Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.5 LAccepted-AOC 137 3 STREET NO 4 RAJINDER NAGAR DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L1 | Accepted-AOC ACEEPTED BEING LOWEST TENDER | |
| 2 | L2₹27.8 L+₹4.0 L (16.7%)Rejected-AOC 27 CHITRAKOOT ENCLAVE NEAR ANURAG NURSARY DEHRADUN 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L2 | Rejected-AOC REJECTED BEING NOT LOWEST TENDER | |
| 3 | L3₹28.4 L+₹4.6 L (19.2%)Rejected-AOC SHOP NO 5 OPP SHANI MANDIR PROFESSOR COLONY DISTT YAMUNA NAGAR HARYANA 135001 | YAMUNANAGAR | HARYANA | 135001 | L3 | Rejected-AOC REJECTED BEING NOT LOWEST TENDER | |
| 4 | L4₹28.5 L+₹4.7 L (19.9%)Rejected-AOC C 9 53 SECTOR 8 ROHINI NEW DELHI 110085 | NEW DELHI | NEW DELHI | DELHI | 110085 | L4 | Rejected-AOC REJECTED BEING NOT LOWEST TENDER |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
15 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) RND Dehradun
GE I RND DEHRADUN DEAL RESIDENTIAL COMPLEX RAIPUR ROAD DEHRADUN 248008
REPAIR TO B/R AND E/M ITEM IN TECHNICAL AND RESIDENTIAL AREA OF IRDE AND DEAL UNDER GE (I) RND DEHRADUN
2023_MES_580744_2
GE(I)RND/9215/E8/22-23
Open Tender
Civil Works
Item Rate
180 days
DEAL
Class D Category a (i) FOR UNENLISTED CONTRACTOR (i) Enlistment criteria may be seen in Para 1.4 and 1.5 of section of Part I of MES Manual on contracts-2020 as available in all MES formations (ii) Copy of police verification /passport.
6 documents required · 6 mandatory
₹500
Yes
GE (I) RND Dehradun
₹70,000
Yes
24 Mar 2023
28 Feb 2023
17 Mar 2023
28 Feb 2023
15 Mar 2023
3 Mar 2023
28 Feb 2023 - 3 Mar 2023
Amount
M&L for plain cement concrete(1:2:4) type B-1using 20 mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed and the like complete all as specified an directed.
M&L RCC type B1 (1:2:4) using 20 mm graded crushed stone aggregate as in Chajjas of any height complete all as specified and directed.
Supply only Liquid water proofing compound (ISI) marked complete all as specified and directed.
M&L for used & waste formwork to chullah hoods, chajjas, troughs & similar items including edges Rough finished surfaces of concrete flat of any height complete all as specified and directed.
M&L for PVC SHEET WALL PANELLING (colour and shade as approved by GE) of thickness 5mm solid consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a U Channel at top, bottom and side edges and strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement including taking down existing panelling complete all as specified and directed. ( Note-the unit rate Including all nesscesary fittings and scafolding for heighted site)
S&F in repair 5 mm thick pvc sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frames as per specification and drawings complete all as specified and directed.
M&L for Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed
All as per Sl item No-7 here in before but 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders complete all as specified and directed.
M & L for taking down old cement plaster/Grit wash on stone wall or brick surfaces of walls including raking out joints, hacking for key and scrubbing down with water complete all as specified and directed.(Debris will be removed out side premises at contractor own arrangement )
M&L for rendering 15 mm thick on other than fair faces of concrete/ brick surface in cement mortar 1:6 finished fair and even as in wall complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of concrete/ brick surface in cement mortar 1:4 mixed with liquid water proofing compound finished fair and even as in wall including scaffolding and all necessary items complete all as specified and directed. (Water proofing compound shall be measured and paid sepratly) Notes:- The work will be carried out upto hight of 6th storey bldgs
M&L 20 mm thick cement plaster on fair face of concrete surface including repair of doubing roof/chajja/facia surfaces in CM 1:3 mixed with liquid water proofing compound finished even land smooth without using extra cement over complete all as specified and directed. (Water proofing compound shall be measured and paid sepratly) Notes:- The work will be carried out upto hight of 6th storey bldgs
M&L for rendering 10 mm thick on fair faces of Chajjas, facia, roof projection concrete in cement mortar 1:4 with and including using SBR Chemical (Fosrock or equivalent) as per manufacturer Instruction finished fair and even complete all as specified and directed. Notes:- The work will be carried out upto hight of 6th storey bldgs
Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debris and rubbish off the premises and stacking serviceable tiles to store etc complete all as specified and directed.
M&L for non skid coloured ceremic tiles 7 to 8 mm thick (square/rectangular) area of each tilles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. Set & jointed in neat cement slurry and pointed in colored cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in cm (1:6) complete all as specified and directed.
M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of size 300x450x7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.
M&L Complete removing of existing treatment from wall / ceilling by using machinary complete all as specified and directed.
M&L for Prepration of new/ scrapped surface of wall and applying 3mm thick Asian acrylic damp proof wall care putty in two coats as per manufactur instruction complete all as specified and directed.
M&L for Preparation of puttyied / new plaster/ undecorated surfaces of wall and applying one coat of alkali resistant primer complete all as specified and directed.
M&L for Prepration of primed surfaces of wall and applying two coats of oil emulsion distemper complete all as specified and directed.
M&L for Prepration of new/scraped/ undecorated surfaces of wall/ceiling and applying two coats of cement base paint complete all as specified and directed.
M&L for preparing old surfaces of walls plastered or un-plastered by brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of white wash on old prepared surfaces of walls complete all as specified and directed.
All as per item no 22 above but on Ceiling Surface,Complete all as specified and directed.
M&L for preparing old surfaces of walls plastered or un-plastered by brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , washing rubbing down and stopping of distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of distemper oil emulsion on old prepared surfaces of walls complete all as specified and directed.
All as per item no 24 above but on Ceiling Surface,Complete all as specified and directed.
M&L for preparing old decorated surfaces of walls plastered or un plastered by brooming down with steel or wire brush and scraping down smoke moulds moss and efflorescent salt and treading oil and greasy spots , washing rubbing down and stopping of distempered and painted surfaces & removing all vegitation and making good holes ,craks complete by necessary putty and applying one coat of aclyric plastic emulsion paint on old prepaared surfaces of walls complete all as specified and directed.
M&L for Preparation of puttyied / new plaster / undecorated surfaces of wall and applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade ( Company Depot Tinted) with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of exterior primer applied and 0.90 litre/10sqm complete all as specified and directed.
M&L for preparing old surfaces of walls plastered or un-plastered by complete removal of existing treatment by electric angle grinder and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and stoping of distempered and painted surface of wall and applying one coat of cement based paint complete all as specified and directed.
M&L for preparing of old painted wooden surfaces over 10cm width or girth and making good including knotting and stopping,cleaning etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of synthetic enamel paint on old prepared surfaces of wooden complete all as specified and directed.
M&L for preparing of old painted steel surfaces over 10cm width or girth and making good with & including by necessary red lead putty and make the surface smooth by rubbing with sand papers etc and applying one coat of synthetic enamel paint on old prepared surfaces of steel complete all as specified and directed.
M&L for preparing of old polished wooden surfaces over 10cm width or girth and making good including knotting and stopping,cleaning etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one or more coat of french polish on old prepared surfaces of wooden complete all as specified and directed.
Demolition of ( reinforced cement concrete) (reinforcement cut as required to facilitiate demolition) of any description and in any positionnot otherwise specifically provided for complete all as specified and directed.
M&L for removing the plants/ vegetation upto Six story height including penefreated roots complete and injecting chemical GLYPHOSPHATW 41% SL 20 ml or till refusal by makimg cut/ injection in the stem of plant 30mm C/C spraying with solution (25ml Glyphospoto 41% diluted with one litre water) including necessary scaffolding etc complete all as specified and directed. Notes:- The work will be carried out upto hight of 6th storey bldgs
Taking down of carefully unserviceable Aluminium/copper point wiring (light, fan socket or power) complete with fitting such as switches, ceiling rose lamp holder, sockets, fan regulators, SK/FTL light fittings etc removing materials for store for keeping in safe custody or for taking credit (credit for above items should be taken as per conditions separately) and making good disturbed surfaces of walls, floors etc as complete all as specified and directed.
M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, concealed conduit wiring in walls and surface with GI saddles GI screws, rawal plugs in ceiling or roof if not possible including Tee, Junction boxes and provision of flush metal boxes, inner and outer plate suitable for modular switch, socket and fan regulator as per site requirement and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for one light/Fan point controlled by one Switch complete all as specified and directed. Make of cable:Polycab/Havells/Gloster, as approved by GE. Make of conduit: Finolex/Polycab/Supreme
All as per Srl item No 35 here in before for point wiring for one light point controlled by two Nos two way switch complete all as specified and directed.
All as per Srl item No 35 here in before for point wiring for 5 pin switch socket outlet, 5/6 Amps on same board with other switches omplete all as specified and directed.
All as per Srl item No 35 here in before for point wiring for 5 pin switch socket outlet, 5/6 Amps on independent board complete all as specified and directed.
All as per item No 35 here in before for one power point 3 pin 15 Amps socket out let PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area)cable common connected to earth dolly, all as specified for one 3 pin 15 amps socket outlet point controlled by one switch complete.
All as per Srl item No 35 here in before but point wiring for one bell/buzzer point controlled by one push button on the same board with other switches or independent complete all as specified and directed.
S&F Modular switch single pole one way 6 amp complete all as specified and directed. Make -Anchor Penta/Legrand/Havells as approved by GE.
S&F Modular switch single pole one way 16 amp complete all as specified and directed.. Make -Anchor Penta/Legrand/Havells as approved by GE.
S&F Modular switch, 6 amp, single pole, two way complete all as specified and directed. Make -Anchor Penta/Legrand/Havells as approved by GE.
S&F Modular bell push, 6 amp 240 volts complete all as specified and directed. Make -Anchor Penta/Legrand/Havells as approved by GE.
S&F door bell ding dong type, AC, 240 volts, single pole complete all as specified and directed. Make -Anchor/Legrand/Havells as approved by GE.
S&F Modular socket outlet 2/3 pin combined 2 module 6/16 amp complete all as specified and directed by Engr-In-Charge. Make -Anchor Penta/Legrand/Havells
S&F Modular socket outlet 2/3 pin combined 2 module 6 amp complete all as specified and directed. Make -Anchor/Legrand/Havells as approved by GE.
S&F ceiling rose 3 phase polycarbonate, isolated body complete all as specified and directed.. Make - Legrand/Anchor/Havells as approved by GE.
S&F Angle holder, insulated polycabonate body with back plate suitable for batten fittings suitable for one number LED lamp complete all as specified and directed. Make -Anchor Penta/Legrand/Havells as approved by GE.
S&F modular fan step regulator 120 W 2 module complete all as specified and directed. Make -Anchor Penta/Legrand/Havells as approved by GE.
S&F in replacement of UNSV Compact commercial batten with universal batten fitting suitable for single T8 LED tube complete all as specified and directed. Make:Crompton/Shakti/Havells/Phillips as approved by GE.
S&F in replacement of UNSV fluorescent tube light with LED tube light 16 Watt T8 double sided connection with built-in driver, THD not more than 10% complete all as specified and directed. Make:Crompton/Shakti/Havells/Phillips as approved by GE.
S&F in replacement of UNSV LED mirror light fitting, 10 watts, 1000 lumens 6500K comprises of aluminium extruded channel, frosted diffuser, integrated electronic driver, IP 20 protection and all accessories pre- wired including connecting to mains complete all as specified and directed. Make- Crompton/Shakti/Havells/Phillips as approved by GE.
S&F in replacement of UNSV bulkhead fitting with integrated LED bulk head fitting 10 W 600 lumens, 6000 K comprises of pressure die cast housing, acrylic diffuser and frame IP 65 protection, IK-07 etc including connection complete all as specified and directed. Make-Crompton/Shakti/Havells/Phillips as approved by GE.
S&F in replacement of UNSV Decorative, Wall mounting champagne gold finish fixture with plastic body along with 9 W LED lamp B22 base complete all as specified and directed. Make: Havells/Philips/Crompton./Shakti as approved by GE.
Supplying, fixing & testing in replacement UNSV recess mounting in built, 24 Watts,2'x2' LED ceiling light fitting with slim line extruded aluminium/ CRCA body, opal acrylic diffuser, electronic driver etc and all accessories pre wired including connecting to source complete all as specified & directed. Make- Shakti/ Crompton/Phillips/Havells as approved by GE.
S&F in replacement of UNSV SPN plug and socket enclosure with Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole and neutral MCB 20/32 amp,240Volts power coated CRCA steel sheet enclosure recess mounted with chained metal cover for the socket outlet complete all as specified and directed. Make: Indoasian or equivalent in Legrand/Havells/L&T as approved by GE.
S&F in replacement UNSV TPN plug and socket enclosure with triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 63 amp, 415 Volts power coated CRCA steel sheet enclosure recess mounted with chained metal cover for the socket outlet complete all as specified and directed. Make of SPN DB - Legrand/L&T/Indoasian as approved by GE.
M&L in replacement of UNSV sub main wiring with sub main wiring PVC insulated, unsheathed stranded copper conductor cable FR of size 2x6 Sqmm of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (Medium grade) of suitable dia not less than 25 mm dia with standard accessories along-with PVC(green colour) insulated , unsheathed, stranded copper conductor of size 1x6 Sqmm as earth continuity conductor complete all as specified and directed. Make of cable: Havells/Polycab/Gloster as approved by GE. Make of conduit: Finolex/Polycab/Supreme
M&L in replacement of UNSV sub main wiring with sub main wiring PVC insulated, unsheathed stranded copper conductor cable FR of size 2x10 Sqmm of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (Medium grade) of suitable dia not less than 25 mm dia with standard accessories along-with PVC(green colour) insulated , unsheathed, stranded copper conductor of size 1x10 Sqmm as earth continuity conductor complete all as specified and directed. Make of cable: Havells/Polycab/Gloster, as approved by GE. Make of conduit: Finolex/Polycab/Supreme
M&L in replacement of UNSV sub main wiring with sub main wiring PVC insulated, unsheathed stranded copper conductor cable FR of size 4x10 Sqmm of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (Medium grade) of suitable dia not less than 32 mm dia with standard accessories along-with PVC(green colour) insulated , unsheathed, stranded copper conductor of size 1x10 Sqmm as earth continuity conductor wall/ ceiling/concealed surface etc complete all as specified and directed. Make of cable: Havells/Polycab/Gloster as approved by GE. Make of conduit: Finolex/Polycab/ Supreme
S&F in replacement of UNSV VTPN DB with vertical type load line distribution board ,double door, 4 way, AC 3 Phase 415 volt with TPN bus bar 250 Amps for each phase with 2 Neutral bar, 2 Earthbar and cable ties for cable management,fully insulted busbar & shrouded Neural bars ,improved Pan assembly for each insullation, prefitted masking sheeet,reversible door for IP 43-"IK 09 with metal door with provision for DPX3 160 Amp MCCB as incomer and SP/TP MCB's as out going complete all as specified and directed. Make of VTPN DB:-Shalabh or equivalent in Havells/C&S/Indoasian as approved by GE.
