PROVIDING DWF THROUGH 100% FHTCS IN RAJAVOMMANGI IN RAJAVOMMANGI MANDAL

Drilling of Bore well by down the hole hammer drilling to a finished dia of 165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time. but excluding GST but including overheads and contractor's profit @ 13.615% .

Drilling of Bore well by down the hole hammer drilling to a finished dia of 112 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time.. but excluding GST but including overheads and contractor's profit @ 13.615% .

Cost & Supply of 180 mm dia PVC pipe class - 3 (6 Kgf/Cm2) as per ISI specification IS.4985/1988 with ISI mark

Cost & Supply of 140 mm dia PVC pipe class - 3 (6 Kgf/Cm2) as per ISI specification IS.4985/1988 with ISI mark

Slotting Charges of PVC Casing Pipe

Geological Survey Charges excluding taxes and Seigniorge charges but including overheads and contractor's profit @ 13.615%

Supply & Fixing of 180 mm dia PVC Bore well Cap

Supply and Transportation of 7.5 HP, 5-10 stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes: Kirloskar /Crompton /Texmo /KSB /Aryan/Varsha / Lubi. including overheads and contractor's profit @ 13.615% .

Fabrication , transportation and supply of suitable size panel board for single phase submersible motor 2 to 3HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of complete., Makes: C&S/LTLK/ Seimens/ BCH/ Crompton. complete.,. . excluding GST and seigniorage charges but including overheads and contractor's profit @ 13.615%

S& F 32 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete for pumping main but excluding GST etc complete.

Supply & Fixing of 63 mm dia HDPE Pipe 10 Kg/Cm2 for suction pipe and excluding GST etc complete.

Supply and fixing of 3 Core 2.50 Sqmm submersible cable wire

Supply and fixing of 7/16 alluminium Service wire

Supply and fixing of 32 Amps Fuse units

Supply and fixing of 32 mm MS long clampsets

Cost and fixing of 32 mm GI union

Supply and fixing of 32 mm dia GM Ball Valve

Supply and fixing of 32 mm dia GM NR Valve

Supply and fixing of 32 mm dia GI Flanges

Supplying and fixing of hose cabinet of size 750mm X 600mm x 250mm made of No 16 gauge SWG CRCA sheet with 6mm thick glazed glass door including necessary locking arrangement suitable to accommodate 2 Nos 15 mtr long Hose pipe, 1 No branch pipe, mounted on wall OR raised brick platform and duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant as required. Makes : As per list of recommended brands

Earth Work Excavation and depositing on bund with an initial lead of 10M and initial lift of 2M in all soils like block cotton and hard red earth as per ss 20B for foundations. For Pedastal for syntex

Filling the Foundation with sand including cost,conveyance ,watering and ramming etc complete.

Cement Concrete (1:4:8) using 40mm size HBG metal including cost and conveyance of all materials and labour charges etc complete. For Pedastal for syntex

Reinforced Cement Concrete (1:1.5:3) using 20mm size HBG metal including cost and conveyance of all materials and labour charges etc complete for Footing

Reinforced Cement Concrete (1:1.5:3) using 20mm size HBG metal including cost and conveyance of all materials and labour charges etc complete for Column

Reinforced Cement Concrete (1:1.5:3) using 20mm size HBG metal including cost and conveyance of all materials and labour charges etc complete for Slab Beam

Reinforced Cement Concrete (1:1.5:3) using 20mm size HBG metal including cost and conveyance of all materials and labour charges etc complete for Slab

Brick Masonry in CM (1:5) with Bricks Modular of traditional 2nd class including cost and conveyance of all materials and labour charges etc complete

Plastering with cement mortar (1:5) mix 20mm thick incluiding cost and conveyence of all materials and all labour charges etc complete

White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded

Supply and Fixing of 25 mm for Wiring GI pipe medium grade properties and weight as per IS 1239 with GI fittings such as elbows , tees, couplings,nipples, plugs including excavation for trenches complete except for GI bends, unions and Gi connectors with checkout and socket tata or zenith make or equivalent for pipeline ect., complete.

