BID DOCUMENTS FOR RENOVATION WORK OF EXISTING OF SHRIMANT MAHARANA SHRI NARANDEVJI LIBRARY AT DHARAMPUR NAGARPALIKA UNDER: - VYAVSAY VERA YEAR-2024-25 GRANT.

Total Amount Rs.

Note : 4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

SECTION-7 BILL OF QUANTITIES-171

Signature of Contractor President Chief Officer

Dharampur Nagarpalika Dharampur Nagarpalika

Daharampur Daharampur

SECTION-7 BILL OF QUANTITIES-172

DHARAMPUR MUNICIPALITY, DHARAMPUR

NAME OF WORK - RENOVATION OF EXISTING LIBRARY AT DHARAMPUR. DIST., VALSAD

Item Qty. Description Total Unit Amount

1 841.00 Removing dry or oil bound distemper by washing and scraping and

Smt. sand papering the wall surface smooth including necessary repairs

to scratches complete. 11.30 Smt.

2 252.50 Removing dry or oil bound distemper on ceiling and sloping roofs

Smt. by washing and scraping and sand papering the wall surface

smooth including necessary repairs to scratches complete.

3 17.00 Painting two coats (excluding priming coat) on previously painted

Smt. wood and wood based surface with enamel paint to give an even

shade including cleaning the of all dirt, dust and other foreign

matter. 55.36 Smt.

4 4.00 Painting two coats (Including Priming Coat) on new steel and other

Smt. metal surface with synthetic enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust and other

foreign matter. 65.31 Smt.

5 802.50 Applying two coats of Birla (White Cement based) or Asian acrylic

Smt. lappy (putty) or equivalent & two coats of primer of approved brand

and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar dropping

and other foreign matter and sand Papered smooth. 40.59 Smt.

6 550.00 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on wall

surfaces to give and even shade over and including a primer coat

with alkali resistance primer of approved brand after throughly

brushing the surface free from other foreign matter and also

including preparing the surface even and sand papered

SBD SECTION-7 BILL OF QUANTITIES-172

7 252.50 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on Ceiling

& Sloping Roof surfaces to give and even shade over and including

a primer coat with alkali resistance primer of approved brand after

throughly brushing the surface to give and free from other foreign

matter and also including preparing the surface even and sand

papered smooth.Celling

8 291.00 Finishing wall with Weather Proof Acrylic Exterior Emulsion Paint

Smt. on wall surface (two coats) to give and required shape even shade

and of approved brand and manufacturer after throughly brushing

the surface to remove all dirts, and remians of loose powdered

materials etc. complete.

9 291.00 Providing and laying damp proof course 25mm thick cement

Smt. concrete 1:2:4 (1-Cement : 2 coarse sand : 4 stone aggregate

mm nominal size) and curing complete

SBD SECTION-7 BILL OF QUANTITIES-173

DHARAMPUR MUNICIPALITY, DHARAMPUR

NAME OF WORK - RENOVATION OF EXISTING LIBRARY AT DHARAMPUR. DIST., VALSAD

Item Qty. Description Total Unit Amount

1 1059.00 Removing dry or oil bound distemper by washing and scraping and

Smt. sand papering the wall surface smooth including necessary repairs

to scratches complete.

2 297.50 Removing dry or oil bound distemper on ceiling and sloping roofs by

Smt. washing and scraping and sand papering the wall surface smooth

including necessary repairs to scratches complete. 12.89 Smt.

3 36.00 Painting two coats (excluding priming coat) on previously painted

Smt. wood and wood based surface with enamel paint to give an even

shade including cleaning the of all dirt, dust and other foreign matter.

4 10.00 Painting two coats (Excluding Priming Coat) on new steel and other

Smt. metal surface with synthetic enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust and other

foreign matter. 65.30 Smt.

5 926.00 Applying two coats of Birla (White Cement based) or Asian acrylic

Smt. lappy (putty) or equivalent & two coats of primer of approved brand

and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar dropping

and other foreign matter and sand Papered smooth. 40.59 Smt.

6 628.50 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on wall

surfaces to give and even shade over and including a primer coat

with alkali resistance primer of approved brand after throughly

brushing the surface free from other foreign matter and also

including preparing the surface even and sand papered

smooth.inside 100.55 Smt.

SBD SECTION-7 BILL OF QUANTITIES-174

7 297.50 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on Ceiling

& Sloping Roof surfaces to give and even shade over and including

a primer coat with alkali resistance primer of approved brand after

throughly brushing the surface to give and free from other foreign

matter and also including preparing the surface even and sand

papered smooth.Celling

8 430.50 Finishing wall with Weather Proof Acrylic Exterior Emulsion Paint on

Smt. wall surface (two coats) to give and required shape even shade and

of approved brand and manufacturer after throughly brushing the

surface to remove all dirts, and remians of loose powdered materials

etc. complete. 114.53 Smt.

9 430.50 Providing and laying damp proof course 25mm thick cement

Smt. concrete 1:2:4 (1-Cement : 2 coarse sand : 4 stone aggregate

mm nominal size) and curing complete

SBD SECTION-7 BILL OF QUANTITIES-175

DHARAMPUR MUNICIPALITY, DHARAMPUR

ESTIMATE FOR CONSTRUCTION OF LIBRARY BUILDING AT DHARAMPUR

PROPOSED COMPUND WALL AND ENTRANCE M.S. GATE

Item Qty. Description Total Unit Amount

1 141.00 Excavation for foundation up to 1:5 mt. Depth including

Cmt. sorting out and stacking of useful materials and

depositing of the excavated stuff up to 50 meter lead.

2 26.00 Excavation for foundation from depth 1:5 mt. to 3.0 mt.

Cmt. Depth including sorting out and stacking of useful

materials and depositing of the excavated stuff up to

50 meter lead. (a) Loose or soft soil.

3 115.00 Filing available excavated earth (excluding rock) in

Cmt. trenches plinth sides of foundations etc. in layers not

exceeding 20cm. In depth consolidating each deposited

layer by remming and watering.

4 16.00 Providing and laying cement concrete 1:4:8 (1-Cement : 4-

Cmt. fine sand : 8-graded birck aggregates 40 mm nominal size)

and curing complete excluding cost of form work in (a)

Foundation and plinth. 2660.45 Cmt.

5 25.50 Providing and Laying controlled cement concrete M-250

Cmt. and curing complete, including the cost of formwork but

excluding the cost of reinforcement for reinforced concrete

work in Column footings.

6 5.00 Providing and laying controlled cement concrete M-250

Cmt. and curing complete including the cost of formwork But

Excluding the cost of reinforcement for reinforced concrete

work in Column upto Plinth Level having any cross section

7 6.00 Providing and Laying controlled cement concrete M-250

Cmt. and curing complete, including the cost of formwork but

excluding the cost of reinforcement for reinforced concrete

work in Columns having any cross section area upto floor

two level. 9244.53 Cmt.

8 7.00 Providing and laying controlled cement concrete M-250

Cmt. and curing complete including the cost of formwork but

Excluding the cost SBD

of reinforcement

SECTION-7 for reinforced

OF QUANTITIES-176

work in Ground Beam having any cross section area.

9 1.50 Providing and laying controlled cement concrete M-250

Cmt. and curing complete including the cost of formwork and

excluding the cost of reinforcement of reinforced concrete

work in COPING 6228.67 Cmt.

4430.00 Providing and supplying TMT Fe-500 bar steel

Kgs. reinforcment for R.C.C work including bending, binding and

placing in position etc. complete

11 10.00 Brick work using common burnt building bricks having

Cmt. crushing strngth not less than 35 Kg./cm2 in super

structure for Ground Floor in C.M. (1:6) (1 Cement, 6 fine

sand) racking out joints curring etc. complete directed by

Engineer-in-charge.

12 151.00 20 mm thick sand faced cement plaster on walls up to

Smt heinht 10 metres above ground laval cosisting of 12 mm

thick backing coat of C:M 1:3 (1-cement :3-sand) and

8mm thick finishing coat of C:M 1:1 (1-cement :1-sand) etc

complete. 300.66 Smt.

13 151.00 Finishing wall with water proof exterior emulsion apex

Smt paint of on wall surfaces (two coats) to give an approved

brand and manufacture and of required slope evan shade

after throughly brushing the surface to remove all dirt and

remains of loose powered materials. etc completed.

14 2180.00 Providing and fixing M.S. grills of required pattern to

Kgs. wooden frames of windows etc. with M.S. flats at required

spacings and frame alround, square or round bars with

round headed bolts and nuts or by screws (A) Plain Grill.

15 952.00 Painting two coats (Including Priming Coat) on new steel

Smt. and other metal surface with synthetic enamel paint,

brushing to give an even shade including cleaning the

surface of all dirt, dust and other foreign matter. 99.990 Smt.

