Repairing And Renovation work of Govt. Boys Hostel At Khedbrahma, Dist.-Sabarkantha

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

1 Providing and fixing MS safety grills of 4282.00 112.72 Kg

Required pattern for Door using 16mm dia

MS polished bars at 10 Cm C/C spacing

inserted and welded from inside to

rectangular box type frame CRC Pipes of

Required Size at required spacing as per

design and hold fasting with coach bolts

including one coat of red oxide primer and

two coats of matt finished oil painting etc

2 Providing and fixing machine cut, free edges, 382.00 2510.86 Sq.mt.

mirror polished Granite stone slab 18 mm

thick for vertical wall/Doors/Windows

Sill,Jams for cladding as per design

including full moulded round inside edge and

laid on 10 mm thick cement mortar 1:3 (

cement: 3 coarse sand) jointed with grey

cement slurry including rubbing and polishing

finishing etc. complete.

3 Providing & fixing MS Door Fixed by MS 15136.00 112.72 Kg

framing by using Angle 40x6 mm size nd

Zinc coated hinges with Double /single

shutter of MS Door ,Having 6 mm Plate On

Both Sides & 25mm Thick framing angle

Around The Door and also in middel rail

From handle on both side ,MS Stopper

CM,SS Aldrop 30CM both side each shutter,

fixtures & fastenings as directed by Engineer

in Charge, etc. complete.

4 Providing and Fixing of 100 X 50 mm thick 128.00 2377.76 Sq.mt.

FRP frame with 35mm thick FRP shutter

with 1.5 to 2.0 mm thick fire retardent grade

FRP skin in wood grain rasied panel design

having extra reinforcement on sides &

edges & in polish design finish. The core of

the shutter is to be filled up with

injected retardent grade polyurethane foam

done in situ alongwith embedded wooden

pieces for stiffening & also taking hinges

& fixtures. The whole shutter is to be

water proof, weather proof, termite proof

& resistance to mild acid/alkali. Rates are to

be inclusive of S.S hinges with necessary

screws & alluminium S.S finish fixtures &

fastenings as per instruction of Engineer in

charge & approved make. Door - D1, D3, D5

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

5 Providing and fixing Louvers in G.I Channel 29.00 2688.62 Sq.mt.

40x32x5mm size And 114mm Wide G.I

Sheet Having Thickness of 0.55mm &

Weight Not Less Than 490 Gm/Mtr. Roll

Formed to create 84mm wide Louver snap

fixed on special shaped G.I Channel,Channel

shall be Finished with Powder Coating For

Fix Louvers As Directed By Engineer In

6 Providing and laying Ceramic tiles 6mm thick 137.00 994.37 Sq.mt.

in flooring treads of steps and landing laid on

a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) finishing with flush

pointing in white cement(size 300x300 mm).

7 Providing and laying glazed tiles 30 cm x 1100.00 1487.88 Sq.mt.

45 cm size in skirting risers of steps and

dado on 10 mm. Thick cement plaster 1:3

(1 cement : 3 coarse sand) pointing in white

cement and jointed with white cement

slurry. Shade and pattern approved by

Architect Office

8 Providing laying and jointing in true line 120.00 72.65 Rmt

and level 15mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre

C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the

same with adhesive solvent, including cost

of all materials.

9 Providing laying and jointing in true line 120.00 91.84 Rmt

and level 25mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre

C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the

same with adhesive solvent, including cost

of all materials.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

10 Providing laying and jointing in true line and 130.00 148.12 Rmt

level 40 mm dia. U.P.V.C. Pipe ( SCH-40) for

cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre

C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the

same with adhesive solvent, including cost

of all materials.

11 Providing laying and jointing in true line and 130.00 195.67 Rmt

level 50 mm dia. U.P.V.C. Pipe ( SCH-40) for

cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre

C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the

same with adhesive solvent, including cost

of all materials.

