazard

Providing treatment and repair of pot holes/ruts and any depth/ patch repair of all types of bitumen pavement complete as per Technical Specification Clause 3004.2 and as per direction of Engineer by using paving grade bitumen/ emulsion/ cold ready mix material. The job includes remoyal of all failed material, trimming of completed excavation to providing firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per Clause no. 503 back filling the patch with bituminous material as per clause no.509. Compacting trimming and finishing the surface to form a smooth continuous surface all as per Clause no. 3004.2 of Technical Specification.

EMERGENCY WORK PROVISION FOR RESTORATION

Truck Tipper (10 Tonne)

Hydraulic Excavator (JCB)

Labour: skilled

Labour unskilled

Note:-GST will be paid extra for above all items as per Govt. Norms.

Please Enable Macros to View BoQ information