SPECIAL REPAIR TO BLDG NO. TNC-26, TNC-27, TNC-28 AND T-298 AND PROVN OF TOILET WITH HEATING FACILITIES FOR JCOS ORS AT OFFICE COMPLEX AND PROVN OF SHELTER FOR INSTALLATION OF OXYGEN GENERATOR SYSTEM AT FSC RAMPUR AT URI AND RAMPUR UNDER GE 969

Amount

Dismantling wall and ceilling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, cover fillets etc complete all as specified and directed by engineer-in-charge.

Dismantling of timber scantling 40 Sqcm and over in section in any position in unframed work complete all as specified and directed by engineer-in-charge.

M&L wooden wall panelling and ceiling with tongue and groove joint laiminted over high quality DHF 8-10mm thick complete all as specified and directed by engineer-in-charge.

M&L for second class soft wood (Kail) clean swan timber fixed in scantling complete all as specified and directed by engineer-in-charge.

All as per Ser item No 4 above but except timber complete all as specified and directed by engineer-in-charge. (Note : Serviceable timber obtained from ser item No 02 above to be used).

Dismantiling of timber fillets rails, posts rafter purlins etc under 40 Sqcm in section in any position in framed work complete all as specified and directed by engineer-in-charge.

S&F second class hardwood plain fillets square, rectangular in section exc 13 Sqcm & not exc 25 Sqcm complete all as specified and directed by engineer-in-charge.

S&F second class hardwood plain fillets square, rectangular in section exc 6 Sqcm and not exc 13 Sqcm complete all as specified and directed by engineer-in-charge.

Dismantling of boarding any description fixed in any position with nails complete all as specified and directed by engineer-in-charge.

M&L, for weather boarding of 2nd class softwood, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps complete all as specified and directed by engineer-in-charge.

All as per Ser item No 10 above but except boarding complete all as specified and directed by engineer-in-charge. (Note : Serviceable boarding obtained from ser item No 9 here-in-before to be used).

S&F facia boarding of 2nd class soft wood planed one side with but joints 20mm thick and champhered one side and the boarding is to bematched complete all as specified and directed by engineer-in-charge.

M&L for 18/19mm thick block boards, grade 2 quality,interior grade, decorative type with decorative face veneer on both face, complete all as specified and directed by engineer-in-charge.

Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed by engineer-in-charge.

Taking down chowkats with shutters (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm eachcomplete all as specified and directed by engineer-in-charge.

Taking down chowkats with shutters (without taking off shutters from the frame) n. exc 1.5 sqm complete all as specified and directed by engineer-in-charge.

Supply and fixing for aluminium alloy (powder-coated) door frame and shutters with hollow aluminium anodized sections as specified including aluminium alloy anodized snap type beads, dish type door handles, glazed clip joint cleats, rubber gasket, dead lock 4 levers, two numbers of aluminium alloy anodized tower bolts to each leaf etc. including fixing frame to wall/RCC members with rawl plugs complete. Sections of doors shall be aluminium hollow sections as follows : - (a) Door Frame single groove 101.6mmx44.45mmx2.15mm thick (b) Shutter top 47.62mmx44.45mmx1.95mm thick. (c) Shutter bottom 114.30mmx44.45mmx2.15mm thick (d) Shutter vertical 85mmx44.45mmx1.80mm thick (e) Shutter middle 83.5mmx44.45mmx2.40mm thick (f) Gauging clip weighing not less than 0.097kg/metre (Note : 1. The rates shall be inclusive of provision of and fixing of rubber packing/gasket. and Glass pane shall be measured and paid separately.) .Manufacturersof section : M/S Indian Aluminium Co. Ltd., UCO Bldg, New Delhi. M/S Jindal Aluminium Pvt. Ltd. M/S Hindalco Pvt. Ltd. or any other equivalent approved by GE.

