PROVN OF WK FOR CONSTR OF ONE TOILET BLOCK URINAL WC NEAR JCO CLUB BLDG NO OW 64 OF 891 FD REGT AND CERTAIN SANCTIONED WORKS AT ALHILAL MIL STN

Amount

SCHEDULE 'A' PART -I: Surface excavation not exc(not exceeding) 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified.

Excavation in trenches in type of soil not exc.1.5 m wide and not exc.1.5m deep and getting out complete all as specified.

PCC M-10 type C-2 (Nominal Mix) using 40mm graded crushed stone aggregates as in foundation filling and mass concrete complete all specified.

M&L brickwork with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all specified.

M&L TMT bar 10mm dia and over cut to length, bent to shape required including cranking bending and binding with and including mild steel wire (annealed) not less then 0.9mm dia complete all as specified.

All as per the description of serial item No 05 above but 6 mm to 8 mm dia.

Returning filling in soil including spreading , leveling , watering &well ramming if layer not exceeding 25 cm thick complete all as specified.

Removel of excavation soil to a distence n. exc. 50m and depositing where directed at level n. exc. 1.5m above the starting point complete all as specified .

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed .

Formwork to sides and soffit of floor or roof beams beam haunching, girders, lintels, cantilever, shelves including supports ,overhangs etc complete all as specified.

M&L reinforced cement concrete (design mix) M-25 using 20mm graded aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified.

M&L reinforced cement concrete (design mix) M-25 using 20mm graded aggregate in beams, cantilvers, bressummers, lintels over 1.50 m span complete all as specified.

M&L reinforced cement concrete (design mix) M-25 using 20mm graded aggregate in, columns, pillars, piers, posts and struts etc.; basement slabs, under reamed piles and mass concrete complete all as specified.

S&F roof trusses (framed), trussed, purlins, crane girders, purlins, crane gantries, rails and fastenings and heavy brackets including distance pieces, cleats etc. all as specified.

Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with J hooks as spfd, complete all as specified and directed.

Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L painting steel surfaces of any description, over 10cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L for broken stone boulders hard core of gauge n. exc. 63 mm deposited, spread & levelled in layers n. exc. 15 cm thick watered & rammed to a true surface complete all as specified and directed.

M&L 100mm thick Plain cement concrete (nominal mix) type C-2, 1:3:6 using 40mm graded aggregate as in sub base of floor and the like all as specified.

M&L 25mm thick, M-15, plain cement concrete, type B-0 (using 12.5 mm graded crushed stone aggregates) as in floors finished rough surface to receive floor finishes, complete all as specified.

M&L machine cut kota stone flooring 18 to 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including screeding bed 15mm thick in CM 1:4 complete all as specified and directed.

M&L non-skid, ceramic, coloured tiles 7 to 8mm thick (Square/rectangular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors, set and jointed in cement slurry and pointed in white or coloured cement to match with the shade of tiles including screed bed or bedding layer of 15mm thick in CM 1:4 complete all as specified and directed.

M&L non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors bedded and jointed in neat cement slurry, including pointed in white or colourred cement to match over including 15mm thick screed bed or bedding layer in cement mortar 1:4, complete, all as specified.

M&L glazed ceramic coloured tiles 300mm x 200mm x 6 to 7 mm thick as in vertical surfaces such as skirting, set and jointed in neat cement slurry, pointed in white or colourred cement to match over including 10mm thick rendering in cement mortar 1:4, complete, all as specified complete, all as specified.

75mm thick cement concrete M-10 (Nominal mix), type C-1, (using 20mm graded aggregate) as in plinth protection finished fair & even without using extra cement including filling of joints with mastic filling (one part of bitumen and 03 parts of sand) complete all as specified and directed.

M&L 15 mm thick plastering in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete, all as specified.

All as per the description of serial item No 27 above but 10 mm thick in cement mortar 1:6 as on internal surfaces.

Pressed steel frames of size 125x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed .

Steel ventilator with top hung shutter incl hinges, steel peg stay, complete with glazing bars dove tailed or welded, complete all as specified and directed .

Preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint to walls complete, all as specified.

Preparation of new plastered or unplastered wall surfaces and applying two coats of oil bound distemper white or tinted, complete all as spfd and directed .

2nd class hard wood (Sal / Hollock) factory made, plain framed, panelled shutters (two panels) with lock rail and panel of 12mm veneered particle board with commercial veneers on both faces. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick fitted to chowkates, complete all as specified.

