Repair of CHC building at Dhussara, Tehsil Amb Distt Una SH CO attached toilet with Doctor Duty room at CHC Dhussara Deposit Work

Dismantling of existing doors, windows and clerestory windows (Steel or wood) Shutter including Chowkhats, Architrave, holdfasts etc complete and other attachements etc. complete and stacking the material within 50 metres lead as per direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax.

Providing and fixing aluminium work for doors, windows, ventilators and partitions make of Hindco Co., Jindal India Aluminum Co. with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge for fixed portion (Powder coated aluminium (minimum thickness of powder coating 50 micron) (Glazing, paneling and dash fasteners to be paid for separately) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax.

Providing and fixing aluminium work for doors, windows, ventilators and partitions ake of Hindco Co., Jindal India Aluminum Co. with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete for shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately Powder coated aluminium (minimum thickness of powder coating 50 micron) as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax.

Providing and fixing glazing with float glass panes of 5 mm (five millimeter) thickness (weight not less than 12.50 kg/ sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item) as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax.

Providing and fixing 12mm (twelve milimeter) thick Phenol bonded pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 with decorative lamination on both sides Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax.

Providing and fixing anodised aluminium grill Hindalco, Jindal, Indian Aluminum Co. (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm( two hundred millimeter) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement (Only weight of grill to be measured for payment) as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level in all shapes and sizes in cement mortor 1:6 (one cement: six coarse sand) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level in any floor/height in cement mortor 1:4 (one cement: four coarse sand) as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax.

15mm (fifteen millimeter) Cement plaster on the rough side of single or half brick wall of mix cement mortor 1:4 (one cement: four coarse sand) upto all floor level as per CPWD specifications 2019 complete and direction by the Engineer in charge including entire carriage of materials within all leads and lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax.

Providing and laying Vitrified tiles 300x300 in floor with different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS:15622, of approved make Kazaria, Nitco, Somany, Orient Sell, RNK, Johanson & Johanson in all colours shade, over 12 mm thick bed of cement mortar 1:3 (one cement isto three coarse sand) including grouting of joints complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax.