SPECIAL REPAIR TO CERTAIN BR WORKS AT MES INSTALLATION OF SYL PLANT UNDER GE U AMBALA CANTT

Amount

Material & labour for complete removal of existing treatment internal as well as external or ceiling and soffits of Over Head Tank and installation by scrapping with mechanical wall sander (mechanical vacum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed.

Material & labour for applying One coats of white cement based putty on old as well as new plastered surface of Over head tank and installation of GE utility including sand papering the puttied surfaces to form an even and smooth surface complete all as specified and directed.

Material & labour for preparation of puttied surfaces and applying two coats of weather proof exterior emulsion paint over and including priming coat of exterior primer over new or untreated old plastered surfaces of Over head tank and installation of GE utility to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

Notes for Periodical services: MOBILISATION OF T&P AND MATERIAL: The Contractor shall complete the following activities within 20 days from the date of commencement of work: (a) Submission of Memorandum of Understanding (MOU) with any of paint manufacturer (b) Obtaining approval of paints & authorized applicator of paints manufacturer from GE (c) Procurement of T&P required for mechanical mode of painting (d) 30% of the quantity of Paints, Primer & Putty required (as per respective manufacturer’s average coverage area) for various items of painting catered in CA COMPENSATION FOR DELAY IN MOBILISATION OF T&P AND MATERIAL BEYOND 30 DAYS: In case of failure on the part of contractor to complete above mobilization within the stipulated period, compensation shall be recovered from the contractor at the rate of Rs. 1,000/- (Rupees one thousand only) per day subject to a maximum of Rs. 1,00,000/- (Rupees one lakh only). Condition 50 of IAFW-2249 (General Conditions of Contracts) shall be deemed amended accordingly. The contractor shall submit original Tax invoices & e-way bills for the entire quantity of materials so procured. The material and T&P collected shall be entered in the MB as “NOT TO BE ABSTRACTED” and shall be duly signed by both the parties. Notes for Ser item No 1.00 to 3.00:- i) Height of the bldgs or overhead tank is Appx Up to 30 mtr is incl in Quoted Rates (ii) Quoted rate shall be deemed to be inclusive of all materials, labours, tools and plants,scaffolding and working upto height 30 meter etc. (iii) Adoption of necessary safety arrangement like safety belts/ropes, helmets, netting etc which are required for safety of worker working at height 30 mtr shall be mandatory.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the premises complete all as specified and directed.

Material & Labour for Virified Ceramic tiles dark/light shade 9 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 and not exceeding 1.00 sqm, in floors or skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including cement screed bed 15mm thick in screed bed (1:6) base complete all as specified and directed.

Material & Labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick , dark shade (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed 15mm thick in screed bed (1:6) base complete all as specified and directed.

Material & Labour for coloured glazed ceramic tiles (300x 450x 7mm thick) in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster 1:4 complete all as specified and directed.

Material & Labour for 18-20 mm thick black granite stone slab of any type with table rubbed and polished , set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab including dismantling of existing complete all as specified and directed.

Supply & fixing of heavy duty tiles non skid ( coloured) good grip series of size 300x 300 mm x 10 mm thick, set ,jointed and pointed in neat cement slurry laid over and including 20 mm thick average thickness cement mortar 1:4 bed complete all as specified and directed.

Taking down chowkhats or frame not exceeding 1.5 sqm each with shutter(s) (without taking off shutters from the frame), including removing from site and making good the disturbed surface as per original (except filling of hold fast concrete),complete all as specified and directed.

Taking down chowkhats or frame exceeding 1.5 sqm but not exceeding 4sqm each with shutter(s) (without taking off shutters from the frame), including removing from site and making good the disturbed surface as per original( except filling of hold fast concrete), complete all as specified and directed.

