2-Rampur road isthit Ekta Vihar Yojana ke bagal se Pairadise Palm tak jaane wali sadak ka sudhar evam naali nirman ka karya.

Earth work by mechinical / manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift DSR item no. 2.2.1 (Rate 395.30)

Extra for compaction of earth work in embankment under optimummoisture conditions to give at least 95% of the maximum dry density (proctor density). DSR item no. 16.2 (Rate 24.85)

Construction of Granular Sub-Base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, compacted of work. as direted by Engineering in incharge. stone ballast granullar 53mm to 26.50mm @27.56%,26.5 to 9.5 mm @22.5%,9.5 to 4.75 mm @10%,4.75 mm below @mm below @40% all complete.( Analysis rate)

Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. compacted of work. as direted by Engineering in incharge. wirtth stone ballast granullar 45mm to 22.4 mm @30% ,22.4 to 2.36 mm @40% 2.36 mm to 75 micron @30% all complete.( Analysis rate)

Providing and applying Primer Coat with bitumen emulsion SS1 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means. All complete.( Analysis rate)

Providing and laying Dense Graded Bituminous Macadam with higher capicity batch type HMP using crushed aggregates of specified grading, premixed with 60/70 (VG-30) bituminous binder @ 4.50 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 505 complete in all respects. with density of mix 2.31 tone/cum with stone gritt 25mm to 10mm @30%,10-5 mm @28% 5mm &below @40% lime powder filler 2% by wt of aggregate all complete.( Analysis rate)

Providing and applying Tack Coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg/sqm on prepared bituminous surface cleaned with mechenical broom. MORTH ( Analysis rate)

Providing and laying Bituminous Concrete grading-II with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with 60/70 (VG-30) bituminous binder @ 5 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory smooth steel wheeled tendom roller for static & vibratory passages & with also penumatic tyre roller property to get required density 2.36 tone/cum with stone gritt 13.2 to 10 mm @21%, 10-5 mm @ 17% 5mm & below @60%, lime powder filler @2% by wt of aggregate all compleete and tandem rollers to achieve the desired compaction as per MORT&H specification clause No. 507 complete in all respects.( Analysis rate)

Providing and applying 2.5 mm thick road marking strips retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. DSR-2023/16.62 (Rate 747.80)

Provding and fixing Glow studs(Cats Eye) af size 100x 20m made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloetrite ) or HIP (High impact polystyrene ) of ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 Kg tested in accrodance with ASTM D4280. The slope of retro- reflective surface shall be 35(+/-5) degress to base. The reflective panels of both sides with at least 12 cm of reflective area up each side. The luminationce intensity should be as per the specification and shall be tested as described in ASTM I:809 as recommended in BS :873 part 4 :1973. Teh studs shall be fixed to the Road surface using the adhesive conforming to IS as per procedure recommended by the manufacturer complet and as per direction of engineer - in - charge DSR 2023 S.I. 16.50 (Rate 206.30) each