S&F aluminium alloy (powder-coated) window frame with double leaf and double shutter (both gauged and glazed shutter in same frame ) open able type, with aluminium sections as per of “Jindal” section numbers for casement windows with double shutters including aluminium alloy anodized snap type beads, handles, aluminium anodized barrel tower bolts and glazing clip, joint cleats, rubber gaskets etc., complete all as specified for series-B “ Jindal” section numbers for casement (a)Frame of section 101.6mmx44.45mmx2.10mm thick and section for shutter 47.62x44.45x1.95 mm thick (b) Mullion 53mmx52mmx 2mm thick not less than 1.065 kg/mtr. (c) Glazing clip weighing 0.259kg/mtr. (d) Windows shall be provided with 02 Nos. of tower bolt for single leaf and 03 Nos. of tower bolts for double leaf. Tower bolts shall be aluminium alloy anodized weighing 0.302kg/mtr. Handles shall be aluminium anodized ‘D’ type handle of size 98mm and thickness 2.37mm weighing 0.875kg/mtr and one no per each open able leaf shall be provided. (Note : 1. The rates shall be inclusive of provision of and fixing of rubber packing/gasket. Glass pane and wire gauge shall be measured and paid for separately. Manufacturers : M/S Indian Aluminium Co. Ltd., UCO Bldg, New Delhi. M/S Jindal Aluminium Pvt. Ltd. M/S Hindalco Pvt. Ltd. or any other equivalent approved by GE.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed by engineer-in-charge.

S & F second class soft wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

S & F 35 mm thick second class soft wood plain, framed, panelled shutters (any number of panels), with panels of veneered particle board or plywood or bison board complete all as specified and directed by engineer-in-charge.

S & F 30 mm thick second class soft wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. for wiondows and ventilators

S & F wood grain/printed Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by engineer-in-charge.

S & F wood grain/printed Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by engineer-in-charge.

S&F Sheet glass 5.5mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.50Sqm in each pane, complete all as specified and directed by engineer-in-charge.

S&F 100mm size MS butt hinges medium weight cold rolled complete all as specified and directed by engineer-in-charge.

S&F 75mm size MS butt hinges medium weight cold rolled complete all as specified and directed by engineer-in-charge.

S&F 150mm length aluminium anodised barrel tower bolts of extruded sectioncomplete all as specified and directed by engineer-in-charge.

S&F 100mm length aluminium anodised barrel tower bolts of extruded sectioncomplete all as specified and directed by engineer-in-charge.

S&F 150mm length aluminium anodised handle cast type complete all as specified and directed by engineer-in-charge.

S&F 75mm length aluminium anodised handle cast type complete all as specified and directed by engineer-in-charge.

S&F 150 mm long MS barrel tower bolts stove enameled black with bright bolt complete all as specified and directed by engineer-in-charge.

S&F 250mm long MS sliding door bolt with hasp, staple (bolt type)and fixing clips of sheet,and fixing bolts and sliding bolts of stove enameled black including necessary nut and bolts complete all as specified and directed by engineer-in-charge.

S&F 125mm long MS pressed handle ovel type, stove enamelled complete all as specified and directed by engineer-in-charge.

S&F 150mm long MS pressed handle ovel type, stove enamelled complete all as specified and directed by engineer-in-charge.

S&F 4 mm thick Figured glass,pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed by engineer-in-charge.

S&F 250mm long aluminium alloy, anodised, sliding door bolts plate type stove enameled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staplecomplete all as specified and directed by engineer-in-charge.

S&F aluminium extruded section body door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851mm to 1000 mm in width and of weight between 61 to 80 kg and fixed, including taking down old and removal, complete all as specified and directed.

M&L for demolition of brick or stone masonary works built cement mortar complete all as specified and directed by engineer-in-charge.

Taking down cement plaster on brick or stone walls etc incl raking out joints, hacking for key screbbing down with water etc complete all as specified and directed by engineer-in-charge.

M & L Sand filling under floors or in foundations including watering and consolidations complete all as specified and directed by engineer-in-charge.

M& L for PCC (1:4:8) type D2 with 40 mm graded aggregate as in mass concrete complete all as specified and directed by engineer-in-charge.

M & L 40mm thick Damp proof course in cement concrete 1:2:4, type B-0 to horizontal or vertical surfaces including necessary formwork complete all as specified and directed by engineer-in-charge.

M&L for Brick work with sub class B bricks , staight or curved on plan to any radius built in 1:4 CM complete all as specified and directed by engineer-in-charge.

M & L brick work with sub class 'B' brick straight of curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by engineer-in-charge.

M&L for RCC 1:2:4 type B1(20mm graded agg) as in plinth band/lintel band , bressummers, complete all as specified and directed by engineer-in-charge.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed by engineer-in-charge.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed by engineer-in-charge.

Rendering 15mm thick cement plaster on fair faces of brick works or concrete surfaces of 1:4 CM to be finihsed even and smooth without using extra cement complete all as specified and directed by engineer-in-charge.

Supply only integral water proofing compound complete all as specified and directed by engineer-in-charge.

M&L for demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below or above ground level) and removal from site complete all as specified and directed by engineer-in-charge.

Material and labour, 100 mm thick plain cement concrete (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in sub floors, finished even and fair to receive floor finishes,complete all as specified and directed by engineer-in-charge.

Material and labour, durastone heavey duty outdoor/parking tile 300mmx300mmx10mm thick, of SOMANY of equivalent machine pressed, different colours glossy finished, set jointed and pointed in neat cement slurry @ 3Kg/Sqm, in floors over and including 15mm thick screed bed in CM (1:6) and pointed with grey cement mixed with pigment to match the shade of tiles, complete all as specified and directed by engineer-in-charge.

Dismantling floor hearth or wall tiling incld cement mortar, bedding (but not backing), removing serviceable tiles to store and rubbish of the premises complete all as spd & directed

M&L for non-skid coloured ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18sqm, in floors etc, set jointed in neat grey cement slurry @ 3Kg/Sqm and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed by engineer-in-charge.

M&L for double charge Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc, set jointed in neat grey cement slurry @ 3Kg/Sqm and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6), complete all as specified and as directed

M & L Vitrified double charge ceramic tiles 10mm thick(square or rectangular) polished light shade/double charged/ultracharged, area of each tiles exc 0.36 sqm but not exc 0.42sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bedding layer of cement mortar in CM 1:6 complete all as specified and directed by engineer-in-charge.

S & F first quality glazed designer pattern coloured ceramic tiles of size 450mmx300mmx7mm thick fixed in pattern to wall (combination of dark & light colour with border) as in skirting, dado, set and jointed in neat cement slurry, over and including 10 mm thick rendering of cement mortar (1:4), including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed by engineer-in-charge.

Demolition of Reinforced cement concrete in roofs, floors (other than ground floors), beams , staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) complete as all specified and directed.

M&L for RCC M-20 type A-1 (1:1.5:3) using 20 mm graded stone aggregate as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies , deck slabs and in shelves and the like complete all as specified and directed by engineer-in-charge.

Use & waste of Formwork to rough finished flat surface of concrete to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (Horizontal or sloping) complete all as specified and directed by engineer-in-charge.

M&L of mild steel TMT Bars 6mm to 8 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends binding with and including mild steel wire (annealed) not less than 0.9 mm dia securing with clips complete all as specified and directed by engineer-in-charge.

M & L Granite (of any type)18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishingcomplete all as specified and directed by engineer-in-charge.

M&L 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and directed by engineer-in-charge.

Dismantling of plain/corrugated steel sheeting, any gauge or thickness including Nainital or similar pattern roof covering complete all as specified and directed by engineer-in-charge.

S & F mild steel works as in bands, straps, supports or stays for rainwater, ventilating pipes incl bolts if required, hooks, hasp and staple, clamps, hold fasts , wall ties, hooks for hanging fans, plain angle cleats etc and similar works

S & F rolled mild steel in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting platesand similar works and fixing complete Fe-410W (Gde E 250 quality A) for ceiling members etc or similar works complete all as specified and directed by engineer-in-charge.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of GE 410 (Gde-E-250 quality-A)complete all as specified and directed by engineer-in-charge.

M&L Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws,complete all as specified and directed by engineer-in-charge.

S & F Pre painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of colour having tensile stength of 550Mpa as in roof coverings/cladding to wall, fixed with self tapping screws complete all as specified and directed by engineer-in-charge.

S & F Anodised aluminium snap grid frame work for false ceiling complete all as specified and directed by engineer-in-charge.

M & L 12mm thick Perforated particle boards or tiles for insulation and accoustic purposes, 60cm x 60cm in sizecomplete all as specified and directed by engineer-in-charge.

M&L Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws,all as specified.

S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'L' type or `J' type or cranked hook bolts etc including bitumen washer in roofs, with 275 grams/sqm zinc coatingcomplete all as specified and directed by engineer-in-charge.

S&F 0.80mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing etc with grade of zinc coating 275 complete all as specified and directed by engineer-in-charge.

All as per ser item No 76 above but except sheeting. (Note : Serviceable sheets obtained from ser item No 45 above to be used).

S&F mild steel plates, wind ties for roof incl securing bolts and work confiring to Fe-290 Gde E-165 complete all as specified and directed by engineer-in-charge.

S&F in repairs steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors of 15mm bore complete all as specified and directed by engineer-in-charge.

S&F Vitreous china sqatting pan 'Orrisa' pattern 580x440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) complete all as specified and directed by engineer-in-charge.

S&F PVC valveless,10 liters syphonic action cistern, low level, white, with inlet, ball valve, float and including brakets and connection to pipes complete all as specified and directed by engineer-in-charge.

S&F vitreous China Wash Basin white, flat back size 550x400 mm including bracket, waste coupling, waste pipe complete all as specified and directed by engineer-in-charge.

S & F Vitreous china urinal, Half Stall type flat back white (minimum), with grating and union for discharge pipe complete all as specified and directed by engineer-in-charge.

S&F towel rail 450mm long of PTMT fixed with and including choromium plated brass screw and wooden/ plastic cleats (minmum weight 170 gms) complete all as specified and directed by engineer-in-charge.

S & F in repair Vitreous china wash down water closet pan, flushing cistern including seat cover Make Jaquar Cat Part No VGS-WHT-0207 or equivalent in Cera, Hindware.complete all as specified and directed.

S&F in repair vanity stainless steel size ( 80x45x50)cm, minimum wt not less than 25 Kg, vitreous china wash basin bowl with stainless steel cabinet with two handle and two shelf with fancy mirror including fixing on wall and 15mm bore cast copper aloy CP piller tap fancy type and waste fitting brass chromium plated with long shank and fly nuts of size 32mm dia including brass chromium plated bottle traps 32mm bore with inlet and outlet screwed for pipe and connections incl necessary packing union and cap complete all as specified and directed by engineer-in-charge.

S&F in repair 15mm bib tab fancy type long nose cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for pipe or for brass ferrule and fixed. Make:- Jaquar, Cat Part No QQT-7037 or equavlent in Hindware , Cera.complete all as specified and directed by engineer-in-charge.

S&F in repairs angle cock 15mm CP cast copper screwed dowen for iron pipe Make:- Jaquar, Cat Part No QQT-7053 or equivalent in Cera, Hindware complete all as specified and directed by engineer-in-charge.

S&F in repairs 600mm long PVC connection Make : Jaquar Cat Part No ALD-801B or equivalent in Cera, Hindware.complete all as specified and directed.

S&F in repair Brass wash hand basin Mixer mixing hot & cold water screwed down for iron pipe and fixed Make:- Jaquar, Cat Part No QQT-7167B or equivalent in Cera, Hindware.complete all as specified and directed.

S&F in repair Brass CP mixer for mixing for mixing hot & cold water screwed down for iron pipe with arrangment of telephonic shower Make:- Jaquar, Cat Part No QQT-7271 or equivalent in Cera, Hindware.complete all as specified and directed.

S&F in repair brass chromium plated Soap Dish holder complete all as specified and directed . Jaquar , Cat Part No AKP35731P or equivalent in Cera, Hindware.complete all as specified and directed.

S&F in repair brass chromium plated Toilet paper holder complete all as specified and directed . Jaquar Cat Part No ACN-1151N or equivalent in Cera, Hindware.complete all as specified and directed.

S&F in repair brass chromium plated grab Bar 300mm long complete all as specified and directed . Cat Part No AKP-35701P or equivalent in Cera, Hindware.complete all as specified and directed.

S&F in repair brass chromium plated Tumbler holder complete all as specified and directed . Cat Part No ACN-1141N or equivalent in Cera, Hindware.complete all as specified and directed.

S&F in repair brass chromium plated Double hook complete all as specified and directed . Jaquar, Cat Part No AQN-7761P or equivalent in Cera, Hindware

S&F in repair brass chromium plated Towel Rack 600mm Long complete all as specified and directed . Jaquar ,Cat Part No CAN-1181N or equivalent in Cera, Hindware

S&F in repair brass chromium plated Glass Shelf 550mm Long complete all as specified and directed . Jaquar ,Cat Part No AKP-35771P or equivalent in Cera, Hindware.complete all as specified and directed.

S&F in repair brass chromium plated Glass corner glass shelf complete all as specified and directed . Jaquar ,Cat Part NoACN-1173 or equivalent in Cera, Hindware.complete all as specified and directed.

S&F in repair brass chromium plated hand shower @ 100mm round shape complete all as specified and directed . Jaquar , Cat Part No OHS-35497 or equivalent in Cera, Hindware.complete all as specified and directed.

S&F in repair 1.50M shower tubes for telephonic shower all as specified and directed . Jaquar, Cat Part No SHA-571 or equivalent in Cera, Hindware.complete all as specified and directed.

S&F in repair 1.50M shower arm all as specified and directed . Jaquar, Cat Part No SHA-457L200 or equivalent in Cera, Hindware.complete all as specified and directed.

S&F bottle trap of PTMT having minimum water seal of 25mm (minimum weight 32mm-32mm-260gms/40mm-270gms) including CP waste 32mm dia fixed as in repairs all as specified and completed

M&L for tubular towel/curtain rails 20mm dia of aluminium anodised ,incl brackets, side bulbs and other fixing accessories,complete all as specified and directed.

Material and labour, preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and directed.

Material and labour, preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed by engineer-in-charge.

Preparation of old painted surface of steel , not otherwise described over 10 cm width or grith two coat of synthetic enamel paint complete all as specified and directed by engineer-in-charge.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel over ,governing pivot made of brass,other parts made of mild steel complete all as specified and directed by engineer-in-charge. heavy duty and fixed complete all as specified and directed by engineer-in-charge.

Preparation of old painted surfaces of any descriptoin, not otherwise described, over 10cm witdth or girth and applying two coat of synthetic enamel paint on wooden surfaces complete all as specified and directed by engineer-in-charge.

M & L Preparing New surfaces of internal walls and applying two coats of distember oil emulsion over Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth., complete all as specified and directed by engineer-in-charge.

Preparation surfaces, plastered or unplastered new surfaces on wall and applying two coats of cement base pain complete all as specified and directed by engineer-in-charge.

Preparation surfaces, plastered or unplastered old surfaces on wall and applying two coats of cement base paint complete all as specified and directed by engineer-in-charge.

M&L for preparing newly plastered surfaces of walls and applying three coats white wash.