SBD SECTION-7 BILL OF QUANTITIES-177

DHARAMPUR MUNICIPALITY, DHARAMPUR

NAME OF WORK :- ESTIMATE FOR CONSTUCTION WORK OF TOILET BLOCK -1 SEPTIC TANK AT LIBRARY

BUILDING AT DHARAMPUR

Item Qty. Description Total Unit Amount

1 24.62 Excavation for base footings upto depth 1.5 m. including sorting

Cmt. out and disposing of the excavated material upto 50 m lead

(loose or soft soil)

2 5.00 Excavation for base footings upto depth 1.5 m. including sorting

Cmt. out and disposing of the excavated material upto 50 m lead

(loose or soft soil)

3 26.00 Filling available excavated earth (excluding rock) in trenches.

Cmt. plinth, sides of foundations etc. in layers not exceeding 20 cm. in

depth consolidating each disposited layer by ramming and

4 4.00 Filling in foundation and plinth with murrum or selected soil in

Cmt. layers of 20cm thickness including watering, ramming and

consolidating etc. complete.

5 12.00 Carrying out plinth treatment to post construction/existing

Smt. structure by spraying chemical solution for termite control

treatment including labour and material consistment with I.S.I

specification. Using Chlordene and chiorpurfiles 20 EC. As per

6131_paret-II consteration weight one percent is recommended

i.e. one litre 20 EC chemical emulsion with 19 liter give 1%

concrentration inclusive of one litre chemical emulsion

application at the rate of 5 litre chemical/sqm of surface as

recommended as per I.S.

6 4.50 Providing and laying cement concrete 1:3:6 (1 Cement, 3 coarse

Cmt. sand, 6 hand broken stone aggregates 40mm. Nominal size)

and curing ecomplete excluding cost of formwork in (A)

Foundation and Plinth.

SBD SECTION-7 BILL OF QUANTITIES-178

7 Providing and laying controlled cement concrete M-250 and

curing complete including the cost of formwork and excluding the

cost of reinforcement of reinforced concrete work in

a 4.17 -- do -- for Col footing 4516.22 Cmt.

b 1.03 -- do -- for Col up to PL 7131.11 Cmt.

c 1.10 -- do -- for Ground Beam 5831.74 Cmt.

d 0.48 -- do -- for Plinth Beam 5831.74 Cmt.

8 Providing and laying controlled cement concrete M-200 and

curing complete including the cost of formwork and excluding the

cost of reinforcement of reinforced concrete work in

a 0.30 -- do -- for Coping 5705.49 Cmt.

b 0.40 -- do -- for R.C.C. Lintel 8177.97 Cmt.

c 0.66 -- do -- for Chhajja 7746.70 Cmt.

d. 1.78 -- do -- for Col 8599.14 Cmt.

e 0.89 -- do -- for Beam 6007.48 Cmt.

f 1.52 -- do -- for R.C.C. Slab 6221.60 Cmt.

1596.38 Providing T.M.T. Bar Fe 500 / 500-D reinforcement for

Kgs. R.C.C.work including bending, binding and placing in position

complete upto floor two level.(upto 10 ton)

10 0.61 Brick work using common burnt building bricks having crushing

Cmt. strngth not less than 35 Kg./cm2 in super structure for Ground

Floor in C.M. (1:6) (1 Cement, 6 fine sand) racking out joints

curring etc. complete directed by Engineer-in-charge.

SBD SECTION-7 BILL OF QUANTITIES-179

11 6.70 Brick work using common burnt building bricks having crushing

Cmt. strngth not less than 35 Kg./cm2 in super structure for Ground

Floor in C.M. (1:6) (1 Cement, 6 fine sand) racking out joints

curring etc. complete directed by Engineer-in-charge.

12 26.60 (i) Half brick masonry in common brunt clay building bricks

Smt. having crushing strength not less than 35 kg/sq. cm. in cement

mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.

(B) Conventional (upto 10 ton)

13 3.80 Providing and fixing flush door shutters, soild core construction

Smt. with frame of first class hardwood with crossboard and face

veneer or plywood face panels, including anodised aluminium

butt hinges with necessary screws. (B) Non-decorative type

and block board core anodised alluminium butt hinges in flush

door shutters. (2) 35 mm thick.

14 6.30 Providing and fixing FRP frame size 125 x 65 mm and 35 mm

Smt. thick FRP shutter with wood grain raised panneled design finish

shutter having extra reinforcement on side & edges in Gel coat

finish. The core of the shutter & frame is to be filed up with

injected polyurethene foam done in situ alongwith embedded

wooden pieces for stiffening & also taking hinges & fintures. The

whole FRP frame & Shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkhli. Rates are to be

inclusive of S.S.hinges with fastener Sleeve & alluminium

fixtures & fastenings.

15 2.40 Providing and fixing glazed louverd glass windows and

Smt. ventilators with teakwood frame 10cm x 7cm size including the

cost of oil painting to wood work etc. complete.(A)C.M 1:3

16 186.00 Providing and fixing M. S. grills of requried pattern to wooden

Kgs. frames of window etc. with M. S. flats at requried spacings and

frame alround square or round bars with round headed bolts and

nuts or by screws. (B) Plain Grills

17 76.61 Providing 15 mm. thick cement plaster in single coat on Rough

Smt. (similar) side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in. (II) cement

mortar 1 : 4 (1 cement : 4 sand) Extra over item 58 to 64 for

finishing with a floating coat of neat cement slurry. (upto 10 ton)

SBD SECTION-7 BILL OF QUANTITIES-180

18 11.75 Providing 10 mm. thick cement plaster in single coat on

Smt. brick/concrete walls for interior plastering up to floor two level

and finished even and smooth in. (II) cement mortar 1 : 4 (1

cement:4 sand) Extra over item 58 to 64 for finishing with a

floating coat of neat cement slurry. (upto 10 ton) Extra over items

58 to 71 for plastering on cellings and sofits of stairs upto floor

two level instead of plastering on walls.

19 41.70 Providing and Laying 20 mm thick sand face cement plaster on

Smt. Walls upto height of 10 mts. Above ground level consisting of

12mm thicjk backing coat of C.M 1:3 (1 Cement, 3 Sand ) and

mm thick finishing coat of C.M 1:1 (1 Cement, 1 Sand) etc.

20 88.35 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on wall

surfaces to give and even shade over and including a primer

coat with alkali resistance primer of approved brand after

throughly brushing the surface to give and even shade free from

foreign matter and also including preparing the surface even and

21 41.70 Finishing wall with Weather Proof Acrylic Emulsion Exterior Paint

Smt. on wall surface (three coat) to give and even shade and of

approved brand and manufacture including throughly brooming

and brushing the surface to remove all dirts, and remians of

loose powdered material.

22 5.80 Providing & Laying 24 "x 24" vitrified 8 mm thick tile flooring over

Smt. 20 mm ( average) base of cement mortar 1:6 (1: cement :

coarse sand ) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring and

jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for antiskit . (upto

23 4.20 Providing and laying white glazed tiles 6mm thick in flooring,

Smt treads of steps and landing laid on a bed of 12mm thick cement

mortar 1:3 (1 Cement : 3 Coarse Sand) finished with flush

pointing in white cement.

24 65.34 Providing and laying white glazed tiles 6mm thick in skitring

Smt risers of steps and dado on 10mm thick cement plaster 1:3 (1

cement : 3 coarse sand) and pointing in white cement jointed

with white cement slurry.

SBD SECTION-7 BILL OF QUANTITIES-181

25 11.75 Providing and laying broken china mosaic flooring for terrace

using 12mm to 20mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope and to be tempered to

bring mortar crème out upto surface using white cement

including rounding off junctions and extending them upto 15cm

along the wall, clearing with water and oxalic acid. etc. as

26 3.60 Providing, Supplying, Lowering and Laying in standard length ISI

Rmt. mark rigid unplasticised PVC pipes suitable for potable water

with ring fit joint including cost of rings, as per IS Specification

no. 4985/1988 including all local and central taxes,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores and

including cost of jointing material etc. complete.75 MM

27 4.00 Providing and fixing wash down water closet European type

Nos. W.C. Pan with integral "P" or "S" trap and PVC flushing cistern

with a pair of C.L.I. or Mild Steel Brackets, complete with fittings

such as lead value siphon, 15mm nominal size brass ball value

with polythene float, C.P. Brass handle unions and couplings for

connections with inlet, outlet and over flow pipes, 40 mm dia

flush bend including cutting holes in walls and making good the

same connecting the flush bend with cistern and closet etc.

comp. incl plastic sheet cover including jointing trap with pipe in

C.M. 1:1 ( Cement : 1 fine sand) (a) Viterous China - (i) In White

28 4.00 Providing and fixing G.I. Inlet Connection for flush pipe with W.C.

Nos. Pan. 38.81 Nos.

29 2.00 Providing and fixing 430mm x 260mm x 350mm size white

Nos. earthen ware flat back or corner type urinal of approved quality

including. Connections the urinal with waste pipe, stop tap etc.

30 6.00 Providing and fixing screw down bib tap of following size (A)

Nos. Brass screw bib tap polished bright - 15mm

31 2.00 Providing and fixing gun metal chek or non return fullway wheel

Nos. valve. (A) 15 mm Dia. 186.83 Nos.

32 8.00 Providing and fixing 100 mm dia sand cast iron grating for gully,

Nos. floor or nanhi trap. 36.98 Nos.

