Karnataka

Active

Works

Other Works

Painting to Rain shelters, Lawn guards, flower pots & desiginer lights, Cauveramma Statue Area, Ticket Counter Entrance, Medians, Kerb Stones, Bridge Parapets, Clearing of debries, Repairs & maintence of Toilets at Brindavan Garden, KRS, During Dasara Festival - 2026

Cauvery Neeravari Nigam Limited

CNNL KRS Div KR Sagar | Shivamogga, Karnataka

Amount: ₹67.5 LCloses: 1 Oct 20264d left

Timeline

Published22 Sept 2026
Closes1 Oct 2026
Bid Opening3 Oct 2026

Tender Value

₹67.5 L

EMD Value

₹1.4 L

Closing Date

1 Oct 2026, 5:30 pm4d left

Tender Inviting Authority

Office Inviting Bids

Cauvery Neeravari Nigam Limited

Contact Person

SHWETHA

Mobile Number

Work Description

Painting to Rain shelters, Lawn guards, flower pots & desiginer lights, Cauveramma Statue Area, Ticket Counter Entrance, Medians, Kerb Stones, Bridge Parapets, Clearing of debries, Repairs & maintence of Toilets at Brindavan Garden, KRS, During Dasara Festival - 2026

Tender Information

Tender ID

CNNL/2026-27/OW/WORK_INDENT5508

Reference Number

CNNL/2026-27/OW/WORK_INDENT5508

Tender Type

Open

Product Category

Other Works

Form of Contract

Two Tender Document System(Two Cover)

Location

CNNL KRS Div KR Sagar

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredContract Registration Certificate

RequiredGST Registration Certificate

RequiredAnnual Financial Turnover Certificate from CA with UDIN AND ITR of last Five years

RequiredSimilar nature of work done Certificate

RequiredWork done certificate for execution of quantities

RequiredIncome Tax details

RequiredLine of credit certificate in required format

RequiredBid capacity details

RequiredSite Inspection Certificate from Concerned AEE Shall Be Obtained and uploaded.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.-NOT APPLICABLE

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Conditional tenders will not be accepted.

The intending bidder should furnish the certificate of registration issued by state/ central Govt

The Tenderer should furnish the Name of the individual / firm/ Company with address and telephone number with place of registration, year of incorporation etc.

The Intending bidder are advised to visit the site of work and access the tender documents well in advance.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs

The tender processing fee will not be refunded

The employer is not responsible for any delay in accessing Karnataka Public Procurement Portal.

The requisite Earnest Money Deposit (EMD) Through ONLINE only With validity from the date of opening of the tender. The tender schedule will be issued to the applicants who make payment through ONLINE only. Tenders received without valid EMD through e- payment will be rejected. Under this section of qualifying criteria the tenderer should furnish capacity details / format.

All the formats prescribed in the bid document shall be filled by the bidders in a complete manner. Incomplete formats may constitute sufficient reason at the discretion of CNNL for rejection of the bid

All scanned documents to be uploaded shall be in original and the Executive Engineer will verify the original documents at any stage before recommending for approval. Bidders should produce their original documents for verification during office hours related to uploaded documents in e-portal within 3 days of opening of technical Bid

Further particulars, if any, required by the bidders can be had from the office of the Executive Engineer, KRS Division, Krishnarajasagara, during office hours on all working days. It may be noted that if any of the calendar of any event mentioned above happen to be General Holiday / Declared holiday, the next working day will hold good for the respective events

Defect liability period is 1 monthfrom the date of completion of the entire work, after issuing of work completion certificate from CNNL.

Tenderers shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by the Government of Karnataka.

The tenderer should furnish the Name of the individual / firm/ Company with address and telephone number with place of registration, year of incorporation etc

The application made by the firm / company shall be signed by a person holding the power of attorney, in which case the Tenderer should furnish a copy of power of attorney shall be submitted

Necessary certificates should be signed by an officer not below the rank of the Executive Engineer or equivalent competent authority and should be countersigned by the superior officer not below the rank of Superintending Engineer or equivalent competent authority.

The intending Bidder/firm/company shall provide accurate information on the related form about any litigation or Arbitration resulting from contracts completed or on going under its execution over the last five years. The consisting history of awards against the tenderer may result in failure of the application.

Tenderer should furnish a copy of the Income Tax Return for the last five financial year (2021-22 to 2025-26)

The intending Bidder/firm/company shall provide the audited balance sheets or other financial statements acceptable to the employer for the last five years (2021-22 to 2025-26) and must demonstrate the current soundness of the applicants financial position and indicate its prospective long term profitability. If deemed necessary the employer shall have the authority to make enquiries with the applicants bankers.

The Tenderer should furnish a valid copy of GST Registration Certificate.

Employees provident fund registration certificate along with copy of recent paid challan is to be furnished.

Employees Provident fund Registration Certificate a)In respect of Contractors who are not registered with the EPF (Employees Provident Fund) authorities, the contractors should produce an undertaking that he shall within 7 days of the close of every month submit to the Executive Engineer, KRS Division, Krishnarajasagara, a statement showing the recoveries of contributions in respect of employees employed are through in and shall also furnish under the provision of the scheme to the commissioner, EPF b) However, having given an undertaking to this effect if the contractor does not furnish the information, the Nigama will deduct the necessary amount from the amount due from the contractor.Not withstanding the above, the contractor will be liable for any consequential penalty /damages levied by the EPF authorities.

The rates quoted by the contractor must be inclusive of all Taxes, etc., (including GST). The contractor is also required to pay quarry Fees, Royalties, Octroi Dues levied by the state Government or any Local body or an authority and ground rent, if any, charged by the Executive Engineer for stacking materials. No Extra Payment on this account will be made to the contractor.

GST will be deducted as per the prevailing Govt Orders from time to time in running bill

Increase in GST shall not be paid in extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time

Materials like steel, cement etc., required for the work shall be procured by the Contractor themselves and should get the same tested by the quality control authority of CNNL/ Karnataka Research station, if not by any NABL accredited labs before use in this work.

The work includes all lead and lift / delift and work shall be carried out as per instruction of engineer-in-charge of the work. And all the specification as per relevant Indian standard codes. The rate for the specifications in the Schedule-B includes all lead and lift, irrespective of distance and height.

Royalty Charges shall be recovered as per the prevailing rates by the Department of Mines and Geology & The Intending bidder should strictly follow the Department of Mines & Geology circular no. 11189-1121 Dated:26.02.2024.

Security Deposit Will be withheld till the expiry of the defect liability period.

Building and other construction workers welfare cess The contractor shall subscribe 1.00% of gross amount of each bill payable to him in respect of contract to the building and other construction workers welfare cess as per GO No: LD 300 LET 2006, Bangalore, dated: 18-01-2007. The amount of subscription will be recovered out of payable amount to him in each bill.This component is deemed to have been included in the quoted rate / Item rate.

The contractors should adhere to the accepted action plan submitted by him under any circumstances without linking to the pending payment of the work.

Sub leasing /subcontracting in any form is prohibited. Bids of bidders with track record of Subleasing/subcontracting are liable for rejection.

The quarries considered are for the estimate purpose only. The intending bidders shall visit the site, identify the quarries, ascertain availability for the quantity and quality of the materials required for the work and shall quote his rates accordingly. No extra claim whatsoever will be entertained in this regard.

On account of restrictions on sand mining and scarcity of availability of sand, as an alternative the use of manufactured sand (M-sand)confirming to relevant IS specifications may be allowed during the remodeling work

The rates includes all leads and lifts and work shall be carried out as per the instruction of Engineer-in-charge. All specifications are as per relevant IS codes in vogue and Indian Road Congress. The rates for the specification in the Schedule-B includes all lead and lifts irrespective of the distance and height, no extra claim will be entertained for additional lead and lifts.

The contractor should have capacity of deploying centralized batching plant along with The transit mixture during execution of concrete works for both structures and lining.

Successful Bidder should submit the PERT Chart at the time of Execution of Agreement.

Successful bidder should execute work agreement within 20 days from the date of issue of Letter of acceptance, failing which his tender will be cancelled on Risk & Cost basis & his EMD will be forfeited

Related to qualification condition No :2, Idle charges for men & machineries for non- progress period delayed due to any reasons will not be paid.

As per FD GO dated 26.03.2019, NSIC exemption for EMD is not accepted.

CNNL reserves the right of rejecting all or any of the tenders without assigning any reasons.

Typo graphical errors if any will not be the ground for any claims by the contractor.

The undersigned reserves the right to either postpone or to cancel the entire process of tender.

Conditions as per bid document.

The bidder shall possess valid EPF and ESI Registration Certificates and upload the same along with the Technical Bid

Site Inspection Certificate from Concerned AEE Shall Be Obtained and uploaded

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

The intending bidder/firm/company should have Satisfactorily completed (at least 90% of the contract value), as prime contractor at least one similar work such as maintenance of buildings of value not less than Rs.34.00Lakhs. (usually not less 50% estimated value of contract during the last five financial years from 2021-22 to 2025-26). Note: The certificates should be obtained from the competent authority that is not below the rank of the Executive Engineer or equivalent rank officer (The cost of completed works of previous years will be given a weightage of 10% per year based to bring them to 2026-27 level rupee price value).

Work Done Certificate

The intending bidder/firm/company should have Executed in any one year the following minimum quantities of work in the last five years satisfactorily (2021-22 to 2025-26): Painting Work -15770SQM, Steel -1.20 T, All grade of Cement concrete-46.00CUM NOTE: The criteria above applies to the Individual bidder/Firm also. Certificate regarding the same duly signed by an officer not below the rank of the Executive Engineer should be submitted along with the technical bid.

Work Done Certificate

Capabilities of Vendor

List of key technical personnel required for the work is as under: 1)Civil Engineering/ Diploma with Min 2 years experience-1no.

Others -- Others -- Key person

Financial Status

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e, 2021-22, 2022-23, 2023-24 2024-25 & 2025-26, achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs 67.00 Lakhs (usually not less than the two times estimated annual payment under this contract during the last five financial years from 2021-22 to 2025-26). Note: Audited balance sheet certified by practicing Chartered Accountant shall be furnished. (Additional weight age at 10% for each year will be given for turnover to bring it to 2026-27 price level).

Audited CA Certificate of Annual Turnover

The intending bidder/firm/company shall furnish details of liquid assets and / or availability of credit facilities of not less than Rs.21.00 Lakhs(Credit lines/letter of credit/certificates from any Nationalized banks for meeting the fund requirement etc. i(usually the equivalent of the estimated cash flow for three months in the peak construction period)

Line of Credit

Tender Capacity calculation in prescribed format

Others -- ongoing and existing commitment details as per prescribed format

Work Locations

Fee & Financial Details

Tender Fee Amount

₹1,690

EMD Fee Amount

₹1.4 L

Important Dates

Last Activity

22 Sept 2026

Published

22 Sept 2026

Bid Opening

3 Oct 2026

Download Ends

25 Sept 2026

BOQ Preview

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade,Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade,Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and fore...

•

Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofi...

•

Clearing and Grubbing Road Land.Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlie...

•

Supply and installation of retro- reflective Chevron signboards of 600x450mm made out of cube corner micro prismatic grade sheeting confirming to Type XI standards of IRC 67 2022 & ASTM D 4956-09 spec...

•

Supplying & fixing of retro fit type LED bulb......W with OPAL acrylic diffuser comprising of LED source with CCT65 0 degree K, CRI greater than 70%. efficacy greater than 80 lumen per W, life greater...

•

Cleaning Seftic Tank of more than 100 users capacity as per details and instructions.(While cleaning septic tank all safety and precautionary measures to be taken,Standard Operating Procedure to be ad...