Construction of pipelines for water supply with HDPE PE - 100 Grade pipes as per IS 4984 - 1995 specifications, with its amendments and revisions thereon including supplying of pipes,necessary specials such as bends, Tees, etc. lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation for size 0.70 x 1.00 m (Manualy/machinery) pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete. The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work, but excluding taxes 90 mm dia HDPE - 6 KG/Cm2 - Pipe Line.The rate including cotractor profit 13.615% but excluding GST.

Construction of Valve Chambers Supply & Delivery of Tamper Proof DI Flanged Single Chamber 40 mm dia Air Release Valves PN - 1.6 on 90 mm dia 6 Kg/cm2 HDPE Pipe line with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG- 500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and exclusive of all taxes and transportation.

Earth work excavation in all type of soils with intial lead and lift etc complete

CC(1:4:8)using 40 mm HBG metal icluding Cost and conveyance of the all materials etc complete.

Filling the Foundation with sand including cost,conveyance ,watering and ramming etc complete.

M 30 grade concrete using 20 mm HBG metal including cost and conveyance of all the materials,but excluding the cost of the steel etc complete for bottom raft

M 30 grade concrete using 20 mm HBG metal including cost and conveyance of all the materials,but excluding the cost of the steel etc complete for Side walls

M 30 grade concrete using 20 mm HBG metal including cost and conveyance of all the materials,but excluding the cost of the steel etc complete for Top Doom

M 30 grade concrete using 20 mm HBG metal including cost and conveyance of all the materials,but excluding the cost of the steel etc complete for Ring Beam

Impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement including cost and conveyance of all the materials ect complete.

Cement plastering with CM(1:3),12mm thick including cost and conveyance of all the materials ect complete.

Snowcem painting including cost and conveyance of all the materials ect complete.

Supply and placing of the HYSD bars, fabrication including cost and conveyance of all the materials etc complete.

Existing Cutting open C.C. road surface with concrete saw cutter and removal with Breaker including cost and conveyance of all materials and labour charges etc complete

Plain Cement concrete (1:2:4) Nominal Mix using 20mm metal using Hand mix including cost and conveyance of all materials and labour charges etc complete For CC Road cutting Gap Filling

Construction of pipelines for water supply with HDPE PE - 100 Grade pipes as per IS 4984 - 1995 specifications, with its amendments and revisions thereon including supplying of pipes,necessary specials such as bends, Tees, etc. lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation for size 0.70 x 1.00 m (Manualy/machinery) pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete. The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work, but excluding taxes 63 mm dia HDPE - 6 KG/Cm2 - Pipe Line.The rate including cotractor profit 13.615% but excluding GST.

Construction of pipelines for water supply with HDPE PE - 100 Grade pipes as per IS 4984 - 1995 specifications, with its amendments and revisions thereon including supplying of pipes,necessary specials such as bends, Tees, etc. lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation for size 0.70 x 1.00 m (Manualy/machinery) pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete. The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work, but excluding taxes 75 mm dia HDPE - 6 KG/Cm2 - Pipe Line.The rate including cotractor profit 13.615% but excluding GST.

Construction of pipelines for water supply with HDPE PE - 100 Grade pipes as per IS 4984 - 1995 specifications, with its amendments and revisions thereon including supplying of pipes,necessary specials such as bends, Tees, etc. lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation for size 0.70 x 1.00 m (Manualy/machinery) pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete. The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work, but excluding taxes 90 mm dia HDPE - 6 KG/Cm2 - Pipe Line.The rate including cotractor profit 13.615% but excluding GST.