SBD SECTION-7 BILL OF QUANTITIES-182

33 4.00 Providing and fixing Cast Iron (Spun nahni trap of the 100mm.

Nos. Inlet and 50mm. Dia outlet having self cleaning design with C. I.

Screwed down or hinged grating and stainless steel jali at F.F.I.

Including cost of making cuts in walls slab floor etc. and making

them as per original testing etc. complete as directed by

Engineer-in-charge.

34 1.00 providing and fixing SW gully trap with CI grating brick masonry

Nos. chamber and water tight CI cover frame of 300mmx300mm size

inside with standard weight. Square mouth Traps (A)

100x100mm size P trap type.

35 1.00 Providing, laying and constructing brick masonry chamber for

Nos. underground C. I. Inspection Chamber and bends with bricks

having crushing strength not less than 35Kg./Cm2 on C. M. (1:5)

(1 cement, 5 Sand) C. I. Cover with frame (light duty) of 455mm

x 610mm internal dimension total weight of cover with frame to

be not less than 38.00 Kgs. (Wt. of Cover 38 Kgs. and wt. of

Frame 15 Kgs.) with R.C.C. top slab with 1:2:4 (1 cement,

Coarse sand, 4 graded stone (Kapachi) ) foundation concrete

1:5:10 (1 cement, 5 Coarse sand, 10 brick bats of 40mm

nominal size) inside plaster 15mm. thick with C. M. 1:3 (1

cement, 3 Coarse sand) finished smooth with a floating coat of

neat cement slurry on walls and bed concrete including curing

etc. complete as directed by Engineer-in-charge.

Inside Dimentions 600mm x 850mm and 450mm deep for pipe

line with Three or more Inlets.

36 50.00 Providing, laying and jointing in true line and level 32 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as

Prince/ supreme/astral/finolex or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help

of clamp at every two meter c/c. or shall be concealed as

directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including

cost of all materials.

37 25.00 Providing, laying and jointing in true line and level 15 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as

Prince/ supreme/astral/finolex or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help

of clamp at every two meter c/c. or shall be concealed as

directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including

cost of all materials.

SBD SECTION-7 BILL OF QUANTITIES-183

38 90.00 Providing, laying and jointing in true line and level 110 diametre

Rmt. U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of PVC clamp

of the size 110 mm diametre x 149 mm length x 145 mm heigh

at every 2000 mm center to center or shall be concealed in walls

as directed including necessary fittings such as bends, shoes

etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

39 2000.00 Providing erecting and fixing double coated syntex PVC ISI or

Ltr. equivalent PVC (ISI) mark water tank of required capecity each

with all necessary fittings & connection etc. complete on terrace

40 2.00 Providing and fixing white viterous china flat back wash basin of

Nos. 550mm x 400mm size with single hole for pillar tape with C.I. or

M.S. brackets painted white including cutting holes and making

good the same. Rates including providing and fixing 32mm dia

C.P. Brass waste couplin, 32mm dia M.I. Fisher unit, Brass

screw down stop tap of 15mm dia pillar tap capstan head, screw

down high pressure with screws, shanks, back nuts, PVC pipe &

32mm dia flexible waste pipe up to Nani Trap etc. complete as

directed by engineer in charge.

41 1.00 Construction Septic tank Inside dimention of 4.00 m in length &

Nos. 2.50 m In width & 2.00 m depth Including excavating any type of

soil as shown and mentioned in the drawing,providing and laying

0.10 m thick plain cement concrete 1:3:6 (1 cement: 3 coarse

sand: 6 graded stone agg.) 40 mm thick IPS flooring at bottom

with brick masonary 0.23 m thick walls CM 1:5 (1 cement:

coarse sand) and intermediate partition CM 1:4 & RCC Top

slabs12 cms thick in 1:2:4 (1 cement: 2 coarse sand: 4 graded

stone agg) including reinforcement as per design and 15 mm

thick cement plaster in CM 1:4 with floating coat of neat cement

slurry Inside, top and around tank below 15 cm on ground level,

Also provide Two nos CI Manhole frame and cover of size 60 cm

x 45 cm & 75 mm dia. PVC 10 kgf/Sq cm pressure air vent pipe

in 3.00 length with cowl etc complete as per direction of

Engineer in charge.

Add : 5% for Electrical Installation Rs.

