REPLACEMENT OF PORTION OF BRICK MASONRY BOUNDARY WALL WITH RCC FRAMED BOUNDARY WALL (COLONY SIDE) AND CONSTRUCTION OF PATH FOR PATROLLING ON THE PERIPHERY OF THE COMPLEX AT 220 KV S/STN BBMB, DHULKOTE

Amount

Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m (Pb CSR Ref No. 6.19) (L/R)

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) (Pb. C.S.R. Ref. No.9.1)

Centering and shuttering for columns (Square or rectangular or polygonal in plain) (Pb. C.S.R. Ref. No.9.4)

Centring and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttersses etc. (Pb. C.S.R. Ref. No. 9.2)

Drilling holes in girders (Pb. C.S.R. Ref. No. 26.2 )

Applying priming coat with metal primer on new steel or iron work including preparation of surface. (Pb. C.S.R. Ref. No. 16.20 (T/R)

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. (Pb. C.S.R. Ref. No. 16.17) (T/R)

Welding by gas or by electric plant, including carriage to and from workshop. (Pb. C.S.R. Ref. No. 18.28 )

Fibre Board Expansion Joints (a) Providing and fixing 25mm thick compressible fibre board in expansion joints complete as per drawings and technical clause 2605 of MORT&H specifications (Pb. C.S.R. Ref. No. 24.61 a T/R )

Dismantling barbed wire or flexible wire rope In fencing including making rolls and stacking within 50 metres lead . Ref (Pb. C.S.R. 8.45 )

Dismantling brick work tile masonry or tile lining. (b) In cement. (Pb. C.S.R. Ref. No. 8.5 (b) (L/R)

Scraping :-Bricks dismantled from brick work in lime or cement Ref (8.31e) L/R

Carriage charges :- Carriage of malba Distance 15 KMs: Earth, Surkhi, Sand, Earth, Fly Ash, Bajri, Ballast, Stone Boulders, Kankar and Building Rubbish, Earth (Pb. CSR Ref. No.5.2 (i ) (L/R)

Carriage charges :Carriage charges M.S. Bars, Steel, Coal, Lime, GI pipes and specials, CI manhole covers, steps and other castings and ancillary miscellaneous items like lead, hemp yarn etc. (Pb. CSR Ref. No. 5.2(iv) Distance 2 km

Loading and un loading charges By manual means (A) Stone (building or pitching) Sand, Earth, Fly ash, bazri Shingle, Spalls, brick bats, Brick Ballast and stone metal. (Pb.C.S.R.Ref.No.4.1(A)

Loading and un loading charges By manual means MS bars structural steel GI pipes and specials CI Manhole cover steps and other casting and other ancillary items like lead hamp yarn etc including stacking Ref (4.9)

Removal of wild growth along the boundary wall Both sides Jungle clearance Ref (Pb. C.S.R 26.23 )

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres .Ref Pb. C.S.R (6.6)

Breaking ballast from brick bats (including stacking) 40mm. M-10

Joint Sealing Compound (b) Providing and filling joint sealing compound withn coarse sand and 6 percent bitumen by weight complete as per drawings and technical clause 2605 of MORT&H specifications Ref (Pb. C.S.R (24.61 (b) T/R depth of joint 7.5 cm

Cement concrete 1:6:12 (a) With brick ballast 40mm gauge (i) mixing by manual means Ref 10.8 (a) (i) T/R

Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded Ref Pb. C.S.R (10.26 T/R

Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels. Ref Pb. C.S.R(9.6)

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. Ref Pb. C.S.R( 9.8)

Cement concrete 1:2:4 (a) With stone ballast or shingle (i) mixing by manual means Ref Pb. C.S.R (10.13 a (i)) T/R

Providing and fixing 14 gauge MS sheet garage doors with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates including locking arrangement with handles etc. complete in respects Ref Pb. C.S.R( 18.10) T/R

Supplying open able steel windows, of standard rolled steel Z sections, joints mitered and Electrically flash-welded, with iron fittings including necessary iron handles, Peg-stay catchers bolts, iron plugs and pressed steel projected hinges and glazing clips, complete (Excluding glazing ) and finished with two coats of ready mixed paint red lead non setting primer Ref Pb. C.S.R (18.20 a) T/R (a) Upto 1 sqm area

Supplying open able steel windows, of standard rolled steel Z sections, joints mitered and Electrically flash-welded, with iron fittings including necessary iron handles, Peg-stay catchers bolts, iron plugs and pressed steel projected hinges and glazing clips, complete (Excluding glazing ) and finished with two coats of ready mixed paint red lead non setting primer Ref Pb. C.S.R (18.20 b) (b)above 1 sqm area

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. Ref Pb. C.S.R (18.25 b) T/R Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area-

Extra for providing & fixing Steel beading of approved shape steel tube beading size 12mm X 12mm, 18 gauge of approved shape and section with screw for fixing of glass panes instead of glazing clips and metal slash putty in steel doors , windows & Ventilators complete in all respect Ref Pb. C.S.R( 18.26) T/R

Providing & Fixing of 10 gauge welded mesh of 25mm x 25mm size fixed on steel glazing with MS flat 20mm x 6mm beeding complete in all respect including painting two coats with Synthetic Enamel Paint and Priming Coat Ref Pb. C.S.R (18.31) T/R

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position Ref Pb. C.S.R (18.4) T/R

Screed of 50mm thick cement concrete 1:8:6 with stone aggregate be laid below the topping using mechanical mixer for mixing of material Ref Pb. C.S.R( 14.11) T/R

Conglomerate floor 40mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material Ref Pb. C.S.R (14.6) T/R

Striking joints in lime or cement on brick walls Ref Pb. C.S.R (15.65) T/R

Terracing consisting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing Ref Pb. C.S.R (13.13) (i)T/R

Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 Ref Pb. C.S.R (13.45) T/R

Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm cement concret 1:8:16 including 12.5mm thick cement plaster 1:3 Ref Pb. C.S.R (13.51 ) T/R

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. Ref Pb. C.S.R (13.55) T/R

Providing and fixing cast iron 100mm dia rain water pipe with screw and wooden plugs fixed and wall face including filling joints with spun yarn and cement mortar 1:2 excluding head and shoes etc Ref Pb. C.S.R (13.41) T/R

Providing and fixing cast iron head for rain water pipe on wooden plugs fixed on wall face including filling the joints with spun yarn and cement mortar 1:2 Ref Pb. C.S.R( 13.42) T/R

Providing and fixing cast iron shoe for rain water pipe on wooden plugs fixed on wall face including filling the joints with spun yarn and cement mortar 1:2 Ref Pb. C.S.R (13.43) T/R

Providing & fixing glass strips 3mm thick in floor (a) 40mm wide Ref Pb. C.S.R (14.104 a) T/R

Carriage charges:- Bricks (22.86 cm x 11.11cm x 6.83cm) (Ref Pb. C.S.R (5.2(vi)) L/R Distance = 2 km

Loading & unloading by manual means .(Ref Pb. C.S.R( 4.3) Bricks 22.86 cm. size (including stacking)

Cement concrete 1:5:10 with stone aggregate 40 mm gauge mixing by mechanical means using concrete mix volume type (T/R) NS item

Reinforced cement concrete M-20 mechanically batch mixed using batch type Concrete mixer as per IS: 1791 and vibrated by needle vibrator but excluding steel Reinforcement centring and shuttering in foundation and plinth. T/R) NS item

Reinforced cement concrete M-20 mechanically batch mixed using batch type Concrete mixer as per IS: 1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. (T/R) NS item

Cold twisted deformed (Ribbed/ Tor Steel ) Bars (Fe -500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of R.C.C. including bending and binding placing in position complete (T/R) NS item

Providing & fixing concertina coil fencing with punched Tape concertina coil 600 mm dia. 10 meters open able length (total length 90 m) having 50 Nos. rounds per 6.00 meters length up to 3.00 meters height of wall with existing angle iron Y-shaped placed 2.4 m or3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, studtied with G.I .staples & G.I .clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete ,as per directions of the E.I.C. with reinforced barbed tape (RBT)/spring core (2.5 mm thick) wire of high tensile strength of 165 Kg./sq.mm with tape (0.52 mm thick) and weight 43.478 gm./meter T/R NS item

Steel work, fixed independently without connecting plates, including cutting, hoisting and fixing in position:-Tees, angles and channels.(T/R) NS item

115 mm thick brick work cement sand mortar 1:5 without reinforcement in superstructure (without bricks) (T/R) NS item

1st class burnt brickwork laid in cement sand mortar 1:5 in 1st storey up to 4 mm above plinth level (without bricks) T/R NS item

12.5 mm thick cement plaster 1:5 (T/R ) NS item

Cement concrete 1:5:10 with brick ballast 40mm gauge mixing by mechanical means using concrete mixer volumetric type ( without Brick ballast) (T/R) NS item

Cement concrete 1:2:4 With stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type (T/R) NS item

First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth ( without bricks) ( T/R) NS item

Providing and fixing M.S. angle iron 40x40x6mm chowkhat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect (T/R) For single rebate.NS item

Bidder Name

Amount in Words

Chirakshi Construction Co. (BID ID -918726)

SUBHASH CHAND (BID ID -919047)

NARENDER SINGH CONTRACTOR (BID ID -918297)

RAJIV (BID ID -919404)

NARENDER SINGH CONTRACTOR (BID ID -918297)

SUBHASH CHAND (BID ID -919047)

Chirakshi Construction Co. (BID ID -918726)