New Construction Of Blood Bank Unit Building At General Hospital Ahwa , Ta. Ahwa - Dist - Dang.

Name of work: New Construction Of Blood Bank Unit Building At General Hospital Ahwa , Ta. Ahwa - Dist - Dang.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing laying controlled cement concrete M-250 work with curing

complete including the cost of form work and excluding the rate of

reinforcment for reinforced concrete work in.

1 90.00 For Slabs,landing,shelves,Balconies, etc. 6967.71 #NAME? Cum

Providing laying controlled cement concrete M-250 work with curing

complete including the cost of form work and excluding the rate of

reinforcment for reinforced concrete work in.

2 89.00 For Beams, Girders and Cantilever etc. 6545.53 #NAME? Cum

Providing laying controlled cement concrete M-250 work with curing complete

including the cost of necessary form work (MS props or MS H-frames ) and

including the rate of reinforcement for reinforced concrete work in.

3 40.00 (D ) Shear wall/Columns, pillars posts and struts square, rectangular, polygonal 6071.84 #NAME? Cum

Providing laying controlled cement concrete M-250 work with curing

complete including the cost of form work and excluding the rate of

reinforcment for reinforced concrete work in.

For Coping, Lintel, Sill

Providing laying controlled cement concrete M-250 work with curing

complete including the cost of form work and excluding the rate of

reinforcment for reinforced concrete work in.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing laying controlled cement concrete M-250 work with curing complete

including the cost of form work and excluding the rate of reinforcment for

reinforced concrete work in.

For (D) Walls, Pardi

Providing laying controlled cement concrete M-250 work with curing complete

including the cost of necessary form work (MS props or MS H-frames ) and

including the rate of reinforcement for reinforced concrete work in.

(D ) Shear wall/Columns, pillars posts and struts square, rectangular, polygonal

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including

bending, binding and placing in position complete.

8 33815.00 Second Floor 79.43 #NAME? Kg

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including

bending, binding and placing in position complete.

9 2730.00 Terrace Floor 80.50 #NAME? Kg

Brick work using Common burnt clay building bricks having crushing strength

not less than 35 kg./sq.cm. in cement mortar 1:6 (1 cement : 6 fine sand)

10 217.00 (B ) Conventional 4661.12 #NAME? Cum

Brick work using Common burnt clay building bricks having crushing strength

not less than 35 kg./sq.cm. in cement mortar 1:6 (1 cement : 6 fine sand)

11 44.00 (B ) Conventional 4703.89 #NAME? Cum

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Half brick masonry in common brunt clay building bricks having crushing

strength not less than 35Kg/Sq.Cm.in Cement mortar1:4(1-Cement:4-coarse

12 10.00 (B) Conventional 710.74 #NAME? Smt

Designing, Providing and fixing alluminium colour anodized Double leaf Partly

Glazed Partly paneled shutters door having standared extruded alluminium

colour anodized door lock rail of alluminium section (Domal Section or

Equivalent Make) (Min. member Thikness 2.00-3.00mm) and top rail & vertical

memberof alluminium section (Domal Section or Equivalent Make) (Min.

member Thikness 2.00-3.00mm) and bottom rail per door of (Domal Section or

13 21.00 Equivalent Make) (Min. member Thikness 2.00-3.00mm) and 6mm thick glass 2379.00 #NAME? Smt

and providing rubber gasket and glazing clips around the glass and 8mm thick

Prelaminated High Density Fibre Board Paneled including providing Mortice

lock, SS handels, SS hinges, door closer including all labour and equipments

etc complete. as per detailed drawings and instructions of an Architect/ EIC.

Designing, Providing and fixing alluminium colour anodized Single leaf Partly

Glazed Partly paneled shutters door with having standared extruded

alluminium colour anodized door lock rail of alluminium section (Domal

Section or Equivalent Make) (Min. member Thikness 2.00-3.00mm) and top rail

& vertical memberof alluminium section (Domal Section or Equivalent Make)

(Min. member Thikness 2.00-3.00mm) and bottom rail per door of (Domal

14 8.00 Section or Equivalent Make) (Min. member Thikness 2.00-3.00mm) and 6mm 3679.00 #NAME? Smt

thick glass and providing rubber gasket and glazing clips around the glass and

8mm thick Prelaminated High Density Fibre Board Paneled including providing

Mortice lock, SS handels, SS hinges, door closer including all labour and

equipments etc complete. as per detailed drawings and instructions of an

Architect/ EIC.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Designing, Providing and fixing 35 mm thick Decorative type Water proof flush

door Single leaf shutters with solid core construction with frame of Aluminium

(Domal Section or Equivalent Make, Min. member Thikness 2.00-3.00mm)

section and ply-wood face panels, 1.0 mm thick laminate on both sides

including Stainless steel fixtures and fastening like Mortice lock, SS handels,

door closer,SS Hinges,S.S. Stopper etc, including primer coat of approved

quality and two coats of oil painting of door bedding patti etc complete, as per

architectural drawings and the directions of Engineer-in-charge. (Must not

Contain added urea formaldehyde resigns)

Designing, Providing and fixing 35 mm thick Decorative type Water proof flush

door Single leaf shutters with 1 nos of Vision panel of size 300 x 700 mm solid

core construction with frame of Aluminium (Domal Section or Equivalent

Make, Min. member Thikness 2.00-3.00mm) section & 8mm thick fixed glass

on top portion and ply-wood face panels, 1.0 mm thick laminate on both sides

16 8.16 including Stainless steel fixtures and fastening like Mortice lock, SS handels, 4088.48 #NAME? Smt

door closer,SS Hinges,S.S. Stopper etc, including primer coat of approved

quality and two coats of oil painting of door bedding patti etc complete, as per

architectural drawings and the directions of Engineer-in-charge. (Must not

Contain added urea formaldehyde resigns)

Designing, Providing and fixing 35 mm thick Decorative type Water proof flush

door Double leaf shutters with 1 nos of Vision panel of size 300 x 700 mm solid

core construction with frame of Aluminium (Domal Section or Equivalent

Make, Min. member Thikness 2.00-3.00mm) section and ply-wood face panels,

1.0 mm thick laminate on both sides including Stainless steel fixtures and

fastening and SS handle,S.S. Stopper including primer coat of approved quality

and two coats of oil painting of door bedding patti etc complete, as per

architectural drawings and the directions of Engineer-in-charge. (Must not

Contain added urea formaldehyde resigns)

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing and fixing FRP Frame size 100 x 50 mm and 28 mm thick FRP Depress

panel shutter Jainex make or eq. having extra reinforcement on side and edges

and in gel coat finish. The core of the shutter is to be filled up with injected fire

retardant grade polyurethane foam done insitu along with embedded wooden

pieces for stiffening and also for taking hinges and fixtures. The whole FRP

18 2.00 Frame and shutter is to be water proof, weather proof, termite proof and 2377.76 #NAME? Smt

resistance to mid acid/Alkali. Rates are to be inclusive S.S. hinges with

necessary screws and aluminum fixture and festering.

Providing and fixing of 120mins Hollow metal fire rated doors Single/Double

leaf shutters tested and certified design as per IS 3614 part-2 & BS 476 part-20

& 22 at CBRI, Roorkee for its stability and integrity. Galvanized steel sheet to be

used should be confirming to IS 277. Recommended fire door design should be

similar to earlier test evidence from CBRI - Roorkee with or without vision lite

for maximum fire rating of 2hrs. Doors should be finished in Thermosetting

Powder Coating with film thickness of 60 microns approx. in desired RAL

Shades. The manufacturer company shall be a member of IGBC and ISO 9001-

2015 certified. The offered test certificate should either carry it's Validity or

certificate must not be older than 5 years from CBRI / NABL Accredited Lab

Door frame shall be Single rebate profile of minimum size 143mm X 57 mm

made out of 1.60mm minimum thick galvanized steel sheet. Door Frame shall

19 3.00 be Butt jointed and field assembled with bolt. The frames should be finished 18745.60 #NAME? Smt

with Thermosetting Powder Coating in desired RAL Shade. Frame should have

provisions and necessary reinforcement for receiving appropriate hardware.

Frames should be provided with back plate bracket to receive anchor fasteners

(comprises of 10mm dia with minimum embedment depth 50mm polyamide

PA6 grade sleeves) for installation on a finished plastered wall opening. Once

frame installed may be grouted with cement slurry by civil contractor if desired.

Door leaf shall be minimum 46mm thick fully flush double skin door with vision

lite. Door leaf shall be manufactured from 1.2mm minimum thick galvanised

steel sheet. The internal construction of the door should be rigid reinforcement

pads for receiving appropriate hardware. The infill material shall be mineral

wool treated with Viper FRS 881 LH for insulation.

All doors shall be factory prepped for receiving appropriate hardware and

provided with necessary reinforcement. The edges should be interlocked with a

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Designing,Providing & Fixing Three Track extruded aluminium slide windows

having colour anodised sections (of Domal Section or Equivalent Make) as per

design .The top of the window shall be fixed with 5 glass mm thick clear float

Glass . The cost is including of locking arrangement, Roller, Bearing, 5 mm thick

clear float toughned glass with fitting & fixture, black EPDM & transperent

20 53.00 silicon Sealant on outer framing, all necessary accessories including Mosquito 5911.53 #NAME? Smt

Shutter conststing of S.S.wire gage of avaerage width aperature 1.4 mm with

wire of dia meter 0 .63mm necessary cutting and making good etc. for

window.etc. complete as per detailed drawings and instructions of an

Architect/ EIC..

Designing,Providing & Fixing Four Track extruded aluminium slide windows

having colour anodised sections (of Domal Section or Equivalent Make) as per

design. The top of the window shall be fixed with 5 glass mm thick clear float

Glass . The cost is including of locking arrangement, Roller, Bearing, 5 mm thick

clear float toughned glass with fitting & fixture, black EPDM & transperent

21 50.00 silicon Sealant on outer framing, all necessary accessories including Mosquito 6954.86 #NAME? Smt

Shutter conststing of S.S.wire gage of avaerage width aperature 1.4 mm with

wire of dia meter 0.63mm necessary cutting and making good etc. for

window.etc. complete as per detailed drawings and instructions of an

Architect/ EIC.

Providing and fixing standared extruded of alluminium section of size 63.50 x

38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with colour anodized alluminium frame

22 20.00 with 5 mm thick transparent bronze colour tinted float glass as details etc 1525.00 #NAME? Smt

complete for Fix window.

Providing and fixing standard extruded of alluminium section of size 63.0 mm x

38.10 mm x 1.2 mm/as per design/drawing with colour anodized alluminium

23 1.00 frame for ventilation with 5 mm thick frosted glass as per details etc complete 1175.56 #NAME? Smt

for ventilation.

Providinfg and fixing Safety grills/doors of required pattern for windows /

Door/ ventilators using M.S. flats/bar/box sections as per design and drawing

24 2852.00 including one coat of primer and two coats of matt finished oil painting etc 131.83 #NAME? Kg

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing and fixing Fly proof galvanised M.S. wire gauge of I.S.l gauge

designation 85 G. with wire of dia.0.56 mm to windows and celevating

25 20.00 windows including 60 x 20mm beading of teak wood. 685.91 #NAME? Smt

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,

channels, plates etc., including welding, grinding, buffing, polishing and making

curvature (wherever required) and fitting the same with necessary stainless

steel nuts and bolts complete, i/c fixing the railing with necessary accessories &

stainless steel dash fasteners , stainless steel bolts etc., of required size, on the

top of the floor or the side of waist slab with suitable arrangement as per

approval of Engineer-incharge.

(for payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing 150 mm wide, approved quality chicken wire mesh at

junction of brick work and RCC work or two dissimilar surfaces, at all heights

27 250.00 fixed by nails, rowal plugs or tag by cement mortar 1:3 before applying the 281.79 #NAME? Smt

plaster, including curing, scaffolding all complete as directed.

Providing & laying 10mm thick cement plaster in single coat on ceilings and

sofits of stairs for interior plastering finished even and smooth in C M 1:4 (

28 596.07 cement 4 coarse sand) including finishing etc complete. 221.61 #NAME? Smt

a) Second Floor

Providing 15 mm thick cement plaster in single coat on brick/concrete wall for

interior plastering finished even and smooth in [I] Cement mortar 1:3 (1

29 1666.16 cement : 3 fine sand). 269.50 #NAME? Smt

Providing 20mm thick sandface cement plaster on walls at all height consisting

of 12mm. Thick backing coat of C.M. 1:3 (1cement: 3 sand) and 8mm. Thick

finishing coat of C.M. 1:1 (1cement:1 sand) including patta,patti, plaster drip

and moulding as per design etc. complete.

All Floor & Height

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing cement vata (10cm.x10cm.size) quarter round in cement mortar 1:1

31 58.00 including neat cement finishing, watering etc. complete. 24.28 #NAME? Rmt

Applying two coats of Birla or Asian or equivalent acrylic lapy ( putty)and two

coats of primer of aproved brand and manufacture and painting (three coats)

with plastic emulsion paint of approved brand and manufacture including

32 597.00 thoroughly brushing the surface free from mortar dropping and other foreign 131.75 #NAME? Smt

matter and sand papered smooth for Ceiling as directed by engineer in charge.

Applying two coats of Birla or Asian or equivalent acrylic lapy ( putty) & two

coats of primer of aproved brand and manufacture on Wall surface to give an

even shade including painting (two coats) with plastic emulsion paint of

33 1666.16 approved brand & manufacture including thoroughly brushing the surface free 125.94 #NAME? Smt

from mortar dropping and other foreign matter and sand papered smooth for

ceilling as directed by engineer in charge.

Finishing wall with weather proof exterior Acrylic emulsion paint on wall

surface in two coats & One coat of primer of white cement material to give an

34 834.82 required shade after thoroughly brushing the surface to remove all dirt, and 122.14 #NAME? Smt

remains of loose powdered materials etc. complete.

Painting two coats (including priming coat)on old/ new steel and other metal

surface with enamelpaint brushing, interior to give an even shade including

cleaning the surface of all dirt, dust, and other foreign matter.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling of existing flooring

and jointed with color cement slurry including finised with flush pointing &

cleaning the surface etc. complete for light shade

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers

of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse

37 53.00 sand) and jointed with white cement slurry. 1195.02 #NAME? Smt

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing and laying Vitrified 8 to 10 mm thick tiles in flooring laid on 20 mm.

Thick cement mortar 1:6 ( 1 cement : 6 coarse sand) or L.M. 1:1.5 laid on new

surface or fixing on existing flooring by adhesive material and jointed with

38 3.00 coloured cement slurry including finished with flush pointing & cleaning the 1472.91 #NAME? Smt

surface etc complete as approved by Architect office / Engineer in charge.

Providing & fixing Mirror polished granite stone for Sill & jems, Door frame,

lift clading,plateform, facia, shelf etc. over base coat of 20 mm cement morter

1:2 including cutting rounding edges ( Quarter round )/ Chamfer as per

architect instruction & pointing with grey cement slury /adhesive if required

incl. colour pigment rubbing polising sand blasting, including making katara at

corner Etc. Comp.As per architectural Drawing & instrucion By engineer in

Providing and fixing double polished machine cut 20 mm thick Granite Stone

Partition for urinal with rounding and polishing of the edges etc including

making ghissi in brick wall and filling gap with cement slurry and cement

mortar 1:3 (1-cement : 3 -coarse sand) etc. complete in true line and level as

directed by EIC.

Construction sandwich type kitchen /washbasin platform counter 75CM/as

required wide and 70 CM/as required high resting on 25 mm thick sandwich

type polished kota stone support as per drawing or as required , bottom 25mm

polished kota stone with 18 to 20 mm thick polished black granite stone top

with same facia patti including cut out for sink/washbasin ,as approved by

Engineer - in - charge including finishig etc. complete as directed.(for payment

only plan area measured)

Providing and laying Machine cut free Edges double Polished Kota stone slab

for Shelves in cupboard and walls in single peace 25mm thick including cutting

grooves in walls and fixing the stone neat cement slurry in true line and level

and making good the groove with C M 1:3 as as directed by Engineer in charge

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Mirror polishing on marble work/Granite work/stone work/Kota stone where

43 20.00 ever required to give high gloss finish complete. 404.30 #NAME? Sqm

Providing and laying polished Kota stone slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-

Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry

44 20.00 mixed with pigment to match the shade of slab including rubbing and polishing 1019.39 #NAME? Sqm

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray cement slury mixed with

45 10.00 pigment to match the shade of slab including rubbing and polishing etc. 1173.09 #NAME? Sqm

Providing and fixing Flexible Homogeneous Anti Bacterial Vinyl Flooring of With

treatment of Polyurethane Reinforced Surface, Densely Compacted, Anti-

Bacterial and fungicidal and Antistatic having thickness of 2.00mm With weight

46 40.00 of 3150 g/m2 including curvature surface at the junction of flooring and wall 3151.20 #NAME? Sqm

and all corners.

Providing and laying water proofing treatment on terrace with china mosaic

floor including applying neat cement slurry 2.75kg/cm2 on cement admixed

with water proofing component after cleaning the surface /laying cement

concrete with brick bat 75 mm to 100 mm thick with 50% of C.M. 1:5 to

required slope including ramming at junction of wall and slab after two days of

47 713.00 proper curing applying broken china mosaic flooring for plain and curve surface 1165.54 #NAME? Sqm

12mm to 20mm white colour broken piece of glazed tiles to be laid over

12mm thick cement mortar bedding of CM (1:3) to plain and slop and to be

tampered to bring mortar cream up to surface with using white cement and

incl. Rounding of junctions and extending them up to 30 cm along the wall and

curing with bends any pa erns or design as per drawing and direc on incl.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing composite water proofing treatment to floor and walls of water tank,

w.c. & bath area, through approved agencies preparing floor and wall for water

proofing work/ by chasing/cutting as per the companies requirement. First by

providing and applying cementitious crystalline based waterproofing for

concrete rafts, walls, water tanks, slabs, concrete floors etc. with Epoxy

coating. The application to be done from positive side on a wet open pore

concrete surface with brush @ to 1 kg/ sqm as per mfg.'s specification. After

testing with ponding after 7 days, a layer of plaster with waterproofing

48 3.00 compound/ admixture about 25 mm thick in the floor / depression and about 367.64 #NAME? Sqm

18 mm on the sidewalls / depression upto the floor level shall be provided

over the surface treated with crystalline powder. The waterproof plaster about

18 mm thick to be continued on the walls above the floor level for a height of

600 mm with surface suitable to receive further finishing treatment all

complete as per companies specifications and instructions and as directed for

all heights and floors. The round vata shall be included in this in sq.mt. and

shall be taken upto top of round on wall.

Providing and filling with scrap of AAC block (good quality) as a cinder as

directed by engineer in charge in sunks in layers of 15 cm thk including

49 1.00 watering placing ramming well etc. as directed. 2525.00 #NAME? Cum

Providing laying and jointing in true line and level 160MM diameter U.P.V.C.

SWR Type B pipe conforming to IS 13592-1992 with one end plain and other

end socketed with rubbering, & fitting conforming to ISI 14735-1999 of

approved make for Horizontal drainage line below ground level, including

50 10.00 necessary fittings such as bends, tees, rubber packing ring etc. testing of 834.38 #NAME? Rmt

pipeline, jointing with adhesive solvent cement including cost of

excavation,lowering and laying pipes, refilling the trenches, jointing materials

and all other necessary fixtures fitted, air and water tight testing of the line etc.

complete as directed.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing laying and jointing in true line and level 75 diameter U.P.V.C. SWR

Type B pipe conforming to IS 13592-1992 with one end plain and other end

socketed with rubbering, & fitting conforming to ISI 14735-1999 of approved

make for Horizontal drainage line below ground level, including necessary

51 8.00 fittings such as bends, tees, rubber packing ring etc. testing of pipeline, jointing 404.00 #NAME? Rmt

with adhesive solvent cement including cost of excavation,lowering and laying

pipes, refilling the trenches, jointing materials and all other necessary fixtures

fi ed, air and water ght tes ng of the line etc. complete as directed.

Providing laying and jointing in true line and level 110 diameter U.P.V.C. SWR

Type B pipe conforming to IS 13592-1992 with one end plain and other end

socketed with rubbering, & fitting conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size

mm diameter x 149 mm length x 145 mm high at every 2000 mm center to

center or shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pies and joints and jointed with

adhesive solvent cement including cost of all materials.

Providing and fixing to wall, ceiling and floor 10.0 Kg.F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with

53 150.00 special falnge compression type fittings, wall clips etc. including making good 339.05 #NAME? Rmt

the wall, ceiling and floor.(G)110 mm

Providing and fixing wall hung water closet SLS-WHT-5953 (Rimless wallhung

WC with PP soft close seat cover,Hinges,Accessories set size 350x545x380

mm.)of jaquar or equivalent including all neccessary accessories for fixing

54 1.00 etc. complete.(brand and sample will be selected and approved by consultant) 18104.25 #NAME? No.

Providing and fixing Metropole for flushing of wall hung water closet of jaquar -

FLV 1089 or equivalent (Metropole flush valve dual flow 32mm size concealed

body with exposed shut off provision and round flange (3.0/6.0 lit per

flushing)including all neccessary accessories for fixing etc. complete.(brand

and sample will be selected and approved by consultant)

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing and fixing Health faucet -ALD-565(Jaquar) with 1 Meter long easy flex

tube in chrome finish and wall hook and two way bibcock with wall flange of

56 1.00 jaquar -FLR 5041N or equivalent all neccessary accessories for fixing etc. 3960.21 #NAME? No.

complete.(brand and sample will be selected and approved by consultant)

Providing and fixing wash basin counterfit (under counter) Jaquar-FLS WHT

5701(555x425x195mm-Oval shape)/ equivalent approved make , pillar cock

jaquar-FLR 5001B/equivalent approved make , angle valve jaquar-FLR 5053N

with wall flange/equivalent approved make ,waste coupling Jaquar-ALD 705L13

57 1.00 ,32 mm full thread 130mm height and bottletrap of jaquar make ALD-769L 14538.95 #NAME? No.

size32mm 300x190mm long wall connection pipes and wall flange including,

bottle trap making hole in granite for wash basin etc. complete job as per

satisfaction of engineer in charge.

Providing and fixing ( 600 X 450 X 150 mm) size vitreous china laboratory sink

with CI or MS brackets painted white including cutting holes in wall and making

good the same 40 mm dia CP waste couplin rails etc. complete.

Providing and fixing 15mm C.P brass Bib tap with C.P brass threaded flange

complete, including cutting and making good the walls wherever required as

59 7.00 per technical specifications, drawings and directed by the Project Manager. 2907.79 #NAME? No.

(jaquar FLR -5047N) or Equivalent make.

Providing and fixing 50mm dia. gun metal check or non return full way wheel

valve in pipeline of approved quality etc. complete as directed by Engineer In

Providing and fixing 40mm dia. gun metal check or non return full way wheel

valve in pipeline of approved quality etc. complete as directed by Engineer In

Providing and fixing 25mm dia. gun metal check or non return full way wheel

valve in pipeline of approved quality etc. complete as directed by Engineer In

62 1.00 charge. 420.63 #NAME? No.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing & fixing 75 mm dia.SWR PVC " Cowl Vent" with adhesive solvent

cement etc. in true line and level etc. complete as directed by Engineer In

63 1.00 charge. 90.90 #NAME? No.

Providing & fixing 110 mm dia.SWR PVC " Cowl Vent" with adhesive solvent

cement etc. in true line and level etc. complete as directed by Engineer In

64 1.00 charge. 101.00 #NAME? No.

Providing , Laying and jointing in true line and level 63 mm dia UPVC pipe (SCH-

80) line including fitting of PRINCE / SUPREME /ASTRAL/FINOLEX or equivalent

as approved by Engineer in-Charge.Pipe Shall be Fixed on the wall with the help

65 10.00 of clamp at every two meter C/C or shall be concealed as directed including 252.50 #NAME? Rmt

testing of pipe and joints and fixing the same with adhesive solvent ,including

cost of all material

Providing , Laying and jointing in true line and level 50 mm dia UPVC pipe (SCH-

80) line including fitting of PRINCE / SUPREME/ ASTRAL/FINOLEX or equivalent

as approved by Engineer in-Charge.Pipe Shall be Fixed on the wall with the help

66 10.00 of clamp at every two meter C/C or shall be concealed as directed including 195.67 #NAME? Rmt

testing of pipe and joints and fixing the same with adhesive solvent ,including

cost of all material

Providing , Laying and jointing in true line and level 40 mm dia UPVC pipe (SCH-

80) line including fitting of PRINCE / SUPREME/ASTRAL/FINOLEX or equivalent

as approved by Engineer in-Charge.Pipe Shall be Fixed on the wall with the help

67 10.00 of clamp at every two meter C/C or shall be concealed as directed including 148.12 #NAME? Rmt

testing of pipe and joints and fixing the same with adhesive solvent ,including

cost of all material.

Providing , Laying and jointing in true line and level 25 mm dia UPVC pipe (SCH-

80) line including fitting of PRINCE / SUPREME/ASTRAL/FINOLEX or equivalent

as approved by Engineer in-Charge.Pipe Shall be Fixed on the wall with the help

68 6.00 of clamp at every two meter C/C or shall be concealed as directed including 91.84 #NAME? Rmt

testing of pipe and joints and fixing the same with adhesive solvent ,including

cost of all material.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing , Laying and jointing in true line and level 15mm dia UPVC pipe (SCH-

80) line including fitting of PRINCE/ SUPREME /ASTRAL/FINOLEX or equivalent

as approved by Engineer in-Charge.Pipe Shall be Fixed on the wall with the help

69 12.00 of clamp at every two meter C/C or shall be concealed as directed including 72.65 #NAME? Rmt

testing of pipe and joints and fixing the same with adhesive solvent ,including

cost of all material.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR

13.5)PIPE having National Sanitation Foundation (NSF) seal for potable water

70 10.00 of following dia. nominal bore tube fittings and clamps including making good 253.82 #NAME? Rmt

the wall, ceiling and floor etc. complete. 25 mm dia.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR

13.5)PIPE having National Sanitation Foundation (NSF) seal for potable water

71 10.00 of following dia. nominal bore tube fittings and clamps including making good 170.36 #NAME? Rmt

the wall, ceiling and floor etc. complete. 15 mm dia.

Providing and fixing 600mmx450mm bevelled edge mirror of superior glass

mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs

with C.P brass screws (B) 600mmx20mm size.

Providing and fixing wall mounted paper towel dispencer AISI 304 stainless

steel satin finish of jaquar make -PTD SAP-DTO1106CS CAPACITY 400-600 C/Z

towels etc complete as directed by Engineer in charge.

Providing and fixing Soap dispencer with glass bottle of jaquar make -ACN-

74 1.00 1135BN etc complete as directed by Engineer in charge. 1653.37 #NAME? Nos

Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 100 mm diameter

with jali of the following nominal diameter of self cleansing design with C.I.

75 2.00 Scread down or hinged grating including the cost of cutting and making good 613.92 #NAME? Nos

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing and fixing S.W. gully trap with C.I. grating brick masonary chamber

and water tight C.I. cover with frame of 300 mm x 300 mm size (Inside) with

76 5.00 standard weight (I) Square mouth traps (B) 150 mm x 100 mm size P of 1246.92 #NAME? Nos

Construction of brick masonry chamber inside dimension as below & required

depth for drainage pipeline, with required inlet and outlet for under ground C.I.

inspection chamber and with 230 mm thick brick wall having crushing strength

not less than 35 Kg. /sq.cm. in C.M.1:5 (1cement : 5 sand) C.I. Cover with

frame(Light duty 455 mm X 610 mm internal dimension, total weight of cover

with frame not less than 38 Kg. ( weight of cover 23 Kg and weight of frame

Kg),R.C.C. top slab with 1:2:4 ( 1 cement : 2 coarse sand : graded stone

aggregate 20mm nominal size B.T. Kapchi) foundation concrete 1:5:10) (1

cement : 5 sand :10graded stone aggregate 40 mm nominal size) inside plaster

15mm thick in cement mortar 1:3 (1cement : 3 sand ) finished smooth with

floating coat of neat cement slurry on walls and bed concrete curing etc. in true

line and level/slope etc. complete as directed by Engineer In charge.

Inside dimension 600mm x850 mm and 450 deep or more for pipe line with

one or two inlets.

Extra over above items for every additional depth of 0.1m or part there of

beyound 450 mm depth for brick masonry chamber

For 455 mm x 610 mm size

Providing erecting and fixing double coated ISI water tank of required capacity

each with all necessary fittings and connection etc. complete on terrace.

79 20000.00 3.95 #NAME? Litre

Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Building Signage :

Supply, Installation, Testing and commissioning of ACP Background board of

required thickness, smooth matt finish, illuminated with yellow and blue led

and face glow letters above it. The frame shall be offset from the glazing and

shall be supported by the floor beams on Terrace and Terrace Floor. The

peripheral gap space between front side and the backing shall also be covered

81 6.00 with acrylic sheets, having a width of 500 to 700 mm. Rate to include cost of 11954.36 #NAME? Sqm

steel framework, Aluminium framework and inclusive of two coats of primer

and anti-corrosive paint. Contractor shall prepare the detailed shop drawings

for the item and same shall be approved before execution. Complete for all

height, levels, floors in all shapes as per the Architectural drawings and

directions of engineer-in-charge.

Supplying And Fixing Acrylic Name Board : 12" X 5" Providing and fixing sign

board made of acrylic sheet and fixing on door wall in first or second alphabet

82 2.00 as instructed in radium material .Including all materials and labour 1540.25 #NAME? Sqm

etc.complete as per detail drawing and instruction of engineer-in charge.

Charges for making holes in RCC all Dia. :-To carry out core cutting in locations

83 25.00 indicated by the consultants. 2020.00 #NAME? No.

Pro. and fixing single layer water proof gypsum board 12.5 mm thick sections

using water proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by

GI suspender channel of size 25 mm x 3 mm with intermediate channel og size

18 mm x 40 mm x 0.8 mm at 1220 mm center to center ceiling section of size

40 mm x 35 mm x 0.55 mm at 457 mm c/c and perimeter channel A of size

mm x 27 mm x 30 mm x 0.5 mm at edges & drops incl.paper tap sand sofit

cleat, anchor fastener, scoch bolt connecting cleat,joining compound top coat

on ceiling incl.making necy.opening for light fitting,diffuser etc. comp. as per

detail drawing as directed.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced

Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and

patterns having moisture content less than 2%, humidity resistance of 99%,

NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-

1970 and light reflectance of 85% (minimum) to be laid in true horizontal level

suspended on interlocking metal T-Grid of hot dipped galvanised iron section of

0.33mm thick (galvanized @ 120 grams per sqm including both sides)

comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of

size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size

85 228.00 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, 2229.07 #NAME? Sqm

suspended from ceiling using galvanised mild steel items (galvanizing @

grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners,

mm dia fully threaded hanger rod upto 1000 mm length and L-shape level

adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size

24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition

with the help of plastic rawl plugs at 450 mm center to center and 40 mm long

dry wall wood screws. The work shall be carried out as per specifications,

drawing and as per directions of the Engineer-in-Charge.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles

having Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for

Extra Strength The Light weight calcium silicate ceiling tiles shall have , light

reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity

resistance and also having thermal conductivity0.043° w/m KC.for the best

thermal Insulation . The Light weight calcium Silicate tile shall be of approved

texture Fine fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe

having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on

true horizontal level suspended inter locking metal grid of hot dipped

galvanized steel sections (galvanizing @120 grams per sqm including both side)

consisting of main ‘T’ runner suitably spaced at joints to get required length

and size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm

86 130.00 centre to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm 1674.15 #NAME? Sqm

(Minimum) sheet spaced 1200mm along spaced between main ‘T’ at 600mm

centre to centre to form agrid of 1200X600mm and secondary cross ’T’ of

length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to

be interlocked at middle of the 1200X600mm panel to form grid of size

600X600mm resting on periphery walls/partitions on a perimeter wall angle

pre-coated steel of size (24X24X3000mm made of 0.40mm thick (minimum)

sheet with the help of rawl plugs at 450mm centre to centre with 25mm long

dry wall screws @ 230mm interval and laying 15mm thick Densified edges light

weight calcium silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid including, cutting /making opening for

services like diffusers, grills, light fittings, fixtures, smoke detectors etc.,

wherever required, Main ‘T’ runners to be suspended from ceiling using G.I.