S&F in replacement of unsv MCB distribution board SPN, 240 volts, 4 ways ,powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 42- IK-09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with following ratings & ways complete all as specified and directed. Note: (i) MCB’s /Isolators etc. shall be measured and paid for separately under appropriate item of Sch ‘A’. Make: Indoasian/L&T/Legrand as approved by GE.
All as per item No 63 above but SPN, 240 volts, 8 ways complete all as specified and directed by Engr-in-Charge. Make: Indoasian/L&T/Legrand
All as per item No 63 above but SPN, 240 volts, 12 ways complete all as specified and directed. Make: Indoasian/L&T/Legrand as approved by GE.
Supply and fix in replacement of unsv MCCB with MCCB 4 pole,200 Amps 415 volts, 50 Hz, lcs=100% lcu, option for inbuilt or add on module for earth leakage protection, thermal and magnetic adjustable having breaking capacity 16 KA , with thermal magnetic protection unit and testing complete all as specified and directed. Make: Indoasian/L&T/Legrand
All as per item No 66 above but, MCCB 4 pole ,160 Amps Complete all as specified and directed. Make- Indoasian/L&T/Legrand as approved by GE.
All as per item No 66 above but MCCB 4 pole,125 Amps Complete all as specified and directed. Make- Indoasian/L&T/Legrand as approved by GE.
S & F in replacement of unsv MCB SPN with MCB SPN 240 volts 'C' Curve suitable for fixing in MCB DB of capacity 6 to 32 Amps complete all as specified and directed. Make - Indoasian/L&T/Legrand as approved by GE.
S & F in replacement of unsv MCB SP with MCB SP 240 volts 'C' Curve suitable for fixing in DB of capacity 6 to 32 Amps complete all as specified and directed. Make - Indoasian/L&T/Legrand as approved by GE.
Earthing complete with galvanized iron earth plate electrode 600mm x 600mm x 6mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed. NOTE: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted. (iii) If the desired earth resistance is not found within permissible limit shall be re done by contractor at no extra cost.
S&F in replacement of UNSV 25 mm dia rigid non metallic PVC conduit medium grade ISI marked ivory colour along with accessories in recess including cutting the wall and making good disturbed surfaces complete all as specified and directed.
S&F in replacement of switch socket combination 2 in 1, 3 pin, 5 and 15 Amp universal flush type 6/16 Amps with box (2 hole complete with suitable connection with 2x2.5sqmm and 1x1.5sqmm single core cable length upto 01 mtr complete all as specified and as directed. Make: Anchor Penta/Havells/Legrand as approved by GE.
S & F in replacement of unsv switch piano single pole flush type 6 amps, 230 volts complete all as specified and as directed Make: Anchor Penta/Havells/Legrand as approved by GE.
S&F in replacement of unsv socket out let 3 pin 6 Amps flush type complete all as specified and as directed. Make: Anchor Penta/Havells/Legrand as approved by GE.
S&F in replacement of unsv switch piano flush type single pole way 16 Amps complete all as specified and as directed. Make: Anchor Penta/Havells/Legrand as approved by GE.
S&F in replacement of unsv socket outlet 2 in 1 3 pin 5/16 Amps flush type complete all as specified and as directed. Make: Anchor Penta/Havells/Legrand as approved by GE.
M&L for Preparation of puttyied / new plaster / undecorated surfaces of wall and applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade ( Company Depot Tinted) with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of exterior primer applied and 0.90 litre/10sqm complete all as specified and directed. (The work will be carried out upto hight of 6th storey bldgs)
Note: (i) The work will be carried out upto 6th storey bldgs hence necessary safety precautions complete scaffolding and other arrangement will be managed by tenderer/ bidder accordigly. (ii) Tenderer kind attention is also invited to Srl clause 1.16 of Sec-I on srl page No 6 General rules for sefety in construction as specfied in SSR Part-I(2009) for safety measures / precautions. (iii) Steel scaffolfing is to be used in the work.
M/S PUNDIR BUILDERS
JS CONSTRUCTION COMPANY
Amit Associates
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .