REPAIR TO PATH FOOTPATH REPAIR TO DRAIN AND BOUNDARY WALL AND PERIODICALO SERVICES OF BOUNDARY WALL OF SRC PRC MDC STN HQ ASRI ASC MH MES AND MISC WORK AT RAMGARH CANTT

Amount

Demolition of plain cement concrete(un-reinforced ) in ground floors, terrazo tiles floor & paving not exceeding 15cm thickness (below or above ground level) and removal of rubbish off from site complete all as directed by Engr-in-Charge.

Dismantling of stone slab and tiles of any description or thickness laid,bedded and pointed in any mortar in floors ,aprons etc and removal of rubbish off from site complete all as directed by Engr-in-Charge.

M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring, foundations,filling & mass concrete for fencing posts, foundation of pole ,struts & stay assembly etc complete all as specified and directed.

M&L for 60mm thick factory made machine pressed pre-cast concrete interlocking paver block of approved shade of any shape and size conforming to IS-15658-2006 of M-35 grade,laid over & including cleaned dry sand cushion bed 50mm thick deposited, spread and levelled, watered and rammed to a true surface and proper embedding/ laying by vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L for 80mm thick factory made machine pressed pre-cast concrete interlocking paver block of approved shade of any shape and size conforming to IS-15658-2006 of M-40 grade, laid over & including cleaned dry sand cushion bed 50mm thick deposited, spread and levelled, watered and rammed to a true surface and proper embedding/ laying by vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in levelling course,kerb/ benching/ coping /window cill etc including weathering, slightly rounded or chamfered angle and throating including use & waste of necessary form work etc complete all as specified and directed.

M & L for 100 mm thick plain cement concrete (1:2:4) mix, type B-1 (using 20mm graded crushed stone aggregate ) as in path,berm etc., finishing the surfaces even and fair without using extra cement, including 10 mm wide, 100mm deep joints made at 3.00 m in length and filled with bitumen 85/25 grade and sand in the ratio 1:3 including necessary form work, complete all as specified and directed.

M & L antifungal chequered cement concrete tiles 30cmX 30cm X 22 to 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over and including 20 mm thick cement screed bed in cement mortar (1:6) complete all as specified & directed.

M&L for Vetrified light shed coloured floor tiles 10 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry and pointed in cloured cement to match the shade of tiles over & including 15 mm thick screed bed in cement mortar (1:6) etc complete all as specified & directed.

M & L for 50 mm thick plain cement concrete (1:2:4) mix, type B-1 (using 20mm graded crushed stone aggregate ) as in flooring, path,berm etc., finishing the surfaces even and fair without using extra cement, including 10 mm wide,50mm deep joints made at 3.00 m in length and filled with bitumen 85/25 grade and sand in the ratio 1:3 including necessary form work, complete all as specified and directed.

Demolition of cement concrete reinforced as in chullah hoods, shelves, cover slab and platform, etc,and removal of rubbish off from site complete all as directed by Engr-in-Charge

M&L reinforced cement concrete 1:1.5:3 type A-1(using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. Note : Reinforcement & form work will be measured & paid seperately under respective item of BOQ.

Use and waste of form work to sides of soffit of suspended slab such as roof slab ,floor slab ,landing and similar work , not exceeding 200 mm thick for rough finished surface of concrete complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over grade Fe-500, cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete etc all as specified and directed.

M&L for mild steel TMT bars 08 mm dia and over grade Fe -500 , as in reinforcement, spacers & binders ,cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete etc all as specified and directed.

Demolition of brick work of any description and in any position built in cement or cement lime mortar including all quoins, arches, pillars including segregation of serviceable bricks for reuse & removal of rubbish out off from site etc complete all as specified and directed.

M&L for Brick work using old size bricks ,straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 etc complete all as specified & directed.

M&L for rendering 15 mm thick on fair face of brick masonry/concrete surface etc in cement mortar (1:6) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of newely plastered surfaces of wall and applying three coat of white wash on new wall surface complete all as specified & directed.

M & L for 300 mm bore reinforced concrete pipe ,class NP-2, laid and jointed with collars complete all as specified & directed.

M & L for 100 mm thick Concrete bed to 300 mm bore pipe including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate )complete all as specified & directed.

Taking down cement plaster of brick or stone masonry etc including raking out joints , hacking for key & scrubbing down with water etc and removal of rubbish off from site complete all as directed by Engr-in-Charge.

M&L for preparation of newly plaster surface of wall and applying two coats of cement base paint over a coat of alkali primer including necessary scaffolding complete all as specified & as directed.

M&L for 75 mm thick plain cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring etc including necessary scaffolding complete all as specified & as directed.

M&L for coloured Non digital paver vetrified exterior floor tiles 10 mm thick (size 300 mm X 300 mm X 10 mm thick) as in floors etc set & jointed in neat cement slurry and pointed with white or cloured cement to match the shade of tiles over & including 15 mm thick screed bed in cement mortar (1:6) etc complete all as specified & directed.

M & L for preparation of old decorated surfaces of wall including brooming down or steel wire brushing, scrapping down smokes soot moulds, moss,black /green fungle layer and efflorescent salts and treating oil and greasy spot & applying two coats of cement base paint including necessary scaffolding complete all as specified & as directed.

M & L for preparation of old treated/painted surfaces of steel of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint (ordinary tint) any colour on steel surface complete all as specified and directed.

Removing of trees/ plants including roots from wall / roof top surface (girth of tree/plant not exceeding 10 cm including cutting of trunk portion,digging out roots, filling holes) and making good the disturbed surfaces before applying finishes and removing of unserviceable material to a distance not exceeding 50 m and clearing site complete all as specified and directed.

M/s Ray construction

simplex infra project

M/S KAMLESHWAR SINGH

M/S PARAS NATH SINGH

M/s friend enterprises

M/S Bhushan Kumar Jain

M/S Parmar Construction

Raj Construction

upadhyay engineers and consultant