Providing and of size and

laying 25X35X1.6mm

fixing 50 mm fixed to expansion

thick ceiling withjoint

by hydro cell 50mm

rigid UV resistance with high performance laminated closed cell polythene

foam joint filler in sheet foam as directed, etc. complete.

Applying and providing Expansion joint sealing System on 100 mm vide joint

including cleaning of exansion joint by mechanical means provision of adhesive

and flexible membrane with required bond length as per menufracturer

88 2.00 specification and 4mm thick alluminium strip covering with one side sloted and 4772.00 #NAME? Sqm

bolted with suitable system, inclusive of all manpower, machinery and material

as per specification and as directed.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Demolition of Brick work and stone masonry including stacking of serviceable

materilas and disposal of unserviceable materials with all lead and lift.(ii) In

Demolition including stacking of service able material as and disposal of

90 30.00 unserviceable materials with all lead and lift. (i) R.C.C. work 1137.19 #NAME? Cmt

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraves, holdfasts and other attachment etc. complete and

91 1.00 stacking them within all lead and lift.(ii) Exceeding 3 Sq.M. in area. 270.19 #NAME? No.

Dismentling steel work including distempering and stacking the materials with

92 90.00 all lead and lift. 3.94 #NAME? Kg

Dismentaling tiled of stone floors laid in mortar including stacking of

serviceable materilas and disposal of unserviceable materials with all lead and

Demolition of terrace including stacking of serviceable materilas and disposal

94 713.00 of unserviceable materials with all lead and lift.(i) Brick tile covering. 68.59 #NAME? Sqm

Dismentling wood work, wrought framed and fixed in frames trusses including

95 20.00 stacking the materials with all lead and lift. 1891.33 #NAME? Sqm

Dismentling C.I. pipes, PVC pipes, Upvc pipes, G.S.W.pipes and A.C. rain water

pipes with fittings and clamps including stacking the materials with all lead and

lift ( for any dia, of pipe)

Dismantling santtary fittings like wash basin . W.C. pan Indian and European

97 10.00 type, flushing tank etc. including stacking the materials with all lead and lift. 436.07 #NAME? No.

Dismentaling of sheet roofing including ridges hips valleys gutters etc.stacking

of serviceable materials and disposal of unserviceable material with all lead

and lift (i) G.I.sheet roofing

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Removing and scraping of old deteriorated plaster of any thickness fromm wall

/ R.C.C member including stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift

Dismentling expanded metal or I.R.C Fabric with necessary battens and

beadings including frame work, and stacking the serviceable materials with all

Demolition and disposal of unserviceable materials with all lead and lift.(i) PCC

Removing and scraping of Existing paint/putty including stacking of serviceable

material and disposal of unserviceable from site of work with all lead and lift

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and

false ceiling including disposal of unserviceable material and stacking of

serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and

under, including cutting the patch in proper shape, raking out joints and

preparing plastering the wall surface with white cement based polymer

modified self curing mortar, including disposal of rubbish, all complete as per

the direction of Engineer-In-Charge.

Chipping of unsound/weak concrete material from slabs, beams,columns etc.

with manual Chisel and/ or by standard power driven percussion type or of

approved make including tapering of all edges, making square shoulders of

cavities including cleaning the exposed

concrete surface and reinforcement with wire brushes etc. and disposal of

debris for all lead and lifts all complete as per direction of Engineer-In-Charge.

75mm average thickness

-----Item Same As Above----

106 38.00 50mm average thickness 204.54 #NAME? Sqm

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

-----Item Same As Above----

107 51.00 25mm average thickness 101.13 #NAME? Sqm

Cleaning of reinforcement from rust from the reinforcing bars to give it a total

rust free steel surface by using alkaline chemical rust remover of approved

make with paint brush and removing loose particles after 24 hours of its

108 200.00 application with wire brush and thoroughly washing with water and allowing it 6.58 #NAME? Metre

to dry, all complete as per direction of Engineer-In-Charge.

Bars upto 12 mm diameter

-----Item Same As Above----

109 200.00 Bars above 12 mm diameter 13.13 #NAME? Metre

Drilling suitable holes in reinforced or plain cement concrete with power driven

drill machine to a minimum depth of 100mm upto 200mm in RCC beams,

lintels, columns and slabs to introduce steel bars for sunshades/balconies

including fixing the steel bars in position using epoxy resin anchor grout of

approved make but excluding the cost of reinforcement, all complete as per

direction of Engineer-In-Charge.

Upto and including 12mm dia.

Providing, mixing and applying bonding coat of approved adhesive on chipped

portion of RCC as per specifications and direction of Engineer-In-charge

complete in all respect.

111 149.00 SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 112.66 #NAME? Sqm

kg cement per sqm of surface area mixed with specified proportion of

approved polymer.

-----Item Same As Above----

Epoxy bonding adhesive having coverage 2.20 sqm/kg

of approved make.

-----Item Same As Above----

113 83.00 25 mm average thickness in 2 layers. 468.65 #NAME? Sqm

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

-----Item Same As Above----

75mm thick in Grade M 25 with cement content not less

than 330 kg per cum

Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved

design mix concrete having the specified minimum characteristic compressive

strength [with ordinary portland cement, coarse sand and graded stone

aggregate of 10 mm maximum size in proportion as per design criteria]

including the cost of centering and shuttering at edges and corners etc. as

directed by Engineerin- Charge.

(Note: Rates shall include the providing necessary ground wires etc. The

levelling gauges, if used, shall be paid for separately. Payment under this item

shall be made only after proper wet curing has been done and surface has been

satisfactorily evaluated by sounding/ tapping with a blunt metal instrument.)

25mm thick in Grade M 25 with cement content not

less than 330 kg per cum

-----Item Same As Above----

50mm thick in Grade M 25 with cement content not

116 3.00 less than 330 kg per cum 918.42 #NAME? Sqm

-----Item Same As Above----

75mm thick in Grade M 25 with cement content not

117 7.00 less than 330 kg per cum 1299.66 #NAME? Sqm

Providing and injecting approved grout in proportion recommended by the

manufacturer into cracks/honey-comb area of concrete/ masonry by suitable

gun/pump at required pressure including cutting of nipples after curing etc.

complete as per directions of Engineer-in- Charge.

(The payment shall be made on the basis of actual weight of approved grout

Epoxy injection grout in concrete/RCC work of approved make

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra

under relevant item of work ) after drilling the hole of required diameter &

depth ,cleanning of the same ,providing /filling the hole with Injection Mortar

inserting reinforcement bar etc. complete as per Manufacturers & architects

instruction.The work shall be carried out by the technical workmens/agency

approved by the manufacturer and under technical supervision of

Manufacturer of Injection grout including all materials,tool tackles ,labour

(a) 8 mm. dia.bar -Holes 12mm dia Depth 100mm

Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra

under relevant item of work ) after drilling the hole of required diameter &

depth ,cleanning of the same ,providing /filling the hole with Injection Mortar

(HY 150 or approved equivalant),inserting reinforcement bar etc. complete as

per Manufacturers & architects instruction.The work shall be carried out by the

technical workmens/agency approved by the manufacturer and under technical

supervision of Manufacturer of Injection grout including all materials,tool

tackles, labour etc.complete.

(B) 10 mm. dia.bar -Holes 14mm dia Depth 200mm

Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra

under relevant item of work ) after drilling the hole of required diameter &

depth ,cleanning of the same ,providing /filling the hole with Injection Mortar

(HY 150 or approved equivalant),inserting reinforcement bar etc. complete as

per Manufacturers & architects instruction.The work shall be carried out by the

technical workmens/agency approved by the manufacturer and under technical

supervision of Manufacturer of Injection grout including all materials,tool

tackles, labour etc.complete.

(C) 12 mm. dia.bar -Holes 16mm dia Depth 240mm

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra

under relevant item of work ) after drilling the hole of required diameter &

depth ,cleanning of the same ,providing /filling the hole with Injection Mortar

(HY 150 or approved equivalant),inserting reinforcement bar etc. complete as

per Manufacturers & architects instruction.The work shall be carried out by the

technical workmens/agency approved by the manufacturer and under technical

supervision of Manufacturer of Injection grout including all materials,tool

tackles, labour etc.complete.

(D) 16 mm. dia.bar -Holes 20mm dia Depth 320mm

Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra

under relevant item of work ) after drilling the hole of required diameter &

depth ,cleanning of the same ,providing /filling the hole with Injection Mortar

(HY 150 or approved equivalant),inserting reinforcement bar etc. complete as

per Manufacturers & architects instruction.The work shall be carried out by the

technical workmens/agency approved by the manufacturer and under technical

supervision of Manufacturer of Injection grout including all materials,tool

tackles, labour etc.complete.

(E) 20 mm. dia.bar -Holes 24mm dia Depth 400mm

Providing and wet drilling accurate and clean holes of 37-300 mm range

without vibration through Hilti P-U ABRASIVE CORE BIT and Rig-based drilling

system using diamond drilling machine DD200 having 1:1 & 1:3 gearing ratio

for core cutting using HILTI machine in RCC beams/ Walls/ Columns etc. for

laying pipes., control panel indicator to display proper pressure application,

capable of drilling at angle from 0degree- 45degree and do overhead

application. The rate shall also include for providing scaffolding, labour and

approved tools & machineries.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing and wet drilling accurate and clean holes of 37-300 mm range

without vibration through Hilti P-U ABRASIVE CORE BIT and Rig-based drilling

system using diamond drilling machine DD200 having 1:1 & 1:3 gearing ratio

for core cutting using HILTI machine in RCC beams/ Walls/ Columns etc. for

laying pipes., control panel indicator to display proper pressure application,

capable of drilling at angle from 0degree- 45degree and do overhead

application. The rate shall also include for providing scaffolding, labour and

approved tools & machineries.

Providing and wet drilling accurate and clean holes of 37-300 mm range

without vibration through Hilti P-U ABRASIVE CORE BIT and Rig-based drilling

system using diamond drilling machine DD200 having 1:1 & 1:3 gearing ratio

for core cutting using HILTI machine in RCC beams/ Walls/ Columns etc. for

laying pipes., control panel indicator to display proper pressure application,

capable of drilling at angle from 0degree- 45degree and do overhead

application. The rate shall also include for providing scaffolding, labour and

approved tools & machineries.

Providing and wet drilling accurate and clean holes of 37-300 mm range

without vibration through Hilti P-U ABRASIVE CORE BIT and Rig-based drilling

system using diamond drilling machine DD200 having 1:1 & 1:3 gearing ratio

for core cutting using HILTI machine in RCC beams/ Walls/ Columns etc. for

laying pipes., control panel indicator to display proper pressure application,

capable of drilling at angle from 0degree- 45degree and do overhead

application. The rate shall also include for providing scaffolding, labour and

approved tools & machineries.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing and wet drilling accurate and clean holes of 37-300 mm range

without vibration through Hilti P-U ABRASIVE CORE BIT and Rig-based drilling

system using diamond drilling machine DD200 having 1:1 & 1:3 gearing ratio

for core cutting using HILTI machine in RCC beams/ Walls/ Columns etc. for

laying pipes., control panel indicator to display proper pressure application,

capable of drilling at angle from 0degree- 45degree and do overhead

application. The rate shall also include for providing scaffolding, labour and

approved tools & machineries.

Providing and wet drilling accurate and clean holes of 37-300 mm range

without vibration through Hilti P-U ABRASIVE CORE BIT and Rig-based drilling

system using diamond drilling machine DD200 having 1:1 & 1:3 gearing ratio

for core cutting using HILTI machine in RCC beams/ Walls/ Columns etc. for

laying pipes., control panel indicator to display proper pressure application,

capable of drilling at angle from 0degree- 45degree and do overhead

application. The rate shall also include for providing scaffolding, labour and

approved tools & machineries.

Providing and wet drilling accurate and clean holes of 37-300 mm range

without vibration through Hilti P-U ABRASIVE CORE BIT and Rig-based drilling

system using diamond drilling machine DD200 having 1:1 & 1:3 gearing ratio

for core cutting using HILTI machine in RCC beams/ Walls/ Columns etc. for

laying pipes., control panel indicator to display proper pressure application,

capable of drilling at angle from 0degree- 45degree and do overhead

application. The rate shall also include for providing scaffolding, labour and

approved tools & machineries.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing and wet drilling accurate and clean holes of 37-300 mm range

without vibration through Hilti P-U ABRASIVE CORE BIT and Rig-based drilling

system using diamond drilling machine DD200 having 1:1 & 1:3 gearing ratio

for core cutting using HILTI machine in RCC beams/ Walls/ Columns etc. for

laying pipes., control panel indicator to display proper pressure application,

capable of drilling at angle from 0degree- 45degree and do overhead

application. The rate shall also include for providing scaffolding, labour and

approved tools & machineries.

Supply, Installation, Testing and Commissioning of the following sizes grooved

fitted M.S. Pipes of Class C (Heavy class) ISI marked including accessories such

as MS bracket, U clamps with Anchor fasteners, grooved tees / grooved elbows

/ grooved reducers / grooved couplings / grooved unions / grooved bends /

flanges / gaskets / Nut bolts etc., and laying on the surface including painting

132 20.00 4358.93 #NAME? Metre

with one coat of anticorrosive primer and two coats of approved red enamel

paint after laying and testing after Installation etc. as per specifications

complete as required.

Supply, Installation, Testing and Commissioning of the following sizes grooved

fitted M.S. Pipes of Class C (Heavy class) ISI marked including accessories such

as MS bracket, U clamps with Anchor fasteners, grooved tees / grooved elbows

/ grooved reducers / grooved couplings / grooved unions / grooved bends /

flanges / gaskets / Nut bolts etc., and laying on the surface including painting

133 40.00 2851.69 #NAME? Metre

with one coat of anticorrosive primer and two coats of approved red enamel

paint after laying and testing after Installation etc. as per specifications

complete as required.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supply, Installation, Testing and Commissioning of the following sizes grooved

fitted M.S. Pipes of Class C (Heavy class) ISI marked including accessories such

as MS bracket, U clamps with Anchor fasteners, grooved tees / grooved elbows

/ grooved reducers / grooved couplings / grooved unions / grooved bends /

flanges / gaskets / Nut bolts etc., and laying on the surface including painting

134 20.00 2038.63 #NAME? Metre

with one coat of anticorrosive primer and two coats of approved red enamel

paint after laying and testing after Installation etc. as per specifications

complete as required.

Supply, Installation, Testing and Commissioning of the following sizes grooved

fitted M.S. Pipes of Class C (Heavy class) ISI marked including accessories such

as MS bracket, U clamps with Anchor fasteners, grooved tees / grooved elbows

/ grooved reducers / grooved couplings / grooved unions / grooved bends /

flanges / gaskets / Nut bolts etc., and laying on the surface including painting

135 32.00 1504.04 #NAME? Metre

with one coat of anticorrosive primer and two coats of approved red enamel

paint after laying and testing after Installation etc. as per specifications

complete as required.

Supply, Installation, Testing and Commissioning of the following sizes grooved

fitted M.S. Pipes of Class C (Heavy class) ISI marked including accessories such

as MS bracket, U clamps with Anchor fasteners, grooved tees / grooved elbows

/ grooved reducers / grooved couplings / grooved unions / grooved bends /

flanges / gaskets / Nut bolts etc., and laying on the surface including painting

136 30.00 1287.81 #NAME? Metre

with one coat of anticorrosive primer and two coats of approved red enamel

paint after laying and testing after Installation etc. as per specifications

complete as required.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supply, Installation, Testing and Commissioning of the following sizes grooved

fitted M.S. Pipes of Class C (Heavy class) ISI marked including accessories such

as MS bracket, U clamps with Anchor fasteners, grooved tees / grooved elbows

/ grooved reducers / grooved couplings / grooved unions / grooved bends /

flanges / gaskets / Nut bolts etc., and laying on the surface including painting

137 30.00 1022.11 #NAME? Metre

with one coat of anticorrosive primer and two coats of approved red enamel

paint after laying and testing after Installation etc. as per specifications

complete as required.

Supply, Installation, Testing and Commissioning of the following sizes grooved

fitted M.S. Pipes of Class C (Heavy class) ISI marked including accessories such

as MS bracket, U clamps with Anchor fasteners, grooved tees / grooved elbows

/ grooved reducers / grooved couplings / grooved unions / grooved bends /

flanges / gaskets / Nut bolts etc., and laying on the surface including painting

138 30.00 825.03 #NAME? Metre

with one coat of anticorrosive primer and two coats of approved red enamel

paint after laying and testing after Installation etc. as per specifications

complete as required.

Supply, Installation, Testing and Commissioning of the following sizes grooved

fitted M.S. Pipes of Class C (Heavy class) ISI marked including accessories such

as MS bracket, U clamps with Anchor fasteners, grooved tees / grooved elbows

/ grooved reducers / grooved couplings / grooved unions / grooved bends /

flanges / gaskets / Nut bolts etc., and laying on the surface including painting

139 30.00 679.01 #NAME? Metre

with one coat of anticorrosive primer and two coats of approved red enamel

paint after laying and testing after Installation etc. as per specifications

complete as required.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supply, Installation, Testing and Commissioning of the following sizes grooved

fitted M.S. Pipes of Class C (Heavy class) ISI marked including accessories such

as MS bracket, U clamps with Anchor fasteners, grooved tees / grooved elbows

/ grooved reducers / grooved couplings / grooved unions / grooved bends /

flanges / gaskets / Nut bolts etc., and laying on the surface including painting

140 72.00 593.64 #NAME? Metre

with one coat of anticorrosive primer and two coats of approved red enamel

paint after laying and testing after Installation etc. as per specifications

complete as required.

Supply, Installation, Testing and commissioning of stainless steel Y Strainer

fabricated out of 1.6 mm thick stainless steel strainer ,Grade 304 ,sheet with

141 2.00 mm dia. Holes with stainless steel flange. 8891.80 #NAME? No.

Supply, installation, testing and commissioning of Butterfly valve (With tampar

Switch) with CI body SS disc nitrile sheet & O - ring & PN 16 pressure rating as

142 1.00 specified. 18386.04 #NAME? No.

Supply, installation, testing and commissioning of Butterfly valve (With tampar

Switch) with CI body SS disc nitrile sheet & O - ring & PN 16 pressure rating as

143 1.00 specified. 13212.42 #NAME? No.

Supply, installation, testing and commissioning of Butterfly valve (With tampar

Switch) with CI body SS disc nitrile sheet & O - ring & PN 16 pressure rating as

144 1.00 specified. 12682.57 #NAME? No.

Supplying, fixing, testing & commissioning of double flanged sluice valve of

rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked

complete with nuts, bolts, washers, gaskets and conforming to IS 780 of

following sizes as required :

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supply, Installation, Testing and Commissioning of Non Return Valve with dual

plate of CI body SS plates vulcanized NBR seal flanged end & PN 16 pressure

146 1.00 rating as specified. 8816.80 #NAME? No.

Supply, Installation, Testing and Commissioning of Non Return Valve with dual

plate of CI body SS plates vulcanized NBR seal flanged end & PN 16 pressure

147 1.00 rating as specified. 6136.65 #NAME? No.

Inspectors test assembly

Providing and fixing inspectors test assembly complete with alarm valve, test

148 1.00 valve, sight glass sectional drain valve, union with corrosion resistant orifice all 6635.09 #NAME? No.

complete strictly as per drawing and standard.

Installation control valve assembly

Supply, installation, testing and commissioning of UL/FM Approved installation

control valve assembly with vertical wet alarm valve with hydraulic alarm

motor gong , 2 nos pressure gauges,test valves 50 mm drain valves with all

necessary accessories.

Supply, Installation, Testing and Commissioning of Air vessel, size of 250 mm

dia., 8 mm thick M.S sheet, 1200 mm in height with Air release valve on top

and flanged connection to down comer, drain arrangement with 25 mm dia.

valve, pressure gauge with required accessories and painting with synthetic

enamel paint of approved shade as required.

The vessel shall be suitable for working pressure 8 kg/cm², Hydro test at

Supplying and fixing single headed internal hydrant valve with instantaneous

Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI

marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel

cap and chain as required

Single headed Gunmetal

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supply, Installation, Testing and Commissioning of Fire Hose Cabinet of size

750mmx600mx250mm fabricated from 16 swg thick MS sheet with 6mm thick

glazed hinged type centre opening doors having locking arrangement suitable

152 1.00 for accommodating 2 nos RRL hose pipes, 1 no. nozzle, branch pipe & painting 5242.30 #NAME? No.

with two coats of anti-corrosive primer and two coats of approved red enamel

paint etc. complete as required.

Supply, installation, testing and commissioning 63 mm dia, 2x15 Meters. long

RRL Hose Pipe with 63 mm dia male & female gun metal couplings duly binded

153 1.00 with GI wire, rivets etc. conforming to IS 636 (type-A - RRL) as required. 4150.68 #NAME? No.

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal

internal diameter size nozzle conforming to IS 903 suitable for instantaneous

154 1.00 connection to interconnect hose pipe coupling as required : 1927.73 #NAME? No.

Supply, installation, testing and commissioning of First- Aid Hose Reel

equipment with M.S. construction spray painted in post office red, conforming

to IS:884 with up to date amendments, complete with the following as

(a) 20 mm nominal internal Dia.water hose thermoplastic

155 1.00 (Textile reinforced) Type-2 as per IS:12585. 10014.83 #NAME? No.

(b) 20 mm nominal internal dia gun metal globe valve & nozzle

(c) Drum and swinging type fixing brackets on the wall.

(d) Connections from riser with 25 mm dia. Gun metal ball valve.

Providing and fixing standard fireman Axe with heavy duty insulated rubber

156 1.00 handle as per IS: 926 with clamps. 2781.04 #NAME? No.

Providing and fixing C.I. double acting air valve of approved quality with bolts,

nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will

157 1.00 be paid separately) : 5580.19 #NAME? No.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing, installation, testing & commissioning of adjustable rosette plate for

158 5.00 15mm dia in white finish UL Listed or FM approved complete as required. 179.53 #NAME? No.

Providing & fixing flow switch in following sizes M.S. pipe including connection

etc as required.

Providing, fixing, testing & commissioning of installation control valve of cast

iron body, brass/bronze working parts comprising of water motor alarm,

bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell

to sound continuous alarm when the wet riser/sprinkler system activates,

pressure gauges, emergency releases, strainer, pressure switch, cock valve

complete with drain valve and bypass, test control box, ball valves, MS pipe of

required size, flanges, orifice plate, gasket etc of follwing sizes as required.

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade

304) with orifice of required size to be fitted between flange & landing valve of

161 1.00 external and internal hydrants to reduce pressure at the outlet to the level of 1054.03 #NAME? No.

3.5 kg/cm2 complete as required.

Supply, Installation, Testing and Commissioning of 100 mm dia Pressure Gauge

of range 0 - 15 Kg / cm² conforming to IS - 3624 having bourdon tube of

stainless steel 316 in cast aluminium, stove enameled, black, weather proof

162 1.00 case with outer, screwed aluminium bezel and complete with necessary U-type 2109.18 #NAME? No.

stainless steel siphon tube and cock including providing suitably painted angle

iron support to the tube etc.as per specification complete as required.

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following

capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut &

163 2.00 bolts grouted in wall complete. 6377.14 #NAME? No.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supplying & erecting ABC powder type 'Ceasefire' type Fire extinguisher as per

IS 13849 or 1 Kg capacity with necessary clamp for erection on wall

Supplying & erecting D.C.P. type fire extinguisher for following capacity

cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and

brackets confirming to IS 2171 1985 and complete erected with necessary

165 2.00 clamps made from 50 x 6 mm M S Flat with nuts and bolts grouted in wall 1656.40 #NAME? No.

[A] For 5 Kg Capacity

Supplying, installing, testing and commissioning of GI sheet of 16gauge

thickness Fire bucket with clean sand & stand in accordance with IS 2546. Fire

bucket shall have two coats of anti corrosive paint, two coats of fire red paint

on its outside & two coats of white paint on the inside. The word "FIRE" shall

be clearly stencilled on it in accordance with IS 2546. Vendor to include in his

quote all costs relating to mounting of the bucket at locations stated by the

Fire NOC & the Architect/EIC. Vendor to include in his quote all costs all

accessories, consumables, fittings & rigging equipments necessary for the

satisfactory installation of the same.(9 litres)

Supplying And Placing Of Ward Care Bed Delux (Plain Bed) (I.C. 7500)

(1900Mml X 91Ommw X 61Ommh .) Providing & Supplying A Ward Care Bed

Frame Work Of Specially Designed Crc Rectangular Heavy Tube. Machine

Pressed Crc Sheet Top With Proper Support. Ss Head & Foot Bows With

167 5.00 Laminated Panels. Four Side Saline Arrangement Location L.Eg Fitted With 10189.00 #NAME? No.

Shoes. Pretreated & Powder Coated. Selection As Per Engineer-In-Charge Etc.

Completed. ( As Per Photo Attached)APPROVED MAKE : GODREJ , HERMAN

MILLER, STEELCASE, KNOLL,HOF

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supplying And Placing Of Hospital Plain Bed Mattress 100Mm Thick

Polyurethane Foam Cushions Confirming To En 45545 Hl3Density Kg/M³ 65 ±

10 En Iso 845 Tensile Strength Kpa > 35 Iso 1798 Elongation At Break % ≥ 45 Iso

1798 Comfort Factor On 50Mm Thickness - > 1 Is:7888 Ci.6 Hardness Index

@25% @40% N/Cm² > 0.4 > 0.8 Is:7888 Ci.6 Compression Set (50%, 70°C, 22H)

% ≤ 10 Iso 1856 Compression Kpa 7-11 En Iso 3386 Humidity Ageing (%)

168 5.00 Hardness Loss % ≤ 20 Iso 2440 Dynamic Fatigue Test Loss Of Thickness Loss Of 4499.00 #NAME? No.

Force Deflection % ≤ 5 ≤ 10 Din En Iso 3385 Tear Strength Kg/Cm > 0.05 Iso

8067 Resilience (%) Minimum % > 40 Iso 8307 Fire Property (Without Fire

Barrier Cloth)• Heat Release Rate Iso 5660-1• Smoke Density Iso 5659-2•

Toxicity Iso 5659-2 En 45545-2, R21 (Hl3)

APPROVED MAKE : GODREJ , HERMAN MILLER, STEELCASE, KNOLL,HOF

Supplying And Placing Of Ms Saline Stand On Castor Base Mild Steel Tubular

Frame Mounted On Four-Pronged Mild Steel Base Frame Fitted With 50Mm

Dia. Non-Rusting Castor Wheels. Stainless Steel Iv Rod With Two Ring Type

Hooks. Height Adjustable From Approximate 1600Mm To 2380Mm Using Twist

Type Threaded Knob. Finish: 7 Tank Pre-Treated And Epoxy Powder Coated

Upto 70 Micron And Oven Backed For Superior Finish.APPROVED MAKE :

GODREJ , HERMAN MILLER, STEELCASE, KNOLL,HOF

Supplying And Placing Of Bedside Locker – Deluxe Overall Approximate

Size:400Mm L X 400Mm W X 820Mm H Cnc Machine Pressed & Double Bent

Crca Sheet Cabinet. Cnc Machine Pressed & Double Bent Ss Top With Three

Side Guard Rails.Drawer Fitted With Heavy Duty Easy Slide Ball Bearing

Channels. Door & Drawer Front With Recessed Handle. Door With Air-

170 5.00 Ventilation Louvers. 50Mm Dia. Non-Rusting Castor Wheels. Finish: 7 Tank Pre- 7750.00 #NAME? No.

Treated And Epoxy Powder Coated Upto 70 Micron And Oven Backed For

Superior Finish .APPROVED MAKE : GODREJ , HERMAN MILLER, STEELCASE,

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supplying And Placing Instrument Trolley Without Bowl & Bucket With Overall

Dimension: 775Mm X 531Mm X 915Mm H. Ss 304 Sheet Is Provided At Top For

The Placement Of The Instruments Being Used & Also For Easy In Portability. Ss

304 Sheet Is Provided At The Top As Well As Bottom Shelf For Keeping The

Instrument Being Used. Horizontal Bars Is Welded With Legs So As To Provide

Protection At Sides With Supporting Legs Giving A Sturdy Look. Castors Of

125Mm Dia. Are To Be Used For Easy In Movement. Maximum Safe Working

Load Is Approxx 40Kg.APPROVED MAKE : GODREJ , HERMAN MILLER,

STEELCASE, KNOLL,HOF

Supplying And Placing Instrument Trolley With Bowl & Bucket With Overall

Dimension: 1050Mm X 531Mm X 915Mm H. Ss 304 Sheet Is Provided At Top

For The Placement Of The Instruments Being Used & Also For Easy In

Portability. Ss 304 Sheet Is Provided At The Top As Well As Bottom Shelf For

172 1.00 Keeping The Instrument Being Used. Horizontal Bars Is Welded With Legs So As 10389.00 #NAME? No.

To Provide Protection At Sides With Supporting Legs Giving A Sturdy Look.

Castors Of 125Mm Dia. Are To Be Used For Easy In Movement. Maximum Safe

Working Load Is Approxx 40Kg.

Supplying And Placing Of Modular Medicine Trolley Overall Approximate Size:

672Mm L X 390Mm W X 915Mm H Crca Square Frame Work, Mounted On

100Mm Dia. Synthetic Castor Wheels.Cnc Machine Pressed & Double Bent

Stainless Steel Top Shelf With Four Side Raised Edges. Cnc Machine Pressed &

173 5.00 Double Bent Ss Tray At Bottom. High Impact Polystyrene Modular Cabinet With 11500.00 #NAME? No.

Six Drawers.Finish: 7 Tank Pre-Treated And Epoxy Powder Coated Upto

Micron And Oven Backed For Superior Finish.

APPROVED MAKE : GODREJ , HERMAN MILLER, STEELCASE, KNOLL,HOF

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supplying And Placing Crash Cart With Overall Dimension Of L 1048 W 475 H

1555 Mm . Ss 304 Grade Made Top Sheet With 1Mm Thickness Is Used. Middle

& Bottom Sheet Is Made Of Ss 304 Grade With Thickness 1Mm. Ss 304 Grade

Frame Bar With Section Of 25.4, 19, 1.2 & 16Mm Is Used. Ms Plated Cylinder

Case Is Used Welded With Cylinder Holding Unit To Hook Giving The Curve

Bend At The Bottom To Hold The Cylinder.

50Mm Dia Castors Should Be Used To Mount The Cylinder Case. Ss 304 Grade

Pipe Of Section 12Mm Is Used To Provide Provision To Mount Iv Rod. High

174 2.00 Endurance Anti Static, Plastic Injected Molded 4 Swivel Castors Of Dia 125Mm 22899.00 #NAME? No.

Is Used & Has Provision For Diagonal Locking. Ss 304 Handle Pipe Has Section

Of 25.4Mm With Length Of 365Mm Having Thickness Of 1.2Mm Giving A Glossy

Finish. Ss 304 Tubular Frame Has Five Different Colored Removable Bins

Mounted On Top Shelf And Two Polystyrene Lockable Storage Units With Three

Drawers Each. Thermosetting Epoxy Polyester With Semi Gloss Finish Powder

Coating Is Done. Safe Working Load Is Approx 40Kgs.APPROVED MAKE :

GODREJ , HERMAN MILLER, STEELCASE, KNOLL,HOF

Supplying And Placing Of Stool With Overall Dimension:Diagonal Leg Dia

Mm H470 Min-655Max. Top Plate:Ss 304 Made Sheet With Spin Section Of

Thickness 1Mm & Should Be Non Corrosive. It Should Have A Diameter Of

305Mm, Seat Base:Seat Base Is Made Of Ms Ring And Rectangular Tube.

Screw:En8 Screw Having Dia Of 22 Mm Should Be Used For Height Adjustment

Of The Seat Base. Round Hub:The Hub Should Be Made Of Ms Erw Tube Having

Dia Of 38Mm And Thickness 2 Mm. The Hub Should Be Welded With The Legs

175 10.00 And It Should Accommodate And Cover The Lead Screw Mechanism. Leg 2750.00 #NAME? No.

Powder Coating:All Metal Components Should Be Pre Treated With Zinc

Phosphating In 9 Tank Process And Then Powder Coated With Anti Microbial

Epoxy Polyester Powder Coating . All Welding Should Be Co2 Argon Welding To

Minimize Rusting On The Welding Areas.Working Load:Safe Working Load

Must Be 135Kg.APPROVED MAKE : GODREJ , HERMAN MILLER, STEELCASE,

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supplying And Placing Of S.S 304 Laboratory Stool For Hospital Used Psp-1037-

Ss Stool 14" Square Stainless Steel 18 Gauge Contoured Seat Stainless Steel

Base With Heel Rest For Added Comfort Tubular Legs Fitted With Rubber

176 10.00 Shoes Pretreated And Power Coated. As Directed By Engineer In Charge Etc 2900.00 #NAME? No.

Complete.APPROVED MAKE : GODREJ , HERMAN MILLER, STEELCASE,

Supplying And Placing Of Stretcher With Overall

Dimensions:2005Mm(L)X666Mm(W)X827Mm(H): Trolley:The Trolley Should Be

Made Of 31.75 And 25.4 Mm Dia 1.6 Mm Thick Erw Tube. Holder For

Stretcher:Hollder For Stretcher Should Be Made Up Of Mild Steel. Castor

Wheel:Castor Should Be Of 200 Mm Dia , Diagonal Locking Castor.

Stretcher:Stretcher Should Be Made Up Of Erw Tube Of Dia 25.4 Mm And

Thickness 1.6 Mm. Stretcher Top Sheet:Top Sheet Should Be Made Of Crca

Sheetof Thickness 1.2 Mm With Contour Shape To Accommodate Patient.

Provision For Iv Pole Holder Should Be There. Maximum Patient

177 1.00 Load:Maximum Safe Work Load Should Be 135 Kg. Welding:To Ensure Qood 8500.00 #NAME? No.

Quality Welding " Co2 Argon" Process Should Be Adhered To. Powder

Coating:All Metal Components Should Be Pre Treated With Zinc Phosphating In

9 Tank Process And Then Powder Coated With Anti Microbial Epoxy Polyester

Powder Coating. Packing:Goods Should Be Supplied In Knocked Down

Construction To Reduce Carbon Emission. In House Test Treport Proof:Loading

Test , Cycle Tests , Impact Test, Salt Spray Test, Castor Break Test,

Certifications:The Manufacturer Should Compliant With Iso 9001,

13485, Ohsas 1800 And Ce Certification.APPROVED MAKE : GODREJ , HERMAN

MILLER, STEELCASE, KNOLL,HOF

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supplying And Placing Of Folding Wheel Chair With Overall Dimension: (L)

X (W) 600 X (H) 870Mm Frame Structure Foldable Frame Structure Is Made Of

Section 22X1.2Mm A3 Carbon Steel With Chrome Finish. Cross Bar Are Made

Of A3 Carbon Steel With Section 25.4 X 1.2Mm. Rear Wheel 24 Inch Solid Mag

Wheels With Alloy In The Rim Hand Rim Integrated Hand Rim Provide To Drive

The Wheel Chair Of Section 16X1.2Mm A3 Carbon Steel With Chrome Finish

Front Wheel 8 Inch Hub Made Of Pa Polymer And Outer With Solid Rubber Arm

Rest Pu Molded Arm Rest & Base Is Made Of Abs For Better Arm Support Calf

178 2.00 Rest & Seat Leatherette Strap For Calf Rest & Leatherette Cushion For Seat 4500.00 #NAME? No.

Footrest Adjustable Alluminimum Die Cast Foot Rest With Updown & Swivel

Type Mechanism Push Handle Handles Are Made Of Moulded Rubber Grip To

Push The Wheelchair Brakes Hand Brakes Are Provided To Lock The Wheelchair

At Desired Location. Foot Press Extended Base With Molded Plastic For Better

Grip Finish Anti Rust Chrome Finish Safe Working Load 100Kg.APPROVED MAKE

: GODREJ , HERMAN MILLER, STEELCASE, KNOLL,HOF

Supplying And Placing Of Three Fold Partition Screen. It Should Be Portable

Screen On Castors Having Three Screens Which Is Used To Provide Privacy In

Recovery Ward 2637L Mm X 640W Mm X 1720H Mm Fixed Frame Made Up Of

Erw Tube With Section Dia Of 25.4 Mm With 1.2 Mm Thickness Which Is Used

To Provide Hinging To Movable Frame Movable Frame Made Up Of Erw Tube

179 3.00 With Dia Of 19.05 Mm With 1.2 Mm Thickness. Flexible Frame Has Plastic 4500.00 #NAME? No.

Hinge. It Can Be Adjusted In Provided Space. Leg Frame Made Up Of Erw Tube

With Square Section Of 30 Mm With 1.6 Mm Thickness. Castors Wheels Of Dia

50 Mm Are Provided For Ease Of Movement. Casement Fabric For Screen

Which Is Opaque For Providing Modesty.APPROVED MAKE : GODREJ , HERMAN

MILLER, STEELCASE, KNOLL,HOF

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supplying And Placing Of Oxygen Cylinder Trolley Mounted In Castors With

Over All Sizes (L)410Mm X (W)375Mm X (H)1112Mm. Main Frame For Holding

The Cylinder Consists Of M.S Erw Tube Having Section Dia 25.4Mm And

Thickness 1.6 Mm. Locking Rod For Cylinder Positioning Consists M.S Rod Of

Dia 10Mm. Base Frame For Giving Sturdy Base For The Resting Of Cylinder

180 5.00 Consists Of M.S Erw Tube Having Section Dia 25.4 X 25.4 Mm And Thickness 1550.00 #NAME? No.

1.6Mm. Castor Wheel Made Of Pu Having Dia 100 Mm And Thickness 25Mm.

Leg Cap Made Of Ldpe. Metal Fabrication In Ral White, Epoxy Polyester Powder

Coating Plastic Parts In Pantone Cool Grey 8C.APPROVED MAKE : GODREJ

HERMAN MILLER, STEELCASE, KNOLL,HOF

Supplying And Placing Of Doctor/Surgeon Stool Overall Approximate Size:

560Mm Dia. X 495Mm To 635Mm H Five Pronged Ms Structure Mounted On

50Mm Dia. Non-Rusting Castor Wheels. Height Adjustment Using Gas Lift

Mechanism Attached With Hand Lever.

181 2.00 Height Adjustable Back Support With Knob. Cushioned Seat (375Mm Dia.) And 2500.00 #NAME? No.

Back Support. Finish: 7 Tank Pre-Treated And Epoxy Powder Coated Upto

Micron And Oven Backed For Superior Finish

APPROVED MAKE : GODREJ , HERMAN MILLER, STEELCASE, KNOLL,HOF

Supplying And Placing Of Biomedical Waste Trolley Of 60 Liter Capacity Of Best

Plastic & Approved Brand & Selected Colour Etc.(As Per Photograph) (Set Of

Bucket).APPROVED MAKE : Soclean , ARVS or Equivalent

Supplying And Placing Of Dust Bin (As Per Photographs) Of 240 Liter

183 1.00 Capacity.APPROVED MAKE : Supreme,Soclean , ARVS or Equivalent 2550.00 #NAME? No.

Supplying And Placing Of Dust Bin (As Per Photographs) Of 100 Liter

184 1.00 Capacity.APPROVED MAKE : Supreme,Soclean , ARVS or Equivalent 2250.00 #NAME? No.

Supplying And Placing Of of Dust bin (As per photographs)of 5 Liter

185 18.00 Capacity.APPROVED MAKE : Supreme,Soclean , ARVS or Equivalent 1300.00 #NAME? No.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supply & Installation of Cubicle/ Privacy Curtains for Hospital Track Material

Made of Aluminium alloy (6063-T6), with corrosion resistanceproperties and

Standard white powder coatingTrack Size (Approximate)Gauge 1.7mm Height

25mm Width 20mm Runner type Wheel or Glider Type Runner material Made

of Nylon of PVC Hooks Stainless Steel 202 or more Bends Tracks are bendable

to a radium of 300 mm at 90 degree to cover the whole bed Track height As per

site requirement

Track roof suspenders Made of aluminium pipe of at least 12 mm diameter and

Circular Plate made of aluminium with at least 50 mm diameter.These should

be white powder Coated and fixed with the ceiling is with anchors, bolts,

screws etc.Track wall supports Aluminium white Powder coated Tack bridge

186 15.00 clamp Aluminium white Powder coated Curtain Removal Point Optional : 1200.00 #NAME? sqm

Curtain runner removal point for loading and unloading of

runners Curtain Material Polyester Blended Standard Curtain Size Height At

least 84 inch or more

Width At least 46 inch or more Mesh(Net) Size At least 18 inch or more from

top of the curtain and made of nylon Curtains Type:Stain Retardant Cubicle

Curtains These Curtains should be made up of fabrics with inherent

antibacterial and flame retardant properties.These curtains should be wrinkle

free and shrink proof with Anti odour and Anti-fungal properties.It should meet

the international Antimicrobial Test JISL 1902/ISO20743These Curtains should

have stain retardant qualities with water repellent quality with rust proof SS

grommets 6" on centers. Designs and Colours should be approved by the user

department.APPROVED MAKE : Rd plast,fast track,fabrica

Supply & Installation Roller Blinds with Alluminium alloys headrail shall be

m.m. with control unit, shall be made of high grade Polymer and shall not used

in side the head rail which shall transfer mation from chain. Chain shall be

made plastic beads for operation. Use black out fabric with no openess factor

and bottom pipe should be cover by both side round endcap. Type of Fabrics

Blackout Composition of Fab. 100 % Polyster Blackout Rate 100% Weight

g/m2 (+-5 % )Fabric Thickness 0.45 MM (+-0.05) Light Fastness 4 Grade

Available Width 2.20 Mtr.Hanging Propeties ExcellentTearing Strenght Very

High Coating Acryilc coating resistant to Cracking & Fraying Cleaning

Conditionally cleanable with damp cloth.APPROVED MAKE :

fabric,vista,marvel,mac

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supplying And Placing FLIP CHART STAND - Size (600 mm x 1200 mm)

Providing and installing in position approved brand magnetic matt finish resin

coated ceramic white board with G.I. sheet backing filled with honey combing

188 1.00 material and arrangement for Flip chart and arrangement for fixing on 3900.00 #NAME? No.

wall.APPROVED MAKE : alkosign , Title, asian or Eq.

Supplying And Placing WHITE BOARD (2400mm X 1200mm)(Display board for

writing / projections) Providing and installing magnetic matt finish resin coated

ceramic white board of approved make with G.I. Sheet backing filled with

189 1.00 honey combing material and proper arrangement for hanging an wall with full 25999.00 #NAME? No.

length tray at bottom for duster and maker person.Hooks to be provided on

top for hanging.APPROVED MAKE : alkosign , Title, asian or Eq.

Supplying And Placing Notice board having 9mm soft board as a core materail

1mm laminate sheet as back materail and surface of 1.mm felt cloths, having

profile of heavy alumnuim fluted anodized profile 10 to 12 micron of 18 to

thick board C channel and corner is made uo of molded virgin ABS grey colour

hanging vertical and horizontal hanginh facilty as per selected colour & size

190 1.00 including all necesaary fixture , faster, fitting, labour material machinary etc 5500.00 #NAME? No.

complete as selected and directed by engineer insharge. Approved make:

scholar/pearl/alkonsign/elora -Notice Board size 900mm x 1200mm Overall

size:1200x900.APPROVED MAKE : alkosign , Title, asian, scholar,pearl,elora

Supplying And Placing Alkosign Make : Key Cabinet 40 keys Providing & fixing

Steel Back key cabinet for 40 keys having overall size of 520mm (W) x 50mm

(D) of 500mm (H) of 13mm Anodised aluminum single & double frames. Back

steel sheet is grey colour powder coated with 40 nos punched holes for key

chain with steel wire rings numbered 1 to 40 having corners of ABS in grey

191 1.00 colour. Cabinet should with 1 no of lock with 2 nos of keys & top cover in 3 mm 8500.00 #NAME? No.

thick acrylic sheet including all neceassary fixture, faster, fittings, labours

material machniary etc complete as selected and directed by engineer incharge

Key Cabinet : size : 520mm x 500 mm.APPROVED MAKE : alkosign , Title, asian,

scholar,pearl,elora

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supplying and Placing Slotted shoe Rack : 900 W X 300 D X750 H mm. To be

provided with 4 Shelves with SS 304 grade supporting legs, horizontal bar is

192 2.00 made of SS 304 pipe having dia 31.8, 25 mm respectively.APPROVED MAKE : 9500.00 #NAME? No.

alkosign , Title, asian, scholar,pearl,elora

Supplying And Fixing Acrylic Name Board : 12" X 5" Providing and fixing sign

board made of acrylic sheet and fixing on door wall in first or second alphabet

193 20.00 as instructed in radium material .Including all materials and labour 1525.00 #NAME? No.

etc.complete as per detail drawing and instruction of engineer-in charge.

Supplying And Fixing Photo with Frame, Size : 600 X 400 Providing and Fixing

Photo Frame made of Teakwood Border Patti of size 25x25 with melamine

polish finish with 3 mm glass and inside the picture on Photo paper with high

194 3.00 resolution picture quality and sticked on MDF as selected by engineer-in-charge 4520.00 #NAME? No.

including all necessary fixture, fasteners,labour , material etc comp.

Supplying And Fixing Oreva Make : Wall Clock Provinding and fixing Oreva

make wall clock of the desired shape and design as selected by engineer in

charge Oreva Wall Clock-AQ 5527 or Eq.

Supplying And placing fabricated trolly of size 36” x 18” x 34” ht. with goods

carriage capacity of 250kg. made up from 40 mmx 40 mm 16 guage M.S. pipe

with 16G sheet having 1" 16 uage CRC ROUND PIPE and whole unit is covered

with MS round bar mesh including epoxy polymer powder coating 50 micron

196 1.00 thick with 100 mm nylon castor at bottom for smooth movement including all 11500.00 #NAME? No.

fixtures , fasteners , labour , material etc comp. as seletced and diretced by

Engineer Incharge.APPROVED MAKE : GODREJ , HERMAN MILLER, STEELCASE,

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supplying and fixing Reception/Nursing Table - 3600x750x1050mm made of

Top made of 25 mm thick MDF with 1mm and inside side 0.8 mm approved

laminate with 2mm thick PVC edge bidding finish and Side made of 18 mm

thick MDF with with exterior side 1 mm and interior side 0.8 mm approved

laminate with2mm thick PVC edge bidding finish. 18 mm thick MDF for

Modesty Panel with exterior side 1 mm and interior side 0.8 mm approved

laminate. MDU - 3 drawer made of 18 mm thick MDF with with exterior side

mm and interior side 0.8 mm approved laminate with 0.8mm PVC edge bidding

finish. Drawer run on Telescopic Channel with lock and handle etc. All

necessary hardware included.APPROVED MAKE : GODREJ , HERMAN MILLER,

STEELCASE, KNOLL,HOF

Providing,supplying,arranging and fixingMed. back Rev. Chair, Upholstered

with Leatherette seat made up of 12 mm +/- 1 mm thick hot pressed Mr grad

plywood and back 12mm hot pressed Mr grad plywood. Moulded polyurethane

foam used in making seat with moulded density 45+/- 2 kg/m ³. Back is made

out of moulded polyurethane foamdensity 45+/- 2 kg/m ³.Spine bracket should

be made of M.S plate 8 mm Thickness connecting back with mechanism.

Armrest top is soft touch polyurethane moulded of 250 to 300 density insert in

stainless steel pipe having unique "Y"shape. The mechanism of the chair have

have following features: 360⁰ revolving type ,seat plate CRCA 3.15 mm thick

& channel Plate - 4 mm Thick CRCA synchro Mechanism, Tilt tension

adjustment,single position locking . Plastic component inside the mechanism of

Grade - MI 3530 and Epoxy Powder coated 70 Microns with tested 1.2 lacs

198 1.00 cycles as per BIFMA Standard The chair have be provided with pneumatic 9929.00 #NAME? No

height adjustment which have have stroke of 100 +/- 5 mm The Base have be

made of tubular CRC fabricated chrome finish. It have be fitted with 5 Nos.

Twin wheel castor – 50 mm Diameter. The size of the base have be - 640 +/-

mm pitch-centre-diameter. Load test as per BIFMA compliance.The twin wheel

castors have be made of Nylon injection moulded in black colour.Overall

dimensions of Chair have be, Width of Chair - 570 mm, Depth of chair 560 mm

as measured from base below. Height of back from ground - min 1010 to max

1110 mm. Seat height -min 475 mm to max 575 mm. Dimensions tolerance /

variations have be within +/- 10 mm. APPROVED MAKE : GODREJ , HERMAN

MILLER, STEELCASE, KNOLL,HOF

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supplying And placing Office Table 1200mm W X 600mm D X 740mm H

Worktop Made from 25 mm Thick Pre-laminated Particle board. All the edges

are sealed with 2 mm thick PVC edge band all around, Side Panels Made from

25 mm Thick Pre-laminated Particle board. All the edges are sealed with 2 mm

thick PVC Edge band on the user side and 0.8 mm on the Top and Bottom Side.

The side panels have 2 glide screws each for leveling of the desk. Modesty

Panel Made from 18 mm Thick Pre-laminated Particle board. All the edges are

sealed with 0.8 mm thick PVC edge band all around Freestanding Pedestal The

199 1.00 freestanding pedestal is made from 18 mm Pre-laminated Particle board with a 16500.00 #NAME? No.

combination of 2mm and 0.8 mm PVC Edge band on all the exposed surfaces as

per requirement. The drawers are provided with suitable slides for smooth

operation. All the pedestal drawers are centrally locked with a single key. The

entire desk unit is assembled with suitable KD fittings and hardware. Each side

panel is provided with a cutout for laying cables for the monitor and other

computer accessories.APPROVED MAKE : GODREJ , HERMAN MILLER,

STEELCASE, KNOLL,HOF

Providing,supplying,arranging and fixing Side Unit with top 25mm overall

thickness made from 18 mm thick Pre-laminated Particle board.All the edges

are sealed with 2 mm thick PVC edge band all around, Side and drawer made of

18mm thick Pre-laminated Particle board finish All the edges are sealed with

mm thick PVC edge band all around, of approved shade. Drawer run on meta

box and shutter fixed with auto hinges including . all necessary fixtures and

fastening as approved and back of the unit with 6mm thick Pre-laminated

Particle board of approved shade including all materials and labour etc.

Complete as per drawing and instruction of Engineer-in charge . Low Height

Storage Size 450mm D x 750mm H.APPROVED MAKE : GODREJ , HERMAN

MILLER, STEELCASE, KNOLL,HOF

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing,supplying,arranging and fixing Full Height Storage with top 25mm

overall thickness made from 18 mm thick Pre-laminated Particle board.All the

edges are sealed with 2 mm thick PVC edge band all around, Side and shelfs

made of 18mm thick Pre-laminated Particle board finish All the edges are

sealed with 2 mm thick PVC edge band all around, of approved shade. lock with

Two keys and shutter fixed with auto hinges including . all necessary fixtures

and fastening as approved and back of the unit with 6mm thick Pre-laminated

Particle board of approved shade including all materials and labour etc.

Complete as per drawing and instruction of Engineer-in charge . Full Height

laminate Storage Size Size Size 450mm D x 2100mm H.APPROVED MAKE :

GODREJ , HERMAN MILLER, STEELCASE, KNOLL,HOF

Providing,supplying,arranging and fixingWorking Table 1800x900x750 made of

25mm thick prelam paertical board with 2mm thick pvc edge beanding

finish.Modesty pannel made of 25mm thick prelam paertical board with 0.8mm

thick pvc edge beanding finish.Under structure made of 50x50x1.6mm thick ms

crca ms sq pipe powder coated finish with nylon shoe cap.On top cable

manager for wireing supply.Padestal-400x500x650 Top made of 18mm thick

prelam paertical board with 2mm thick pvc edge banding finish.Side and front

drawers made of 18mm thick prelam paertical board with 2mm thick pvc edge

202 1.00 beanding finish.Back 6mm thick prelamed finish.Drawer run of meta box with 30699.00 #NAME? No

center locking system.50mm thick castors.Side unit - 900x450x750 Top 25mm

thick prelam paertical board with 2mm thick pvc edge beanding

finish.Side,Drawer and shutter made of 18mm thick prelam paertical board

with 2mm thick pvc edge beanding finish.Back 6mm thick prelamed

finish.Drawer run of meta box and shutter hanging on auto hingies with

lock,buffer etc all necessary hardware included.APPROVED MAKE : GODREJ

HERMAN MILLER, STEELCASE, KNOLL,HOF

Providing,supplying,arranging and fixingCenter Table - 900x600x450 Top made

of 25mm thick prelam paertical board with 2mm thick pvc edge beanding

finish.2nd Top made of 18mm thick prelam paertical board with 2mm thick pvc

203 5.00 edge beanding finish.Under Constructure made of 25x25x1.2mm thick ms crca 3990.00 #NAME? Unit

sq pipe powder coated finish with pvc shoes.APPROVED MAKE : GODREJ

HERMAN MILLER, STEELCASE, KNOLL,HOF

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Main Frame:The Chair Beam shall be on Triangular CRCA of appropriate

thickness and cross section so as to achieve the high durability as per the

standard with powder coating.Armrest & Legs:The Armrest and Legs frame

support shall be of CRCA and finished with the powder coating.Armrest and

legs specially designed aesthetically to give the high level durability.Seat & Back

204 2.00 RestiThe seat & back should be made of heavy duty perforated CRCA sheet 10599.00 #NAME? No

with insert of appropriate material and thickness to achieve high level

durability and ergonomic seating comfort.The product finishing durability,

stability and workmanship as of International Furniture Standards of

BIFMA.Size - 1745x525x882.APPROVED MAKE : GODREJ , HERMAN MILLER,

STEELCASE, KNOLL,HOF

Providing and Fixing PLU of Size: 380mm(W) x 450mm(D) x 1830mm(H)

Models: 6 Door (Main units and addon units), Stackability The add-on units can

be stacked width wise to form bank of lockers having common side panel.

Locking § 10 Lever cam lock with lock lever, Option of hasp arrangement

Material: CRCA 0.6mm Thickness Construction: Rigid knockdown

construction.Shelf Uniformly Distributed Load Capacity per each shelf level is

35 Kg maximum. Hat Shelf Only for 1 Door Model at the top Hanging Rod · For

1 Door – Below Hat Shelf For 2 Door – 1 Hanging rod in both compartment

Finish: Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10).

Handle / Label holder · Aesthetically appealing Snap fit ABS plastic handle.

Plastic label holder for identification Ventilation Attractive punched pattern for

ventilation Accessories (Optional) Stand for 1 wide, 2 wide and 3 wide –

mm High (add to unit height) inclusive of Leveler.APPROVED MAKE : GODREJ

HERMAN MILLER, STEELCASE, KNOLL,HOF

Supplying and Placing in position , Steel cupboard made from CRCA sheets

gauge with anticorrosive treatment , rigid knockdown constructions with Top

hanging sliding glass doors, Plastic roller with steel ball bearing for smooth

206 1.00 movement of doors, adjustable shelve(4 Nos ),dia cast lock for locking with die 13299.00 #NAME? No

cast handle. Size -1830(h) X 900(w) x 450(d).APPROVED MAKE : GODREJ

HERMAN MILLER, STEELCASE, KNOLL,HOF

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing,supplying,arranging and fixing cupboard of size 916W*486D*1980H

mm with 4 shelves. Material – 0.7mm thick (+/- 0.07mm) CRCA for shelf;

0.8mm thick (+/-0.08mm) high yield strength CRCA for doors & back; 0.9mm

thick (+/- 0.08mm) CRCA for all other components. It should have 3 way locking

mechanism with shooting bolt & mazak handle. It should have height wise

adjustable shelf With uniformly distributed load capacity per each full shelf

40kg maximum. Finish – Epoxy Powder Coated to the thickness of 50 microns

(+/-10).APPROVED MAKE : GODREJ , HERMAN MILLER, STEELCASE, KNOLL,HOF

P Providing,supplying,arranging and fixing Low Back Chair - Upholstered with

Leatherette seat have be made up of 12 mm +/- 1 mm thick hot pressed Mr

grad plywood on which moulded PU foam mounted .Back is made up moulded

PU foam and Inner outer snap fitted covers injection moulded rectangular

shape.Spine bracket made of ambose 6 mm Thick M S plate connecting back

with mechanism. Armrest top is hard touch polypropylene moulded in ring

shape . The mechanism of the chair have following features: 360⁰ revolving

type 2.5mm Thk CRCA seat plate with 3.5mm thk CRCA channel plate push

back Mechanism, Tilt tension adjustable, Single position locking , Plastic

component inside the mechanism of Grade - MI 3530 and Epoxy Powder

208 15.00 coated 70 Microns with tested 1.2 lacs cycles as per BIFMA Standard The chair 3829.00 #NAME? No

have be provided with pneumatic height adjustment which have have stroke of

100 +/- 5 mm The Base have be made of injection moulded nylon. It have be

fitted with 5nos. twin wheel castor - 50 mm diameter. The size of the base be

660 +/- 1 mm pitch-centre-diameter The twin wheel castors have be made of

Nylon injection moulded in black colour - 50 mm diameter Overall dimensions

of Chair have be, Width of Chair - 580 mm, Depth of chair -580 mm as

measured from base below. Height of back from ground - min 955 to max1055

mm. Seat height -min 475 mm to max 575 mm. Dimensions tolerance /

variations have be within +/- 10 mm. APPROVED MAKE : GODREJ , HERMAN

MILLER, STEELCASE, KNOLL,HOF

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing,supplying,arranging and fixingThe chair pipe structure of MS CRCA

finish 16 gauge round pipe having a diameter of 32 mm, the understructure

frame tubular structure with stability for proper balance, the seat and back is

supported on spring structure, the backrest armrest and seat dimensioned and

209 15.00 curved from an ergonomics point of view, the frame and spring-seat structure 3399.00 #NAME? No

prepared from MIG welding process & powder coated, proper high-density

rubber bush provided at all four legs, seat & back upholstered with

fabric.APPROVED MAKE : GODREJ , HERMAN MILLER, STEELCASE, KNOLL,HOF

Providing,supplying,arranging and fixing Laboratory work bench of size

600/750/900mm D X 750/900 Hmm with or without storage unit under the

worktop.One drawer and one shutter as per requirement.

Providing,supplying,arranging and fixing Lab Stool - 300 dia top soild wooden

melamine matt polished.Under structure made of 25mm round dia crc pipe

211 2.00 powder coated finish with nylon shoe cap.26"ht.APPROVED MAKE : GODREJ , 2199.00 #NAME? Nos

HERMAN MILLER, STEELCASE, KNOLL,HOF

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires, in below type of pipe to be erected complete with earth

continuity and necessary connection with primary light with accessories

212 10.00 erected on Metal / PVC / wooden box covered with 3 mm thick 167.66 #NAME? Nos

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary

Lamp holder / ceiling rose / H.D.Connector as directed. (f) with medium class

Rigid PVC pipe and accessories erected concealed in wall/ceiling complete.

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete ( Cat. III )

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected with 6A Modular type

switch and hum free EME four or more step type electronic fan regulator with

separately mounted and accessories with earth continuity of following type

214 35.00 erected on PVC / Metallic/Wooden box, single mounting base frame covered 674.68 #NAME? Nos

with textured/metallic/white front plate modules erected on / in wall / ceiling

as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (f)

with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete (Cat. III)

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length, in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories. [I] For 6A Plug and 6 a switch with

2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board (f) with medium

class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete (Cat. III)

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length, in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories. [II] For 16A Plug and 16 amp switch

with 2-2.5 sq.mm Cu. Wire from mcb db board. (f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling complete (Cat. III)

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length, in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories. [III] For 16A Plug and 16 amp switch

with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb d b

board. (f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete (Cat. III)

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic/Wooden box, single mounting base frame

218 50.00 covered with textured / metallic/white front plate modules erected on / in 257.55 #NAME? NOS

wall / ceiling with following type accessories Cat-III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires erected in below type of pipe with 6A Modular type

switches and following type of accessories erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected. with necessary

batten/angle holder or ceiling rose or H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete (Cat. III)

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per

220 52.00 site situation directed by Engineer In charge. 25.25 #NAME? NOS

(7) Blank Plate Single Cat-III

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per

221 7.00 site situation directed by Engineer In charge.(3) Two Pin/RJ-11 Telephone 210.08 #NAME? NOS

Socket [B] For Two Gang (Cat. III)

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per

222 19.00 site situation directed by Engineer In charge.(8) Computer RJ-45 socket (Cat. 160.59 #NAME? Nos

Supplying & erecting approved make LAN cable of following size in existing

223 2000.00 pipe as per direction [D] CAT - 6 e 76.76 #NAME? Nos

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per

site situation directed by Engineer In charge.Decorative call bell Ting-tong box

type 250 volts complete erected

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of

coupling, PVC bushes, Check-nuts etc. complete of following sizes.

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of

coupling, PVC bushes, Check-nuts etc. complete of following sizes.

Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-

locking arrangement with grooves, trunking of size not below 12.5 mm in

height as per IS with accessories of PVC/Resin polypropylene not below 1.8 mm

thick duly sealed in joint & erected on wall / ceiling of following size . (3) 32 mm

Supplying and laying UPVC cable trunking system comprising unplasticised

polyvinyl, chloride rigid material with ignition free and flame proof confirming

BS with necessary end caps Internal and external bend, flat bends, coupler, tee

etc..All necessary accessories and measuring of following sizes

(2) 100 mm x 50 mm trunking

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

231 641.00 PVC insulated stranded wire of green colour for earth continuity of following 62.62 #NAME? Rmt.

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm (FRLS)

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of following

232 546.00 size 82.82 #NAME? Rmt.

(A) with medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm (FRLS)

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size (FRLS)

233 308.00 (A) with medium class Rigid PVC pipe and accessories 112.11 #NAME? Rmt.

(a) 2 wire 4 sq. mm (FRLS)

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size (FRLS)

234 400.00 (A) with medium class Rigid PVC pipe and accessories 147.46 #NAME? Rmt.

b) 2 wire 6 sq. mm. (FRLS)

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size (FRLS)

235 260.00 (A) with medium class Rigid PVC pipe and accessories 236.34 #NAME? Rmt.

(c) 2 wire 10 sq. mm (FRLS)

Providing & erecting Switch board for Computer or electric apparatus

consisting of following modular type accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with necessary

236 15.00 connections as directed 1133.22 #NAME? Ea.

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories (Cat III )

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or

237 300.00 in existing trench / pipe of following size of cables of cables 731.24 #NAME? Rmt.

(G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or

238 274.00 in existing trench / pipe of following size of cables of cables 540.35 #NAME? Rmt.

(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or

239 75.00 in existing trench / pipe of following size of cables of cables 284.82 #NAME? Rmt.

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or

240 55.00 in existing trench / pipe of following size of cables of cables 220.18 #NAME? Rmt.

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand /

Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary

241 100.00 clamps or in existing trench / pipe of following size of cables 140.39 #NAME? Rmt.

c) 4 Core 10 Sq.mm.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

242 125.00 existing trench / pipe at road crossing or floor of following size of cable. 215.13 #NAME? Rmt.

B) 3 Core 2.5 Sq.mm.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

243 105.00 existing trench / pipe at road crossing or floor of following size of cable. 287.85 #NAME? Rmt.

B) 3 Core 4 Sq.mm.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

244 135.00 existing trench / pipe at road crossing or floor of following size of cable. 395.92 #NAME? Rn.Mtr

B) 3 Core 6 Sq.mm.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

245 135.00 existing trench / pipe at road crossing or floor of following size of cables.(A) 676.70 #NAME? Rn.Mtr

4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring

for PVC insulated armoured cable complete with out going tails, insulating tape

246 55.00 etc for following size of cables. 33.33 #NAME? No.

(a) 2 to 4 core 2.5 / 4 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring

for PVC insulated armoured cable complete with out going tails, insulating tape

247 45.00 etc for following size of cables. 38.38 #NAME? No.

(b) 2 to 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring

for PVC insulated armoured cable complete with out going tails, insulating tape

248 21.00 etc for following size of cables. 38.38 #NAME? No.

(c) 2 to 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring

for PVC insulated armoured cable complete with out going tails, insulating tape

249 5.00 etc for following size of cables. 135.34 #NAME? No.

(C) 3 core 95 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring

for PVC insulated armoured cable complete with out going tails, insulating tape

250 9.00 etc for following size of cables. 154.53 #NAME? No.

(D) 3 core 120 Sq. mm

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing and, fixing heavy duty flange type brass cable gland with rubber ring

for PVC insulated armoured cable complete with out going tails, insulating tape

251 5.00 etc for following size of cables. 172.71 #NAME? No.

(E) 3 core 150 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring

for PVC insulated armoured cable complete with out going tails, insulating tape

252 5.00 etc for following size of cables. 219.17 #NAME? No.

(F) 3 core 185 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring

for PVC insulated armoured cable complete with out going tails, insulating tape

253 15.00 etc for following size of cables. 280.78 #NAME? No.

(I) 3 & 1/2 core 300 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to

254 25.00 switchgear terminals with brass/cadmium plated nut bolts in an approved 13.13 #NAME? No.

(B) 10 Sq.mm (ISI MARKED)

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

(C) 16/25 Sq.mm. (ISI MARKED)

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to

256 3.00 switchgear terminals with brass/cadmium plated nut bolts in an approved 45.45 #NAME? No.

mann(G) 120 Sq.mm.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to

257 3.00 switchgear terminals with brass/cadmium plated nut bolts in an approved 61.61 #NAME? No.

mann(H) 150 Sq.mm.

Solder less crimping type Copper lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

258 70.00 manner 8.08 #NAME? No.

(A) 1.5/2.5 to 6 Sq.mm (ISI MARKED)

Solder less crimping type Copper lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

259 32.00 manner 10.10 #NAME? No.

(B) 10 Sq.mm (ISI MARKED)

Solder less crimping type Copper lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

260 25.00 manner 12.12 #NAME? No.

(C) 16 Sq.mm (ISI MARKED)

Providing and erecting Epoxy Outdoor / Indoor end termination Kit suitable for

LT PVC insulated armoured cable1.1 KV grade complete with ferrule bushing

and accessories and suitable clamps duly erected and connected to the supply

261 5.00 for all cores cables of following size. 381.78 #NAME? No.

Providing and erecting Epoxy Outdoor / Indoor end termination Kit suitable for

LT PVC insulated armoured cable1.1 KV grade complete with ferrule bushing

and accessories and suitable clamps duly erected and connected to the supply

for all cores cables of following size.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing and fixing approved make Perforated C type cable tray. Made from

pre- galvanized sheet steel. The cable tray should be bended as per IS

2062/1079 . with max 17.5% perforation with coupler plate / Fish plate and GI

263 66.00 hardware like nut - bolt and washers etc. erected on existing support as per 471.67 #NAME? Rmt.

Specification and as per instruction of engineer in charge..

5-300 X 50 X 1.5 mm Thick

Providing and fixing approved make 'T' Junction for Perforated C type cable

tray. Made from pre galvanized sheet steel. The Junction should be bended as

per IS 2062/1079. with max 17.5% perforation with coupler plate / Fish plate

264 5.00 and GI hardware like nut - bolt and washers etc. erected on existing support as 249.47 #NAME? Nos

per Specification and as per instruction of engineer in charge..

5)-300 X 50 X 1.5 mm Thick ' T' Junction

Providing and fixing approved make '90° Elbow' for Perforated C type cable

tray. Made from pre galvanized sheet steel. The Junction should be bended as

per IS 2062/1079. with coupler plate / Fish plate and GI hardware like nut -

265 5.00 bolt and washers etc. erected on existing support as per Specification and as 219.17 #NAME? Nos

per instruction of engineer in charge..

5-300 X 50 X 1.5 mm Thick 90° Elbow

Providing , erecting , fabricating the M.S. structure as per requirement on site

incorporating proper size of M.S. angles,square,round, flats, bars, channels,

sections complete with cutting, welding, grinding & finishing duly painted with

one coat of red oxide with erection on site as per direction of engineer in

charge with necessary grouting, cementing, plastering & finishing complete.

(for Cable Tray support).

SECTION 4.00 SWITCHGEARS & DISTRIBUTION BOARDS

MINIATURE CIRCUIT BREAKERS.

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable

to operate on 240 V A.C. system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI Mark (QTY FOR

MCB OF DB AND MCB OF PANEL)

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing & erecting 240 V MCB double pole switch for motor & inductive load

(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing

268 13.00 box having following capacity (B) 40 Amp. 330.27 #NAME? Ea.

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity ((QTY FOR MCB OF DB AND MCB OF PANEL)Also

consider in general)

(c)63 Amp. Cat.III

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same company of MCB to be used)

270 1.00 suitable for 1492.78 #NAME? Nos

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

(iv)12 way Cat-III

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same company of MCB to be used)

(B) three phase incoming and single phase horizontal type outgoing Per phase

isolation type (PPI)

(b) sheet steel double door (IP-43)

(iii)8 way Cat-III

Supply installation Testing and commissioning of Surge Protection Device shall

be Type-2 for DB LEVEL and IEC 61643-11/2011 T2 and EN 61643-11 Type

272 1.00 for internal protection with drill type mounting 12951.23 #NAME? No

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at 415 V. having normal current rating

125A. with Fixed thermal & magnetic release suitable to work on A.C.supply

c/s. with all internal connections, spreader tinned copper & complete erected

in existing 16 G.M.S. housing.

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. and above at 415 V . having normal

current rating 250A. with variable thermal & magnetic release suitable to work

on A.C.supply 50 c/s. with all internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing.

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 50 KA and above at 415 V having Normal

current rating 400A. with variable Thermal & magnetic release suitable to work

on A.C.supply 50 c/s. With all internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing.

Operational Handle Assembly Complete for (i) 32 / 63 / 125 Amps

The cost inclusive of spreader links and rotary handle. No extra price will be

provided for the same. ICS=100% of ICU only Cat III

Operational Handle Assembly Complete for (ii) 200 / 250 / 320 / 400 / 630 /

277 2.00 The cost inclusive of spreader links and rotary handle. No extra price will be 754.47 #NAME? No

provided for the same. ICS=100% of ICU only Cat III

Operating Shaft (Extensible) for (i) 32 / 63 / 125 Amps

Operating Shaft (Extensible) for (ii) 200 / 250 / 320 / 400 / 630 / 800 Amps

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supplying and erecting triple pole & neutral 440V / 500V panel mounting

Copper Busbars with four equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of following current

280 4.00 carrying capacity, erected with necessary bus bar supports /insulators, main 3202.71 #NAME? Rmt.

cable socket to each bar, erected in existing cubical panel with necessary

(B) Suitable for 200 Amp. capacity

Supplying and erecting triple pole & neutral 440V / 500V panel mounting

Copper Busbars with four equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of following current

281 4.00 carrying capacity, erected with necessary bus bar supports /insulators, main 4909.61 #NAME? Rmt.

cable socket to each bar, erected in existing cubical panel with necessary

(C) Suitable for 300 Amp. capacity

Supplying and erecting triple pole & neutral 440V / 500V panel mounting

Copper Busbars with four equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of following current

282 5.00 carrying capacity, erected with necessary bus bar supports /insulators, main 7319.47 #NAME? Rmt.

cable socket to each bar, erected in existing cubical panel with necessary

(D) Suitable for 400 Amp. capacity

Supplying and erecting triple pole & neutral 440V / 500V panel mounting

Copper Busbars with four equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of following current

283 3.00 carrying capacity, erected with necessary bus bar supports /insulators, main 1961.42 #NAME? Rmt.

cable socket to each bar, erected in existing cubical panel with necessary

A) Suitable for 100 Amp. Capacity

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing & erecting weather proof, dust & vermin proof, floor mounted front

operated indoor type cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge made from 14 SWG thick

CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with internal partitions &

cable alley as per requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size of inter connecting

PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite

control fuses/MCB for measuring instruments, earth bus & earth bolts,

284 3.00 foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles 19387.96 #NAME? Sqm

with locking arrangement and rubber gasket,heavy duty end terminal

connection,danger notice board,necessary ventilation,earthing strip complete.

The Panel shall be painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured

excluding base beams) The panel shall be supplied with following approved

manufacturers with following size.

(B) The standard companies switch gear shall be used and only manufacturers

at CPRI approved factory

(ii) with 550 mm. depth

(i) with 350mm depth

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size

286 10.00 (Specifically for control panel, relays, power switchgears, motor starters & 37.37 #NAME? Rmt.

control wiring) with required size of copper lugs, nuts and bolts if required.

(e) One wire 4.00 sq. mm

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size

287 10.00 (Specifically for control panel, relays, power switchgears, motor starters & 56.56 #NAME? Rmt.

control wiring) with required size of copper lugs, nuts and bolts if required.

(f) One wire 6.00 sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size

288 12.00 (Specifically for control panel, relays, power switchgears, motor starters & 91.91 #NAME? Rmt.

control wiring) with required size of copper lugs, nuts and bolts if required.

(f) One wire 10.00 sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size

289 10.00 (Specifically for control panel, relays, power switchgears, motor starters & 142.41 #NAME? Rmt.

control wiring) with required size of copper lugs, nuts and bolts if required.

(g) One wire 16.00 sq. Mm

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size

290 8.00 (Specifically for control panel, relays, power switchgears, motor starters & 236.34 #NAME? Rmt.

control wiring) with required size of copper lugs, nuts and bolts if required.

(h) One wire 25.00 sq. Mm

Supplying and erecting approved make panel mounting type Digital Voltmeter

having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel

291 1.00 board with all connection, wiring etc .with manufacturers calibration certificate. 1275.63 #NAME? No.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supplying and erecting approved make panel mounting type Digital Ammeter

having 3 digits LED display, external CT operated, calibrated for 0 to

Amps suitable to operate on 500 Volt AC , erected on existing panel board with

all connection, wiring etc .with manufacturers calibration certificate.

Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5

ratio 15 VA burden erected in existing CRCA box duly secured with insulating

293 3.00 materials connected to the meter 274.72 #NAME? No.

Supplying and erecting approved make suitable panel indicator lamps of LED

type lamp, lens cover, Bakelite holder complete erected with necessary

294 3.00 connections.WITH SWITCH FOR BMS INTEGRATION FOR ALL FEEDERS OF 43.43 #NAME? No.

PANELS. (For R-Y-B & on-off-trip indication)

Supplying & fixing Steel Chequered Plate having 7 mm thickness, duly painted

with two coats of black Japan colour. (Average Wt 61.1 kg / Sq.Mtr)

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver

296 35.00 efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below 373.70 #NAME? No

description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name 160V to 270V,Power

Factor more than 0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy>

85 lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision

for spring loaded mounting clips complete.IP20

(iii) 20 watts, Surge-2 KV

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver

efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown.)

(i) 10 Watts, Surge-2 KV, IP-20, conventional 2 feet

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name 120 to 300 V,Power

Factor more than 0.9, THD < 10 %,

CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED efficiency

LED driver efficiency > 85 % (B) LED Panel Light with provision for Plane front

frame with translucent cover fixed to housing complete.IP20 (e) 24 watts, 12" x

12" , Surge-2 KV

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name 120 to 300 V,Power

300 35.00 Factor more than 0.9, THD < 10 %, 1794.77 #NAME? No.

CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED efficiency

lumens/watt. LED driver efficiency > 85 % (B) LED Panel Light with provision

for Plane front frame with translucent cover fixed to housing complete.IP20 (f)

36 watts, 24" x 24" mm, Surge- 2KV

Providing and erecting Approved make Ceiling fan with double ball bearing ISI

mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy

301 38.00 erected on existing hook or clamp with earthing. [Make shall be approved by 1596.81 #NAME? No.

Engineer in charge]

FAN ACCESSORIES.

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe

302 73.00 down rod erected duly painted for fan complete with proper insulation without 108.07 #NAME? Rmt.

leakage and earthing.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the

RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S.

303 38.00 box / Heavy Duty PVC box complete erected concealed in Ceiling with 108.07 #NAME? No.

necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box.

TABLE FANS, EXHAUST FANS & ACCESSORIES.

Supplying & erecting approved make low noise decorative exhaust fan having

305 7.00 square frame ABS body with inbuilt lowers & square frame. 1366.53 #NAME? No.

250mm with 1350 RPM cat-ii

Supplying and erecting approved make Pedestal Circulatory fan A.C. 230 V.

Cy/s. 600 mm sweep and adjustable height complete with guard, & standard

lead flexible wires and plug top. Cat.II

SECTION 6.00 EARTHING AND LIGHTINING PROTECTION

Providing and erecting required size Copper strip for earthing of H.T. OCB /

ACB/ Transformer, LT panel board, Motors etc. using copper clamp.

Providing and erecting Annealed bare Copper wire 8 to 16 SWG.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supplying & erecting earth pit of minimum bore dia.150mm size approved

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover. (A)(approved make OEM has

to submit test certificate including value of earth resistance of installation duly

309 4.00 stamped and signed by agency and officer Incharge has to ensure the value of 5760.03 #NAME? No.

earthing resistane mentioned in test Certificate) & having back filling

compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry

form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time Necessary test report must

be submitted by Agency.

(b)For Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs Back filling Compound :1 no. Bag of 25 Kg.

Supplying and erecting horizontal / vertical mounting type storage water

heater with copper container housed in M.S./S.S. body insulated with glass

wool / puff complete with heating elements,adjustable thermostats 300C to

310 1.00 850C, indicating lamp, safety valve, fusible plug, etc.complete erected with 11455.42 #NAME? Nos.

coach bolts, nuts. washers & cementation (C)25 Ltr. with 2 KW. heating

element .premium Category

Supplying submersible pump set suitable for bore of 100 mm. dia. or more

having three phase motor capacity not more than 5 H.P. with following

311 1.00 capacity.(b) (16 stage) 140 to 180 LPM discharge at 96 to 69 mtrs. head 22374.53 #NAME? Nos.

respectively suitable for 50mm dia. delivery pipe

Supplying and erecting Direct-on-line, Starter with 15A.rating contractor and

with 4-14A. range, directly operated thermal overload relay in sheet steel

312 1.00 enclosure for 3phase 415V.50 c/s. A.C. motor up to 7.5 H.P.complete erected 2046.26 #NAME? Nos.

on P.W. Block with necessary connection. Cat-lll

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible

Submersible copper cable approved make of following Size. (b) 3 Core x

Providing and erecting approved make split air-conditioning unit consisting of

copper condensing unit with fan motor, hermetically sealed rotary compressor

with accessories etc. duly connected separately erected evaporating unit and

blower motor with its accessories by means of extra supplied proper insulated

314 2.00 copper tubing,drain PVC pipes suitable for ( cost includes powder coated Stand, 45209.62 #NAME? Nos.

Eco Friendly green gas charging, 15A plug top & Remote Control) with

necessary core cutting.(2)For ISEER Range (KWH/KWH)(4.0 to 4.49) (b) for

Making trench in soft soil of suitable width of 90 cm deep for laying cable or

locating the fault all over the run and back filling the same and making the

surface as normal ground.