Supply & fixing of steel window (box type) factory made double shutter (glazed and wire gauzed) with side hung shutters including pintle type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, complete with glazing bars dovetailed or welded including MS fillets, including provision and welding of guard bars including one shop coat of red oxide primer over window, frame & guard bars complete all as specified and directed. Notes: - (i) Windows shall be fabricated as per HQ CE Chandigarh Zone drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 with one amendment dated 22 Jun 07 in Sh 1/3 and dt 15 Jun 07 in sh 2/3 & 3/3 and these drgs may be referred from the office of GE (U) Ambala/HQ CWE AMBALA. (ii) Glazing, wire gauge, and guard bars shall be included in quoted rate and not paid separately (iii) For payment purpose weight of window shall be measured without painting, wire mesh and glazing & BOO will be nominated by Accepting Officer for measuring of actual weight of window.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

Factory made single extruded WPC (Wood Polymer Composite) solid glazed/wiremesh door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

Supply and Fixing of 2nd class hardwood factory made 35 mm thick plain, framed, panelled shutters (any numbers of panels),with panels of timber flat on both sides (feather edged),or vaneered particle board medium density, wood particle board with commercial face vaneers supplied and fitted to chowkats complete all as specified and directed.

Supply and Fixing of 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted withcut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and directed.

Supply and fixing Butt hinge medium weight cold rolled MS of size 100 mm complete all as specified and directed.

Supply and fixing MS pressed handle, oval type, stove enameled black of size 150 mm complete all as specified and directed.

Supply and fixing 200 mm long MS barrel tower bolt, stove enameled black with bright bolt complete all as specified and directed.

Supply and fixing 200 mm long, MS sliding door bolt, clip & bolt type, stove enameled black with bright bolt not less than 12mm dia complete all as specified and directed.

Surface Excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil and removing outside of MOD land complete all as specified and directed.

Hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Demolition of Cement Concrete (Unreinforced Concrete) of any description and in any position not otherwise specifically provided for complete all as specified .

Material & labour for 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement as in Fire breaker/Plinth protection/ path/ hard standing complete all as specified and directed. Note:- 1. Work also executed on sides of water pond and in canal lining work necessary compaction of lower portion, formwork for sides as applicable including in quoted rate.

Material & labour for 75 mm thick plain Cement concrete type D-2, 1:4:8 using 40 mm Graded stone aggregate as in sub base etc. complete all as specified and directed.

Material & labour for 60mm thick (M-35 grade concrete) machine pressed precast concrete interlocking paver block of approved design and shape confirming to IS 15658-2006 with grey cement and pigment laid over 25mm thick sand cushning complete all as specified and directed.

All as per Ser item No. 27.00 but except tile and including sand cushioning taken from dismantling complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage open where ever required complete all as specified and directed.

Material & labour for concrete glossy cadbury chequered tile 30cm x 30cm x 25mm thick, with grey cement and set jointed and pointed in neat cement slurry in floors, over 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material & labour for 80 mm thickness machine pressed precast rubber moulded interlocking paver block any shape and size conforming to IS-15658-2006 of M-40 grade with grey cement with pigment complete all as specified and directed.

Material & labour for providing cement concrete in edges Type B1 1:2:4 using 20 mm graded stone aggregate in roof kerbs or mud stops,rounded or chamfered on edges of tiles complete all as specified and directed.

Taking down cement plaster and raking out joints, hacking for key, scrubbing down with water built in cement mortar complete all as specified and directed.

Material & labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortor 1:4 finished even and fair without using extra cement complete all as specified and directed.

Material & labour for 10mm thick rendering on other than fair faces of brick or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Material & labour for rough cast plaster incl 15 mm thick CM 1:3 on brick work or concrete surface complete all as specified in SSR Part -1 clause 14.22 complete all as specified . Note:Rough cast plaster finish shall be as follow :- After applying the under coat cement mortar 1:3 and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggreagte ( Which is generally of size between 6 to 12 mm depanding on the texture required mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even complete all as specified and directed.

Material & labour for 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as in levelling course complete all as specified and directed. Note:- The concerned item executed in drain bed/below tiling work and in canal lining work as top course.

Dismantling of loose brick work/ brick tile built in cement mortar of any description etc complete all as specified and directed. Note:- The concerned item executed in drain,canal lining work and brick wall and there connecting items.

Material and labour for using old brick work retrived from item no 38.00 with sub class `B` brick old size in CM 1:4 straight or curved on plan exc 6m mean radius complete all as specified and directed.

Material and labour for using old brick work retrived from Ser item No 38.00 with sub class `B` brick old size in CM 1:3 straight or curved on plan exc 6m mean radius laid in canal lining work at SYL and outside of the plant complete all as specified and directed.

Material and labour for brick work with sub class `B` brick old size in CM 1:4 straight or curved on plan exc 6m mean radious complete all as specified and directed.

Material and labour for brick work with sub class `B` brick old size in CM 1:4 straight or curved on plan exc 6m mean radius laid in canal lining work at SYL and outside of the plant complete all as specified and directed.

Supply & fixing in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and averae width of aperture 1.40mm and fixed with with stainless steel wire staples complete all as specified and directed.

Supply and fixing of mild steel framed work as in ornamental gates, cattel trap, multiple grating in canal and other section with gusset plates, rails, braces, grills, pintal etc. complete drilled for fixing steel sheeting or other covering to be prepare for hanging including either hooks or hinges or welded inter connecting etc. conforming to Fe-290 (Gde E-165), and incl dismantling of old unsv gates /door/frame structure or any other iron member complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Supply and fixing of prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridge, vally gutter etc fixed with self tapping screws or using J hook where as required complete all as specified and directed.

Supply and fixing of prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridge, vally gutter etc fixed with self tapping screws complete all as specified and directed.

Supply & fixing of 16 to 18mm thick PVC board both side laminated for cabinet shelf, bottom support, side wall and top walls including all necessary fitting & fixtures to fix the PVC board with existing surface such as RCC, Steel shall be fixed by using necessary fittings and including dismantling of existing complete all as specified & directed.

Material & labour for re-securing/ adjusting existing false ceiling grid, any type and make are required tightening to remove sag portion/ depression in false ceiling grid including replacement of missing sections / part/ suspenders as per existing size etc complete all as specified & directed.

Dismantling wall lining, ceiling board or insulation boards, any thickness, including cover fillets complete all as specified & directed.

Material & labour for Metal false ceiling consisting of 600mmX600mm, 5mm(+ 0.25) thick embossed false ceiling sheet of density 600 Kg/Cbm manufactured by an ISO-9001-2015 certified company, used as panel insert in a frame work made using anodised aluminium T-section of sizes 1" x1" (25mmX25mm,1mm thick) in square pattern of grid sizes of 2'X2' (600mmX600mm). The aluminium framework is supported from the ceiling with the help of 'J' hook and G.I. wire / 4mm MS rods at every 1meter interval of required sizes to maintain proper level etc. The aluminium frame work is supported on the side wall with the use of aliminium L- Section of size 1"X1" (25mmX25mm, 1mm thick) Angles etc complete all as per direction of Engineer-In- Charge, Manufacturer, specification and drawing.

Supply & fixing of 5 mm light colour PVC sheet, solid PVC wall paneling/ lining PVC sheet inclusive of solvent cement and fixing at site over PVC frame 600mm x 600mm on wall for fixing of paneling /lining inclusive of necessary filling material and PU solvent fixing on wall with 35mm U and T cleat to cover joint complete all as specified & directed.

Material & labour for RCC 1:1.5 : 3 (Nominal Mix) type B–1 using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and rested on compacted earth or slope of water pond and in canal lining work including necessary compaction of lower portion complete all as specified and directed. Note:- 1. Reinforcement shall be measured and paid separately. 2. Work shall be executed on sides of water pond and in canal lining work necessary compaction of lower portion, formwork for sides as applicable included in quoted rate.

Material and labour for mild steel TMT bars Fe 500/550 D, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Use & waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings , slab over manholes similar work; not exceeding 200mm thick (Horizontal or sloping) (rough finished flat surfaces of concrete), complete all as specified and directed.

Supply & fixing of extruded Powder coated aluminium section as in window, ventilator, door and partition wall (powder coated 50 micron in brown/white colour) with movable /sliding, openable or fixed type shutter, frame or any pattern as directed, aluminum section medium weight of series B or size as directed by the Engr in charge cut to size, jointed toghter including rubber beading and all necessary fitting complete all as specfied and directed. Note :- (i) Only aluminum sections measured and paid in this item and thickness of any member should not be less than 2mm. (ii) Rate quoted by the contractor shall deemed to be inclusive of all neecssary fittings and fixture such as roller, handle, Harrison/ Godrej locks including keys, etc.

Supply & fixing of sheet glass 4.8 mm thick in glazing with rubber and aluminium beading/packing with rubber gasket complete all as specified and directed.

Supply and fixing of GI tubing, ISI Marked, 20mm bore, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required including taking down of old tubing as existing at site and removal, complete all as specified and as directed.

Supply and fixing of GI tubing, ISI Marked, 15mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and directed.

Supply & fixing in repair vitreous china wash down water closet pedestal pattern (EWC) , White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Supply & fixing in repair 15mm bore fancy type, chromium plated, angle cock,/ stop cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange, complete all as specified and directed.

Supply & fixing in repair for vitreous china squatting pan of orrisa pattern size 580 x 440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and foot rests of any pattern complete including provision of lime concrete bed and connection to flush pipe excluding flushing cistern, flush pipe and bracket and making good the disturbed area complete all as specified and directed.

Supply & fixing in repair Vitreous China urinals, bowl type (back or corner wall type), size of 465 x 355 x 265 mm white (minimum) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) Vitreous China bowl urinal flat back,, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

Supply & fixing in repair vitreous china wash hand basin white flat back of size 550x440mm including CI brackets and PVC connection 450 mm long having PTMT nuts and chromium plated waste coupling and making good to disturbed portion including 32 mm dia PVC waste pipe etc. complete all as specified and directed.

Supply & fixing in repair PVC valveless, syphonic action type, flushing cistern,10ltr capacity low level, white, with inlet, ball valve, float and handle including bracketse with PVC bend/Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern and making all connection complete all as specified and directed.

Supply & fixing in repair 15mm bore for fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supply & fixing in repair CP Health faucet shower including 1.50 meter long flexible tube complete all as specified and directed.

Demolition and breaking up drain pipes100/75 mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

Supply & fixing of PVC (SWR) 110 mm pipe single socket in any length with rubber ring joints fixed to wall/ floor complete all as specified and directed.

Supply & fixing of PVC (SWR) 75 mm pipe single socket in any length with rubber ring joints fixed to wall /floor complete all as specified and directed.

Supply & fixing PVC SWR) bends 110 mm bore in repair complete as specified and directed.

Material & labour for removing of existing depressed dholpur stone of any specification, including leveled depressed portion of PCC below stone part and relaying of the same with existing specification and thickness, set and jointed including retrived stone complete all as specified and directed. Note:-Quoted amount including cement concrete 1:2:4 type B1 using 20mm graded mechanically crushed stone aggregate, thickness as per existing.

Supply & fixing PVC in repair (SWR) bends of 75mm radius complete as specified and directed.

Supply & fixing PVC in repair floor trap, plain with grating including jointing with solvent cement of outter diameter outlet of 75mm as in repairs complete as specified and directed.

Supply & fixing in repair PVC waste pipe 32/38mm dia flexible PVC hose pipe of standard length/size suibable for wash basin/ urinal as in repairs complete as specified and directed.

Material & Labour for PVC water storage tank 500 Litre capacity HDPE triple layer ISI marked fixed & hoisted in position on staging or roof complete with locking arrangement, over flow pipe, air lock pipe, 15mm Ball valves, high pressure of PTMT with, ISI marked including dismantling of old tanks of of any description complete as specified and directed.

