Construction of Vijapadi Checkdam across Jamvali river near village Vijapadi of Taluka Savarkundla of District Amreli

BILL OF QUANTITIES

Amreli Irrigation Division, Amreli

Name of Work: Construction of Vijapadi Checkdam across Jamvali river near village Vijapadi

of Taluka Savarkundla of District Amreli in State

(A)Percentage Rate Tender (Upto INR 50 Cr.)

Item Description of Item(with brief specification and Quan Unit Rate In Amount

No reference to book of specifications) tity figures

1 Excavation of all sort of strata and formations including

depositing the unuseful excavated stuff as and where

directed including sorting and stacking useful material

as required and upto lead of 200m. And all lifts etc.

Complete, including dewatering.

(a) In over burden including H.M. 109.14 Cum 79.00

(b) In soft Rock. 218.29 Cum 176.00

(c) In Hard Rock. 764.01 Cum 590.00

2 Drilling 25mm dia holes at distance as specified and

depth upto 3.0mt for check dam foundation & fixing

anchor bars of specified diameter with cement grout incl 78.00 Rmt 252.00

cleaning holes as directed etc. (excluding cost of bars)

3 Prov. & Laying in position cement concrete using

cement, sand and crushed metal coarse aggregate by

mass and machine mix for PCC/RCC including necessary

formworks compaction by vibrator, curing as directed

with all lead & lift etc complete. (Excluding cost of steel) 62.00 Cum 3465.00

FOR. BODY WALL, APRON, TRAINING WALL, SIDE

WALL, SPLAY WALL, KEY WALL, CUT OF WALL ETC

4/E) "NOMINAL MIX" Conc. grade 1:2:4 and MSA-40mm

4 Prov. & Laying in position cement concrete using

cement, sand and crushed metal coarse aggregate by

mass and machine mix for PCC/RCC including necessary

formworks compaction by vibrator, curing as directed

with all lead & lift etc complete. (Excluding cost of steel) 979.93 Cum 3423.00

FOR. BODY WALL, APRON, TRAINING WALL, SIDE

WALL, SPLAY WALL, KEY WALL, CUT OF WALL ETC.

4/C) Controlled Concrete grade M-15 and MSA-40mm

5 Providing, cutting, bending, binding and fixing in

position as per drawing TMT BAR, reinforcement for

R.C.C. works and anchor bars incl cost of black annealed 8.86 M.T. 76574.00

16 to 18 BWG M.S. Wire etc. complete with all lead and

lift. (B) Fe-500

6 Providing and fixing in position 100/110 mm dia PVC

Pipe weep holes in the retaining walls/sidewall /abt etc 27.12 Rmt 358.00

7 Providing and laying graded filters of and, gravel/metal

and over size metal (100 to 150 mm) behind the

retaining wall & wing walls as directed as per approved 32.58 Cum 530.00

drawing with all lead and lifts etc complete.

8 Providing and laying dry rubble pitching with 20 cms 106.08 Sqmt 723.00

gravel/metal and 20 cms sand layers as base of inverted

graded filter and without header stone but incl.hand

packing trimming & dressing of slopes etc complete.

b) 45 cms thick stone pitching

9 Back filling with appropriate excavated material behind

the structures or refilling the trenches with excavated 116.45 Cum 84.00

useful material including watering ramming,

consolidation etc complete with all lead and lift.

10 Providing and fixing in position white marble plate of

size 45x45x1.8 cm incl ingraving the letters as per 1.00 No 1350.00

drawing/as directed etc complete.

11 Providing Photography and Videography of Entire Work. 1.00 Job 500.00

I/We am/are willing to carryout the work at…....................... %above/below percent (Should

be written in figures and words)of the estimated rate mentioned above. Amount of my/our

tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………%below Add………%Above

In words In words

(B)For Item Rate Tender (For above INR 50Cr.):

Item Description of Item Quantity Unit Rate Amount

No (with brief specification

and reference to book of In In

specifications) figures Words

(A)Total Tendered Amount

(B)Rebate on above tendered amount(If any)%(in figure)………………………………

(C)Net Tendered Amount(A-B)(in figure)………………………………

1 The Contractor shall exhibit a board with detailed specification and details of work as

directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deductedasperprevailingrulesi.e.1%ofthework done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R. NO.: MIS102010/17/K1 Dated:30/07/2018 as stated in S.O.R. therefore in

R.C.C. items where there is a change as per actual mix design the cost of difference of

cement consumption have been deducted from the rate of original item at the rate of

input rate mentioned in all the tender