12 Providing and fixing to wall ceiling floor 10 124.00 280.23 Rmt

Kg. F/Cm2 working pressure polythene pipes

for soil waste and ventilating pipes of the

following outside dia. low density,

complete with necessary fittings ,wall

clamps etc including making good the wall

ceiling and floor. {Finolex, Supreme, Prince

or equivalent brand}

13 Providing laying and jointing in true line and 400.00 876.11 Rmt

level 110 diameter U.P.V.C. SWR Type B

pipe confirming to IS 13592-1992 with one

end plain and other end socketed with

rubbering, & fitting conforming to ISI 14735-

1999 of approved make for drainage system

pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the

size 110 mm diameter x 149 mm length x

145 mm high at every 2000 mm center to

center or shall be concealed in walls as

directed including necessary fittings such as

bends, shoes etc. including testing of pipes

and joints and jointed with adhesive solvent

cement including cost of all materials.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

14 Providing laying and jointing in true line and 240.00 834.38 Rmt

level 160 diameter U.P.V.C. SWR Type B

pipe confirming to IS 13592-1992 with one

end plain and other end socketed with

rubbering, & fitting conforming to ISI 14735-

1999 of approved make for drainage system

pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the

size 160 mm diameter x 210 mm length x

196 mm high at every 2000 mm center to

center or shall be concealed in walls as

directed including necessary fittings such as

bends, shoes etc. including testing of pipes

and joints and jointed with adhesive solvent

cement including cost of all materials.

15 Providing and fixing Screw down Quarter 78.00 186.83 No.

turn bib taps of following size

(A) Brass chromium plated screw down Bib

tap (I) 15 mm dia {Plumber, Mark, Esco

equivalent brand}

16 Providing & fixing of first quality (ii) Flat Back 40.00 2180.59 No.

washbasin 550 mm x 400mm size. (i) In

white colour. including with approved

sanitary grade material with C.P waste

coupling, waste pipe, 15mm dia Pillar & Stop

Cock of approved brand with connection

15mm dia flexiable pvc pipe etc. complete.

17 Provision and fixing water closet squatting 38.00 1637.21 No.

orissa type W.C. pan size 580mm

integral footrest and 100 mm P or S

trap and including 25 mm dia CP brass

flush valve and GI inlet connection etc.

comp. (A) Vitreous china long pattern white

or color {Hindustan, Cera, Parryware or

equivalent }

18 Providing and fixing Urinal or approved 5.00 1142.77 No.

quality including conecting the Urinal with

waste pipe , tap etc complete.(A) White

earthenware flat back or corner type size

19 Dismentaling Kota &China mosaic tiled of 1237.00 49.18 Sq.mt.

stone floors laid in mortar including stacking

of serviceable materilas and disposal of

unserviceable materials with all lead and lift

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

20 Removing and scraping of old deteriorated 349.00 19.92 Sq.mt.

plaster of any thickness fromm wall / R.C.C

member including stacking of serviceable

material and disposal of unserviceable from

site of work with all lead and lift

21 20 mm. Thick sand faced GUTAKA 598.00 321.10 Sq.mt.

FINISHED cement plaster on walls upto

mt height above ground level consisting of

12 mm. Thick backing coat of c.m. 1:3 (1

cement : 3 sand) and 8 mm. Thick finishing

coat of c.m. 1:1 (1 cement : 1 sand)

including making groove 6 mm wide and

8 mm deep as approved pattern etc.

complete as directed.

22 Steel work, welded in built up sections 24.77 9108.48 Q

framed work including cutting, hoisting, fixing

in position and applying a priming coat of red

lead paint. (A)In beams and joists, channels

angles Tees, flats, with connecting plates or

angle cleats as in main and cross beams.

Hip and jack rafters, purlins conneted to

common rafters and the like

23 Providing and fixing of Ridge flashing for roof 107.66 867.39 Sq.mt.

panel shall be madeout of 0.5 mm thick pre

coated GI sheet . The Precoated sheetshall

be of minimum 240 mpa steel grade

confirming to IS14246:1995 and shall have

zinc coating of minimum 120 gsm asper

IS:277:1992 , 5-7 microns epoxy primer on

both side of thesheet and polyester top coat

15-18 micron. The PPGI Sheet shallhave

plastic protective guard film of minimum

microns toavoid scratches during

transportation. The ridge shall be fixed tothe

steel members by pop rivet or self drilling/self

stitchingfastners @ maximum 450 mm c/c

along length of capping/flashingetc complete

24 Finishing wall with weather proof exterior 14892.00 73.75 Sq.mt.

emulsion paint on wall surface (two coats)

to give an required shape even shade after

thoroughly brushing the surface to

remove all dirt, and remains of loose

powdered materials etc complete

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

25 Dismentling doors, windows, ventilators etc. 491.00 257.48 No.

(wood or steel) shutters including chowkhats

architraves, holdfasts and other attachment

etc. complete and stacking them within all

lead and lift.(ii) Exceeding 3 Sq.M. in area.

26 Providing erecting and fixing double coated 10000.00 3.95 Litre

ISI water tank of required capacity each with

all necessary fittings and connection etc.

complete on terrace

27 Providing and fixing window having extruded 238.00 1713.70 Sq.mt.

aluminum Colour anodized section frame

main outer size 63.50 x 38.10 x 1.95 mm,@

Wt 1.094 Kg / Rmt, horizontal two track

member size 61.85 mm x 31.75 mm x

1.20mm @ wt.of 0.695 Kg/mt, vertical

member of size 61.85 mm x 31.75mm x

mm @ wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x

vertical member of size 40mm x 18mm x

Kg/mt with 5 mm thick transparent bronze

colour tinted float glass with powder coated

aluminum fittings and fixtures and

transparent silicon sealant glass fixing to

frame as per details etc complete for

28 Providing and fixing Openable GI coated 4320.00 136.35 Kg

Sheet Febricated Door for cupbopard using

properly framed GI Angle and sheet as per

Cupboard size.The net shall be securely

fixed with Openable locking system shutters

to ensure easy operation and

durability.Complete in all respects including

necessary screws,fasteners,handles, and

accessories As Directed By Engineer In

29 Painting two coats (including priming coat) 621.00 129.04 Sq.mt.

on new steel and other metal surface with

enamel oil paint, brushing, interior to give an

even shade including cleaning the surface an

even shade including cleanicn the surface of

all dirt, dust and other foreign matter.

30 Excavation for foundation upto 1.5 m depth 281.00 625.31 Cum.

including sorting out and stacking of useful

materials and disposing off the excavated

stuff upto 50 Meter lead.(E) Hard Rock

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

31 Excavation for foundation for depth from 1.5 197.00 649.03 Cum.

m to 3.0 m including sorting out and stacking

of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(E) Hard

32 Excavation for foundation for depth from 3.0 192.00 672.73 Cum.

m to 5.0 m including sorting out and stacking

of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(E) Hard

33 Providing and laying controlled cement 65.00 4205.64 Cum.

concrete M-150 and curing complete

including the cost of form work and but

excluding cost of reinforcement for

reinforced concrete work in :(a) Foundations,

footings Bases of columns and the like and

Mass concrete.

34 Providing and laying controlled cement 39.00 4619.34 Cum.

concrete M-250 and curing complete

including the cost of form work but excluding

the cost of reinforcement for reinforced

concrete work in foundation footings, Raft,

base of columns and mass concrete.

35 Brick work using common Brunt clay 105.00 4214.33 Cum.

building bricks having crushing strength

not less than 35 Kg./Sq.cm In foundation

and plinth in cement mortar 1:6 (1cement :

fine sand)(b) Conventional

36 Providing and laying controlled cement 83.00 6525.61 Cum.

concrete M250 and curing complete

including the cost of form work but excluding

the cost of reinforcement for reinforced

concrete work for Slab All floors

37 Providing T M T. bar reinforcement of Fe- 6142.00 77.29 Kg

500D for R.C.C. work including bending

binding and placing in position complete up

to All floor Level

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

38 Point wiring by Point wiring for Light / Bell 65.00 582.77 Pts

with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type

switch / bell push & accessories and earth

continuity of following type, erected on PVC

/ Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white

front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC

pipe and accessories erected concealed in

wall/ceiling complete.Cat-III

39 Point wiring for FAN with 2-1.5 sq.mm & 20.00 809.01 Pts

earth wire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade FRLS PVC

insulated multi strand copper wires up to

mtr length, in below type of pipe erected

with 6A Modular type switch and hum free

EME step type electronic fan regulator

mounted and accessories with earth

continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white

front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed..(f)

with medium class Rigid PVC pipe and

accessories erected concealed in

wall/ceiling complete.Cat-III

40 Providing & erecting following type of 200.00 27.27 Nos.

Modular Type Accessories with necessary

connection. As desired by Engineer In

charge (1) 6 Amp. SP one way switch

41 Providing & erecting following type of 30.00 51.51 Nos.

Modular Type Accessories with necessary

connection. As desired by Engineer In

charge (2) 16 Amp. SP one way switch

42 Providing & erecting following type of 30.00 82.82 Nos.

Modular Type Accessories with necessary

connection. As desired by Engineer In

charge (3) 6/16Amp. Universal socket

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

43 Providing & erecting following type of 75.00 42.42 Nos.

Modular Type Accessories with necessary

connection. As desired by Engineer In

charge (4) 6 A socket

44 Providing & Erecting following Shockproof 100.00 219.17 Nos.

tissino type accessories erected on 3 mm

thick PC (Polycarbonate) sheet in PVC/

Metal/Wooden Box. erected on wall/ ceiling.

