GENERAL

Earthwork excavation in Ordinary soil by Mechanical Means upto 3 m depth for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1(B)) - 1 Cum SoR 2023-24

Carting away the surplus excavated earth from the work site with a lead of 3 km beyond initial lead including loading, unloading and conveyance but excluding stacking charges etc., complete - 1 Cum.

Filling of Stone Crusher Dust for foundation trenches including cost and conveyance off all materials and all labour charges ramming,watering etc, as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete. (supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 m.) (P.H Item, P.56) (PE-100 6kg/sqcm)

Manufacture, supply and delivery of H.D.P.E (PE-100 Grade) Fittings conforming to IS 4984-1995 including transportation to any where in A.P Excluding Taxes.

(b) 110mm dia Pipe Ends Long Neck (Collars)

(c) 110mm dia M.S Flanges

(d) 110mm dia HDPE TEE

(e) 110mm dia HDPE End Caps (Dummies)

Supply and delivery of Bolts and Nuts with double washers including taxes and conveyance etc., complete. (1/2 " to 1 ")

Supply and delivery of Rubber Packing including taxes and conveyance etc., complete (3 mm / 6 mm thick).

Supply, laying and jointing of C.I.D Joints complete with rubber rings including filling with water, including cost of jointing Material etc., complete.

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)-RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.

Labour charges for lowering and keeping in position of C.I. Sluice valves(with cap/with hand wheel), reflux valves and scour valves.

Manufacture, Supply and Delivery of Cast Iron Pipes and Fittings (spls.) Conforming to IS. No. 7181/1986, 5531/1988, 3950/1979 and C.I.D Joints confirming to IS No.8794/1988 at site of work anywhere in A.P. Including, loading, unloading, transportation to site of work stacking at site transit risk and package, excluding taxes and duties

Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634 –part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure (as per SSR 2014-15 Page No.4)

Engaging of labour including all charges as etc., complete

Filling of Stone Crusher Dust for foundation trenches including cost and conveyance off all materials and all labour charges ramming,watering etc, as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH

Laying of Plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 / 53 grade at cement as per Clause 1501.2.2 M30 (Grade) at 400 kg per cum, coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork, spreading the concrete with shovels, rakes, compacted using needle and plate vibrators and finished in continuous operation including curing of concrete slabs for 28- days and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.

Provision for Seignorage charges

Provision Towards merit 2%

Provision Towards DMF 30%

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.739 %

Unforeseen item