•

Providing Hydraulic Excavator of 0.9 m3 bucket on hire basis

•

Providing Tractor-Trolley on hire basis

•

Removing and resetting disturbed dry rubble / size stone pitching 250 to 450 mm thick including packing and wedging with stone chips, finishing surface with all other ancillary operations complete.

•

Providing Flush/ Ruled pointing, Pointing on stone work with cement mortar 1 to 3 (1 cement , 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as pe...

•

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Double Arm Bracket with 1500 mm Stand...

•

Fabricating, supplying and erection of...ms long hot dip Galvanized Octagonal hot dip Pole with BSEN10025 grade S355JO steel plate for shaft, IS2062 for base plate with door opening arrangements, incl...

•

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

•

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 3.5 cor...

•

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

•

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Work of servicing, leak arresting and oil filtration upto 400 KVA power transformers as specified below, a. Removing cable connection of transformer after isolating the supply dismantling the cable co...

•

Supply, installation, testing and commissioning of 80 W semi-integrated solar LED street light with minimum 110 lm/W efficacy, approximately 7,700 lumens, 50,000 hours LED life and IP65 protection. Th...

•

Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. For thickness of tiles 10 mm to 25 ...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...

•

Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 g

•

Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 90 mm long, weighing not less than 93 g

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

•

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...

•

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.

•

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

•

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

•

Supply of round/square recess/surface mounted rolling typeLED Down light with ...... W GU 10 LED Lamp Rib Fabricatedfrom diecast aluminium with white powder coated prewired tomains connector & has swi...

•

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1 to 4 (1 cement, 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm interna...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Finishing walls with textured exterior paint of required shade,Old work (Two coats on existing cement paint surface applied @ 3.28 l/10 m2 including preparing the surface after thoroughly cleaning the...

•

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...

•

Applying priming coat, With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...

•

Supply of HP brand All-in-One Personal Computer comprising an internal CPU, display with integrated webcam, microphone array and speakers, wired keyboard and mouse, connection cables and power adapter...

•

Supply of HP brand A4 and Legal-size monochrome multifunction laser printer with print, scan and copy functions, complete with power cord/adapter and connecting USB cable. The machine shall employ ele...

•

Supply of 1.0 kVA UPS with MOSFET-PWM technology, minimum 60% efficiency and 15 minutes full-load backup, complete with 2 Nos. 7 Ah SMF-VRLA batteries conforming to JISC-8702 Parts 1, 2 & 3. The UPS s...

•

Providing & fixing upvc ventilator with Exhaust Turbo speed fan with 5 blades (300mm x 300 mm & above sized fan) with copper motor having mounting arrangements as per direction of Engineer in charge o...

•

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same with CM 1 to 4 etc. comp...

•

H.P. or L.P. ball valve with polythene floats, 25 mm dia

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

•

Supplying PVC ringtite pipes conforming to IS 4985 2000 with latestamendments and conveying to worksite, rolling and lowering intotrenches, laying true to line and level and perfect linking at joints,...

•

SS StainleSS Steel Grab Bar 600 mm Long - Economy

•

Providing and fixing German Polyamide flexible connection hose with winged nuts 450mm with all concealed fitting arrangements & all necessary accesories complete - Class Economy

•

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

•

Providing Mobile Hydraulic Crane 5 t capacity on hire basis

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

5508-rain shelters.doc

Tender Document • 3.30 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

Active

Works

Other Works

Painting to Rain shelters, Lawn guards, flower pots & desiginer lights, Cauveramma Statue Area, Ticket Counter Entrance, Medians, Kerb Stones, Bridge Parapets, Clearing of debries, Repairs & maintence of Toilets at Brindavan Garden, KRS, During Dasara Festival - 2026

Cauvery Neeravari Nigam Limited

CNNL KRS Div KR Sagar | Shivamogga, Karnataka

Amount: ₹67.5 LCloses: 1 Oct 20264d left

Timeline

Published22 Sept 2026
Closes1 Oct 2026
Bid Opening3 Oct 2026