Supply & fixing in repair PVC connection 600mm long with 2 nos PTMT check nuts, suitable for 15mm bore complete all as specified and directed.

Cleaning the septic tank/sludge chamber upto and including 50 users of any depth/area/condition incl taking out stagnated sludge or any other material mixed with the sludge etc deposited in the septic tanks, filling in closed container and depositing in excavated pit, covering the pit at least 500m beyond nearby living accn or area as marked by station controlling authority with earth after depositing sludge, sprinkling fresh lime on covered pit and around septic tanks/ soakage wells to make it hygienic complete all as specified and directed. Note:- (i) Cost of pumping with mechanical sewage pump, excavation of earth pit and fresh lime shall be deemed to include in the rate quoted. (ii) Charges of covered container incl its transportation shall be deemed to include in the rate quoted. (iii) Depth of liquid sludge in the septic tank will be determined and recorded before commencement of work by any Engg conventional method in the presence of Engr-in charge and Contractor.

Supply & fixing in repair for 20mm bore gun–metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Material & Labour for Mirror polishing on existing Kota stone/ marble stone work where ever required to give high gloss finish including repair/ replacement of broken kota stone/marble stone complete all as specified and diected.

Supply and fixing in repair Steel rolling shutters 1.25mm, with ball bearing, as specified including top cover, anchoring rod, pipe shaft, Hood cover 1.25 mm thick, curtain, hold fast stopper, square bar guide channel, bracket plate, lock plate, handle, sliding lock, pulling hook, hasp and staple and one shop coat of primer; erected in position as directed by Eng- In- charge, push pull or manual type complete all as specified and directed.

Dismantling brick tiles single layer on roofs complete all as specified and directed.

Demolition of mud in roof any thickness including plaster & leaping whether full thickness removed or part thereof complete all as specified and directed.

Material & Labour for PCC M-15, nominal mix, type B-0(1:2:4), using 12.5mm graded crushed stone aggregate as in PCC padding on roof etc., and the like rounded or chamfered on edges including necessary form work, complete as specified and directed.

Material & Labour for Water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of cleaning of concrete surface or plaster surface of roof and applying evenly a bitumen primer conforming to IS 3488@ 0.30Kg per sqm followed APP modified polymeric water proofing membrane minimum weight 3.6kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160 gm per sqm) as per manufacturer's instruction and including taking the APP membrane will be required where the parapet wall exceed 45cm for carrying over and taking into parapet walls, cut out neatly a horizontal groove 6.5 cm deep, 7.5 cm wide section with lower edge at not less than 15 cm above the graded roof surface and groove shall be finished smooth with cement mortar 1:4, where the parapet wall height is 45cm or less no grove will be required as the water proofing treatment will be carried over the top of parapet wall complete all as specified and directed.

Material and labour for 40mm thick brick tiles laid and bedded in cement mortar 1:6, 15mm thick and joints grouted flush in cement mortar 1:3 mixed with 5% or crude oil by weight of cement complete all as specified and directed.

All as per Ser item No 87.00 here in before but except tiles (Old serviceable tiles obtained from Srl item No 83.00 here in before)

Uprooting scrubs/plant/flora & fauna on wall girth not exceeding 100mm from brick wall by cutting holes into masonry/walls for digging out roots and dosing Sulfuric/Phenolic Acid as per manufacturer's instruction to burn deep rooted tree roots and making good the disturbed area with cement mortar in CM 1:3 using water proofing compound including necessary scaffolding upto a height and depth of 10 metre complete all as specified and directed. Note :- scaffolding incl quoted rate. Plastered paid separetely. Brickwork required qty shall be paid separetely. Any type of tree on walls, sloped part of water tank and on roof including peepal tree.

