8237 REPAIR TO FENCING, DRAIN, CLEANING OF SEWAGE LINE, MANHOLES, SEPTIC TANKS, SOAKAGE WELLS, WATER TANK CLEANING, CLEANING OF DRAIN PIPE REPAIRS TO PATH AND CERTAIN MISC B/R WORKS AT RTS AND DEPOT HEMPUR UNDER GE (E) BAREILLY.

Amount

Demolition and breaking up of drain pipe any dia (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5 m depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in Soft /Loose soil complete all as specified and directed.

M&L cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregate) in foundation, filling as mass concrete complete all as specified and and as directed.

Returning filling in, including spreading, levelling, watering and well ramming soil in layers not exceeding 25 cm thick, complete all as specified and directed.

M & L for removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate) concrete bed to drain pipe 100mm bore including packing under and haunching against the sides of pipes after laid and tested complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate) concrete bed to drain pipe 150 mm bore including packing under and haunching against the sides of pipes after laid and tested complete all as specified and directed.

M & L 100 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointes as specfified

M & L 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointes as specfified

Demolition of reinforced cement concrete (reinforced cut as required to facilitate to demolition) of any sescription and in any portion not otherwise specified complete all as specified and directed.

M&L cutting into existing manhole for connection of new drain pipe & removing existing drain pipe and cutting out branch channels and making good with packed spun yarn and cement mortar (1:1) and 150 mm bore pipe all as specified and as directed.

M&L for RCC 1:2:4 (Nominal Mix), type B-1 (using 20mm graded crushed stone aggregate) for slab supported on walls, beams and column in floors, roofs, landings, balconies, canopies, deck slab, manhole cover and in shelves and the like Including all necessary form work complete all as specified and directed. (Note:- Manhole cover should be covered with 3mm thick and 75mm wide GI flate Iron and weld with reinforcement all around and quoted rate should be included the same and also slab repair of septic tank include all necessary cleaning and form work tools and plant should be included in quoted rate)

M&L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F in repairs vitreous china water closet pan (Pedestal pattern), white with and including plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flush pipe, anti syphonage pipe, etc. complete all as specified and directed. Make : Parryware Model C0252 or equivalent as approved by GE

S&F in repair vitreous China squatting pan 'Orissa pattern', size 580 x 440 mm white, with integral foot rests and cast iron 'P' or 'S' trap 100mm dia, front or back inlet including connections to flush pipe including making good to floor with existing finish complete all as specified and directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc,and rubbish off the premisses complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as spd as directed

Taking down cement plaster of any description on brick walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 including finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for Cleaning /clearing blocked sewage line 100mm to 300mm dia (PVC / SGSW / RCC hume pipe) any depth by rodding between manhole to manhole manually and pumping out sludge water from manholes septic tank / soak well etc (where required) including providing trolley mounted pump set with suction pipe of adequate length and minimum 30 mtr delivery pipe including clearing spot blockages of WC, wash hand basins, sinks floor traps, NT and drainage pipes etc with and incl disposal of debris spoils and sludge hygiencially complete all a specified and directed. Notes:- The contractor shall keep the following aspect in mind while quoting unit rates in item above (i) The contractor / his authorise supervisor of the work will report daily at complain cell JE (Civ) Hempur at 0830 hours to receive day to day all complaints. (ii) All sewage complaints must be attended immediatly on receipt but not later than 24 hours. (iii) Recovery (penalty) for not attending complaint beyond 24 hours shall be Rs. 300.00 per compaints per day delayed . (iv)The contractor shall be responsible for safety of workers (v) Contractor has been binded to strictly maintain cleaning of all area under jurisdiction of JE (Civ) Hempur as per direction of ground executive (like cleaning of office area, stores area, cutting of grass by mannually or by spraying of chemical . (vi) The contractor will be responsible to provide a proper dress code to workers and also provide all safetly.

M&L for cleaning of RCC or PVC water tank at any height (on accessible / inaccessible of roofs) by removing all scale, dirt, mud etc. from tanks capacity exc 500 ltrs but not exc 1000 ltrs unpluging flushing out and cleaning proporly internally and externally with detergent powder complete, and again cleaning with fresh water including plugging back from mouths of circulating pipes & change if nipple, union etc. complete all as specified and directed

S&F 500 litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer ISI marked, white coloured, hoisted and fixed in position including 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight- 210 gms) and also including dismantling old water storage tank 500 litre capacity complete all as specified and directed.

S&F 1000 litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer ISI marked, white coloured, hoisted and fixed in position including 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight- 210 gms) and also including dismantling old water storage tank 1000 litre capacity complete all as specified and directed.

M&L for Pumping out of liquid sludge etc, from septic tank/soak well/ manhole any depth complete all as specified and directed. Note- The unit rate quoted under this item shall deemed to include the arrangements of Sewage pump and delevery pipe minimum 60 mtr length and all necessary T&P with man and material and safety equipment etc. complete all as specified and directed.

De watering of septic tank of minimum size 10m X 5m X 2.5m with portable pumping set or with suction machine and taking out manually or by mechinically with suction machine, waste material like sludge, mud, soil, sanitory a material and other dirts etc from inner side of septic tank and outer housing sump by using labour/ equipment and depositing the same waste material at low lying area by digging pits all as, cleaning and washing the surface area of Septic tank with wire brush and removing the algae growth including removal of grass/tree roots including one coat brush of bleaching powder at wall of septic tank and also minor repair like plaster (1:2) or brick work where required or desided by ground executive staff etc all as spedified and directed. (Note: Brick work will measured and paid in respective items)

Taking down eaves gutters and rain water pipes(any size or pattern or dia) including all fittings heads shoes, bends necks, etc including removal from site (measured overall fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F in repair PVC (SWR) pipe 110mm bore single socketed with rubber ring joint fixed to walls including mild steel Stack clamps made out of 50mmx 5mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof surface complete all as specified and directed.

S&F in repair PVC (SWR) pipe 75mm bore single socketed with rubber ring joint fixed to walls including mild steel stack clamps made out of 50mmx 5mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof surface complete all as specified and directed.

S&F in repair bend PVC (SWR) with oval excess door 110mm bore complete all as specified and directed.

S&F in repair bend PVC (SWR) with excess door 75mm bore complete all as specified and directed.

S&F PVC (SWR) 75 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) 110 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

S&F GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 15 mm dia & connections complete all as specified and directed.

S&F GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 20 mm dia & connections complete all as specified and directed.

S&F in repair for ISI marked Ball valves high pressure of PTMT 15mm bore with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed, (Minimum weight 210gms) complete all as specified and directed

S&F in repair service tank lid / cover suitable for 250 to 1000 ltr capacity tank of made with 0.9mm thick GI sheet with monkey protective sharp iron nail to over head PVC service tank of 250 ltrs to 1000 ltrs capacity including necessary nut, bolts washers and locking arrangement complete all as specified and directed.

S & F PVC in repair 110/75 mm dia PVC (SWR) vent cowl of any radius complete all as specified and directed.

S&F in repair 75mm bore size PVC(SWR) floor trap, Plain with grating including jointing with solvent cement complete all specified and as directed.

Demolition of cement concrete (un reinforced) in ground floor & paving not exceeding 15 cm thick below or above ground level complete all as specified and directed.

M&L for PCC 1:3:6,type C2 (using 20mm graded stone aggregates) as in surface channel & drain incl form work complete all as specified and directed.

M&L PCC 1:2:4, type B2 (using 20 mm graded stone aggregates) as in foundation, filling and mass concretecomplete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth of cement concrete using extra cement including forms moulds, mitred/ stopped ends etc. complete all as specified and directed.

M&L rendering 10 mm thick on fare faces of concrete surfaces in cm 1:4 is to be finished even and fair complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed.

M&L in repairs for machine pressesd coloured glazed chequered cement concrete 20cm x 20cm x 25cm thick Glossy finish with mixture of grey and white cement in equal proportions and no pigment set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including screed bed or bedding layer of mortar 20 mm thick, in cement mortar (1:6), complete all as specified and directed.

M&L for PCC 1:3:6, type C-2 (using 40mm greaded stone aggregates) as in sub base flooring 100 mm thick all as directed and specified.

M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment laid dry over and including 40 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.

M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid dry over and including 40 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.

Excavating in post holes (or similar hoels) each n exc 0.5 cum getting out, returining, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 mtr complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (40 mm grade aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M & L for providing RCC type B-1 1:2:4 (20mm graded aggr.)in precast post fencing post straining or terminal post strut etc. for fencing average sectional area exc.100sqcm but n'exc 250sqcm with or without chemfered angles and flat splayed rounded or meterd tops as directed and fixed.

M&L for dismantling fencing wiremesh, any type Complete all as specified and directed.

M&L for dismantling posts or struts (wood, steel or RCC) any section including taking out embeded portion and making good disturbed ground complete all as specified and directed by Engr-in-charge.

S&F for framed brackets of angles or tee with web and flanges cut to shape, drilled counter sunk for screw incl bending and welding angles gusset plates etc FE-290 (Gde -E- 165) complete all as specified and directed.

Supply only Chain Link MS galvanised fencing any size or type.

Fixing only 4mm dia galvanised steel wire, 100x100mm mesh, made up into mattressess or cages, lapped, wired and laid in position, including closing after filling to any type of standard rails, straining bolts, nut & bolt for angle iron post tie bars including provisioning of binding wire etc complete any size or type etc complete all as specified and directed.

Supply only mild steel roud bar in available length of Fe-290 (Gde E-165) 10mm dia for stiffening of the fencing complete all as specified and directed.

M&L of two coat of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth incl preparation of surfaces complete all as specified and directed.

M&L for Mild steel in flat, round or square bars, in available length , conforming to Fe-410-W(Gde E-250) of quality-B complete all as specified and directed.

S&F for mild steel bolts,purpose made with hexagonal or square head each screwed end to be fitted with washers and one hexagonal or square nut dia n.exc 12mm complete all as specified and directed.

M&L for PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and directed.

S&F in repairs Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rail straining bolts including securing or tying at crossings with and provisons of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured) complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, manhole covers fream etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing complete FE 290 Gde E-165 including taking out existing framed work or gate complete al as spd and directed

S&F in repair for 32/40mm Waste fittings, brass, chromium plated for urinal port, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including all necessary fixing arragnement with wall complete all as specified and directed.

S&F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60gms) including all fixing arrangement complete all as specified and directed.

S S CONSTRUCTION CO

M/S VIRAT CONSTRUCTION