Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.7 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹30.3 L+₹1.6 L (5.54%)Rejected-Finance PLOT NO 261 SHANTI KUNJ ALWAR 301415 RAJ | ALWAR | RAJASTHAN | 301415 | L2 | Rejected-Finance Being 2nd lowest |
Tender Value
Refer Docs
EMD Value
₹58,300
Closing Date
4 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
MMD PRAVEEN NANDIKATTI GE AF SARSAWA
Garrison Engineer (AF) Sarsawa, Distt. Saharanpur (U.P)
PROVN OF CERTAIN REVENUE AND MINOR WORKS AT AF STN SARSAWA AND 1 AFSB DEHRADUN UNDER GE (AF) SARSAWA
2022_MES_556224_1
8122/SAR-26/2022-23
Open Tender
Civil Works
Item Rate
333 days
GE(AF) SARSAWA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE(AF) SARSAWA
₹58,300
Yes
23 Nov 2022
6 Oct 2022
11 Nov 2022
6 Oct 2022
4 Nov 2022
21 Oct 2022
6 Oct 2022 - 21 Oct 2022
Amount
M&L for Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m
Forming jambs, etc., to openings (to foregoing item), with stone supplied by MES including cutting, toothings and properly bonding into old work, including facing and pointing (if necessary) to match existing work, complete
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed by Engr-in-Charge. Note : Removing of vegetation / shrubs / brushwood / undergrowth and carrying away rubbish to a distance of 50 m deemed to included in quoted rate.
Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25cm in soft / loose soil complete all as specified& directed by Engr-in-Charge.
M&L for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and leveled in each layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed.
M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20cm wide and sides of RCC / PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide for rough finished surfaces of concrete complete all as specified and directed.
M&L for reinforced cement concrete Nomal mix type B1(1:2:4) using 20mm graded crushed stone aggregate in Slabs supported on walls, beams and columns in floors, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge. Note :- Reinforcement & formwork shall be measured and paid for separately.
M&L for mild steel TMT bars 10mm dia & over cut to length bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and bending with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
M & L brick work with sub class brick (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for rendering 10mm thick in cement mortar 1:6 on stone masonry surfaces or surface other than fair face of brick work of walls including finishing the surface fair and even complete all as specified.
M&L for preparation of new plastered surfaces of walls and applying two coats of Oil bound distemper over a coat of 1mm thick wall care putty of approved tint complete all as specified & directed by Engr-in-Charge.
M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, mixed with water proofing admixture (ISI marked) as per manufacturer’s instructions, finished even and smooth without using extra cement complete all as specified. Note : - Supply only water proofing admixture shall be measured and paid for separately.
Material and labour for preparation of new plastered surfaces and applying two coat exterior emulsion paint over a coat of primer paint complete all as specified and as directed any tint. Note: The Camouflaging Pattern decided by Engr-in-Charge
Supply only integral liquid water proofing compound (ISI marked). Make : Pidilite (Dr. Fixit Pidiproof LW) or equivalent of Fosroc / Sika / STP
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed CM 1:6 complete all as specified& directed by Engr-in-Charge.
S&F anodized aluminium frame with power coating (minimum thickness 50 micron) and other sections for doors, windows, ventilators, partitions, with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.
S&F anodized aluminium door shutters, aluminium section weighing 0.55 kg/m, with power coating (minimum thickness 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc. complete all as specified & as directed.
S&F door closer hydraulically regulated, designation No. 2, aluminium (Die cast) body, universal type (ISI marked) suitable for door shutters of 701 to 850mm in width aand weight between 36 to 60 Kg and fixed complete all as specified & as directed.
Supply only 5mm thick Tinted Coloured glass fixed to metal frame complete all as specified and directed.
S&F anodized aluminium grill with power coating (minimum thickness 50 micron) of approved pattern and fixed to the existing window/ventilator frame with CP brass/stainless steel scrwed @ 200mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement & directed by Engr-in-Charge.
Supply and fixing stainless steel hinges 100mm long medium weight to pressed steel/angle iron frames by welding/screws all as specified.
M&L for 50 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).
Supply and fixing Powder coated aluminium sliding window (Bombay sliding Window) made out of hollow extruded aluminium sections as mentioned below and glazed with tinted coloured glass 4 mm thick, fixed with glazing clips, rubber beading/gasket powder coated aluminum beading, screws and lock type handles of size 75 mm, 2 Nos aluminium tower bolts 150 mm long etc complete all as specified and as directed. Shutter top & bottom size : 37.50 x 15 x 1.60 mm thick Shutter inner lock size 37.50 x15 x 1.60 mm Shutter side (handle) size 37.50 x15x1.36 mm Chowkat Bottom : Size 50.30x26x1.20 mm Chowkat top & sides : Size : 50.30x26x1.00 mm
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth or n exc 10 Sqm on plan and n exc 1.5 m in depth & getting out, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes or for laying underground cable, pipe lines etc. in soft/ loose soil, complete all as specified & directed.
M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation complete all as specified & directed by Engr-in-Charge.
M&L for PCC Type C2 1:3:6 (40 mm graded aggregate) Cement concrete in foundations, filling and mass-concrete complete all as specified & directed by Engr-in-Charge.
Removal of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above or below the starting point complete all as specified& directed by Engr-in-Charge.
Cutting holes in stone walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 exc half n exc one brick wall complete all as specified& directed by Engr-in-Charge.
M&L for angle or other section with gusset plates, rails, braces ,stairs (framed) including stringers, treades, landing, balusters, hand rails confirming to FE 290 Gde E -165 etc, including cleats,brackets, etc complete all as specified & directed by Engr-in-Charge.
M&L painting to new or previously untreated steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chromic primer including preparation of surfaces.
M & L for of concealed point wiring complete with PVC insulated and unsheathed FRLS cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit ISI marked medium grade not less than 20 mm dia, with MS stove enamelled sunken boxes (normal and modular type as required) including earth dolly with plastic laminated sheet top cover (cover plate with frame in case of modular) of approved make and colour including 1.5 sqmm multi stranded FRLS copper conductor cable of green colour as continuous earth wire with lugs and accesseries and making good disturbed surfaces of walls/floor etc complete all as specified and directed for the followings :- One light / fan point controlled by one way switch
All as per above item No-34 here in before but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, FRLS cable for 15 Amp socket outlet on independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and as directed.
S&F socket outlet 2-in-1, 6 pin 5 amp and 15 amps all as specified and directed.
S&F switch piano type 5 amp one way ISI Marked complete all as specified and directed by Engineer-in-Charge.
S&F switch piano type15 Amps one way ISI Marked complete all as specified and directed by Engineer-in-Charge.
S & F of sub main wiring with PVC insulated, FRLS, unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 6.0 sqmm (Nominal area) drawn in and including PVC conduit of suitable size as directed with and including one run of 6.0 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green colour as continuous earth wire including lugs etc connected and tested complete all as specified and as directed. Note: (i) Two runs of 6.0 sqmm cable and one run of 6.0 sqmm cable of earth continuity conductor and conduit shall be a unit length.
S&F of sheet metal enclosure double door suitable for SPN distribution boards when MCBs to be used having 200Amp rated bus bar 8 ways 240 V complete all as specified and as directed. Make-Havells/Indo asian/Legrand
S&F MCB SP 5 to 32 Amps, 240 volts curve 'B',breaking capacity 10KA, all as specified.
S&F MCB SPN 16 to 40 Amps, 240 volts, curve 'B', breaking capacity 10 KA, all as specified.
M& L for earth continuity conducted or main earthing lead fixed to wall/ceiling on batten or recess or chases or buried in ground or drawn in conduit/pipe or other directed situation for earthing etc as required 20x3 copper strip all as specified and directed. Note- Two lengths of strip shall be jointed together by overlaping through brazing
S&F SMC/DMC insulator for seperation of earth strip from wall /ceiling including fixing aceessoriese such as nut bolt etc complete all as specified and directed.
S&F heat shrinkable insulation sleeves for earth strip protection of size 20x3mm fixed to wall complete all as specified and directed.
Supply installation commissioning and testing of advance maintenance free enviroment friendly ring earthing system each set consisting of 3 nos of 10 feet long 17.2 mm dia earth electrode made of high tensile carbon steel circular rods moleculerly bound copper on outer surface ( min copper bonding thickness 250 microna) with terminals to connect incomung strip with 3 bags ( 60 kg each) of enviroment friendly portland cement based backfill compound ( Resistivity below 0.15 ohms) for each bore as per manufacturing instruction with ROHs test certificate for each 150x25x6 mm copper bar with 4 hole shall be exothermic welding on top to copper rod to terminal laid in a bore of dia 300 mm which inner dia of size 150 mm fill with backfill material and outer bore filling with 100 kg Bantonite in each bore . 25x3 mm copper strip shall be used to interconnect the earths and to make the ring and earth pit cover polypropylene (300mm x 300mm) duly enclosed in PCC pit of size 600 x 600 x 100 mm shall be included in the scope of work. NOTE- 1. Earthing shall be tested after completion of work by contractor in presence of Engr-in-Charge and proper record shall be kept duly signed by all concerned on testing if the earth resistance result is not less than 1.0 ohms than the earthing will be redone at no extra cost to Govt.. 2. The copper strip from earthing to and upto eqpt shall be measured and paid seperately under relevent items. 3. Test point measured and paid seperately.
M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louver complete with making arrangement for fixing of exhaust fan on steel/Aluminium frame window/ making opening in brick wall as per site requirement and also making good to disturbed surfaces as per matching to existing complete all as specified and as directed by Engr-in-Charge Make :- Crompton./ Bajaj/ Orient
S & F of Regid non-metallic PVC conduit 25 mm (external dia) ISI marked (on surface) incl of all accessories and all fittings such as Tees bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers lock nuts, saddles, pipe hook etc complete all as specified and as directed.
S&F 10 KVA single phase Naturally Air cooled servo controlled voltage stabilizer confirming to BIS 9815: Part1:1994 affirming 2014) copper wound dimmer and transformer, metallic body duly power coated digital display type relay free input voltage 160V-260V,Output voltage stabilized 240V +- 1% , Rate of correction 8 Volt/second Efficiency more than 95% with Over load/Short Circuit protections , High/Low voltage cut off,over temperature cut off,Bypass arrangement for emergency , input/output voltage/over current/frequency indicator, fitted with earthing terminals complete all as specified and directed.
S&F isolation transformer 5 KVA single phase 50 Hz , Copper wound , Air cooled , class of insulation B ,metallic body duly powder coated designed for input Voltage range 220 to 240 and output voltage range 220 to 240 ,Ratio 1:1 , indoor type IP 42, efficiency more than 95 % , separate neutral bushing shall be brought out for earthing Potential difference between neutral to earth less the one volt with all standard fittings like digital temperature meter , adequate number of cooling radiators , lifting hooks one set , Earthing terminal complete with Over load /short circuit protection complete all as specified and directed.
M&L for brazing of copper strip of size 20x3 through copper rod of suitable size and combination of oxygen acetylene gas cylinder. Joint must be able to withstand high tensile strength and properly done without any deffect or without any crack complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.0 sq mm 2 core complete all as specified and directed
Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 25 mm dia suitable for 0.4 mpa working pressure including making good the disturbed surface complete all as specified and directed.
S & F of circuit wiring with PVC insulated, FRLS, unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 2.5 sqmm (Nominal area) drawn in and including PVC casing capingt of suitable size as directed with and including one run of 2.5 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green colour as continuous earth wire including lugs etc connected and tested complete all as specified and as directed. Note: (i) Two runs of 2.5 sqmm cable and one run of 2.5 sqmm cable of earth continuity conductor and conduit shall be a unit length.
S&F of sheet metal enclosure factory made shutter type distribution boards 2 way when MCBs to be used having 2 ways 240 V complete all as specified and as directed.
S&F MCB SPN 06 Amps, 240 volts, curve 'B', breaking capacity 10 KA, all as specified.
S&F bell push flush type 5 amp one way ISI Marked complete all as specified and directed.
M&L for fixing PVC gang box for mounting one switch of 5 Amps including all accessoriese complete all as specifies and directed.
M&L for fixing PVC gang box for mounting one switch of 5 Amps and one socket of 5 Amps including all accessoriese complete all as specifies and directed.
S & F of circuit wiring with PVC insulated, FRLS, unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of suitable size as directed with and including one run of 1.5 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green colour as continuous earth wire including lugs etc connected and tested complete all as specified and as directed. Note: (i) Two runs of 1.5 sqmm cable and one run of 1.5 sqmm cable of earth continuity conductor and conduit shall be a unit length.
S&F in replacement socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engineer-in-Charge.
S&F LED energy efficient 3 watt flexible desk mounted reading lamp with brightness controle button with operating frequency 50 Hz , 230 Volts, warm white with fixing arrangement such as modular box sheet plate frame screw etc complete all as specified and directed.Make- Legrand Cat No 6773 16.
Excavating of disintegrated soil in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for under ground cable etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out of disintegrated rock complete.
M & L for dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying ( total 23 cm ) and compaction till 18 cm thick for measurement purpose complete all as specified and directed .
Material labour for common burnt clay bricks, sub class 'B' grade laid in trenches for protection of UG cables perpendicular to the direction of the cables complete all as specified and as directed by Engr-in-Charge
M&L for flame proof wiring with single core PVC insulated and unsheathed 1100 volt grade FRLS electric cable with multi stranded copper conductor of size 2.5 Sqmm phase and neutral drawn in and including ERW rigid steel stove enameled black conduit heavy duty ISI marked of size 20mm dia on surface/wall/ceiling including all flame proof conduct fittings and accessories such as tees junction boxes, bends duly tested by CMRI Dhanbad suitable for one light /fan point controlled by one flame proof rotary switch SP one way and including drawing continuous earth wire FRLS PVC insulated unsheathed 1100v grade cable with stranded copper conductor of size 2.5 Sqmm and connected to earth dolly complete all as specified and directed by Engrs-in-Charge.
Supply and fixing flame proof/weather proof direct entry type rotary switch single pole on & OFF rotary motion switch in cast aluminum alloy LM-6 enclosure epoxy powder coated single pole 230Volts 10 Amps, AC ON/OFF switch operated externally by Knob having 02 Nos of M-20 cable entries, earthing terminals suitable for mounting on Wall/Steel structure etc all as specified and directed. Make : Flexpro/Sudhir/Baliga/Shyam.
Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed size. Note :- (a) All fittings shall be ISI marked and shall have approval of CMRI Dhanbad . (b) Original Test certificate of Manufacturer shall be produced by Contractor . Make : Flexpro/Sudhir/Baliga/Shyam.
Supply and fixing flame proof exhafust fan 300 mm sweep, 230 Volt, Single phase including grounting Nuts, bolts and making electrical connections flame proof Conduit, including making of suitable size hole in wall/aluminium/wooden window & making good to disturbed surfaces as per matching to existing. complete all as specified and as directed by Engr-in-Charge Make : Flexpro/Sudhir/Baliga/Shyam.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engr-in-Charge. Make- Orient/Crompton/Bajaj
Supply & fix wall mounting fans 230 volts single phase oscillating 400 mm sweep suitable for wall mounting complete all as specified and as directed by Engr-in-Charge. Make- Orient/Crompton/Bajaj
Supply and fix electric water heater, storage type with SS tank and outer body made out of ABS & PP, heating element of 2 KW storage capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, SS connection piece of suitable length etc complete all as specified and as directed by Engr-in-Charge. Make : Racold/Crompton/Bajaj
Supply and fix steel body desert cooler electric driven single phase having 18" exhaust fan motor with nominal air flow capacity of 5000 CuM per hour including submersible water pump heavy duty with water storage capacity upto 140 Ltrs with wood wool pads 03 sides over flow pipe drain pipe water filling point with automatic float valve cooler body made of powder coated metal sheet 3.15 mm thick complete all as specified and directed.
S&F of single pole and neutral enclosure with 2 pin and metal earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed.Make-Havells/Indoasian/Legrand
S&F of ceiling rose surface bakelite 63 x50mm three terminals complete all as specified and as directed.
M&L for Hard core, broken bricks gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L 75 mm thcik PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in floors below tiles complete all as specified and directed.
M&L for Cement concrete as in coping rounded or chamfered on side edges using type BO 1:2:4 (12.5mm graded aggregate) complete all as specified and directed.
M&L for Spreading, levelling and ramming of sand filling under paver block complete all as specified and as directed.
S&F for Machine pressed pre polished & moulded, precast concrete interlocking paver block any shape colour and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade laid over sand cushion complete all as specified and as directed.
M&L renderinng 15 mm thick on fair faces of brick work in cm 1:4 and finished even and S fair complete all as specified and directed.
M&L for preparation of new surface of wall and applying two coat of cement base paint on wall complete all as specifed and directed
M&L for mild steel TMT bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia as specified
Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
M&L for reinforced cement concrete (nominal mix) (124) type B1 (using 20mm graded stone aggregate) in lifting beams/band complete all as specified.
M&L for Formwork to sides and soffits offloor or roof beams, beam haunchings,girders. S bressummers, lintels, cantilevers, shelvesincluding sup- ports, overhangs.etc. also splays between floors and beams,
S&F Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate supplied and fixed specified and directed.
S&F, 40mm thick Flush shutter, solid core construction, with block board core and S plywood face panels, commercial type on both sides.
S&F MS butt hinges 100mm long medium weight cold rolled complete all as specified and directed.
S&F aluminum anodized barrel tower bolt 200mm long of extruded section complete all as specified and directed
S&F aluminum anodized sliding door bolt 300mm long with hasp and staples (bolt type) E and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of
S&E aluminum bow handle "D" type anodized 150mm long complete all as specified and directed
M&L for preparation of new surfaces of wood and wood based materials of any Sqm descriptions not otherwise described over 10Cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for one coat of synthetic enamel paint to new steel surfaces door, windows, of any description over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
S&F MS work as in hold fast and similar small articles conforming to Fe-290, Gde E- Kg 165 complete all as specified
M&L for PCC (1:3:6) type C-1 (Using 20mm graded stone aggregate) as in cills, Cum copings, bed blocks for hold fasts and the like complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu m. getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm
M & L for Cement concrete in foundations, filling and mass concrete type B2 (1:2:4) 40mm graded aggregate
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410-W(Gde-E-250) quality a as specified and directed by Engr-in-charge
S & F pre-painted galvatume aluminium Zince coaing GI based corrugated stee sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specfied
M&L for brickwork with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4
S&F for 2 Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275
Cutting upto a depth of 2.5cm and add for every 2.5 CM extra or part thereof in depth (upto 15cm depth) into concrete walls and trimming surface as required, girth exc. 30cm
RADHA ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .