Construction of Additional accommodation of Govt. School at Purba in Tehsil Dheera, Distt. Kangra (H.P.)

Amount

Excavation in foundation, trenches etc. in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, de-watering and/or removal of slush and incidentals, lift upto any heights, stacking the excavated soil not more than 3 mtrs (Three meters) clear from the edge of excavation and then returning the stacked soil in15cm (Fifteen centimeter) layers, when required into plinths, sides of foundation etc; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Excavation in drain and channels etc. in all kinds an classification of soil viz, pick work, pick jumper work ,pick jumper blasting works, jumper blasting work, blasting work hard blasting including chiseling and doing work in saturated soil including shoring, strutting and pumping or bailing out water (Surface and Sub soil water) up to any depth stacking the excavated material clear from the edge of the excavation as per the direction of Engineer-in-Charge and then returning the stacked soil in 15 cm (Fifteen centimetre) layers when required into sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimeters)thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimeters),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work Vertical surfaces such as walls, any thickness ,partitions and the like i/c attached pillasters buttresses plinth and string courses and the like The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates 3.15mm.(Three decimal fifteen milimetre) thick welded with angle iron in frame 30x30x5mm.,(Thirty into thirty into five milimetre)so as to give a fair finish including centring,shuttering strutting and proping etc. with wooden battens and ballies including dewatering/ pumping or bailing out water wherever required at site complete upto any heights/ depth of propping and centering below supporting floor to ceiling and removal of the same for insitu- reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates 3.15mm. (Three decimal fifteen milimetre) thick welded with angle iron frame 30x30x5mm (Thirty milimetre into thirty milimetre into five milimetre ).,so as to give a fair finish including centering shuttering, strutting and propping etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Edges of slab and breaks in floors and walls under 20cm (Twenty centimetre. wide. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete 1:5:10 (One cement isto Five Sand isto Ten graded crushed stone aggregate 40mm (Forty milimetre) nominal size) in haunching of stone ware pipe of 230mm (Two hundred thirty milimetre) internal diametres including concrete for bedding necessary form work and curing complete within all leads, lifts and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete nominal mix 1:4:8 (One cement Four sand :Eight graded ursed/broken stone aggregate 40mm) (forty millimeters nominal size) mechanically mixed and curing complete, excluding cost of form work in foundation and plinth, within all leads, lifts of materials and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete 1:2:4 (One Cement: Two Sand: Four graded crushed stone aggregate 20mm (Tweny milimetre) nominal size, mechanically mixed and vibrated including curing complete cost of form work and reinforcement for reinforce concrete work in vertical walls (any thickness). The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete 1:2:4 (One cement: Two sand:four graded crushed stone aggregate 20 mm (Twenty milimetre) nominal size mechanically mixed and vibrated and curing complete so as to obtain minimum crushing strength of M-20 grade and curring complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor, roofs landings and shelves and their supports, balconies, beam girders bressumers and cantilevers upto all floor levels/ heights Coffer etc. including carriage of materials within all leads and lifts of materials and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing, laying (to level or slopes) and jointing with stiff mixture of cement mortar in the proportion of 1:1 (One Cement: One Sand) salt glazed stoneware pipes grade ‘A’ of the 150mm ( One hundred fifty milimetre) internal diameters including tasting of pipes and joints complete: including carriage of materials within all leads and lifts of materials and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 20mm ( Twenty milimetre) nominal bore to wall ceiling and floor galvanised mild steel tube ( heavy grade ) and tube fitting with clamps including making good the walls ceiling and floor including carriage of materials within all leads and lifts of materials and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates 3.15mm.(Three decimal one five milimetre) thick welded with angle iron in frame 30x30x5mm.,(Thirty into thirty into five milimetre)so as to give a fair finish including centring,shuttering strutting and propping etc. with wooden battens and ballies upto all heights/ depth of propping and centering below supporting floor to ceiling upto all height and removal of the same for insitu- reinforced concrete and plain concrete work in Foundation, footings basis of columns etc. and mass concrete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters)thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimeters),so as to give a fair finish including centring, shuttering, strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders lintels, sides, and soffits of beams, beam, hunchings, cantilevers, bressumers and lintels upto all depths within all leads, lifts of materials and other incidentals as per approved drawing, design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates 3.15mm. (Three decimal fifteen milimetre) thick welded with angle iron frame 30x30x5mm (Thirty milimetre into thirty milimetre into five milimetre).,so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling upto all heights and removal of the same for in-situ reinforced concrete and plain concrete work in stair cases with slopping or stepped soffits excluding landing including carriage of materials within all leads and lifts and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates 3.15mm.(Three decimal fifteen milimetre) thick welded with angle iron in frame 30x30x5mm.,(Thirty into thirty into five milimetre)so as to give a fair finish including centring,shuttering, strutting and propping etc. with wooden battens and ballies complete upto all heights/ depth of propping and centering below supporting floor to ceiling upto all height and removal of the same for insitu- reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like including carriage of material within all leads, lifts and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates 3.15mm. (Three decimal one five milimetre) thick welded with angle iron frame 30x30x5mm (Thirty milimetre into thirty milimetre into five milimetre ).,so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies for all heights/depths of propping and centering below supporting floor to ceiling upto all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Edges of slab and breaks in floors and walls under any thickness, the rate is inclusive of all leads and lifts of materials and other incidentals as per approved drawing, design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying reinforced cement concrete 1:1.5:3 (One cement: one and half sand :three graded crushed or broken stone aggregate 20 mm (Twenty milimetre) nominal size) mechanically mixed and vibrated and curing complete so as to obtain minimum crushing strength of M-25 grade and curring complete excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts above plinth level to any level. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals as per approved drawing, design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying reinforced cement concrete 1:1.5:3 (One cement: one and half sand :three graded crushed or broken stone aggregate 20 mm (Twenty milimetre) nominal size )mechanically mixed and vibrated and curing complete so as to obtain minimum crushing strength of M-25 grade and curring complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landing and shelves and their support balconies, lintel beams, girders, breassumers and cantilever up to all floor level including carriage of material within all leads, lifts and other incidentals as per approved drawing, design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying reinforced cement concrete 1:2:4 (One cement: one and half sand :three graded crushed or broken stone aggregate 20 mm (Twenty milimetre) nominal size )mechanically mixed and vibrated and curing complete so as to obtain minimum crushing strength of M-20 grade and curring complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landing and shelves and their support balconies, lintel beams, girders, breassumers and cantilever up to all floor level including carriage of material within all leads, lifts and other incidentals as per approved drawing, design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying reinforced cement concrete 1:1.5:3 (One cement: one and half sand :three graded crushed or broken stone aggregate 20 mm (Twenty milimetre) nominal size )mechanically mixed and vibrated and curing complete so as to obtain minimum crushing strength of M-20 grade and curring complete excluding cost of form work and reinforcement for reinforced concrete work in Spirl stair casses including landing up to all floor level including carriage of material within all leads, lifts and other incidentals as per approved drawing, design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing Tor steel reinforcement for Reinforced cement concrete work including cutting, straightening, bending, binding and placing in position and including cost of binding wire complete for all floor level including carriage of materials within all leads and lifts and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Second class brick masonry in common burnt clay building bricks in super structure above plinth level upto all floor level in cement mortar 1:6 (One Cement is to Six Sand). The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

2nd class half brick masonry using common brunt clay building bricks in cement mortar 1:4 (One cement: four Sand ) in superstructure above plinth level in all floors including carriage of materials within all leads and lifts of materials and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing angle iron door , windows, clerestory window frame (Single rebate) manufactured from M.S. angle iron section of 40x40x5mm(forty into forty into five milimetre) and M.S flat 50x4mm ( Fifty into four milimetre) in combination as per drawing and design including hinges jamb, lock jamb, beed and if required angle threshold of mild steel angle 50x25 mm (Fifty into twenty five milimetre) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel but hinges 2.5 mm (Two decimal five milimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing angle iron door , windows, clerestory window frame (double rebate) manufactured from M.S. angle iron section of 40x40x5mm(forty into forty into five milimetre) and M.S flat 50x4mm ( Fifty into four milimetre) in combination as per drawing and design including hinges jamb, lock jamb, beed and if required angle threshold of mild steel angle 50x25 mm (Fifty into twenty five milimetre) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel but hinges 2.5 mm (Two decimal five milimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 12 mm (Twelve millimetre) thick prelaminated board both side bwp phenol bonded exterior/interior grade shutters withframe of 1st class deodar wood for cup board including nickel plated bright finished piano hinges 25mm (Twenty five millimetre) thick frame. including carriage of materials within all leads, lifts, and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing Prelaminated board Bwp phenol bonded exterior / interior grade both sides 12mm (Twelve millimetre) thick as directed by the Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 40mm (forty millimeter) thick second class deodar wood wire gauge shutters using galvanized M.S. wire gauge of IS gauge designation 85g (eighty five) gauge with wire of diameter 0.56mm (zero point five six millimeter) for doors, windows and clerestore windows including bright finished black enamelled iron hinges with necessary screws. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing angle iron cup-board (frame manufactured from M.S angle iron sections 25x25x25mm thickness including hinges jambs, lock guards, beed and if required angle threshold of mild steel 25x25x5mm welded or rigidly fixed by mechanically means luge split and tails to each jambs including steel butt hinges 2.5 mm thick with provision for looking arrangements and shock absorbers as specified and applying a cost of approved steel primer after pre-treat-ment of the surfaces. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections joints mitred and welded with 16x3.15mm(Sixteen into three decimal fifteen milimetres) lugs 10cm (Ten centimetres) long with steel plugs and screws or rawl plugs screws or with fixing clips or with bolts and nuts as required and iron fitting, including providing and fixing of glass pans with glazing clips and special metal sash putty of approved make complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Top hung Ventilators

Side hung window

Fixed steel windows

Providing and fixing M.S. sliding door bolt bright finished or black enamelled with nuts and screws etc. complete including carriage of materials within all leads, lifts, and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

300X16mm (Three hundred into Sixteen milimetre)size

250X16mm (Two hundred fifty into Sixteen milimetre)size

Providing and fixing 250x10mm (Two hundred fifty into ten milimetre)size M.S. tower bolts (barrel type) anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 125 mm (One hundred twenty five milimetre) aluminium handles oxidized transparent or dyed to required colour or shade with necessary screws etc. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing M.S. rectangular pipe stair railing over M.S. flat having baluster 20mmx20mm and 12mmx12mm ( Twenty milimetre into twenty milimetre and twelve milimetre into twelve milimetre) M.S. solid square bars in combination with M.S. flat 40x6mm (Forty into six milimetre) with a clear height of 85cm @ 60 C/C, jointing in cement concrete steps and jointing with electrical gas welding at top along wing hand rail of hollow M.S rectangular pipe of 75x25mm (Seventy five into twenty five milimetre) (SWG-16) Vertical M.S solid squiare bars, baluster welded/ jointed with each with 2 Nos. M.S flat of 40x6mm (Forty into six milimetre) complete with a priming coat of read paint as per specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

6mm (Six milimetre) thick cement plaster to ceiling with cement mortar 1:3 (One cement: Three sand) including carriage of materials within all leads, lifts and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

15 mm (Fifteen milimetre) thick cement plaster in single coat on rough side of brick/concretes/ stone walls for interior plastering up to floor two level including arises, internal angles, chamfers and /or rounded angles not exceeding 80mm in girth and finished even and smooth with cement mortar 1:6 (1 cement : 6 sand). The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

