Dhanpur Vijaypur Water Supply Scheme

Amount

OVER HEAD TANK WORKS

Supply of all Materials , Labours ,T&P etc. , testing of bearing capacity, design & construction of RCC O.H.T of 250 Kiloliters and 18 m. Staging with 1.00m wide RCC staircase from G.L. to balcony and from balcony to Top Dome 1m x 1m RCC landing at suitable locations and railed with 3 rows of 20mm dia. G.I. (M) pipe on 65x65x5mm angle iron posts fixed with ladder, top to the floor inside of the tank. M.S. M.H. cover with loacking arrangement, lightning conductor as per electricity rules, water level indicator, supply and fixing of outlet, inlet, overflow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body, vertical pipe, ladder M.S M.H. cover , ventilator column etc. complete with approved water proofing ( apex)/ enamal paint, testing, filling water for testing purpose etc. including supply of vertical pipes and specials.

PUMP HOUSE WITH ATTENDANT ROOM

Supply of all Materials, Labours, T&P etc.and Construct a Pump House With Size (3.50 m x 4.50m) along with Attendant Room with size (3.00 m x 3.50m) , kitchen and W.C. as per Design and Drawings, all complete.

RISING MAIN

Providing of all materials, carting from site store to site of work, Lowering into trenches with true alignment, Laying & Jointing of full length S&S Centrifugally Cast (Spun) / Ductile Iron Pipes including supply of ''EPDM" rubber gaskets conforming to IS : 5382-1985 with testing of pipe line complete. DI K-9 pipe confirming to IS:8329/2000 : 100 mm dia

Providing push-on-joints to Centrifugally (spun) cast Iron pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket: 100mm dia

Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS: 9523-2000 Upto 600 mm dia

Excavation in Ordinary Soil (loams, clay, sand) for foundation including lift up to 1.5 m and lead up to 30 m filling, watering and ramming of Excavated the earth into the trenches or into the sides between foundation trenches or into the plinth and removal. (15 X 0.70 X 1.10)

BOUNDARY WALL AND GATE

Supply of all labour, materials, and T&P etc. and construct boundary wall at proposed water works site.

Supply of all labour, materials, and T&P etc and privide 3.6 m wide M.S. gate with pillars as per departmental type design, at proposed water works site.

Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.

Supplying and filling in plinth with Jamuna sand including watering, ramming, consolidating and dressing complete in proposed water works.

M/S Ashok kumar Jain