SBD SECTION-7 BILL OF QUANTITIES-184

TOILET BLOCK AT DHARAMPUR

NAME OF WORK :- ESTIMATE FOR CONSTUCTION WORK OF TOILET BLOCK - 2 AT LIBRARY BUILDING AT

Item Qty. Description Total Unit Amount

1 30.56 Excavation for base footings upto depth 1.5 m. including sorting out

Cmt. and disposing of the excavated material upto 50 m lead (loose or soft

2 5.35 Excavation for base footings upto depth 1.5 m. including sorting out

Cmt. and disposing of the excavated material upto 50 m lead (loose or soft

3 31.63 Filling available excavated earth (excluding rock) in trenches. plinth,

Cmt. sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming and watering.

4 2.96 Filling in foundation and plinth with murrum or selected soil in layers of

Cmt. 20cm thickness including watering, ramming and consolidating etc.

5 11.39 Carrying out plinth treatment to post construction/existing structure by

Smt. spraying chemical solution for termite control treatment including

labour and material consistment with I.S.I specification. Using

Chlordene and chiorpurfiles 20 EC. As per 6131_paret-II consteration

weight one percent is recommended i.e. one litre 20 EC chemical

emulsion with 19 liter give 1% concrentration inclusive of one litre

chemical emulsion application at the rate of 5 litre chemical/sqm of

surface as recommended as per I.S.

6 4.44 Providing and laying cement concrete 1:3:6 (1 Cement, 3 coarse sand,

Cmt. 6 hand broken stone aggregates 40mm. Nominal size) and curing

ecomplete excluding cost of formwork in (A) Foundation and Plinth.

7 Providing and laying controlled cement concrete M-250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement of reinforced concrete work in

a 4.67 -- do -- for Col footing 4515.71 Cmt.

SBD SECTION-7 BILL OF QUANTITIES-185

b 1.55 -- do -- for Col up to PL 7131.11 Cmt.

c 1.20 -- do -- for Ground Beam 5831.74 Cmt.

d 0.34 -- do -- for Plinth Beam 5831.74 Cmt.

8 Providing and laying controlled cement concrete M-200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement of reinforced concrete work in

a 0.17 -- do -- for Coping 5705.49 Cmt.

b 0.59 -- do -- for R.C.C. Lintel 8177.97 Cmt.

c 0.56 -- do -- for Chhajja 7746.70 Cmt.

d. 2.08 -- do -- for Col 8599.14 Cmt.

e 1.34 -- do -- for Beam 6007.48 Cmt.

f 1.85 -- do -- for R.C.C. Slab 6221.60 Cmt.

1903.54 Providing T.M.T. Bar Fe 500 / 500-D reinforcement for R.C.C.work

Kgs. including bending, binding and placing in position complete upto floor

two level.(upto 10 ton)

10 1.23 Brick work using common burnt building bricks having crushing strngth

Cmt. not less than 35 Kg./cm2 in super structure for Ground Floor in C.M.

(1:6) (1 Cement, 6 fine sand) racking out joints curring etc. complete

directed by Engineer-in-charge.

11 6.77 Brick work using common burnt building bricks having crushing strngth

Cmt. not less than 35 Kg./cm2 in super structure for Ground Floor in C.M.

(1:6) (1 Cement, 6 fine sand) racking out joints curring etc. complete

directed by Engineer-in-charge.

12 14.87 (i) Half brick masonry in common brunt clay building bricks having

Smt. crushing strength not less than 35 kg/sq. cm. in cement mortar 1:4 (1

cement : 4 coarse sand) in foundation and plinth. (B) Conventional

SBD SECTION-7 BILL OF QUANTITIES-186

13 3.78 Providing and fixing flush door shutters, soild core construction with

Smt. frame of first class hardwood with crossboard and face veneer or

plywood face panels, including anodised aluminium butt hinges with

necessary screws. (B) Non-decorative type and block board core

anodised alluminium butt hinges in flush door shutters. (2) 35 mm

14 6.30 Providing and fixing FRP frame size 125 x 65 mm and 35 mm thick

Smt. FRP shutter with wood grain raised panneled design finish shutter

having extra reinforcement on side & edges in Gel coat finish. The

core of the shutter & frame is to be filed up with injected polyurethene

foam done in situ alongwith embedded wooden pieces for stiffening &

also taking hinges & fintures. The whole FRP frame & Shutter is to be

water proof weather proof, termite proof & resistance to mild

acid/alkhli. Rates are to be inclusive of S.S.hinges with fastener

Sleeve & alluminium fixtures & fastenings.

15 1.44 Providing and fixing glazed louverd glass windows and ventilators with

Smt. teakwood frame 10cm x 7cm size including the cost of oil painting to

wood work etc. complete.(A)C.M 1:3

16 156.60 Providing and fixing M. S. grills of requried pattern to wooden frames

Kgs. of window etc. with M. S. flats at requried spacings and frame alround

square or round bars with round headed bolts and nuts or by screws.

(B) Plain Grills

17 74.29 Providing 15 mm. thick cement plaster in single coat on Rough

Smt. (similar) side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in. (II) cement mortar 1 :

4 (1 cement : 4 sand) Extra over item 58 to 64 for finishing with a

floating coat of neat cement slurry. (upto 10 ton)

18 11.39 Providing 10 mm. thick cement plaster in single coat on brick/concrete

Smt. walls for interior plastering up to floor two level and finished even and

smooth in. (II) cement mortar 1 : 4 (1 cement:4 sand) Extra over item

58 to 64 for finishing with a floating coat of neat cement slurry. (upto

10 ton) Extra over items 58 to 71 for plastering on cellings and sofits of

stairs upto floor two level instead of plastering on walls.

19 45.02 Providing and Laying 20 mm thick sand face cement plaster on Walls

Smt. upto height of 10 mts. Above ground level consisting of 12mm thicjk

backing coat of C.M 1:3 (1 Cement, 3 Sand ) and 8 mm thick finishing

coat of C.M 1:1 (1 Cement, 1 Sand) etc. complete.

SBD SECTION-7 BILL OF QUANTITIES-187

20 85.68 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on wall

surfaces to give and even shade over and including a primer coat with

alkali resistance primer of approved brand after throughly brushing the

surface to give and even shade free from foreign matter and also

including preparing the surface even and smooth.

21 45.02 Finishing wall with Weather Proof Acrylic Emulsion Exterior Paint on

Smt. wall surface (three coat) to give and even shade and of approved

brand and manufacture including throughly brooming and brushing the

surface to remove all dirts, and remians of loose powdered material.

22 5.95 Providing & Laying 24 "x 24" vitrified 8 mm thick tile flooring over

Smt. mm ( average) base of cement mortar 1:6 (1: cement : 6 coarse sand

) on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for antiskit . (upto 10 ton)

23 4.61 Providing and laying white glazed tiles 6mm thick in flooring, treads of

Smt steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1

Cement : 3 Coarse Sand) finished with flush pointing in white cement.

24 65.18 Providing and laying white glazed tiles 6mm thick in skitring risers of

Smt steps and dado on 10mm thick cement plaster 1:3 (1 cement :

coarse sand) and pointing in white cement jointed with white cement

slurry. 946.50 Smt.

25 11.42 Providing and laying broken china mosaic flooring for terrace using

12mm to 20mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar crème

out upto surface using white cement including rounding off junctions

and extending them upto 15cm along the wall, clearing with water and

oxalic acid. etc. as directed.

26 3.60 Providing, Supplying, Lowering and Laying in standard length ISI mark

Rmt. rigid unplasticised PVC pipes suitable for potable water with ring fit

joint including cost of rings, as per IS Specification no. 4985/1988

including all local and central taxes, transportation, freight charges,

octroi, inspection charges, loading, unloading, conveyance to the

departmental stores and including cost of jointing material etc.

SBD SECTION-7 BILL OF QUANTITIES-188

27 4.00 Providing and fixing wash down water closet European type W.C. Pan

Nos. with integral "P" or "S" trap and PVC flushing cistern with a pair of

C.L.I. or Mild Steel Brackets, complete with fittings such as lead value

siphon, 15mm nominal size brass ball value with polythene float, C.P.

Brass handle unions and couplings for connections with inlet, outlet

and over flow pipes, 40 mm dia flush bend including cutting holes in

walls and making good the same connecting the flush bend with

cistern and closet etc. comp. incl plastic sheet cover including jointing

trap with pipe in C.M. 1:1 ( Cement : 1 fine sand) (a) Viterous China -

(i) In White Color.

28 4.00 Providing and fixing G.I. Inlet Connection for flush pipe with W.C. Pan.

Nos. 38.81 Nos.

29 2.00 Providing and fixing 430mm x 260mm x 350mm size white earthen

Nos. ware flat back or corner type urinal of approved quality including.

Connections the urinal with waste pipe, stop tap etc. complete.

30 6.00 Providing and fixing screw down bib tap of following size (A) Brass

Nos. screw bib tap polished bright - 15mm

31 2.00 Providing and fixing gun metal chek or non return fullway wheel valve.

Nos. (A) 15 mm Dia. 186.83 Nos.

32 8.00 Providing and fixing 100 mm dia sand cast iron grating for gully, floor

Nos. or nanhi trap. 36.98 Nos.

33 8.00 Providing and fixing Cast Iron (Spun nahni trap of the 100mm. Inlet

Nos. and 50mm. Dia outlet having self cleaning design with C. I. Screwed

down or hinged grating and stainless steel jali at F.F.I. Including cost

of making cuts in walls slab floor etc. and making them as per original

testing etc. complete as directed by Engineer-in-charge.

34 1.00 providing and fixing SW gully trap with CI grating brick masonry

Nos. chamber and water tight CI cover frame of 300mmx300mm size inside

with standard weight. Square mouth Traps (A) 100x100mm size P trap

type. 1292.19 Nos.

SBD SECTION-7 BILL OF QUANTITIES-189

35 1.00 Providing, laying and constructing brick masonry chamber for

Nos. underground C. I. Inspection Chamber and bends with bricks having

crushing strength not less than 35Kg./Cm2 on C. M. (1:5) (1 cement,

Sand) C. I. Cover with frame (light duty) of 455mm x 610mm internal

dimension total weight of cover with frame to be not less than

Kgs. (Wt. of Cover 38 Kgs. and wt. of Frame 15 Kgs.) with R.C.C. top

slab with 1:2:4 (1 cement, 2 Coarse sand, 4 graded stone (Kapachi) )

foundation concrete 1:5:10 (1 cement, 5 Coarse sand, 10 brick bats of

40mm nominal size) inside plaster 15mm. thick with C. M. 1:3 (1

cement, 3 Coarse sand) finished smooth with a floating coat of neat

cement slurry on walls and bed concrete including curing etc. complete

as directed by Engineer-in-charge.

Inside Dimentions 600mm x 850mm and 450mm deep for pipe line

with Three or more Inlets.

36 50.00 Providing, laying and jointing in true line and level 32 mm dia U.P.V.C.

Rmt. Pipe (SCH-40) for cold water including fittings make as Prince/

supreme/astral/finolex or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every

two meter c/c. or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

37 25.00 Providing, laying and jointing in true line and level 15 mm dia U.P.V.C.

Rmt. Pipe (SCH-40) for cold water including fittings make as Prince/

supreme/astral/finolex or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every

two meter c/c. or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

38 90.00 Providing, laying and jointing in true line and level 110 diametre

Rmt. U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and

other end socketed with rubber ring, & fittings conforming to ISI 14735-

1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 110 mm diametre x 149 mm length x

145 mm heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

39 2000.00 Providing erecting and fixing double coated syntex PVC ISI or

Ltr. equivalent PVC (ISI) mark water tank of required capecity each with all

necessary fittings & connection etc. complete on terrace

SBD SECTION-7 BILL OF QUANTITIES-190

40 2.00 Providing and fixing white viterous china flat back wash basin of

Nos. 550mm x 400mm size with single hole for pillar tape with C.I. or M.S.

brackets painted white including cutting holes and making good the

same. Rates including providing and fixing 32mm dia C.P. Brass waste

couplin, 32mm dia M.I. Fisher unit, Brass screw down stop tap of

15mm dia pillar tap capstan head, screw down high pressure with

screws, shanks, back nuts, PVC pipe & 32mm dia flexible waste pipe

up to Nani Trap etc. complete as directed by engineer in charge.

Add : 5% for Electrical Installation Rs.

SBD SECTION-7 BILL OF QUANTITIES-191

DHARAMPUR MUNICIPALITY, DHARAMPUR

NAME OF WORK :- PROVIDING & FIXING OF PAVER BLOCK AT LIBRARY BUILDING AT DHARAMPUR

Item Qty. Description Total Unit Amount

1 21.18 Box Cutting the Road Surface to proper slope and camber for

Cmt. making a base for road work including removing the excavated

stuff and dipositing to road slope as directed all lead and lift etc. 104.04 Cmt.

2 21.18 Providing and laying cement concrete 1:3:6 (1-Cement : 3-

Cmt coarse sand : 6- hand broken stone aggregates 40 mmnominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

3 0.80 Providing and laying cement concrete 1:2:4 (1- Cement : 2-

Cmt. Coarse sand : 4- graded stone aggregates 20 mm nominal size)

and curing complete excluding cost of formwork in (A)

Foundation and Plinth

4 211.80 Providing and fixing Pre-Cast Rubber Dye Steel dye inter locking

Smt concrete block 60 mm thick with grade of concrete M30

pneumatic compressed / Vibrated mechanically and as per

approved design confirming to IS 15658: 2006 including 35 mm

Sand layer for leveling and filling joint with sand in proper line and

level as per guidelines if IRC : SP 63-2018 etc. Complete.

SBD SECTION-7 BILL OF QUANTITIES-192