Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.3 LAccepted-Finance | ₹32.3 L | L1 | Accepted-Finance Accepted |
| 2 | L2₹33.0 LRejected-Finance | ₹33.0 L | L2 | Rejected-Finance Rejected |
| Sl No | Description | Qty | Unit | ADITI CONSTRUCTIONS L1 | TNT CONSTRUCTIONS L2 |
|---|---|---|---|---|---|
| 1.00 | Construction of New Panchayat Office Building at Jeyanthirar nagar in Koothur Panchayat. Earth work excavation for foundation in all soils and sub soils to full depth etc., ordinary soil complete | 90.81 | cum | 263 ₹23,883.03 | 268.26 ₹24,360.69 |
| 2.00 | Collection and supply of sand and filling in to the basement including cost and conveyance to the siteand all labour charges for filling as per standard speecifications. | 21.32 | cum | 1,847 ₹39,378.04 | 1,883.94 ₹40,165.60 |
| 3.00 | Cement concrete 1:4:8 mix using 40mm iss HBG metal for foundation & flooring including labour charges etc., complete | 21.35 | cum | 5,565 ₹1.2 L | 5,676.3 ₹1.2 L |
| 4.00 | Brickwork in CM 1:5 mix using country bricks ground maded of size 23 x 11 x 7 cm including cost and conveyance of all materials etc., complete. | 71.31 | cum | 6,116 ₹4.4 L | 6,238.32 ₹4.4 L |
| 5.00 | Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X '3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification. | 64.46 | sqm | 548 ₹35,324.08 | 558.96 ₹36,030.56 |
| 6.00 | Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X '3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification. | 235.96 | sqm | 1,095 ₹2.6 L | 1,116.9 ₹2.6 L |
| 7.00 | Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete | 5.79 | mt | 91,924 ₹5.3 L | 93,762.48 ₹5.4 L |
| 8.00 | RCC 1: 1/2 :3 mix using 20 mm ISS HBG metal for RCC items of work excluding items of works excluding centering,shuttering, and ost of reinforcement grill ,out including curing etc complete and also including fixing fan clamps and ixtures in rcc works wherever necessary as directed by departmental officer etc., complete. | 45.37 | cum | 9,305 ₹4.2 L | 9,491.1 ₹4.3 L |
| 9.00 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be got approved by the Executive Engineer before use on work. (Based on SoR 2024-25) | 99.76 | sqm | 308 ₹30,726.08 | 314.16 ₹31,340.60 |
| 10.00 | Plastering surfaces of RCC items such as slabs,beams,sunshades with cement mortar 1:3 -10mm thick including packing, providing cement mortar beading for sunshades staircase ,steps, lands slabs etc.,as directed by departmental officers etc, complete complying with standard specifications. | 43.08 | sqm | 327 ₹14,087.16 | 333.54 ₹14,368.90 |
Tender Value
₹33.5 L
EMD Value
₹34,000
Closing Date
11 Feb 2026, 4:00 pmClosed
BDO (VP)
Mannachanallur Panchayat Union
Construction of New Panchayat Office Building at Jeyanthirar nagar in koothur Panchayat.in Mannachanallur Panchayat Union in Tiruchirappalli District
2026_RDTN_651126_1
01/2026 02.02.2026
Open Tender
Civil Works - Buildings
Mannachanallur Panchayat Union
Construction of New Panchayat
Office Building at Jeyanthirar nagar in koothur
Panchayat.in Mannachanallur Panchayat Union in
Tiruchirappalli District
5 documents required · 5 mandatory
₹0
₹34,000
Yes
Mannachanallur Panchayat Union
11 Feb 2026
4 Feb 2026
11 Feb 2026
4 Feb 2026
11 Feb 2026
4 Feb 2026
4 Feb 2026
Construction of New Panchayat Office Building at Jeyanthirar nagar in Koothur Panchayat. Earth work excavation for foundation in all soils and sub soils to full depth etc., ordinary soil complete
Collection and supply of sand and filling in to the basement including cost and conveyance to the siteand all labour charges for filling as per standard speecifications.
Cement concrete 1:4:8 mix using 40mm iss HBG metal for foundation & flooring including labour charges etc., complete
Brickwork in CM 1:5 mix using country bricks ground maded of size 23 x 11 x 7 cm including cost and conveyance of all materials etc., complete.
Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X '3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification.
Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X '3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification.
Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete
RCC 1: 1/2 :3 mix using 20 mm ISS HBG metal for RCC items of work excluding items of works excluding centering,shuttering, and ost of reinforcement grill ,out including curing etc complete and also including fixing fan clamps and ixtures in rcc works wherever necessary as directed by departmental officer etc., complete.
Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be got approved by the Executive Engineer before use on work. (Based on SoR 2024-25)
Plastering surfaces of RCC items such as slabs,beams,sunshades with cement mortar 1:3 -10mm thick including packing, providing cement mortar beading for sunshades staircase ,steps, lands slabs etc.,as directed by departmental officers etc, complete complying with standard specifications.
Plastering with cm 1:5 mix( one cement and five sand ) to 12 mm thick including cost and conveyance of all materials in all floors etc.,as directed by departmental officers etc, complete complying with standard specifications.
Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).
Painting two coats with ready mixed Exterior Emulsion paint of approved qualityand colour over a priming coat, including through scrapping,clean removel of dirt etc complete .
Paving the flooring with special type of flooring tiles (Cement based Hydraulically Pressed Anti Skid Tiles (20 mm thick) in CM 1:3, 20 mm thick laid in-situ and pointed with same coloured cement as directed by the departmental officers.etc.
Dadooing the wall with Glazed tiles (colour and shade as directed) of size 300 mm x 200 mm x 6 mm in all walls over a base layer of cement mortar 1:2 (one cement and two sand ) 20mm thick laid in-situ and pointed with same coloured cement as directed by the departmental officers.etc.
Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.
Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M.Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sqm. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Providing weathering course with best quality of brick Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers.etc.
Finishing top roof mix one course machine pressed tiles of size 23 cm x 23 cm x 2 cm approved qty with,CM.1:3 12 mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same mortar etc
Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete
Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone M.Sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)
Fabricating Supply and fixing and position of MS doors with single leave.
Supplying and erecting pull and push type rolling shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc.,
Fabricating Supply and fixing and position of MS Windows with two leave.
Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone M.Sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone M.Sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).
Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting
Supply and Fixing of Cudappah slab including cost and all labour chrges etc.
Wiring with 2x1.5 sqmm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3 mm thick hylum sheet cover with TW switch box and 5 A FT switch and making good of the concealed portion with suitable colour for PVC concealed light / fan Point (for electronic regulator) (5 points per coil) (SD - 25)
Supply and fixing of single box type 4'40 W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS copper leads from terminals to the fitting (SD - 88)
Supply and fixing of CFC bulb (SD N0.83)
Supply and run of 2 of 1.5 sqmm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains (SD-64)
Supply and run of 2x1.5 sqmm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in 25 mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains (SD-69)
Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm downrod on the existing clamp (SD-110)
Wiring with 2x1.5 sqmm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150 mm x 100 mm x 113 mm TW switch box with 3 mm thick hylem sheet cover for 5 A 3 pin non interlocking wall socket with 5 A flush type switch with continuous earthwire connection of 1.5 sqmm copper wire and making good of the concealed portion with suitablecolour for concealed PVC plug point (SD-38)
Provision for Rain water down fall pipe arrangements etc., completed
Manufacturing, Supplying and Fixing of GI Hand rails for staircase near wet riser using 50mm dia 304L GI pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete
Supply and Fixing of RCC Jolly including material cost and all labour chrges etc.
110mm pvc Pipe 4ksc
110 mm PVC Elbow
110 mm PVC Door Elbow
110 mm PVC Tee
110 mm PVC Door Tee
PVC Adhesive solution
500 lit syntex tank
Provision and supply of steel grill gate of over all size 1.500 x 2.100 m using structural steel including all cost conveyance and all labour charges etc complete
Provision for RWH arrangements etc., completed 2 nos
Provision for name board charges
Provision for Photographic charges
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.26 MB
NIT.pdf
Tender Documents • 0.24 MB
Pricebid.pdf
Additional Documents • 0.78 MB
BOQ_780772.xls
BOQ • 0.31 MB
Techbid.pdf
Additional Documents • 1.25 MB
Download all tender documents and submit your bid