(14) Electronic Hum free EME Socket Type

Steps Fan Regulator

45 Providing and erecting ISI mark Medium 210.00 33.33 Mtrs.

class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling

erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution &

Clamps with following dia of pipes, in

approved manner as directed (b) 25 mm

46 Providing & erecting PVC Corrugated 45.00 21.21 Mtrs.

Flexible Conduit with required nos. of

coupling, PVC bushes, Check-nuts etc.

complete of following sizes. (2) 25 mm

47 Supplying and laying UPVC cable trunking 20.00 428.24 Mtrs.

system comprising unplasticised polyvinyl,

chloride rigid material with ignition free and

flame proof confirming BS with necessary

end caps Internal and external bend, flat

bends, coupler, tee etc..All necessary

accessories and measuring of following sizes

(2) 100 mm x 50 mm trunking

48 Providing and erecting Mains with 1.1 KV 558.00 104.03 Mtrs.

grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following

type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm

copper conductor FRLS PVC insulated

stranded wire of green colour for earth

continuity of following size (A) with medium

class Rigid PVC pipe and accessories (b)

wire 2.5 sq. mm

49 Providing and erecting Mains with 1.1 KV 280.00 226.24 Mtrs.

grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour

for earth continuity of following size (A) with

medium class Rigid PVC pipe and

accessories (g) 4 wire 4 sq. mm

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

50 Providing and erecting Mains with 1.1 KV 148.00 326.23 Mtrs.

grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour

for earth continuity of following size (A) with

medium class Rigid PVC pipe and

accessories (h) 4 wire 6 sq. mm

51 Providing and erecting Mains with ISI 90.00 115.14 Mtrs.

marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS

694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel,

relays, power switchgears, motor starters &

control wiring) with required size of copper

lugs, nuts and bolts if required. (f) One wire

52 Providing and erecting Mains with ISI 30.00 295.93 Mtrs.

marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS

694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel,

relays, power switchgears, motor starters &

control wiring) with required size of copper

lugs, nuts and bolts if required. (h) One wire

53 Supplying and erecting Flexible PVC 180.00 58.58 Mtrs.

insulated multi strand multi core 1.1 kv grade

ISI marked copper wires of following size to

be erected as directed. e) 1.50 Sq.mm

core round PVC sheathed

54 Replaced Old & U/S Computer Board by 10.00 1133.22 Nos.

Providing & erecting Switch board for

Computer or electric apparatus consisting of

following modular type accessories mounted

with PVC / Metallic concealed/open box

with single mounting base frame covered

with textured/metallic /white front

plate,modules erected with necessary

connections as directed

1 no. 6A/16A universal plug-switch

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories.Cat-III

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

55 Supplying and erecting LED indoor fittings 250.00 295.93 Nos.

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K, Luminaire efficacy>

85 lumens/watt ,LED LED driver efficiency >

85 % ( fitting required LM-79 & LM-80

Certificates) (NOTE: Below description have

shown ranges of Wattage capacity of LED

any wattage capacity between the ranges

shown.) (A) Tube Light with integral/ non-

integral driver. (iii) 18-20 Watts, Surge - 2kV,

IP-20, conventional 4 feet Cat III

56 Supplying and erecting led lamps with 60.00 112.11 Nos.

following wattage capacity of 220 to

voltage, minimum 15000 burning hours life,

500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 /

B22 lamp holders, pf >= 0.5 (A) LED Lamps

integral type, with PC diffuser suitable LAMP

holder (ii) 5 to 8 watts Cat-III

57 Supplying and erecting LED street light / 25.00 2843.15 Nos.

Flood light fittings with High power White

LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 &

LM-80 certificates)(NOTE: Below description

have shown ranges of Wattage capacity of

LED fittings. The Engineer incharge may

ranges shown.) (A) Street Light (IP-65),

Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-

voltage protection. (i) 36 - 47 watts Cat-III

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

58 Supplying and erecting LED street light / 4.00 6177.16 Nos.

Flood light fittings with High power White

LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 &

LM-80 certificates)(NOTE: Below description

have shown ranges of Wattage capacity of

LED fittings. The Engineer incharge may

ranges shown.) (B) Flood Light (IP-65),

Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-

voltage protection. (iv) 90 - 119 watts Cat-III

59 Providing and erecting Approved make Four 4.00 8861.74 Nos.

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V.