Construction of pipelines for water supply with HDPE PE - 100 Grade pipes as per IS 4984 - 1995 specifications, with its amendments and revisions thereon including supplying of pipes,necessary specials such as bends, Tees, etc. lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation for size 0.70 x 1.00 m (Manualy/machinery) pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete. The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work, but excluding taxes 110 mm dia HDPE - 6 KG/Cm2 - Pipe Line.The rate including cotractor profit 13.615% but excluding GST.

Construction of pipelines for water supply with HDPE PE - 100 Grade pipes as per IS 4984 - 1995 specifications, with its amendments and revisions thereon including supplying of pipes,necessary specials such as bends, Tees, etc. lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation for size 0.70 x 1.00 m (Manualy/machinery) pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete. The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work, but excluding taxes 125 mm dia HDPE - 6 KG/Cm2 - Pipe Line.The rate including cotractor profit 13.615% but excluding GST.

Supply and Fixing of 65 mm GI pipe medium grade properties and weight as per IS 1239 with GI fittings such as elbows , tees, couplings,nipples, plugs including excavation for trenches complete except for GI bends, unions and Gi connectors with checkout and socket tata or zenith make or equivalent for pipeline ect., complete.

Supply and Fixing of 50 mm GI pipe medium grade properties and weight as per IS 1239 with GI fittings such as elbows , tees, couplings,nipples, plugs including excavation for trenches complete except for GI bends, unions and Gi connectors with checkout and socket tata or zenith make or equivalent for pipeline ect., complete.

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves)(PN-1.6 MPa) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties , completed including supply of Sluice valve ,DI Specials to suit the pressure class of pipe, fixing with all fixtures and construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work but excluding GST - 63mm dia on HDPE Pipe

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves)(PN-1.6 MPa) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties , completed including supply of Sluice valve ,DI Specials to suit the pressure class of pipe, fixing with all fixtures and construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work but excluding GST - 75mm dia on HDPE Pipe

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves)(PN-1.6 MPa) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties , completed including supply of Sluice valve ,DI Specials to suit the pressure class of pipe, fixing with all fixtures and construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work but excluding GST - 90mm dia on HDPE Pipe

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves)(PN-1.6 MPa) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties , completed including supply of Sluice valve ,DI Specials to suit the pressure class of pipe, fixing with all fixtures and construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work but excluding GST - 110mm dia on HDPE Pipe

Construction of Function Hold Tap Connections (FHTC) with supply & fixing of PP Clamp Saddle manufactured by injection moulding (virgin resin of PE-80/PE-100 having blue /black colour using food grade compound raw material with quality assurance cerificate for usage in drinking water system and having working pressure of 10 bar for 65 to 180mm dia main with 1/2" service connection) and supply and fixing of required materials such as Non-return cum flow control valve (with all three parts made by using solid steel bars of 316, wth CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.50 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle as per CPHEO manual), compression fittings (ISO:17885-2015, PN 16 rating and manufactured from virgin resin of PE-80/PE100 having blue colour. Raw material must be as per BS:6920 for effect on water quality, should have moulded in SS 304/Nickel plated brass female threded outlet inserted to connection necessary fitting with threaded dimension conforming to IS 554/1507 which are Compression male/female threaded adaptor (with SS insert D20 mmx 1/2"), Compression male/female threaded elbow (with SS insert D20 mmx 1/2")), including supply, delivery and fixing of 15mm dia B class GI pipe as per IS1239 with necessay GI fittings including 20mm dia HDPE pipe 16.0 Kg/cm2 pipes, earth work of trench excavation up to 0.50m depth), and 12.7mm dia Brass Bib cock long body Indian make heavy duty excluding GST and Seigniorge charges, including contractor' profit & overheads @ 13.615%.

CC (1:2:4) mix Using 20mm HBG metal including cost and conveyance of all materials and all labour charges Etc., complete.

Supply and fixing of 90mm dia PVC 4kg/sqcm Pipe including cost and conveyance of all material and all labour charges etc complete.

(Rupees One Crore Forty Seven Lakhs Two Thousand Nine Hundred Eleven Only)