Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.2 LAccepted-AOC R O WARD NO 5 BRIJ NAGAR TEHSIL DISTT HAMIRPUR HP | L1 | Accepted-AOC Award | |
| 2 | L2₹4.9 L+₹10,880.95 (2.27%)Rejected-Finance VILLAGE BANOUN PO KHALANOO TEHSIL KOTLI DISTT MAND HP | MANDI | HIMACHAL PRADESH | 175001 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹5.1 L+₹34,621.08 (7.23%)Rejected-Finance RAJINDER KUMAR | CENTRAL DELHI | DELHI | 110054 | L3 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | NISHAT KUMAR L1 | Anupam Rana L2 | Rajinder Kumar L3 |
|---|---|---|---|---|---|---|
| 1.00 | Hiring of Hydraulic Excavator cum loader for cutting in earth work, removal of slips, cleaning of drains and catch pit / dressing of berm in all kinds of soil and trimming of side slopes and disposing of earth upto any lead from various sites of work with in all leads and lifts and to entir satisfaction of Engineer - in - Charge. Any loss to the public / private property or any accident etcetera happened during the course of hiring period shall be absolute responsibility of the contractor. The repair and spares including watch and ward of machines shall also be borne by the contractor / owner. The daily log book will be maintained at site which should be duly verified by the Engineer - in - Charge. | 24 | Hours | 1,400 ₹33,600 Lowest | 1,650 ₹39,600 | 1,500 ₹36,000 |
| 2.00 | Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer-in-Charge. | 64.32 | Cum | 435 ₹27,979.2 Lowest | 440 ₹28,300.8 | 450 ₹28,944 |
| 3.00 | Cutting of GI Pipe of various dia with generator welding set including carriage at site of work complete in all respect in all leads and lifts. 450 mm, 80 mm & 65 mm dia:- | 2,276.53 | CM | 2.85 ₹6,488.11 Lowest | 3.5 ₹7,967.86 | 3 ₹6,829.59 |
| 4.00 | Welding of GI Pipe of various dia with Diesel Generator Welding set at site of work according to site requirement in minimum three layers to make the joint leakproof according to relevant BIS Standards/Approved specifications and to the entire satisfaction of the Engineer-In-Charge complete in all respect in all leads and lifts. 450 mm, 80 mm & 65 mm dia:- | 6,829.6 | CM | 6 ₹40,977.6 Lowest | 7 ₹47,807.2 | 6.5 ₹44,392.4 |
| 5.00 | Providing, Laying, jointing and testing High Density Polyethylene pipes in trenches to required grade as per IS: 4984-1995 latest with upto date ammendments of following OD pipes material grade and class of pipe . The joint of pipe should be done by way of butt fusion welding as per relevent IS code and specification including all fittings and accessories e.g.coupling, tees bends, reducers screwed adopter flanged tail piece etc. including carraige of pipes as per direction and to the entire satisfaction of the Engineer-in-charge (earth work in trenches to be measured and paid for separately). 40 mm OD, PE-80 PN 6.0 | 250 | Rmt | 82 ₹20,500 Lowest | 85 ₹21,250 | 90 ₹22,500 |
| 6.00 | Providing and Fixing Cast Iron Sluice Valve of LEADER make BIS No. 14846 class PN 1.6 with flange Table 17 including welding of flanges. Nuts & Bolts and Gasket etc. The sluice valve conforming to IS- 780. The dia of valve as mentioned below complete in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. 250 mm diameter | 2 | Nos | 1,54,500 ₹3,09,000 | 1,51,500 ₹3,03,000 Lowest | 1,65,000 ₹3,30,000 |
| 7.00 | Providing and fixing Air release Valve Presuure Class rating PN-10 of Cast Iron Body double flanged as per BS:4504 with test pressure STP 10 Bar Hyd. LEADER make and of following diameters as per direction and to the entire satisfaction of Engineer in Charge. 80 mm diameter | 1 | No | 40,500 ₹40,500 Lowest | 42,000 ₹42,000 | 45,000 ₹45,000 |
Tender Value
₹4.6 L
EMD Value
₹9,200
Closing Date
26 Aug 2025, 5:00 pmClosed
Executive Engineer
EE JSV Mandi
Restoration of MS GI pipes with Cutting and Welding of 450mm 80mm and 65mm dia and Providing and fixing of Sluice Valve and Air release valve at Mathyani and Kandhi Nallah
2025_HPIPH_112645_1
6324-53
Open Tender
Civil Works
Item Rate
90 days
Mandi
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
₹9,200
29 Sept 2025
21 Aug 2025
26 Aug 2025
21 Aug 2025
26 Aug 2025
21 Aug 2025
Amount
Hiring of Hydraulic Excavator cum loader for cutting in earth work, removal of slips, cleaning of drains and catch pit / dressing of berm in all kinds of soil and trimming of side slopes and disposing of earth upto any lead from various sites of work with in all leads and lifts and to entir satisfaction of Engineer - in - Charge. Any loss to the public / private property or any accident etcetera happened during the course of hiring period shall be absolute responsibility of the contractor. The repair and spares including watch and ward of machines shall also be borne by the contractor / owner. The daily log book will be maintained at site which should be duly verified by the Engineer - in - Charge.
Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer-in-Charge.
Cutting of GI Pipe of various dia with generator welding set including carriage at site of work complete in all respect in all leads and lifts. 450 mm, 80 mm & 65 mm dia:-
Welding of GI Pipe of various dia with Diesel Generator Welding set at site of work according to site requirement in minimum three layers to make the joint leakproof according to relevant BIS Standards/Approved specifications and to the entire satisfaction of the Engineer-In-Charge complete in all respect in all leads and lifts. 450 mm, 80 mm & 65 mm dia:-
Providing, Laying, jointing and testing High Density Polyethylene pipes in trenches to required grade as per IS: 4984-1995 latest with upto date ammendments of following OD pipes material grade and class of pipe . The joint of pipe should be done by way of butt fusion welding as per relevent IS code and specification including all fittings and accessories e.g.coupling, tees bends, reducers screwed adopter flanged tail piece etc. including carraige of pipes as per direction and to the entire satisfaction of the Engineer-in-charge (earth work in trenches to be measured and paid for separately). 40 mm OD, PE-80 PN 6.0
Providing and Fixing Cast Iron Sluice Valve of LEADER make BIS No. 14846 class PN 1.6 with flange Table 17 including welding of flanges. Nuts & Bolts and Gasket etc. The sluice valve conforming to IS- 780. The dia of valve as mentioned below complete in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. 250 mm diameter
Providing and fixing Air release Valve Presuure Class rating PN-10 of Cast Iron Body double flanged as per BS:4504 with test pressure STP 10 Bar Hyd. LEADER make and of following diameters as per direction and to the entire satisfaction of Engineer in Charge. 80 mm diameter
Anupam Rana (BID ID -547122)
Rajinder Kumar (BID ID -547094)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .