Interior work of Administration Academic and Library building for Kerala bhasha Institute

Amount

Civil works

9.105.1 : Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with Zinc coating of 120 gms/ (both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.75 mm overall thickness partition with 12.5 mm thick double skin fire rated board conforming to IS : 2095 : part I

13.98.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

od255918/2021_2022 : Reception table (1500mm*600mm*750mm) Providing and fixing in place reception table of size 1500mm*600mm*750mm made of a combination of BWR grade 6mm,12mm and 16mm plywood of approved quality and make All exposed portions of the plywood shall be finished with 1mm thick laminate of approved make and shade.The inside portion of the reception table shall be finished with 0.8mm laminate.The rate include all other necessary hardware materials and labour charges etc.

od255919/2021_2022 : Providing and fixing side return table of size 1000mm*400mm*650mm shall be formed out of 18mm thick BWR plywood with 1mm laminate and all exposed edges lipped with PVC edge banding.Inside portion of the table shall be covered with 0.8mm laminate.Rate includes all other necessary hardware materials and labour charges.

od255920/2021_2022 : Supplying and providing workstation of size 1200mm*600mm*750mm with vertical member going up to 1000mm in height to be formed out of 18mm thick pre-laminated particle board , with all exposed edges lipped with PVC edge banding & with Prelaminated particle board in the front .The rate includes material cost and labour charges.

od255921/2021_2022 : Supplying and providing Plus formation workstation of size 1500mm*600mm*750mm with vertical member going up to 1000mm in height to be formed out of 18mm thick prelaminated particle board, with all exposed edges lipped with PVC edge banding.The rate includes material, conveyance and labour cost.

od255922/2021_2022 : Wall paper<br>Supplying and fixing decorative washable including all material and labour charge etc

od255923/2021_2022 : Partition with BWR plywoood <br>framework with 16mm thick BWR plywood with an equal distance of 90cm or dimension perpendicular to ground and divide the height of partition with an equal dimension of 90cm covering the frame on both sides using 9mm thick BWR plywood on the exposed portions of the plywood shall be finished with 1mm thick laminate of approved make and shade. including all materials and labour charges etc.

od255924/2021_2022 : Glass partition<br>Supplying and fixing glass partition with 6mm plain glass.<br>Including all materials and labour charges etc.

od255925/2021_2022 : Plywood Paneling<br>providing and fixing plywood paneling using 12mm, BWR plywood over laid with 1mm textured laminate and quoted shall include all material, labour charges, cost of conveyance, etc.

od255926/2021_2022 : Toughened Glass Door<br>supplying and fixing of 10mm toughened glass door using patch fittings, including all materials and labour charges etc

od255927/2021_2022 : supplying and fixing door closer including all materials and labour charges tc

od255928/2021_2022 : Flush Door Frame<br>providing and fixing flush door frame using a combination of 6mm, 9mm, 12mm and 16mm BWR grade plywood overlaid with 1mm laminate rate quoted shall include all material, labour charges, cost of conveyance etc

od255929/2021_2022 : Flush Door<br>providing and fixing flush door in position overlaid with 1mm laminate including vision panel, tower bolt hinges etc<br>rate includes all material cost, labour and cost of conveyance etc

od255930/2021_2022 : Supplying and fixing Door handle including all materials and labour charges etc

od255931/2021_2022 : supplying and fixing door lock including all materials and labour charges etc

od255932/2021_2022 : supplying and fixing 400mm chrome finished door handles including all materials and labour charges etc

Electrical Works

1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.12 : Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

od261390/2021_2022 : Suppling and fixing of following ways surface/recess mounting, vertical type,415 V, TPN MCB distribution board of sheet steel ,dust protected , duly powder painted, inclusive of 200A, tinned copper bus bar, common neutral link, eart bar, din bar for mounting MCBs(but without MCBs and incomer)as required.

2.3.2 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door

2.15.3 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.13.2 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

5.19 : Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

5.4 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)

1.27.5 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)

1.26 : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

1.14.6 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 16 sq. mm + 1 X 6 sq. mm earth wire

od261391/2021_2022 : Supplying and fixing 40 A 4P miniature circuit breaker suitable for inductive load of following poles in the existing MCB

od261392/2021_2022 : Supplying and fixing 100A 4P miniature circuit breaker suitable for inductive load of following poles in the existing MCB

od261393/2021_2022 : Providing and laying 10SWG copper wire rates including all materials

Providing and fixing Fan

Providing and fixing tube

Providing and fixing LED Bulb

P ANILKUMAR

Bidder Name

SOBHANA KUMAR PARAMESWARAN

P ANILKUMAR