Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹3.2 LAccepted-AOC | ₹3.2 L | 1 | Accepted-AOC lowest |
| 2 | 2₹3.2 LRejected-Finance | ₹3.2 L | 2 | Rejected-Finance highest |
| Sl No | Description | Qty | Unit | Jithin Sunny L1 | PRADEEP R L2 |
|---|---|---|---|---|---|
| 1.00MTC | |||||
| 1.00 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 15 | sqm | 404.89 ₹6,073.35 Lowest | 408.58 ₹6,128.7 |
| 1.00 | 13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work | 207.6 | sqm | 124.76 ₹25,900.18 Lowest | 125.9 ₹26,136.84 |
| 1.00 | 13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work | 35.44 | sqm | 118.86 ₹4,212.16 Lowest | 119.95 ₹4,250.79 |
| 1.00 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 15 | kilogram | 127.78 ₹1,916.7 Lowest | 128.94 ₹1,934.1 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 86.88 | kg | 212.73 ₹18,481.98 Lowest | 214.67 ₹18,650.53 |
| 1.01 | OD38523/2026-2027:Providing and fixing Powder coated Mild steel T ceiling section 15x42x0.40 mm | 20 | kg | 175.74 ₹3,514.8 Lowest | 177.34 ₹3,546.8 |
| 1.01 | OD38524/2026-2027:Providing and fixing Aluminium composite panel fixing false ceiling works of thickness 3mm of Standard sizes include 8ft x 4ft (2440mm x 1220mm), 10ft x 4ft, and 12ft x 4ft. including all fittings | 66.54 | sqm | 2,778.79 ₹1,84,900.69 Lowest | 2,804.17 ₹1,86,589.47 |
| 1.01 | 9.117.1:Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-chargeExtruded section profile size 48x40 mm | 19.2 | metre | 319.3 ₹6,130.56 Lowest | 322.22 ₹6,186.62 |
| 1.01 | 9.120.1:Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and sized of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of whicj 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5mm thick, 95 mm wide PVC sheet out of which75 mm shall be tapered in 45 degree on th inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mmx2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded /sealed to the styles & rails with 7 mm (5 mm + 2 mm ) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer -in-charge, manufacture's specification & drawing.30 mm thick plain PVC door shutters | 7.56 | sqm | 3,371.22 ₹25,486.42 Lowest | 3,402.01 ₹25,719.2 |
Tender Value
₹2.9 L
EMD Value
₹7,345
Closing Date
23 Jun 2026, 5:00 pmClosed
DEPUTY DIRECTOR
DEPUTY DIRECTOR
ESTIMATE FOR THE COS TOF MAINTENANCE OF DRIVERS QUARTERS AT ANAPPADY UNDER SUNGAM RANGE DURING 2026-27
2026_FD_855056_1
D-33591/2026
Open Tender
Civil Works - Buildings
Item Rate
ANAPPADY
Please refer Tender documents.
5 documents required · 5 mandatory
₹650
Yes
₹7,345
Yes
21 Jul 2026
9 Jun 2026
25 Jun 2026
9 Jun 2026
23 Jun 2026
9 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1MTC | |||||
| 1.001 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | - | sqm | - | - |
| 1.002 | 13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work | 1 | sqm | - | - |
| 1.003 | 13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work | - | sqm | - | - |
| 1.004 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | - | kilogram | - | - |
| 1.005 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 1 | kg | - | - |
| 1.006 | OD38523/2026-2027:Providing and fixing Powder coated Mild steel T ceiling section 15x42x0.40 mm | - | kg | - | - |
| 1.007 | OD38524/2026-2027:Providing and fixing Aluminium composite panel fixing false ceiling works of thickness 3mm of Standard sizes include 8ft x 4ft (2440mm x 1220mm), 10ft x 4ft, and 12ft x 4ft. including all fittings | - | sqm | - | - |
| 1.008 | 9.117.1:Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-chargeExtruded section profile size 48x40 mm | 1 | metre | - | - |
| 1.009 | 9.120.1:Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and sized of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of whicj 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5mm thick, 95 mm wide PVC sheet out of which75 mm shall be tapered in 45 degree on th inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mmx2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded /sealed to the styles & rails with 7 mm (5 mm + 2 mm ) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer -in-charge, manufacture's specification & drawing.30 mm thick plain PVC door shutters | 1 | sqm | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.04 MB
viewsbd.pdf
Tender Documents • 1.63 MB
BOQ_1445057.xls
BOQ • 0.31 MB
EPAYMENT-FORM.pdf
Other Document • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].