Improvements to Roads

Scarifying the existing B.T surface to a depth of 50 mm by Mechanical means and disposal of scarified material with all leads and lifts upto 1000 Mtrs as per MoRT&H (5th Revision) Specn. No.305.4.3 for the Bandaluppi - Jamadala road from Km.3/0 to 3/4.

Scarifying the existing B.T surface to a depth of 50 mm by Mechanical means and disposal of scarified material with all leads and lifts upto 1000 Mtrs as per MoRT&H (5th Revision) Specn. No.305.4.3 for the M.R.Nagaram to SangamValasa from km 0/0 to 2/0.

Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem specification ( 5th Revision) as per Table 400-13, including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification.406 (5th revision) for finished item of work. for the Bandaluppi - Jamadala road from Km.3/0 to 3/4.

Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem specification ( 5th Revision) as per Table 400-13, including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification.406 (5th revision) for finished item of work for the M.R.Nagaram to SangamValasa from km 0/0 to 2/0.

Providing and applying prime coat with bitumen emulsion (SS1) Bulk using emulsion pressure distributor on prepared surface of granular base including clearing of road surface and spraying emulsion at the rate of 0.70 kg/sqm using emulsion pressure distributor for finished item of work etc., complete as per MoRT&H Specification 502 (5th revision) and as directed by the Engineer-in-charge for the Bandaluppi - Jamadala road from Km.3/0 to 3/4.

Providing and applying prime coat with bitumen emulsion (SS1) Bulk using emulsion pressure distributor on prepared surface of granular base including clearing of road surface and spraying emulsion at the rate of 0.70 kg/sqm using emulsion pressure distributor for finished item of work etc., complete as per MoRT&H Specification 502 (5th revision) and as directed by the Engineer-in-charge for the M.R.Nagaram to SangamValasa from km 0/0 to 2/0.

Providing and applying tack coat with bitumen VG-10 (Bulk) using Bitumen pressure distributor at the rate of 0.25 kgs per sqm on the prepared Granular surface treated with primer cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge for the Bandaluppi - Jamadala road from Km.3/0 to 3/4.

Providing and applying tack coat with bitumen VG-10 (Bulk) using Bitumen pressure distributor at the rate of 0.25 kgs per sqm on the prepared Granular surface treated with primer cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge for the M.R.Nagaram to SangamValasa from km 0/0 to 2/0.

Providing and applying Tack coat with Bitumen (VG-10) (Bulk) using Bitumen pressure distributor @ 0.20 kgs per sqm on the prepared bituminous/granular surface cleaned with mechanical broom, etc., complete for finished item of work as per MoRT&H Specification 503 (5th revision) for the Bandaluppi - Jamadala road from Km.3/0 to 3/4.

Providing and applying Tack coat with Bitumen (VG-10) (Bulk) using Bitumen pressure distributor @ 0.20 kgs per sqm on the prepared bituminous/granular surface cleaned with mechanical broom, etc., complete for finished item of work as per MoRT&H Specification 503 (5th revision) for the M.R.Nagaram to SangamValasa from km 0/0 to 2/0.

Providing 30mm thick compacted Bituminous Concrete with 100-120 TPH Batch Type Hot Mix Plant using HBG crushed aggregates of Grading – 2 as per table 500-17, premixed with Bituminous binder of VG 30 Grade as per jobmix formula with a minimum of 5.4% by mass of total mix and filler, transporting the hot mix to work site, laying with hydrostatic sensor paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H Specification 507 (5th Revision) complete for finished item of work in all respects as directed by Engineer-in-Charge for the Bandaluppi - Jamadala road from Km.3/0 to 3/4.

Providing , laying of close graded premix surfacing material ( Mixed seal surfacing) of 20 mm thickness by hot mix plant using hard blasted granite crushed aggregates of 13.2 mm to 0.09 mm (Type 'B') as per table 500-19 of specification 508 of MoRT&H (5th Revision), premixed with bituminous binder VG-30 (60/70) grade @ 19.00 Kg per 10 Sqm area, including cost of all materials and transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled roller 8 to 10 Tonnes as per MoRT&H (5th Revision) Specification No. 508 complete for finished item of work in all respects as directed by Engineer-in-charge for the M.R.Nagaram to SangamValasa from km 0/0 to 2/0.

Providing B.T. patch work for pot holes using 20mm HBG metal with required quantity of 10 to 12mm size HBG key chips and 72 Kgs of bitumen VG-10 (80/100) grade per one cum of work for filling the pot holes including removal of loose material in the pot holes trimming the edges to provide form vertical faces cleaning applying tack coat filling the pot holes compacting and finishing including cost and conveyance of materials, T&P charges and all labour charges for all operations etc., complete for finished item of work as directed by the Engineer-in-charge for the Bandaluppi - Jamadala road from Km.3/0 to 3/4.

Providing B.T. patch work for pot holes using 20mm HBG metal with required quantity of 10 to 12mm size HBG key chips and 72 Kgs of bitumen VG-10 (80/100) grade per one cum of work for filling the pot holes including removal of loose material in the pot holes trimming the edges to provide form vertical faces cleaning applying tack coat filling the pot holes compacting and finishing including cost and conveyance of materials, T&P charges and all labour charges for all operations etc., complete for finished item of work as directed by the Engineer-in-charge for the M.R.Nagaram to SangamValasa from km 0/0 to 2/0.

Forming shoulders with borrowed useful seclected earth having MDD of not less than 1.75 gms/cc from outside road boundary by mechnical means with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with vibratory road roller @ OMC to meet requirement of table 300-2 of MORT&H including all hire and operational charges of T&P , complete for finished item of work as per MORT&H specification 305 (5th revision) for the Bandaluppi - Jamadala road from Km.3/0 to 3/4.