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories

316 450.00 of same material at required depth in existing trench for laying of cable. below 62.62 #NAME? Rmt

ground / road surface for enclosing cable (A)50 mm outer dia

Providing & Erecting full SS Body (SS 304) Split type water cooler having

storage capacity 160 to 175 Ltr.(Tank SS 304) & Cooling capacity 150 ltr. Per

hour @ an ambient temp of 350 C.The outlet temp. of the water should drop

by 150C within a hour,The water cooler should be comprising of hermetically

sealed Reciprocating compressor with R134A, fan motor, Copper Condensing

317 1.00 unit with company fabricated Outdoor Unit water tank surrounded by 61115.10 #NAME? Nos.

evaporating coil, thermostats, relay etc.complete with necessary copper tube &

Insulation, M.S Chanel Stand with Painting for water tank & M.S. Powder

Coated Stand for Outdoor unit with Installation. With DPELCB and 4 Way DB

Box with accessory Three core Cord for connection.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supplying & erecting 5 stage single reverse osmosis water purification system

with M.S. powder coated frame, prefilter housing with 'O' ring presediment

filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention

318 1.00 with 40 psi inline type post carbon filter auto low & high pressure switches 29187.99 #NAME? Nos.

with following size of storage tank & LPH capacity & erected as directed

Supply Installation, Testing & Commissioning of modular type Variable

Refrigerant Volume air cooled Outdoor units suitable for cooling and heating,

having all hermetically sealed inverter type Scroll Compressor(s),

microprocessor based Controller, top discharge type condensing unit(s), with

R410 A Refrigerant (Or Eco Friendly Green Gas if any), vibration isolators, with

suitable foundation, MS Stand for Unit with necessary paint etc. complete as

required. The unit shall deliver the rated capacity at AHRI Conditions and work

319 2.00 even at 50°C ambient temperature without tripping. The unit shall be suitable 253950.36 #NAME? Nos.

to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be

filled with first charge of the refrigerant and ready for use as required. The COP

at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5. (Design

should be got approval before execution from engineer in charge)

INDOOR UNIT-CASSETTE TYPE

Supply, installation, testing and commissioning of following minimum capacity

4-way/2 way/radial flow as per approval VRV Cassette Type Indoor ceiling

mounted unit equipped with synthetic washable media pre-filter, fan section

with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain

pump, grill, necessary supports, vibration isolation, cord less remote control

320 2.00 etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, max 28554.72 #NAME? Nos.

noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit

shall have automatic force shut down provision in case of fire on receiving

signal from BMS System. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB temperature fresh air

provision compatible for Remote Operation Syst

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

INDOOR UNIT-CASSETTE TYPE

Supply, installation, testing and commissioning of following minimum capacity

4-way/2 way/radial flow as per approval VRV Cassette Type Indoor ceiling

mounted unit equipped with synthetic washable media pre-filter, fan section

with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain

pump, grill, necessary supports, vibration isolation, cord less remote control

321 2.00 etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, max 29010.23 #NAME? Nos.

noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit

shall have automatic force shut down provision in case of fire on receiving

signal from BMS System. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB temperature fresh air

provision compatible for Remote Operation Syst

INDOOR UNIT-CASSETTE TYPE

Supply, installation, testing and commissioning of following minimum capacity

4-way/2 way/radial flow as per approval VRV Cassette Type Indoor ceiling

mounted unit equipped with synthetic washable media pre-filter, fan section

with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain

pump, grill, necessary supports, vibration isolation, cord less remote control

322 2.00 etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, max 30119.21 #NAME? Nos.

noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit

shall have automatic force shut down provision in case of fire on receiving

signal from BMS System. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB temperature fresh air

provision compatible for Remote Operation Syst

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

INDOOR UNIT-CASSETTE TYPE

Supply, installation, testing and commissioning of following minimum capacity

4-way/2 way/radial flow as per approval VRV Cassette Type Indoor ceiling

mounted unit equipped with synthetic washable media pre-filter, fan section

with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain

pump, grill, necessary supports, vibration isolation, cord less remote control

323 2.00 etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, max 30764.60 #NAME? Nos.

noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit

shall have automatic force shut down provision in case of fire on receiving

signal from BMS System. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB temperature fresh air

provision compatible for Remote Operation Syst

INDOOR UNIT-CASSETTE TYPE

Supply, installation, testing and commissioning of following minimum capacity

4-way/2 way/radial flow as per approval VRV Cassette Type Indoor ceiling

mounted unit equipped with synthetic washable media pre-filter, fan section

with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain

pump, grill, necessary supports, vibration isolation, cord less remote control

324 2.00 etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, max 31922.06 #NAME? Nos.

noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit

shall have automatic force shut down provision in case of fire on receiving

signal from BMS System. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB temperature fresh air

provision compatible for Remote Operation Syst

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

COPPER REFRIGERANT PIPING

Supply, Installation, testing and commissioning including vaccumiazation and

Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV system, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including accessories,

insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as

given below for Suction and Liquid lines, all accessories as per specifications etc

with necessary refrigerant joint as required :

a) 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick

COPPER REFRIGERANT PIPING

Supply, Installation, testing and commissioning including vaccumiazation and

Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV system, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including accessories,

insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as

given below for Suction and Liquid lines, all accessories as per specifications etc

with necessary refrigerant joint as required :

b) 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick

COPPER REFRIGERANT PIPING

Supply, Installation, testing and commissioning including vaccumiazation and

Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV system, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including accessories,

insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell

327 45.00 elastometric nitrile rubber tubular sleeves sections of specified thickness as 511.06 #NAME? R Mtr.

given below for Suction and Liquid lines, all accessories as per specifications etc

with necessary refrigerant joint as required :

c) 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

COPPER REFRIGERANT PIPING

Supply, Installation, testing and commissioning including vaccumiazation and

Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV system, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including accessories,

insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as

given below for Suction and Liquid lines, all accessories as per specifications etc

with necessary refrigerant joint as required :

d) 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm

thick insulation

COPPER REFRIGERANT PIPING

Supply, Installation, testing and commissioning including vaccumiazation and

Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV system, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including accessories,

insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as

given below for Suction and Liquid lines, all accessories as per specifications etc

with necessary refrigerant joint as required :

e) 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick

COPPER REFRIGERANT PIPING

Supply, Installation, testing and commissioning including vaccumiazation and

Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV system, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including accessories,

insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as

given below for Suction and Liquid lines, all accessories as per specifications etc

with necessary refrigerant joint as required :

f) 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

COPPER REFRIGERANT PIPING

Supply, Installation, testing and commissioning including vaccumiazation and

Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV system, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including accessories,

insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as

given below for Suction and Liquid lines, all accessories as per specifications etc

with necessary refrigerant joint as required :

g) 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm

thick insulation

COPPER REFRIGERANT PIPING

Supply, Installation, testing and commissioning including vaccumiazation and

Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV system, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including accessories,

332 40.00 insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell 1202.91 #NAME? R Mtr.

elastometric nitrile rubber tubular sleeves sections of specified thickness as

given below for Suction and Liquid lines, all accessories as per specifications etc

with necessary refrigerant joint as required :

h) 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm

thick insulation

Control Cables and Wires

Supply installation testing commissioning Shielded Control Cables for VRV

System with necessary ISI mark Medium class rigid PVC pipes with necessary

accessories with termination in machine and control equipments.

a) 2C X 1.5 Sq mm Shielded Armoured

b) 3C X 1.5 Sq mm Shielded Armoured

c) 4C X 1.5 Sq mm Shielded Armoured

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Central Control System

Central wired Remote Control System

Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber

Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber

Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber

Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber

Supply, Installation, Testing and Comissioning of 2 Core X 1.5 Sq.mm FRLS PVC

341 500.00 insulated armoured copper conductor cable. 117.16 #NAME? RMT

Supply, Installation, Testing & Commissioning of UL268 6th and 7th edition

compliance and FM approved Intelligent Addressable multi-criteria detector

(optical and thermal sensors) complete with standard base, facility to mount in

different comprehensive environment, Tri-color detector-status LED with 360 °

view, microprocessor circuitry with error check; detector self-diagNos.stics and

supervision programs,Rate-of-Rise Detection: 15°F / min. (8.3°C / min.) - Fixed:

135°F (57°C) , Field programmable as rate-of-rise or fixed temperature, Polarity

insensitive, Superior EMI and RFI immunity, RoHS compliant. Detector shall

have in-built isolator for better reliability, circuit integrity and advanced fault

finding. Manufacturers Nos.t having in-built Isolator feature in detector shall

consider Isolator base in place of standard base OR separate Isolator before

and after every detector to comply the same without any extra cost. (For

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supply, Installation, Testing & Commissioning of UL268 6th and 7th edition

compliance and FM approved Intelligent Addressable multi-criteria detector

(optical and thermal sensors) complete with standard base, facility to mount in

different comprehensive environment, Tri-color detector-status LED with 360 °

view, microprocessor circuitry with error check; detector self-diagNos.stics and

supervision programs,Rate-of-Rise Detection: 15°F / min. (8.3°C / min.) - Fixed:

135°F (57°C) , Field programmable as rate-of-rise or fixed temperature, Polarity

insensitive, Superior EMI and RFI immunity, RoHS compliant. Detector shall

have in-built isolator for better reliability, circuit integrity and advanced fault

finding. Manufacturers Nos.t having in-built Isolator feature in detector shall

consider Isolator base in place of standard base OR separate Isolator before

and after every detector to comply the same without any extra cost. (For

Supply, Installation, Testing & Commissioning of Response Indicator - Dual LED

344 1.00 Listed and approved as per Technical Specification . 313.10 #NAME? Nos.

Supply, Installation, Testing & Commissioning of UL Listed and FM approved

Intelligent Addressable Rate of Rise and Fixed temperature detector complete

with standard base, Seven (7) field-selectable settings in a temperature range

of 135°F – 174°F (57.2°C – 78.9°C) , a low-temperature warning of 40°F (4.4°C),

facility to mount in different comprehensive environment, Tri-color detector-

status LED with 360 ° view, microprocessor circuitry with error check; detector

345 2.00 self-diagNos.stics and supervision programs, Field programmable as rate-of-rise 4151.10 #NAME? Nos.

or fixed temperature, Polarity insensitive, Superior EMI and RFI immunity,

RoHS compliant. Detector shall have in-built isolator for better reliability,

circuit integrity and advanced fault finding. Manufacturers Nos.t having in-built

Isolator feature in detector shall consider Isolator base in place of standard

base OR separate Isolator before and after every detector to comply the same

without any extra cost.

Supply, Installation, Testing And Commissioning of 24 VDC, 10A for Supply

346 2.00 Power for Hooter. 2939.10 #NAME? Nos.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supply, Installation, Testing & Commissioning of UL listed and FM approved

Intelligent addressable Class X type (Style 7), Manual Pull Station Single Action,

Shock and Vibration Resistant, with built in dual isolator, polarity insensitive,

Tri color LED for status (Green for Nos.rmal,Yellow for Faulty and RED for

activation), T-45 Key Reset lockset for easy maintenance, Operating Temp and

RH: 0-49degC and <=95%. MCP shall have in-built isolator for better reliability,

circuit integrity and advanced fault finding. Manufacturers Nos.t having in-built

Isolator feature shall provide separate Isolator before and after every MCP to

comply the same without any extra cost.

Supply, Installation, Testing & Commissioning of UL Listed Sounder cum Strobe

rated at 75 dBA @ 3m for Audible annunciation and 75cd flashintg at 1 Hz for

visual indication.

Supply,Instllation,Testing and Commissioning of UL listed and FM approved

Intelligent addressable Class X type (Style 7), Control Module with built in dual

isolator, polarity insensitive, Tri color LED for status (Green for Nos.rmal,Yellow

for Faulty and RED for activation), Operating Temp and RH: 0-49degC and

<=95%. Module shall have in-built isolator for better reliability, circuit integrity

and advanced fault finding. Manufacturers Nos.t having in-built Isolator feature

shall provide separate Isolator before and after every Module to comply the

same without any extra cost. (For AHU & Staircase Pressurization Fans, Hooters

/ Sounders / Strobes etc.)

Supply,Instllation,Testing and Commissioning of UL listed and FM approved

Intelligent addressable Class X type (Style 7), Mini Monitor Module with built in

dual isolator, polarity insensitive, Tri color LED for status (Green for

Nos.rmal,Yellow for Faulty and RED for activation), Operating Temp and RH: 0-

49degC and <=95%. Module shall have in-built isolator for better reliability,

circuit integrity and advanced fault finding. Manufacturers Nos.t having in-built

Isolator feature shall provide separate Isolator before and after every Module

to comply the same without any extra cost. (For third Party Itegration)

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supplying, installation, testing & commissioning of main control and indicating

panel made out of 16 SWG MS sheet to accommodate the following items duly

powder coated in approved colour with louvers for ventilation, locking

arrangement, audio and visual indication for fire alarm and public address

system, monitoring system including connections, interconnections etc

complete as reauired.

10 Zone panel for fire alarm system

250 Watt amplifier racks suitable for operation on 230V AC/24V DC supply

conforming to IEC-268-3 complete with all accessories as required - 2 Nos. (one

to act as standby)

Talk back master station with LED PTT (press to talk) push button for operation

351 1.00 on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of 71092.89 #NAME? No.

operation/communication suitable for 20 Nos.talk back unit-1 set.

Annoucement control desk suitable for selection of different zones selectively

and ON ALL CALL switch with visual indication etc.

complete as required -1 set.

Amplifier change over switch for inter changing amplifier -1 No.

Monitor panel for loudspeaker complete with output selector,

ON/OFF switch, fuse, visual indications etc. complete as required-

No. Gooseneck microphone with stand and ON/OFF switch- 1 No.

Main ON/OFF switch, fuse indication lamps, DC and AC voltmeters &

ammeters, terminal blocks etc. complete as required -1 set

Battery charger trickle cum boost to take complete load of fire alarm & PA

Supply, Installation, Testing & Commissioning of UL864 Listed Repeater Panel

having 4x40 Character alphanumeric LCD screen, backlit upon status change or

352 1.00 display toggling, Class-A and Class-B Wiring supported, Audible and Event 70700.00 #NAME? Nos.

based LEDs with Inbuilt Buzzer.

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

Supply, Installation, Testing and Comissioning of 4MP Fixed Lens Dome Type

Camera, H.265 4MP IR Vandal Proof Dome N/W Camera, 2.8mm/3.6mm,

30M IR, Micro SD, DC12V/PoE, IP67/IK10, Basic IVA, 1 / 2.7" CMOS,

2560 × 1440, 0.01 Lux, F1.2, AGC ON; Defog, True day/night, Digital

353 8.00 WDR, 3D DNR, HLC & BLC, Triple streams, Smart codec by ROI, Cyber 7678.02 #NAME? Ea.

Security, Basic intelligent video analytics, NDAA Compliance, UL, CE, FCC

Certified (Including Five year free maintenance with guarantee)

Supply, Installation, Testing and Comissioning of 5 MP Motorised Varifocal Lens

Bullet Camera - H.265 5MP IR Bullet N/W Camera, 25/30FPS, Motorised

Varifocal 2.8-12mm, IR up to 70M, Micro SD support up to 128GB, DC12V/PoE,

IP67/IK10, Basic IVA, 2 MP resolution (2592 × 1944), True day/night, Digital

354 4.00 WDR, 3D DNR, HLC & BLC, Triple streams, Smart codec by ROI, Cyber 12625.00 #NAME? Ea.

Security, Intelligent video analytics, NDAA Compliance, UL, WEEE, REACH

CE, FCC Certified, IK10 & IP67, Opp Temp - 30 °C

to 60 °C, ONVIF S,G,T (Including Five year free maintenance with guarantee)

Supply, Installation, Testing and Comissioning of 8 TB Hard Disk .

SITC of 50 Inch Android Professional Display, 43" / 139 cm diagonal, 16:9, UHD,

Pixel Pitch : 0.105 (H) x 0.315 (V)mm, USB Supported HDD, Hotel Mode, CEC,

Dolby Audio, Bluetooth, 802.11a/b/g/n 2.4G 2T2R, Built-in, CPU : Cortex- A55 x

356 1.00 4.1.1 GHz Processor, GPU : Triple core Mali470 600 MHz (Including Five year 35350.00 #NAME? Ea.

free maintenance with guarantee)

Estimated Rates

Total Qty Item Description Unit Amount

No. In Rupees In Words

SITC of Client Workstations designed & reccomended by OEM to meet the

following Criteria :

- CPU : i5or higher, RAM : 8 GB or Higher, OS HDD : Solid State 256 GB,

- OS : as reccomended by OEM, Anti Virus Pre-loaded

- Graphics Card : NVIDIA P2200 or Equivalent with 2 GB or more VRAM,

Monitor Support

24 Inch Display

I/We am/are willing to carry out the work at …………………………………………………………………………………….. % above / below percent (should be written in figures and words) of the estimated rate

mentioned above. Amount of my/our tender works out as under.

* Estimate Amount Estimate Amount

Put to tender Rs…………………………………… Put to tender Rs……………………………………

Deduct………..% below Rs…………………………………… Add……..% above Rs……………………………………

(* Please strike out whichever is not applicable).

Note 1 All works shall be carried out as per Public Work Department Handbook and other specification of Division or as directed

Note 2 All the columns in Schedules should be filled in ink and the total of the entries ink last column should be struck by the contractor under his signature

Dy. Executive Engineer(Civil) Dy. Executive Engineer(Elect) Executive Engineer(Civil) Executive Engineer(Elect)

PIU Zone-7, Dang PIU Zone-7, Dang PIU Zone-7, Valsad PIU Zone-7, Surat