2nd class hard wood (Sal / Hollock) factory made glazed and skelton shutters 35 mm thick, open rebated and prepared to receive glass or guage,etc. (without sash bars) edges of framing plain, chamferred or rounded, fitted with cut & mitred beads for securing guage sizes of members of shutters as specified in SSR Part-I Section 8.20 (a) for door shutter supplying and fitted to chowkhats, complete all as specified.

Steel window side hung glazed and gauged shutters incl projecting type hinges with steel handle and steel peg stay complete with glazing bars dove tailed or welded complete all as specified and directed .

S&F anodised aluminium Powder coating window and ventilator shutters fixed type without sash bars, aluminium section weight of 0.55 kg/*m including necessory joining cleats, glazing clips, rubber neoprane packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified. Note: window/ventilator glass pane measured and paid seperately.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width struck side with solvent cement for slice and plane colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap inserted for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MX frame welded/sealed to the style and rails with suitable PVC sheet beeding and joined together with solvent cement complete all as specified.

Aluminium, anodised, barrel tower bolts of extruded section and fixed of size 150 mm

Aluminium handles, cast type, anodised of size 150 mm

Mild steel cold rolled butt hinges medium weight 100 mm long, complete all as specfied.

300 mm long mild steel helical door , springs including roller and roller plate enamelled black fixed to wooden chowkat, complete all as specified.

Mild steel sliding door bolt plate type stove enamelled black with 250 mm bright bolt not less 12mm dia with and incl a mini of 6 bolts and nut, four on bolt plate and two on staple plate and fixed

Galvanised mild steel wire cloth 0.457 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire stapples, complete all as specified.

Prepartion of new wooden surfaces and applying two coats of synthetic enamel paint over one coat of pink primer exceeding 10cm widht or grith,complete all as specified.

3 mm thick sheet glass ordinary quality, sheet glass and glazing with oil putty or wooden beads in squares not exceeding 0. 50 Square metre in each pane, complete all as specified.

S&F GI frame work 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit / tie / purlins etc, at approx 900 mm centre to centre with GI cleat and steel suspenders of appropriate size fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, including provision of 12 mm thick Gypsum board , ISI marked , fixed to snap grid frame works 605 x 605 mm as in ceiling, flat or sloppy as per manufacture's instructions, complete all as specified and directed.

Vitreous china, wash hand basin, (white) of size 550mmx400mm including brass CP waste coupling 32mm dia with long screwed shank and fly nuts, PVC medium grade 32mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15mm dia, 450mm long with brass CP nuts and washers at both ends, complete all as specified and directed.

S&F looking mirror bevelled edge 600x450mm mounted over 4mm thick AC board or 6mm thick plywood commercial fixed with brass screws and cup washers.

Rotational moulded polyethylene water storage tank 1000 Ltrs capacity, ISI marked (cylindrical vertical with closed top), double wall layer construction, hoisted and fixed in position complete all as specified in SSR Part-I, making connections including 20mm bore ball valve brass float valve with ploythene float and fly nut all as specified.

10 ltr capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32mm dia PVC flushing pipe and 15mm dia 450mm long PVC connection with CP brass coupling nuts and PVC washer at both ends complete all as specified and directed.

S&F vitreous china down water closet pan white orrisa pattern size 580x440 mm (excluding flushing cistern and flush pipe) including connection into trap and flush pipe including making good the disturbed portion of floor complete all as specified and directed.

S&F Vitreous china urinals, bowl type comp including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing securing urinal to plugs with and including 60 mm long brass screw including flushing cistern and flushing pipe complete all as specified and directed.

Steel water tubing 15mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

All as per the description of serial item No 54 here-in-before but 20 mm bore.

All as per the description of serial item No 54 here-in-before but 25 mm bore.

Stop valve cast copper alloy, screwed down, high pressure with crutch of butterfly handle, screwed both ends for iron pipe or for unions of 25mm bore and fixed complete all as specified .

S&F 25 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both endsfor ironb pipe 25mm bore and fixed complete all as specified .

Pillar taps 15mm cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot of Cold with long screwed shanks and ply nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F Chromium plated bib tap, 15mm cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F Low density polythene pipe connection 450mm long suitable for connecting 15mm bore GI pipe including PTMT nuts on both ends complete all as specified and directed.

S&F Chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed.

15mm bore stop valve, cast copper alloy fancy type chromium plated screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union complete all as specified and directed.

S&F curtain rails harrison rails, mild steel, chromium plated with chromium plated with fixing brackets,stops,rollers etc.complete all as specified and directed.

Tubular towel rail, 20mm dia, 60 cm long, CP with a pair of brackets, fixed to wall with CP brass screw and PVC rowl plugs, complete all as specified and directed.

Rolling and consolidating formation surfaces in cutting with hand roller exc 0.2 tonne and n.exc 0.5 tonne complete all as specified and directed.

75mm thick , Plain cement concrete, M-15 (Nominal Mix), type B-2 (using 40mm graded crushed stone aggregates) as in sub base of floor and path etc, complete all as specified and directed.

M & L for pavement quality control concrete design mix (M-40) using crushed stone aggregates having minimum field flexural strength of 40 Kg/Sq cm in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less & compressive strength 40 N/Sqmm in pavement laid to level, gradient & camber including necessary form work, complete all as specified and directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide and used to edges primed with primer suitable for sealing compound Grade 'A', complete all as specified and directed.

Formation of 20mm thick expansion joint filled with pre modified bituminous filler and top 30mm primed and sealed with sealing compound Grade 'B' complete all as specified and directed.

Excavation in trenches exc 1.5m wide and n exc 3.0 m in depth for foundation etc, cess pit, manhole in pipe line n exc 10 sqm on plan and getting out in any type of soil complete all as specified.

PCC M-15, type B-1(using 20mm graded crushed stone aggregate) as in coping including weathering slightly rounded or chamferred angles and throading complete all as specified.

M&L precast cement concrete type B-1, 1:2:4 (20mm graded aggregate) set in CM 1:4 as in cover slab (for manholes etc) with similar articles with plain faces complete all as specified.

Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius, using old size brick, build in CM 1:4 complete all as specified.

Rendering 15mm thick on brick surfaces in CM 1:6 finished even and smooth without using extra cement including mixing of water proofing admixture in the proportion as mentioned in manufacture's instructions complete all as specified. Note: Water proofing mixture shall be measured and paid for separately.

Supply only integral water proofing compound complete all as specified and directed.

Concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete M-10 (nominal mix) using 20mm graded crushed stone aggregate for 150mm bore pipes complete all as specified and directed.

Salt glaged stone ware (SGSW) grade 'A' drain pipes 150mm bore laid and jointed on concrete bed, complete including testing etc all as specified.

M&L reinforced cement concrete, M-15 (nominal mix) type B1 (using 20mm graded stone aggregates) in slabs supported on walls, beams, and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.

M&L, reinforced cement concrete, M-15 (Nominal Mix), type B-1(using 20mm graded crushed stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams, roof beams, bands, bases for columns, etc.; basement slabs, under reamed piles and mass concrete etc, complete all as specified and directed.

Formwork to sides and soffits of suspended slab such as roof slabs, floor slabs, landings and similar works not exceeding 200mm thick (horizontal or sloping), complete all as specified.

M&L Loose filling with brick aggregates of gauge 40 to 80 mm in soakage pits, soakage wells complete all as specified and directed.

M&L Brick work honey combing in one brick thick wall built CM 1:4 complete all as specified and directed.

Walling of random rubble stone masonry uncoursed, with best quality locally available harder stones such as granite, trap, basalt stone etc, well bonded, bedded and solidly hearted , built in cement mortar 1:6, complete all as specified and directed.

M&L 15 mm thick plastering in cement mortar 1:4 on stone masonry surfaces or surfaces other than fair faces of brick work or one side of lathing finished even and smooth without using extra cement, complete all as specified and directed.

Mild steel TMT bars 5mm dia and over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed .

Reinforced cement concrete M-25 (Design mix), type B-1 (using 20mm graded crushed stone aggregates) as in slab suported on walls, beams and colums in floors, roofs, landings and balconies, deck slab and in shelves etc., complete all as specified and directed.

M&L non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors bedded and jointed in neat cement slurry , including pointed in white or colourred cement to match over including 15mm thick screed bed or bedding layer in cement mortar 1:4, complete, all as specified.

Pressed steel frames of size 125x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed .

Preparation of new plastered or unplastered surfaces of walls and applying three coat white wash to walls complete, all as specified and directed.

Preparation of new plastered or unplastered surfaces of walls and applying three coat white wash to ceiling complete, all as specified and directed.

4mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

Rotational moulded polyethylene water storage tank 500 Ltrs capacity, ISI marked (cylindrical vertical with closed top), double wall layer construction, hoisted and fixed in position complete all as specified in SSR Part-I, making connections including 20mm bore ball valve brass float valve with ploythene float and fly nut all as specified.

Stop valve cast copper alloy, screwed down, high pressure with crutch of butterfly handle, screwed both ends for iron pipe or for unions of 25mm bore and fixed complete all as specified .

Angle valve cast copper alloy fancy type, chromium plated screwed down for high pressure screwed down for 15mm bore with crutch or butterfly handle both ends screwed for iron pipe or union etc, all as specified.

Vitreous china coloured wash down water closet pan (Padestal Pattern), including connection to flush pipe, 'P' or 'S' trap, with fixing bolts PVC seat cover with chromium plated mild steel hinges device (excluding flushing cistern and flush pipe), complete all as specified and directed.

Jet for pedestal pan, chromium plated of standard size complete all as specified and as directed.

Vitreous China urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brassscrews, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

CP Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms), complete all as specified and directed.

M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick in mortar 1:6, complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out getting out in hard/dense soil complete all as specified and directed.

Rendering 10 mm thick on fair faces of brick work or concrete surfaces in Cement Plaster 1:6 and finished the surface fair and even complete all as specified and directed.

Plain cement concrete, M-15 (Nominal mix), type B-0 (Using 12.5mm graded stone aggregates) as in filling of steel chowkats or frames, complete all as specified and as directed.

SCHEDULE 'A' PART -II: Point wiring with 1.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC surface casing 'N' capping double lock type to be fixed with the help of rawal plugs & screws incl all fittings such as Tee, connector pieces, L-junction etc on joints including CI/MS/PVC sunk boxes for mounting switches, sockets, regulators etc with 3 mm thick plastic laminated sheet cover of adequate size for one light/fan/bell point controlled by one switch and making good disturbed surfaces with CM (1:4) to match with the existing surface complete all as specified and directed.

All as per the description of serial item No 105 above but for 5 pin switch socket outlet 5 Amp on independent board complete all as specified.

Point wiring with 2.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 2.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC surface casing 'N' capping double lock type to be fixed with the help of rawal plugs & screws incl all fittings such as Tee, connector pieces, L-junction etc on joints including CI/MS/PVC sunk boxes for mounting switches, sockets, regulators etc with 3 mm thick plastic laminated sheet cover of adequate size for 3 pin switch socket outlet 15/20 Amp on independent board and making good disturbed surfaces with CM (1:4) to match with the existing surface complete all as specified and directed.

Supply and fixing switch piano flush button types 5 Amp single pole one way complete as specified.

Supply and fixing Socket outlet 5 pin, 5amp, flush type complete as specified.

Supply and fixing socket outlet 2 in 1, 3 pin, 5 and 15 Amp, flush type universal Complete all as Specified.

Ceiling rose 3 terminal bakelite 65mm x50mm surface type complete all as specified and directed.

Supply and fixing regulator for fan 1200/1400mm sweep electronic type 230 Volt AC, 300 W complete all as Specified.

S&F LED batten with LED rod complete T-8, 1x18 W including provn of flexible cable 3 core, 23/.0076 from ceiling rose to connector complete all as specified and directed.

Supply and fixing batton holder with LED Bulb 7 W complete all as Specified.

S&F LED Bulk Head 10W with pressure plastic housing with clear prismatic diffuser, high efficient LEDs IP66 complete all as specified and directed.

Supply & fixing ceiling fan AC single phase 240V of size 1200 mm five star rating with all accessories complete all as specified and directed.

Supply & fixing exhaust fans AC single phase 230V of size 250 mm (PVC body) with louvers shutter including making/repairing hole in brick/stone wall as per site reqmt and making good disturbed surfaces, complete all as specified and directed.

S&F sheet metal enclosures distribution board single pole and natural 8 way with 200 Amps rated bus bar 240 V, double door type complete all as specified and directed.

Supply and fix MCB SPN 240 volts, 10kA, 50 Hz of capacity 40-63 Amps 'C' series all as specified and directed.

Supply and fix MCB SP 240 volts, 10kA, 50 Hz of capacity 6-32 Amps 'C' series all as specified and directed.

M&L for 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1m apart including 4mm dia suspension GI wire with stranded conductor 10sqmm twin core cable flat or circular including taking down old unserviceable cable and stacking at site, complete all as specified.

S&F sheet metal enclosures distribution board single pole and natural 2 way with 200 Amps rated bus bar 240 V, double door type complete all as specified and directed.

M/S Bharmouri Construction

VIVEKA ENTERPRISES