having normal current rating 125A. with

Fixed thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III

60 Providing and erecting Miniature circuit 29.00 297.95 Nos.

breaker single pole 0.5A to 2A system and

having breaking capacity 10 KA to be

erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

61 Providing and erecting Miniature circuit 30.00 123.22 Nos.

breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with

ISI Mark Cat-III

62 Providing & erecting 240 V MCB double pole 48.00 362.59 Nos.

switch for lighting Load (B Curve) having

KA breaking capacity & confirms to IS :

in existing box having following capacity (B)

40 Amp. Cat-III

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

63 Providing & erecting 415 V MCB Four Pole 24.00 811.03 Nos.

for Motor & Inductive Load (C Curve) having

10KA breaking capacity & confirms to IS

:8828 in existing box having following

capacity (C.) for 63 Amp. Cat-III

64 Providing and erecting Sheet Steel powder 4.00 6497.33 Nos.

coated Vertical MCB distribution board

(VTPN) - flush / surface mounted double

door (IP54) fitted with copper insulated

busbar, isolated neutral bar, earth bar and

DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3, suitable for 63/100 AMP TPN

MCCB + RCCB as incomer and three phase

outgoing as per following .(The DBs should

be used of same company of MCB to be

used) (B) 6 way outgoing

65 Providing and erecting Sheet Steel powder 4.00 2339.16 Nos.

coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to

house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to

be used) suitable for (B) three phase

incoming and single phase horizontal type

outgoing Per phase isolation type (PPI) (b)

sheet steel double door (i) 4 way

66 Providing and erecting Approved make 12.00 2458.34 Nos.

RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz.

having characteristic of quick action &

tripping with all advance feature & do not

incorporate any electronic component. for

following Max. rating erected as directed (iI)

40 Amps.DP Cat. III

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

67 Supplying & erecting earth pit of minimum bore 2.00 4591.46 Nos.

dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia

of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive

compound with high charge dissipation suitable

for following type of applications with chamber

and heavy duty cover. (A)(approved make OEM

has to submit test certificate including value of

earth resistance of installation duly stamped and

signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned

in test Certificate) & having back filling compound

of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be

capable to retain moisture for long time

Necessary test report must be submitted by

Agency. (a) For Electrical Installation up to 440V

in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

68 Providing , erecting , fabricating the M.S. 80.00 77.77 Kgs.

structure as per requirement on site

incorporating proper size of M.S.

angles,square,round, flats, bars, channels,

sections complete with cutting, welding,

grinding & finishing duly painted with one

coat of red oxide with erection on site as per

direction of engineer in charge with

necessary grouting, cementing, plastering &

finishing complete.

69 Providing and erecting XLPE (IS:7098)(I)-88 765.00 140.39 Mtrs.

ISI armoured cable multistrand / Solid

Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing

trench / pipe of following size of cables (A)

core 4 Sq. mm

70 Making trench in soft soil of suitable width of 580.00 55.55 Mtrs.

90 cm deep for laying cable or locating the

fault all over the run and back filling the

same and making the surface as normal

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

71 Making trench in Hard Murrum / Tar Road of 60.00 74.74 Mtrs.

suitable width of 90 cm or required depth for

laying any size of cable or locating the fault

all over the run and back filling the same and

making the surface as normal ground.

72 Making trench in Hard Murrum / Tar Road of 25.00 357.54 Mtrs.

suitable width of 90 cm or required depth for

laying any size of cable or locating the fault

all over the run and back filling the same and

making the surface as normal ground. (B) If

additional machinery like hammer driller or

JCB use [Add]

73 Providing and, fixing heavy duty flange type 58.00 33.33 Nos.

brass cable gland with rubber ring for PVC

insulated armoured cable complete with out

going tails, insulating tape etc for following

size of cables. (A) 2 to 4 core 2.5 / 4 Sq. mm

74 Providing and erecting Approved make 22.00 1596.81 Nos.

Ceiling fan with double ball bearing ISI mark

with condenser A.C. 23OV.50 c/s.1200 mm.

sweep complete, canopy erected on existing

hook or clamp with earthing. [Make shall be

approved by Engineer in charge]

75 Supplying and erecting 19 / 20 mm. nominal 10.00 108.07 Mtrs.

bore Medium Class M.S. Pipe down rod

erected duly painted for fan complete with

proper insulation without leckage and

76 Supplying & erecting single phase approved 12.00 2054.34 Nos.

make industrial exhaust fan suitable for

medium duty ring mounted low noise

operation suitable for medium duty having

following dia size and maximum speed in

RPM [A] 300-305 mm dia 900 RPM Cat-II

77 Rewinding of Any fan by using supper 90.00 401.98 Nos.

enamelled copper wire and over hauling and

putting in working order with original speed

with guarantee for one year including credit

of D.M. retained by Agency.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

78 Supplying & erecting approved make SMC 2.00 515.10 Nos.

press moulded composite FRP. loop-in, loop-

out approx. 2mm thick box complete with

Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per

requirement having locking arrangements

with mounting clamp with nuts, bolts &

washers suitable for erection on pole with

cable clamps& earth bolt of following size of

box. (b) 250mm x 200mm x 100mm [deep]

79 Supplying & erecting approved make SMC 29.00 476.72 Nos.

press moulded composite FRP. loop-in, loop-

out approx. 2mm thick box complete with

Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per

requirement having locking arrangements

with mounting clamp with nuts, bolts &

washers suitable for erection on pole with

cable clamps& earth bolt of following size of

box. (C)150mm x 125mm x 100mm [deep]

80 Supplying & erecting approved make Digital 2.00 3168.37 Nos.

time switch having lithium cell 6 years

operative and operate battery backup

channel day clock with 14 memory

programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum

switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF

switching. Programming switches & housed

in fire proof thermoplastic enclosure &

transparent cover erected as required with

necessary connection erected as directed.

81 Supplying & erecting power contactor ,AC3 2.00 2782.55 Nos.

duty for time switch complete erected as per

direction Cat III [D] 4 pole 440V 40 Amp.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

82 Providing and erecting water cooler having 2.00 54515.76 Nos.

storage capacity 80Ltr. & cooling capacity

Ltr.per hour @ an ambient temp of 45˚ C.

The outlet temp. of the water should drop by

15˚ C within a hour, The water cooler should

be comprising of hermetically sealed

compressor, fan motor, condensing unit,

water tank surrounded by evaporating coil,

thermostats, relay etc. complete with

necessary inlet & outlet connection. The

body of water cooler will be made from

Stainless Steel. and ISI Certified.

83 Supplying & erecting 5 stage single reverse 2.00 15620.66 Nos.

osmosis water purification system with M.S.

powder coated frame, prefilter housing with

'O' ring presediment filter GAC filter, carbon

filter suitable buster DC pump capacity

psi, mention with 40 psi inline type post

carbon filter auto low & high pressure

switches with following size of storage tank &

LPH capacity & erected as directed [B] 25 Ltr

/ Hr with 30 Ltr. Storage Tank

84 Providing & erecting open well horizontal 2.00 17279.08 Nos.

mono block pump set with cast iron body,

complete for three phase submersible motor

having [C] For 3 HP 3 phase open well

horizontal mono block pump set suitable for

85 LPM to 270 LPM @ 11 mtr to 33 mtr head

suitable for 50/65 mm dia delivery pipe

85 Supplying & erecting approved make motor 2.00 7722.46 Nos.

control cubical panel (Direct - on - line) made

from 16 G. CRCA sheet duly epoxy powder

painted inside and outside with hinged doors

and locking, arrangement consisting of

suitable size of ON- OFF isolator (AC -

3/23duty) main fuses, single phasing

preventer, indicating lamps for R- Y - B

phases, overload relay, Automatic water

level controller, Ammeter, Voltmeter each

duly socket crimped, main contactor &

overload relay, start - stop push buttons, to

be erected on angle iron frame grouted on

wall as directed. The isolator, overload relay

& contactors will be of L & T, Siemens or

BCH make only. (A) DOL up to 5.0 H.P.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

86 Providing and erecting ISI marked PVC 80.00 146.45 Mtrs.

insulated PVC Sheathed Flat flexible

Submersible copper cable approved make

of following Size. (C) 3 Core x 4 Sq. mm

Total Rs.

Rupees One Crore TwentyFive Lakh TwentySix Thousand TwentyFive and Paisa SeventyThree

I / We am / are willing to carry out the work at ________________________________% above / below

percent (should be written in figure and words) of the estimated rate mentioned above. Amount of my /

our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct_________% Below Add_________% Above

Net Rs.__________________ Net Rs.__________________

In words __________________ In words __________________

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in

R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned

in all the tender.

5 Dismentalling of Credit materials amounting of Rs. 6400.00 must be recovered from Contractor's

respective R.A. Bill.

Signature of Contractor

Deputy Executive Engineer Executive Engineer

R.& B. Sub Division R.& B. Division

Khedbrahma Himatnagar