Surface dressing n.exc 15 cm deep in soft/loose soil complete all as specified and directed by engineer-in-charge.

Surface excavation n exc. 30cm deep and avg. 15cm deep and getting out soft/loose soil complete all as specified and directed by engineer-in-charge.

Excavation over area n. exc 1.5 mtr deep in any type of soil complete all as specified and directed by engineer-in-charge.

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m depth for foundation, etc, and get out in soft soil / loose soil complete all as specified and directed by engineer-in-charge.

Returns, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soils or hard/ Dense soil complete all as specified and directed by engineer-in-charge.

Remove Excavated soils exc 250m but not exc 500m and depositing where directed complete all as specified and directed by engineer-in-charge.

M&L for Hard core of guage exc 63mm but not exc 100mm, deposited, spared and levelled in layers n exc. 15 cm thick, watered and rolled / rammed complete all as specified and directed by engineer-in-charge.

M & L 25mm thick PCC 1:2:4 (Using 12.5mm graded stone aggregate ) as levelling course complete all as specified and directed by engineer-in-charge.

Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundation, filling, and mass concrete complete all as specified and directed by engineer-in-charge.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed by engineer-in-charge.

M&L for damp proof course to horizontal or vertical surface including necessary form work 40 mm thick in cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate complete all as specified and directed by engineer-in-charge.

M&L for mild steel TMT Bars 10mm dia and over, quality, cut to length, bent to shape required including cranking, bending and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by engineer-in-charge.

All as per item No. 127 before in here but 6mm to 8mm dia complete all as specified and directed by engineer-in-charge.

All as per item No.127 before in here but 5mm dia and over utp to 10mm dia in stirrups, spacers and binders complete all as specified and directed by engineer-in-charge.

Cement Concrete Type B0 1:2:4 (using 12.5 mm graded aggregate) in lintel up to 1.5m clear span, cills, steps, seismic and other similar bands, plinth course string courses, lacing courses parapets and railings up to 60cm in hight complete all as specified and directed by engineer-in-charge.

S&F PVC floor trap, 75 mm outlet plain with grating including jointing to wast pipe and fixed with solvent cement, cement concrete 1:2:4 B1 complete all as specified and directed by engineer-in-charge.

M&L for 75mm dia PVC (SWR) Pipe single socketed in any length with rubber joiunts fixed in walls complete all as specified and directed by engineer-in-charge.

M&L for 100mm dia PVC (SWR) Pipe single socketed in any length with rubber joiunts fixed in walls complete all as specified and directed by engineer-in-charge.

S&F 75 mm bore cast iron soil, waste and vent pipe single socketed in any length with rubber ring joints and fixed to wall complete all as specified and directed by engineer-in-charge.

S&F 100 mm bore cast iron soil, waste and vent pipe single socketed in any length with rubber ring joints and fixed to wall complete all as specified and directed by engineer-in-charge.

S&F 75 mm bore cast iron branch pieces single spigot and socket type with oval access door complete all as specified and directed by engineer-in-charge.

S&F 100 mm bore cast iron branch pieces single spigot and socket typewith oval access door complete all as specified and directed by engineer-in-charge.

S&F 75 mm bore cast iron ducks foot bends of any radius with oval access door complete all as specified and directed by engineer-in-charge.

S&F100 mm bore cast iron ducks foot bends of any radius with oval access door complete all as specified and directed by engineer-in-charge.

S&F PVC (SWR) 75mm dia vent cowl complete all as specified and directed by engineer-in-charge.

S&F PVC (SWR) 110/110 mm 'S' trap complete all as specified and directed by engineer-in-charge.

M&L for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltrs capacity all as specified in SSR Part I complete all as specified and directed by engineer-in-charge.

S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore dia of pipe complete all as specified and directed by engineer-in-charge.

S&F tube medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors of following sizes :-(a) 15mm bore of pipe

(b) 20mm bore of pipe

S&F stop valve cast copper alloy, screwed down with high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for sizes.(a) 15mm bore

(b) 20mm bore

S&F 15mm bore Bib taps, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron or brass ferrule and fixed but fency type.

S&F 15 mm dia pillar tap fancy type with capstan heads CP screwed down high pressure with or with out lettered 'Hot' or 'Cold' with long screw shank fly nuts screwed shanks and fly-nuts screwed for iron pipe and fixed.

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed by engineer-in-charge.

S&F 15mm dia angle stop valve of PTMT any colour high pressure screwed for for iron pipe and fixed complete all as specified and directed by engineer-in-charge.

S&F 32mm waste coupling of PTMT complete all as specified and directed by engineer-in-charge.

S & F Swivel shower of PTMT any colour for fixing with 15mm pipe.(min wt 40gms) complete all as specified and directed by engineer-in-charge.

Septic tanks, 30 users exc, in ordinary soil, foundation In PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc complete all as specified and directed by engineer-in-charge.

M&L for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes RCC/DWC complete filled with brick bats of size 2.4 M dia X 3.0 M effective depth complete all as specified and directed by engineer-in-charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.(a) One light point/fan point/Ex fan point controlled by one 5 Amps switch one way

(b) One 3 pin 5 Amp switch socket outlet on independent board

(c) One 3 pin 5 Amp switch socket outlet on same board with accessories

M & L for point wiring in non-metallic PVC casing & caping including all fitting with 2.5 Sq mm size multi stranded FRLS copper conductor cable including clamps, screws gutti /plug etc PVC unsheathed cable into and including wooden board/sheet steel box of 1.6mm thick with bakelite sheet 3mm thick and PVC insulated fire retardant cable of size 2.5 Sq mm as earth continuity conductor.

S & F in repair Modular type switch piano flush type 5 amps single pole one way complete all as specified and directed by engineer-in-charge.

S & F in repair Modular type scoket multipurpose 3/5 pin 5/6 amps flush typecomplete all as specified and directed by engineer-in-charge.

S & F in repair Modular type scoket multipurpose 3/5 pin 15 amps flush type complete all as specified and as directed. Make : Havells/Anchor/Plaza

S & F in repair Modular type switch piano flush type 15 amps single pole one way complete all as specified and directed by engineer-in-charge.

S & F in repair Bell switch, flush type single pole, one way 5 Amps complete all as specified and directed by engineer-in-charge.

S & F in repair Bell ding dong, 230 volts 50 HZ AC complete all as specified and directed by engineer-in-charge.

S7F1 X 18 Watt LED 6500K, white Octane LED Panel Round Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver complete all as specified and directed by engineer-in-charge.

Supply & Fixing 1 X 12 Watt LED 6500K, white Octane LED Panel Round Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver . Havells Cat Part No LHEBHDP7IZ1W012 and euivalent in Bajaj/CG/Wipro

S & F Ceiling rose surface bakelite surface 65x50 mm 3 trminals fixed on wall/ceiling and including PVC block. Make : Anchor /leader /Cona.

S & F House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos 90 bends. M.S. hook and stay or guy including taking down.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed inservice connections suspended by insulating hangers notmore than 1 metre apart including 4mm suspensionwire, one twin core cable flat or circular of size 10 sqmm including taking down.

Taking carefully ceiling fans by disconnectig electric connections, fan blades, etc put in safe custody for repair under relvant items of schedule Note:- The cost of required T & P, flat form lader shall be included in the quoted rates.

Repair and re-fixing, re-assembling the existing cealing fan in same original position along with cable after rectification of defects such as apply the one coat varinsh for windings, painting fan blades, changing fan bearning, rewinding of fan, write MES no on fan blades including nut, bolts and washers complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair ceiling fan step regulator, 120W - 2 module regulator electronic type 230 volts AC 50 HZ, 3.15 mfd complete all as specified and directed by Engr-in-Charge.