15 mm (Fifteen milimetre) thick cement plaster in single coat on fair side of brick/concretes/ stone walls for interior plastering up toall floor evel including arises, internal angles, chamfers and /or rounded angles not exceeding 80mm (Eighty milimetre) in girth and finished even and smooth with cement mortar 1:6 (1 cement : 6 sand). The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providng and Fixing 0.60 mm (zero decimal six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with preparinted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia metre with prepainted limp-et and rubber washers complete with all accesories as required. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing ridges or hips 60 cm (Sixty centimetre) overall 0.60mm (zero decimal six zero millimetre) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing valley 60 cm (Sixty centimetre) overall 0.60mm (zero decimal six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Steel work welded in built up sections trusses and frame work including cutting hoisting and fixing in position and applying a primer coat of red lead paint in beams joints, channels angles tees flats with connections plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 15cm. (Fifteen centimetre) wide 45cm.(Forty five centimetre) Overall semicircular plain G.I. Sheet 0.80mm (Zero decimal eight zero ) milimetre thick gutter with iron brackets 40x3mm (Forty into three milimetre)size, bolts nuts and washers etc. including making necessary conections with rain water pipe complete as per design including carriage of materials with in all leads , lifts and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providng and Fixing M.S. B.P Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cuttng, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (base members of steel work shall be measured & paid separately) including carriage of materials within all leads, lifts of materials and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing M.S. plain grills of required pattern in wooden frames of windows etc. with M.S. round headed bolts and nuts or by screws including carriage of materials within all leads and lifts of materials and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 10mm (ten millimetre) thick antiskid water proof stain and impact resistent heavy duty viterified tiles Kajaria/Nitco/AGL or equivalent 600x600x10mm (six hundred into six hundred into ten millimetre) manufactured of approved shade and colour in flooring treads of steps and landings laid over 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per specification in all floors including carriage of material within all leads, lifts and other incidental charges complete in all respect. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 10mm (ten millimetre) thick antiskid viterified tiles Kajaria/Nitco/AGL or equivalent 600x600x10mm (six hundred into six hundred into ten millimetre) manufactured of approved shade and colour in flooring treads of steps and landings laid over 10mm (ten millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per specification in all floors including carriage of material within all leads, lifts and other incidental. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing Ist class deodar wood12mm(Twelve milimetere) thick and 100mm (Hundred milimetere)wide pelmet with 25mm(Twenty five milimetere) diametere wooden curtain rod and brackets including fixing witgh 24x3mm(Twenty four into three milimetere) M.S flat 10cm. Long and plugs etc. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Painting two coats (excluding priming coats) on new steel and other metal surfaces with enamel paint brushing to give and even shade including cleaning the surfaces of all dirt dust and other foreign matter enamel paint other than white including carriage of materials within all leads and lifts and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

White washing with lime on undecorated wall surfaces (Two coats) to give an even shade including thoroughly brooming the surfaces to remove all dirt, dust mortar dirt and other foreign matter including carriage of materials within all leads, lifts and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease dirt and other foreign matter sand paparing and knotting ready mixed paint brushing wood primer pink including carriage of materials within all leads and lifts and other incidentals

Painting two coats (excluding priming costs) on new wood and wood based surfaces with enamel paint brushing to give an any shade including cleaning the surfaces of all dirt, dust and other foreign matters sand papering and stopping within all leads, lifts of materials and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials within all leads and lifts of materials and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (Two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Applying one coat of Acrylic Washable emulsion Spectrum quartz king or equivelant finish composed of acrylic polymere in emulsion inorganic/ special pigment sillceous aggregate anti fungicides anti-rusting & foaming in two coats i/c necessary putty to give smooth even surface , sand papering smooth complete.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Painting two coats (excluding priming coats) on new concrete masonry/ asbestos cement/plaster surfaces with ready mixed synthetic enamelpaint of approved brand white paint brushing to give an any shade including cleaning the surface of all dirt, dust and other foreign matters and sand papering and stopping within all leads lifts and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing on wall face rain water pipes & working pressure not less than 4.5 Kgs./Sqm. ( Four point five Kilograms/Sqm.) embedded in R.C.C. column including fitting with spun yarn and cement mortar 1:2(1 Cement: 2 Sand) 100mm dia. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling joints with approved adhesive complete including carriage of material within all leads, lifts and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

PVC plain bend 150 mm (One hundred fifty milimetre) dia.

PVC Shoes 150 mm (One hundred fifty milimetre) dia.

Providing and fixing 100mm (One hundred milimetre) dia metre M. S. holder bat clamps of approved design to C.I. or S.C.I. pipes embedded in and including cement concrete block 10cmx10cmx10cm (Ten centimeter into Ten centimeter into Ten centimeter) of 1:2:4 (One cement is to Two Sand is to Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size and cost of cutting holes and making good the wall etc. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Anubhav Sharma

Mahesh Sharma

SHIV KUMAR

KARNAIL SINGH GOVT CONTRACTOR