Dholpur stone slab red color of thickness not less than 20mm with hammer dressed facework (with maximum depression from a straight edge held against the dressed surface not exc 20mm), laid on sides of water pond , laid and jointed in cement and stone dust mortar 1:3, recess pointed (10mm x 20mm) with an admixture of white cement and Dholpur stone dust 1:1 complete all as specified and directed. Note:- Work executed in water tank at SYL and all necessary equipment, saftey measure and T & P included in quoted rate.

Material and labour for removing of existing interlocking tiles of any specification, including demolition of PCC below interlocking tiles and relaying of the same with cement concrete 1:2:4 type B1 using 20mm graded mechanically crushed stone aggregate 75mm thick including interlocking tiles of existing specification and thickness, set and jointed including 25 mm thick average thickness of sand, complete all as specified and directed.

Supply and fixing of galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc.complete all as specified and directed

Supply and Fixing chain link fencing size 100mm x 100mm (3.8mm thick dia wire) including line wires and any type of standards, rails, straining bolts etc., including provision of binding wire fencing complete all as specified and directed.

Supply and Fixing chain link fencing size 50mm x 50mm (3.8mm thick dia wire) including line wires and any type of standards, rails, straining bolts etc., including provision of binding wire complete all as specified and directed.

Supply and fixing concertina coil 600 mmdia(approx 50 turns per coil) approx weight 8 Kg (+/- 5%)expendable 6 to 8 mtrs complete all as specified and directed.

Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n exc 50 m and making good surface in soft and loose soil complete all as specified and directed.

Mild steel work as in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or reveting, etc., & similar work conforming to Fe 290 or E-165 complete all as specified and directed.

Supply and fixing of 11 to 15 mm dia of neck mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut with length of bolt exc 5cm but not exc. 10 cm long complete all as specified and directed.

Supply and fixing of reinforced concrete pipes 150 mm dia bore, class NP3, laid and jointed complete with collars etc all as specified and directed.

Supply and fixing of factory made precast RCC covers with frame (type A-1, 1:1½:3, using 20 mm graded stone aggregates), of size 800mm x 300mm x 70mm with plain faces, including 50x3mm MS flat all around and incl reinforcement, set in cement mortar 1:4 complete all as specified and directed.

Material and labour for cutting/chipping the spalling concrete including loose plaster from old surfaces of RCC walls, chajjas/roof projection, Over Head Tank, water tank and water cleaning tank on concrete as well as brick work of canal etc. and trimming & cleaning the surface to recieve gunting and providing pressure gunnting average 30mm thick in PCC 1:1:2 type B-0 including supply and fixing stainless steel wire mesh of size 1.40mm nominal dia average width of apperture 12mm and binding with 22 gauge binding wire with reinforcement and finishing the concrete surface with 5mm thick plastering in cement mortar 1:3 even & smooth without using extra cement including welding the reinforcement to existing reinforcement complete all as specified and dirceted. Note: (i) Reinforcement shall be measured and paid seperately (if required). (ii) Necessary scaffolding as required at site shall be provided by contrator without any extra cost and shall remove the same on completion of the work. (iii) Adoption of necessary safety arrangement like safety belts/ropes, helmets, netting etc which are required for safety of worker working at height 3mtr shall be mandatory.

Cleaning removing all scale and dirt, boulders, grass, vegetation of any size etc, from drain and from mouths of circulating pipes, etc incl removing of the same upto 50m and spreading or level with the exesiting ground complete all as specified and directed.

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush sheet of 30mm for covering of open tank in filteration plant size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

Material and labour for earth filling in foundation or surrounding area of exesiting pond and canal including there sides to protect flood water and low lying area back side plant's area spreading and levelling in layers n exc 25cm thick wall ramming including watering as required complete all as specified and directed.

Supply and fixing in repair 15mm bore for fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supply and fixing of reinforced concrete pipes 300 mm dia bore, class NP3, laid and jointed complete with collars etc complete all as specified and directed.

Note:- Amount of credit of Rs. 65330.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

RAJINDER KUMAR AND ASSOCIATES (BID ID -3385715)

RONKI RAM AND COMPANY (BID ID -3395872)