Provn of certain sanctioned works of AGE B/R (S) (Phase-8) at Tezpur under GE (S) Tezpur

Amount

Surface excvation n.exe 30 CM deep and avg 15CM deep and getting out in soft/loose soil, complete all as specified and as directed.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m depth for foundation and getting out in soft/loose soil.for foundation etc, complete all as specified and as directed.

Returning, filling incl spreading levelling watering and well ramming in layers not exc 25 cm for soft/lose soil, complete all as specified and as directed.

Removing excavated material n exc.50 m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified and as directed.

M & L for Hardcore of granite stone of guage n exe. 63mm deposited spread and levelled in layers n exe 15 CM thick watered and rammed to a true surface, complete all as specified and as directed.

M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and as directed.

M&L for sand filling under floor/cushion or in foundation or in trenches including watrering and cosolidation, complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 (40mm graded aggregate) as in foundation, filling and mass concrete, complete all as specified and as directed.

M&L TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and as directed.

M&L mild steel bars 10 mm dia and over cut to length, bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with mild steel wire Complete all as specified and as directed.

M&L for RCC M25 (design mix) (20mm graded aggregate)as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, underremaed pliles and mass concrete , complete all as specified and as directed.

M&L for RCC M25 (design mix) (20mm graded aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span , complete all as specified and as directed.

M&L for RCCM25 (design mix) (20mm graded aggregate) as in coloumn, pillar, pier, posts etc Complete all as specified and as directed.

M&L for RCC M25 (design mix) (20mm graded aggregate) as in slab supported in walls, beams and columns in floors, roofs, landing etc., Complete all as specified and as directed.

M&L for RCC M25 (design mix) (20mm graded aggregate) as in chajja Complete all as specified and as directed.

Demolition cement concrete (unreinforced) n'exc 15 cm thick (below or above ground level) Complete all as specified and as directed.

M&L for precast cement concrete type B1 1:2:4 ( 20 mm graded aggregate) as in cover slab for drain, set in CM (1:4) etc with necessary formwork complete all as specified.

M/L PCC 1:2:4 type B1 20mm grade aggregate as in, coping or similar work incl use and waste of form work making surface smooth without using extra cement all asspecified and directed.

Use & waste form work for flat fair finished surfaces of concrete foundation, footings, bases of columns and plinth beam and similar work, complete all as specified and as directed.

Use & waste form work for flat finished soffits of suspended slabs such as roof slab etc not exceeding 200mm thick, (Horizontal or sloping) complete, complete all as specified and as directed.

Use & waste form work to edges of concte flats opening in concrete wall, flat rough finished surfaces of concrete exc 10cm but n exc 20cm wide concrete, complete all as specified and as directed.

Use & waste form work for flat finished sides and soffits of floor or roof beams, lintels, cantilevers, shelves etc, complete all as specified and as directed.

Use & waste form work to sides of pillars,posts, struts, piers, columns and stanchions finished surfaces of concrete, complete all as specified and as directed.

Demolition of brick work/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and pre-cast concrete articles all as directed.

Material and labour for sub class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

Material and labour for sub class B bricks, bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar ( 1:4) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

M&L for brickwork with sub class 'B' bricks in one brick thick honeycomb work built in CM (1:3) complete all as specified.

S&F 2nd class hard wood plain, solid, striaght in chowkats and framed rebated on the solid rounded or chamfered put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement, complete all as specified and as directed.

Material and labour for providing Plain Cement Concrete (1:3:6) type C1 using 20mm graded aggregate as in bed block or hold fast/coping,surface channel all as specified and directed.

Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement ,including forms ,moulds, mitred/stopped ends etc complete all as specified and directed.

Supply and fix, 30 mm thick, flush shutters, solid core construction, with particle board core and ply wood face panels commercial type on both sides all as specified and directed

Supply and fix 35 mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (with sash bars any Number) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire mesh) etc. fitted to chowkhats complete all as specified and directed. (Note : wire cloth wil be measured and paid separately), complete all as specified and as directed.

S&F Anodised aluminium frame (Two/three track) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc, complete all as specified.

S&F Steel ventilator with top hung shutter including hing,steel peg stay, complete all as specified and as directed.

S&F 2nd class hard wood small fitting such as brackets of any type latch and hinge blocks,shaped door and window stops and the like including all necessary labours articles n.exe 200 cu.cm each, complete all as specified and as directed.

S&F 50mm Butt hinges medium weight cold rolled mild steel , complete all as specified and as directed.

S&F 100mm size type B-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised, complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws, complete all as specified and as directed.

S&F extruded aluminium alloy handels fabricated type, anodised, 150 mm long and fixed with screws, complete all as specified and as directed.

S&F MS 200 mm ordinary pattern door spring including roller and roller plate, complete all as specified and as directed.

S&F Aluminium anodised sliding door bolts of size 300 mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy, complete all as specified and as directed.

S&F in repair floor door stopper of aluminium alloy body and tongue,anodised with hard drawn steel spring,overall length of 140 mm fixed with screw, complete all as specified and as directed.

S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed withstainless steel wire staples, complete all as specified and as directed.

S& F 4.0 mm thick sheet glass ordinary/tinted quality and glazing with oil putty in squares exc 0.5 sq. m in each pane in squares, complete all as specified and as directed.

M&L 75 mm thick PCC 1: 3:6 type C2 using 20mm graded agg finishing even and smooth using extra cement as in plinth protections/path/paving including filler joints with sealing compound grade 'A' complete all as specifed and as directed.

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) any shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4, complete all as specified and as directed.

All as per item No 47 above but in skirting over 10mm thick screeding in cement mortar 1:3, complete all as specified and as directed.

M&L for chequered cement concrete tiles of size 30 cm x 30 cm x 25 mm thick with with cement and pigment treated with antifungal paint set and jointed and pointed in neat cement slurry with pigment in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 15mm thk cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing Complete all as specified and as directed.

M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado over 10mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing Complete all as specified and as directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons laid and bedded pointed in any motar etc all as specified and directed

Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; Complete all as specified and as directed.

Material & Labour in repairs 19/20 mm thick Block boards, grade 2 quality, interior grade, laminated sheet with decorative face, veneer on one face, commercial type fixed with screws to timber frame work complete all as specified and directed.

M&L Prelaminated particle board 12 thk, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and as directed.

S & F 100 mm long hasp and staple aluminium anodised wire type ,incl bolt to hinge plate and fixed with screw complete all as specified and directed.

S & F continuous(Piano) hinges 30 mm width mild steel ,bright finish fixed with screw complete all as specified and directed.

S & F 40 mm dia cupboard knob fixed with nut ,screw and washer of brass polished complete all as specified and directed.

M&L Applying two coats of Oil bound distemper by smart painting method to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall all as specefied and directed.

M&L Applying two coats of Oil bound distemper by smart painting method on wall surface over a coat of 1 mm layer wall care putty over a coat of primer including pcomplete removal of existing surface, complete all as specified and directed.

M&L for preparation of newly plaster surafce and apllying two coats of weather coat over a thin layer of putty to make surface smooth and one coat of primer damp sheild over newely plastered wall complete all as specefied and directed.

S & F in repairs wall mixer CP 15 mm bore including 125 mm dia overhead shower, complete with 15 mm long bend pipe and wall flenge including making good wall surface complte all as specified and directed

S&F 15mm bore two way bib cock cast copper alloy CP Fancy type ,with wall flange screwed down for iron pipe or union , complete all as specified and directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

M&L 100 mm thick,Cement concrete, type D-2, (1:4:8), 40 mm graded aggregate as in sub base even and rough all as specified and directed

M&L for 75 mm thick PCC 1:3:6 type C2 using (40 mm graded aggregate) as in as in sub base complete all as specifed and as directed.

M&L 100 mm thick PCC type B1 (1:2:4) of 20 mm graded aggregate as in sub base even and rough complete all as specified and as directed.

M&L 50 mm thick PCC type B1 (1:2:4) of 20 mm graded aggregate as in flooring etc. incl finishing the concrete surface even and rough to receive the topping layer complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding,(but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Non - skid Ceramiccoloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in Skirting/Dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4, complete all as specified and directed.

S&F Coloured Glazed ceramic tiles 450 x 300 mm x 7 to 8mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm screed bed in Cement mortar (1:3) complete all as specified and directed.

M/L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in CM 1:4 over cooking platform, complete all as specified and directed.

M&L 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10mm thick rendering in CM 1:3, complete all as specified and directed.

Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all as directed.

M & L, 15mm thick rendering in C.M. (1:4) on fair faces of brick work finished even and fair without using extra cement , complete all as specified and directed.

M & L, 10mm thick rendering in C.M. (1:6) on brick work finished even and fair without using extra cement , complete all as specified and directed.

Supply only liquid water proofing compound. All as specifed and diretes

S&F solid PVC door frame of size 50mm X 47mm, made out of 5mm plain colour PVC sheet reinfoced with M.S. square tube, supply and fixing in opening as per specification.

Supply and fix, 30 mm thick factory made solid panel PVC shutters (conforming to IS : 4020) consisting of frame made out of mild steel tubes of 19 gauge and size 19 mm x 19 mm for stiles and 15 mm x 15 mm for top and bottom rails. Mild steel frame shall have a coat of steel primer and covered with PVC channel size 30 mm x 50 mm forming stiles and 5 mm thick 75 mm wide PVC sheets for top rail, lock rails, bottom rail on either side and 10 mm thick 20 mm wide cross PVC sheets as gap insert for top rail and bottom rail, panneling of 5 mm thick PVC sheet to be fitted in mild steel frame welded/sealed to the stiles and rails with 30 mm wide x 5 mm thick PVC sheet beading in either side and joint together with solvenet cement adhesive etc an additional 5 mm thick PVC strip of 20 mm width to struck on the interior side of the ‘C’ channel using PVC solvent adhesive including and fitted to PVC door frame all as specified and directed.

S & F 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets,32 mm dia waste pipe complete all as specified and directed.

S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floor or fixed in wall 110MM, complete all as specified and directed.

S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or fixed in wall 75 MM, complete all as specified and directed.

S&F for PVC (SWR) with access door bend 110mm dia, complete all as specified and directed.

S&F for PVC (SWR) with access door bend 75 mm dia, complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal 110 mm dia, complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal 75 mm dia, complete all as specified and directed.

S&F 100 mm bore PVC (SWR) vent cowl including jointing with solvent cement complete all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified

S&F 15mm Stop valves/angle cock, cast copper alloy chromium plated ,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified.

S&F 15mm Canclead type Stop valves/angle cock, cast copper alloy chromium plated ,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified.

S&F Bib taps 15 mm, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified.

S&F Mild steel framed work as in grills, with ends of bars shouldered work conforming to Fe-410-0 as per existing grills at site and directed by Engr-in-Charge.

S&F joist,channel,angle,flat iron or Tee section fixed independentaly with connecting plates conforming to Fe-410-0 as per existing grills at site and directed by Engr-in-Charge.

S&F Steel rolling shutters 1 mm thick, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type

S&F Safety lever locks mild steel with 4 levers for rolling shutters, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for applying three coats of white wash after preparation of new plastered surfaces on wall by brooming down or steel by wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots.etc complete all as specified and as directed.

M&L for applying one coats of white wash on ceiling and cornices including preparation of old plastered surfaces by brooming down or steel by wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots.etc complete all as specified and as directed.

S&F 4 mm thick sheet figured glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane, complete all as specified and directed.

Supply and fix,vitreous china wash down water closet pan (Pedestal pattern) white (excluding flushing cistern ) but including seat cover white closed type and flush pipe complete all as specified and directed

Supply and fix vitreous china wash basin, white, flat back size 580 x 450 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed.

S&F in repairs kitchen plate rack made out of stainless steel 0.63 mm thick sheet with partitions and size of rack 750 x 60 x 250 mm with shape and pattern as per sample kept in Sample room of GE Office complete all as specified and directed.

S&F in repair Tubular towel rail 20 mm dia with brass chromium plated, complete all as specified and as directed.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed.

Supply and fix, as in repair, Overhead Shower 125 mm dia Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning Syste, including fixing to steel pipe or union of 15mm bore all as specified and direcetd. Essco Cat No Eos-542A or equivalent

Supply and fix 15 mm bore pillar tap, fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule all as specified and directed.

Supply and fix, 75 mm dia of outlet PVC(SWR) floor trap, plain with granting including jointing with solvent cement all as specified and directed

Supply and fix, sheet glass self assembly consisting of 5.00 mm thick sheet glass shelf 12cm wide with cromium plated bracket guard all as specified and directed.

Supply & fix 20 mm dia stainless steel curtain rod with two Nos of socket complete for doors/window opening all as specified and directed.

M & L for PCC 1:2:4 Type B0 25 mm thick as in damp roof course to horizotal and verticle including necessary from worl complete all as specified and directed

S& F Towel Ring of stainless steel fixed and including Chromium plated brass screws complete all as specified and directed

Supply and fix CP 32 mm dia waste coupling forstainless WHB with waste pipe and out let screwed for pipe or connections including packing, union and cap etc complete all as specified and directed.

Supply and fix CP 40 mm dia waste coupling forstainless WHB with waste pipe and out let screwed for pipe or connections including packing, union and cap etc complete all as specified and directed.

S& F for laying 15mm bore steel tubes medium grade glavanised with all fitting and fixed complete to walls/ceilings or laid in floors all complete all as specified and directed

S&F for laying 20mm bore steel types medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed

Refixing old steel tubing 15 mm dia and connections in new or old position (Walls, ceiling, floors, etc.), complete all as specified and directed.

Supply and fix in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position size 500 ltrs all as specified in SSR Part I, complete all as specified and directed.

M & L 1000 ltrs rotational moulded polyethylene water sotrage tanks (cylindrical vertical with closed type) hoisted and fixed in position all as specified and direted.

Supply and fix in repairs Tank Nipple suitable for HDPE water tank. (Minimum weight 20mm- 45gms), complete all as specified and directed.

Supply and fix 15 mm thk Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

Supply and fix 20 mm thk Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

Supply and fix 40 mm dia LDPE Pipe of pressure rating 6 kg/cm2 laid in trenches, complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and directed.

Supply and fix in repairs Gun-metal, globe or gate valves 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed , complete all as specified and directed.

Supply and fix in repairs Ball valves 20 mm dia high epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 m m - 2 1 0 g m s), complete all as specified and directed.

M & L for point wiring for one light /fan point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FR cable controlled by one way switch, drawn through PVC Concealed/surface conduit with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly and sunken cast pressed steel terminal box fixed flush to wall of not less than 1.6 mm thick for mounting of fittings such as switch, socket and speed regulator with 3 mm thick Laminated bakelite sheet (Make' Hylum') cover all as specified and directed.

All as per Ser item No.130 above but for 5 amps socket on same board with other switches

All as per Ser item No.130 above but for 5 amps socket on independent board.

All as per Ser item No.130 above but with 2.5 sqmm cables for 15 amps switch socket combination outlet on independent board complete all as specified and directed.

M & L for point wiring for one light/fan point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FR cable controlled by one way switch, drawn through and including PVC casing caping with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly and sunken cast pressed steel terminal box fixed flush to wall of not less than 1.6 mm thick for mounting of fittings such as modular switches, sockets and regulators with Modular PVC flush box and Modular White Cover plate with frame all as specified and directed including taking down old unserviceable point wiring, complete all as specified and directed.

All as per Ser item No.134 above but for 5 amps socket on same board with other switches, complete all as specified and directed.

All as per Ser item No.134 above but for 5 amps socket on independent board, complete all as specified and directed.

All as per Ser item No.134 above but with 2.5 sqmm cables for 15 amps switch socket combination outlet on independent board complete all as specified and directed.

Supply and fix in replacement of Modular switch 1 way 6A, 1 module, complete all as specified and directed.

Supply and fix in replacement of Modular switch 1 way 16A, 1 module, complete all as specified and directed.

Supply and fix Socket outlet 2 in 1, 5 Pin, 5/6 Amps, complete all as specified and directed.

Supply and fix switch socket combination outlet flush type, 5 Pin, 5 amps, complete all as specified and directed.

Supply and fix switch socket combination outlet universal type 5 pin 5/16 amps, complete all as specified and directed.

Supply and fix ceiling rose surface backelite 65x50 mm having 3 terminals, complete all as specified and directed.

Supply & fix Basic all purpose surface and wall mounted LED batten 20W 4ft with polycarbonate housing & integrated electronic driver. Make: of Havells cat no. LHEXACP7FN1W020 or equivalent Bajaj/surya/philips

Supply & fix Basic all purpose surface and wall mounted LED batten 10W 2ft with polycarbonate housing & integrated electronic driver. Make: of Havells cat no. LHEXACP7FN1W010 or equivalent Bajaj/surya/philips

S & F MCB DB Single pole and neutral 4 way Single door with 200 amps rated bus bar , complete all as specified and directed.

S&F Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single pole and neutral and current carrying capacity 32 Amps in the MCB DB complete with connection testing and commissioning.. Make: Havells/Legrand/L&T/Merlin Gerin/Standard

S & F Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.. Make: Havells/Legrand/L&T/Merlin Gerin/Standard

Supply and fixing in replacement of LED Bldg light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with GI Pipe 40 mm dia bracket made out 120 degree in shape with 2 Nos GI strip clamps, nut bolts and washers all as directed

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, not more than 50Watt, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including provision of fan hook all as directed

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 225 mm with making hole on wall surface all as drected

Supply and fix light duty exhaust fan, steel body AC single Phase. 230V of size 225mm sweep with, blades, and frame and louvers, complete all as specified and directed.

M/L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including excavation and earth work and testing on completion all as directed

S&F House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos 90 degree bends. M.S.hook and stay or guy, complete all as specified and directed.

Supplying and fixing in replacement of 1100 volts grade heavy duty cable PVC insulated multi stranded aluminium conductor of 2 core x 10 Sq mm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable flat or circular all as directed

S&F in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq mm 2 core, complete all as specified and directed.

M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and as directed.

Supply, lay and fix in replacement of 40 mm bore galvanized iron water tubing low grade including all fittings and fixed/ laid in trenches or on poles complete all as specified and directed. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

M/S MOHANPASARI

M/s Brahamaputra Wood Industries

D G Corporation

Anil Kumar Sarmah

SUBHASISH NATH

M/S Manjit Singh

M/S Deep-Jeet