S & F in repairs MCB DB 8 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. (Make:- Schneider as per cat part- NBKRESNDD08 or equivalent in Havell's or Standard).

S & F in repairs MCB single pole of capacities 6 to 32 amp, 240 volts complete all as specified and as directeed.Make; Havells/C&S/Standard

S & F in repair MCB single pole & neutral of capacities 40 - 63 amp, 240 volts complete all as specified and as directeed. Make; Havells/C&S/Standard

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is ilnclusive of necessary earth work, as Excavation, RFR and removal etc complete all as specified and directed by engineer-in-charge.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

S&F in repair Non-metalic Ventilating Exhaust fan 150 mm sweep 230 volts, 900 rpm AC connecting up including provision of cable from ceiling rose/ connector to fan complete all as specified and as directed.

Supply and fix cob spot light complete all as specified and directed by Engr-incharge. Make; Havells/Bajaj/CG

Supply and fix Decorative wall light, gold finish fixture with cognac hammered glass diffuser suitable for 7.5 W LED filament lamp E 27 base complete all as specified and directed by Engr-incharge. Make; Havells/Bajaj/CG

Supply and fix Decorative gate light made up of high grade unbreakable polycarbonate material suitable for 20 W LED lamp B22 base. complete all as specified and directed by Engr-incharge. Make; Havells/Bajaj/CG

Supply and fix 2x2.5 sq. mm +1x1.5 sq. mm earth wire FRLSH complete all as specified and directed by Engr-incharge. Make; Havells/Polycab/Anchor

S&F Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, 240 V with 200 Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

S&F Switch socket combination 2 in1, 3 pin,5 and 15Amp flush type,universsal complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 22 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F LED Lamp 1x 15 W, 220V, 50Hz complete all as specified and directed by engineer-in-charge.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all ascomplete all as specified and directed by engineer-in-charge.

S&F switch piano Flush type, single pole, one way 5 amp 240 volts, complete all as complete all as specified and directed by engineer-in-charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed by engineer-in-charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor

Supply and fix DB 8 way for 200Amp rated Bus Bar complete all as specified and directed by engineer-in-charge.

Supply and fix MCB 6 -32 Amps complete all as specified and directed by engineer-in-charge.

M & L for fixing of single core 6 Sqmm FRLSH copper conductor cable PVC insulated , 1100 V 50Hz complete all as specified and directed by engineer-in-charge.

M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed by engineer-in-charge.

S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and directed by engineer-in-charge.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and directed by engineer-in-charge.

S&F Switch socket combination 2 in1, 3 pin,5 and 15Amp flush type,universsalcomplete all as specified and directed by engineer-in-charge.

S & F MCB, SPN 40 Amps 415 Volts C curve,complete all as specified and directed by engineer-in-charge.

S&F oil filled room heater fins type 2000watts complete all as complete all as specified and directed by engineer-in-charge.

S&F LED lights fitting 1x 22 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by engineer-in-charge.

S & F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and directed by engineer-in-charge.

Sand cushioning for under ground cable protection complete provided with layers 8cm thick before laying the cable in trenches and 15cm after laying the cable all as spfd.

Brick covering with common burnt sub class B covering laid dry flat transversally along the length of the cable over sand cushioning width equal to the length of brick complet all as specified and directed.

Supply & Laying XLPE insulated, screened , PVC bedded and PVC tape sheathed galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm, 4 core in trenches/along pole etc complete all as specified and directed. Note :-(i) Excavation and earth work, sand cushiong, brick cover shall be measured and paid separately under respective items

Supply and fix Voltage stabilizer for automatic operation, three phase naturally oil cooled indoor type & designed for input variation between 340 V to 460 V with output voltage stabilized at 415 with accuracy ± 2.5% and speed of correction 8 Volts per second and of capacity 15 KVA complete all as specified and directed by engineer-in-charge.

M/S Gh Qadir

m/s mohd rafiq lone

M/S GHULAM NABI LONE AND BROS