Construction of CC road at Arablus Kanalus Setalus Padana approach road Km. 0/0 to 12/0 (Padana approach road km 0/0 to 0/800, 7.0 mtr. widening), Dist.: Jamnagar.

Name of Work : Construction of CC road at Arablus Kanalus Setalus Padana approach road Km. 0/0 to 12/0 (Padana approach road km 0/0 to 0/800, 7.0 mtr.

widening), Dist.: Jamnagar.

BILL OF QUANTITIES

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

1 Demolition including stacking of serviceable materilas and disposal of unserviceable materials 627.000 Cu.Mt. 1108.12

with all lead and lift. (i) R.C.C. work

2 Box cutting the road surface to proper slope and chamber for making a base for road work 2073.000 Cu.Mt. 111.85

including removing the excavated stuff and depositing on the road side slope as directed upto

3 Providing and laying compacted WBM 150 mm thick of grading I , B.T.M.C.metal of size of size 45 889.000 Cu.Mt. 1100.68

to 90 mm in required layers including using 22% stone screening 13.20 mm size and 7% stone

dust as filler including spreading watering and consolidation by vibratory roller etc complete.

4 Providing and laying compacted WBM 150 mm thick of grading II , B.T.M.C.metal of size of size 889.000 Cu.Mt. 1100.90

45 to 63 mm in required layers including using 13% stone screening 13.20 mm size and 7% stone

dust as filler including spreading watering and consolidation by vibratory roller etc complete.

5 Providing and filling in foundation with ordinary Cement concrete M-100 mix and providing 585.000 Cu.Mt. 3362.25

necessary vertical pin headers including formwork, vibrating, ramming and curing complete.

6 Providing and casting in situ controlled trimix cement concrete M-250 for average 250 mm thick 1443.000 Cu.Mt. 6057.98

road work laid as directed including providing and laying M.S. side rail of road thickness with

necessary nut bolts plates fixing as per width applying plate vibrator (elcetric or diesel on

channel compressor with vacumme dewatering system by using all necessary equipment and

materials and machinery such running erected vibrator on prelaid M.S. channel for leveling

vacuum pump floating and power travelling using Floor hardner of Approved make, cutting the

joints at regular interval and with filling the joints with bitumin as directed by Engineer In

7 Providing and fixing in position steel bars of grade FE-500D (TMT) for tempreture reinforcement 32.300 M.T. 73242.63

for following items including cuting hooking, tying etc. complete as required and approved

For Plain concrete piers, abutment, returns, RCC retaining wall with foundation etc.

8 Supplying , stacking, spreading , rolling and watering Hard Murrum as directed for side shoulder 228.000 Cu.Mt. 318.15

as directed with all lead & lift.

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

9 Cautionary Warning Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4.000 No. 3906.19

4mm ACP (Aluminum composite Panel); size 90 x 90 x 90 cms. equilateral triangle as per design

of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat of

epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr

long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and

white bends. The details of symbol foreach board shall be as per theinstruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product offered shall be submitted

(A) Class-B Type-4 Retro Reflective sheeting

10 Village Name Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm 2.000 No. 6397.43

ACP (Aluminum composite Panel); size 90x60 cms. rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching; coated with one coat of epoxy primer and two

coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D- 4956 and latest M.O.S.T.Specifications; 3.3mtr long

stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and

white bends. The details of symbol or inscription/letters / numerals for each board shall be as

per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x

45 x 60 Cms. for each leg.including excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 10 years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab

for the product offered

shall be submitted by contractor.

(A) Class-B Type-4 Retro Reflective sheeting

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

11 Direction sign (Junction board):-Providing and fixing sign boards made out of 2mm aluminium 1.000 No. 21287.51

sheet / 4mm ACP (Aluminum composite Panel); size 244x122 cms. rectangular as per design of

IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat of

epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 4.0mtr

long (2 Nos.) stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 50 x 50 x 5mm; painted with bestquality epoxy

coatings in black and white bends. The details of symbol foreach board shall be as per

theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg.including excavation, curing etc.complete under the supervision of engineer

in charge. A warranty for 10 years for the Retro reflective sheeting from original manufacturer &

a certified copy of 3 year outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor.

(A) Class-B Type-4 Retro Reflective sheeting

12 Facility Informatory Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 2.000 No. 3990.64

4mm ACP (Aluminum composite Panel); size 80 x 60 cms rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D- 4956 and latest M.O.S.T.Specifications; 3.6mtr long

stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and

white bends. The details of symbol foreach board shall be as per theinstruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product offered shall be submitted

(A) Class-B Type-4 Retro Reflective sheeting

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

13 Regulatory/Mandatory signs :Providing and fixing sign boards made out of 2mm aluminium sheet 2.000 No. 3540.12

/ 4mm ACP (Aluminum composite Panel); size 60 cms Dia Circle as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching; coated with one coat of epoxy primer and two

coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D- 4956 and latest M.O.S.T.Specifications; 3.6mtr long

stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and

white bends. The details of symbol foreach board shall be as per theinstruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product offered shall be submitted

(A) Class-B Type-4 Retro Reflective sheeting

14 Road marking with hot applied thermoplastic paints with reflectorising glass beads on bitumin 280.000 Sq.Mt. 367.72

surface providing and laying a hot applied thermoplastic compound 2.5 mm thick including

reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is excluding of surface

applied glass beds as per IRC:35-2015. The finished surface to be level, uniform and free from

streaks and holes. zebra patta / bump patta lane/center line/ edge line/cut patta. The white

color marking should provide liminance coefficinet on cemend road shalll be min

mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during the service life during the day

time. The marking should meet the performance criteria for night time reflectivity, wet

reflectivity and skid resistance as mentioned in the section-15 of IRC 35-2015. Warrenty for retro

reflectivity shall be 2(Two) years.

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

15 Cat Eye / Road Stud/RPM: Supplying of Molded Twin Shanks Raised Pavement Markers made of 550.000 No. 326.23

polycarbonate and ABS moulded body and reflective panels with Micro prismatic lens (No Glass

bead lens) capable of providing total internal reflection of the light entering the lens face and

shall support a load of 13635 kgs. tested in accordance to ASTM D 4280 Type H and complying to

Specifications of Category A of MORTH Circular No RW/NH/33023/10-97-DO Ill Dt 11.06.

The height, width and length shall not exceed 20 mm, 130 mm and 130 mm and with minimum

reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/-5 degree. The

strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/-

mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kgf.

Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using

epoxy resin based adhesive as per manufacturer's recommendation and The color of the marker

should be as per the IRC 35-2015 and as directed by Engineer-in-charge.

16 Providing and fixing 5th Kilometer stone of precast C.C. 1:2:4 including necessary reinforcement 1.000 No. 1935.15

as per I.R.C. type design in C.C. 1:4:8 including painting,lettering etc. complete (For N.H., S.H. and

17 Providing and fixing Hectometer stone of precast C.C. 1:2:4 including necessary reinforcement as 4.000 No. 356.50

per I.R.C. type design in C.C. 1:5:10 including painting and lettering etc. complete.

18 Providing and fixing Guard stone of precast C.C. 1:2:4 including necessary reinforcement as per 100.000 No. 327.69

I.R.C. type design fixing inEarth including white washing etc. complete.

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

19 Hazard Marker Sign :-Providing and fixing sign boards made out of 1.5mm aluminium sheet / 2.000 No. 3518.69

3mm ACP (Aluminum composite Panel); size 90x30 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D- 4956 and latest M.O.S.T.Specifications; 1.8mtr long

stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and

white bends. The details of symbol foreach board shall be as per theinstruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product offered shall be submitted

(B) Class-B Type-4Retro Reflective sheeting

20 Chevron sign :-Providing and fixing sign boards made out of 1.5mm aluminium sheet/3mm ACP 14.000 No. 3711.75

(Aluminum composite Panel); size 60x50 cm as per design of IRC-67-2012. Pre treated with

phospheting process & acld etching; coated with one coat of epoxy primer and two coats of best

quality epoxy paint reflectorised with Micro Prismatic Grade retro refiectivesheeting of Type-11

as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.3 mtr long stand post of 75 x 75 x 6mm

/ 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 50 x

x 5mm; painted with bestquality epoxy coatings in black and white bends. the details of symbol

ar inscription/ numerals for each board shall be as per the instruction of engineer in charge.The

fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including excavation,

curing etc.complete under the supervision of engineer in charge. A warranty 10 years for the

Retro reflective sheeting from originaa manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product offered shall be submitted by

(A) Class-B Type-4 Retro Reflective sheeting

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

21 Type - A, "W" : Metal Beam Crash Barrier (Providing and erecting a "W" metal beam crash barrier 50.000 Rmt. 3468.34

comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level,

fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m

high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip

process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical

post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811)

22 Diversion Ahead Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet/4mm 2.000 No. 9867.07

ACP (Aluminum composite Panel); size 180x60 cms. rectangular as per design of IRC-67-2012.

Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro

reflectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.1 mtr long

stand post (2 Nos.) of 50 x 50 x 5mm/SONB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black

and white bends. The details of symbol foreach board shall be as per theinstruction of engineer

in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the supervision of engineer in charge. A

warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified

copy of 3 year outdoor exp ure test report from third party test lab for the product offered shall

be submitted by contractor.

(A) Class-B Type-4 Retro Reflective sheeting

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

23 Men at work (Heavy) sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 2.000 No. 12211.91

4mm ACP (Aluminum composite Panel); size 120cm x90cm rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6 mtr long

stand post (2 Nos.) of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 50 x 50 x 5mm; painted with bestquality epoxy coatings in black

and white bends. the details of symbol or inscription / numerals for each board shall be as per

the instruction of engineer in charge.The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg.including excavation, curing etc.complete under the supervision of engineer

in charge. A warranty for 10 years for the Retro reflective sheeting from original manufacturer &

a certified copy of 3 year outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor.

(A) Class-C Type-11 Retro Reflective sheeting

24 Excavation for Foundation of Piers, Abutment foundations in sand, gravel, clay, soft soils, 113.000 Cu.Mt. 486.77

murrum, hard murrum, boulders, very stiff or sticky clays, soft rock, etc. including shoring,

strutting and dewatering as necessary and depositing of the excavated stuff as directed for all

lead, back filling the excavated pit by approved excavated material etc. complete as per

Depth upto 3.0 m below GL

25 Providing and casting in situ ordinary cement concrete M10 for RCC Raft and cut-off walls 2.100 Cu.Mt. 3245.56

including necessary shuttering laying, vibrating, ramming and curing complete.

26 Providing and casting in situ ordinary cement concrete M15 for Bedding of Pipes as per detail 23.700 Cu.Mt. 3670.12

drawing, including necessary shuttering laying, vibrating, ramming and curing complete.

27 Supplying and fixing reinforced concrete heavy duty non pressure pipes with collars for culverts 22.500 Rmt. 2108.86

including setting and joining the pipes in C.M. 1:2 watering and laying (To level of slops of I.S.

458 / 1971 Class NP3 casted by vertically vibrated technology of following internal diameter.

28 Providing and placing in position M20 grade Ordinary cement concrete for RCC work in Head 42.500 Cu.Mt. 4219.78

walls and Protection wall including form work, shuttering, mixing, placing, compaction, curing

etc. complete in all respects.

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the estimated rate mentioned above. Amount of

my /our tender works out as under.

* Estimated Amount * Estimated Amount

put to tender put to tender

Deduct :…………% Below Add :………%Above

In Words …………………………………… In Words………………………………

* (Please strike out whichever is not applicable).

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

R & B Sub Division R & B Division

Jamjodhpur Jamnagar