REPAIR REPLACMENT TO EXISTING UNSERVICEABLE WATER SUPPLY PIPE LINES, VALVE CHAMBER, SLUICE VALVE AND OTHER CONNECTED WORKS AT 3 BRD AF CHANDIGARH UNDER GE (AF) MC CHANDIGARH

Amount

Excavation in trenches in soft/loose soil not exc 1.5 m wide and not exc 1.5 m deep for laying of pipes etc and getting out including cutting of grass and bushes complete all as specified and directed.

Returning, filling in, including, spreading, levelling, watering and well remming in layers not exceeding 25cm thick complete all as specified and directed.

Removal of surplus soil to a distance not exc 50 m away and depositing where directed at a level not exc 1.5 above the starting point complete all as specified and directed.

Dismantling and taking out from trenches the existing CI/DI/GI pipe 150 mm dia with spigot and socketed ends and lead joint /flange joint/tyten joint including burning out joints and recovering lead etc including fittings such as bend , elbow and tee etc and setting aside for reuse after cleaning or issuen under schedule of credit.

All as per Srl item no. 4 here-in-before but pipe of size 100 mm dia

All as per Srl item no. 4 here-in-before but pipe of size 80 mm dia Note for item 4,5 and 6 :- Existing old unsv pipe line CI/DI shall be disconnected only after making alternate arrangment to continue water supply .

Supply and fix in trenches new Ductlile iron lines of size 150 mm spigot and socketed /flanged end conforming to IS-839-200 class K-9 in any length laid in excavated trenches complete all as specified and as directed. Make : TATA/JINDAL/Electrosteel

All as per Srl item no. 7 here-in-before but of size 100 mm bore

All as per Srl item no. 7 here-in-before but of size 80 mm bore

Supply and fix in replacement for run lead joints suitable for 150 mm bore DI pipe and fittings including jointing material such as lead, spun yarn etc complete all as specified and directed .

Supply and fix in replacement for run lead joints suitable for 100 mm bore DI pipe and fittings including jointing material such as lead, spun yarn etc complete all as specified and directed .

Supply and fix in replacement for run lead joints suitable for 80 mm bore DI pipe and fittings including jointing material such as lead, spun yarn etc complete all as specified and directed .

Supply and fix in replacement for rubber ring joint (tyten joint) for 150 mm dia pipe complete all as specified and directed .

Supply and fix in replacement for rubber ring joint (tyten joint) for 100mm dia pipe complete all as specified and directed .

Supply and fix in replacement for rubber ring joint (tyten joint) for 80 mm dia pipe complete all as specified and directed .

Cleaning of CI/DI pipe of size 80mm dia removed under item No. 6 above and laying, jointing and connecting with the water supply line under and above ground, complete all as specified and directed. Note:- Excavation and earth work shall be measured and paid seperately.

Cleaning of CI/DI pipe of size 100mm dia removed under item No. 5 above and laying, jounting and connecting with the water supply line under and above ground, complete all as specified and directed. Note:- Excavation and earth work shall be measured and paid seperately.

Cleaning of CI/DI pipe of size 150 mm dia removed under item No.4 above and laying, jounting and connecting with the water supply line under and above ground, complete all as specified and directed. Note:- Excavation and earth work shall be measured and paid seperately.

Taking up or down GI tubing and connections and setting aside for reuse after cleaning or issue in credit for the existing GI pipe 20 mm bore including all fittings such as bend , elbow and tee etc complete all as specified and directed.

All as per Srl item no. 19 here-in-before but of 25 mm bore

All as per Srl item no. 19 here-in-before but of 40 mm bore

All as per Srl item no. 19 here-in-before but of 50 mm bore

All as per Srl item no. 19 here-in-before but of 80 mm bore

All as per Srl item no. 19 here-in-before but of 100 mm bore

Cleaning of old serviceable GI tubing for re-fixing and connecting obtained from item 19 here-in-before in old or new position (wall, ceiling, floor or trenches) of size 20 mm bore , complete all as specified and directed. Note:- (i) Rate for cutting and threading of GI pipe is deemed to be included in quoted rates (ii) Rates for new GI fittings (socket, elbow, bend, union, nipples, reducers etc ) required for fixing of pipe is deemed to be included in quoted rates. (iii) Excavation and earth work shall be measured and paid separately.

All as per Srl item no. 25 here-in-before but of size 25 mm bore

All as per Srl item no. 25 here-in-before but of size 40 mm bore

All as per Srl item no. 25 here-in-before but of size 50 mm bore

All as per Srl item no. 25 here-in-before but of size 80 mm bore

All as per Srl item no. 25 here-in-before but of size 100 mm bore

Supply and fix in replacement steel water tubing galvanized iron medium grade 20 mm bore pipe laid in trenches including all fittings such as bends. Elbow, tees, short piece, connections, back nuts, diminishing pieces, caps plugs and unions etc for the complete all as specified and directed . Note:- Excavation and earth work shall be measured and paid seperately.

All as per Srl item no. 31 here-in-before but of size 25 mm bore

All as per Srl item no. 31 here-in-before but of size 40 mm bore

All as per Srl item no. 31 here-in-before but of size 50 mm bore

All as per Srl item no. 31 here-in-before but of size 80 mm bore

All as per Srl item no. 31 here-in-before but of size 100 mm bore

Supply and fix in replacement of cast iron sluice valve class PN-1.6 conforming to IS 14846-2000 with flanged ends 150 mm nominal bore ISI marked complete with gun metal or stainless steel spindle and cast iron hand wheel including rubber /fiber board gasket, nuts, bolts and washers etc including necessary excavation, returning and filling complete all as specified and directed .

All as per Srl item no. 31 here-in-before but sluice valve 100 mm nominal bore complete all as specified and directed.

All as per Srl item no. 31 here-in-before but sluice valve 80 mm nominal bore complete all as specified and directed.

Supply and fix in replacement of gun metal globe or gate valve (class-1) 20 mm dia with iron wheel head screwed both ends for iron pipes or unions conforming to IS-778 complete with jointing materials like rubber sheet, nuts and bolts for the following sizes including necessary excavation, returning filling and removal complete all as specified and directed.

All as per Srl item no. 40 here-in-before but of size 25 mm bore

All as per Srl item no. 40 here-in-before but of size 40 mm bore

All as per Srl item no. 40 here-in-before but of size 50 mm bore

All as per Srl item no. 40 here-in-before but of size 80 mm bore

All as per Srl item no. 40 here-in-before but of size 100 mm bore

M & L for MCCB, TPN, 400 Amp, 415 volt ,Adjustable type thermal magnetic release breaking capacity 36 KA as in repair complete all as specified and as directed by Engineer-in –charge. Make : Legrand/BCH/Havells

M & L for MCCB, TPN, 250 Amp 415 volt ,Adjustable type thermal magnetic release breaking capacity 25 KA as in repair complete all as specified and as directed by Engineer-in –charge. Make : Legrand/BCH/Havells

M & L for MCCB, TPN, 200 Amp 415 volt ,Adjustable type thermal magnetic release breaking capacity 25 KA as in repair complete all as specified and as directed by Engineer-in –charge. Make : Legrand/BCH/Havells

M & L for MCCB, TPN, 160 Amp 415 volt ,Adjustable type thermal magnetic release breaking capacity 25 KA as in repair complete all as specified and as directed by Engineer-in –charge. Make : Legrand/BCH/Havells

M & L for MCCB, TPN, 100 Amp 415 volt ,Adjustable type thermal magnetic release breaking capacity 16 KA as in repair complete all as specified and as directed by Engineer-in –charge. Note for item 46 to 50 : Make and frame size of the new MCCB should be as per the existing unsv MCCB so that new MCCB can be fixed and connected properly in the panel. Make : Legrand/BCH/Havells

Material and labor for Cutting cast iron pipes 150 mm bore in position for insertion of new tee , branches/ fixing of sluice valve etc. Note : CI/DI fittings/sluice valve shall be measured and paid separately.

Material and labor for Cutting cast iron pipes 100/80 mm bore in position for insertation of new tee , branches etc Note : CI/DI fittings shall be measured and paid separately.

Supply and fix in replacement Cast Iron Air release Valves 100mm nominal bore with single air Outlets, conforming to IS 14845-2000, duly ISI marked with nut, bolts, washers and rubber gasket fixing up in CI/DI on Water supply mains including necessary excavation, returning and filling complete all as specified and directed.

All as per Srl item no. 53 here-in-before but Air release Valve 80 mm nominal bore complete all as specified and directed.

Supply and fix in replacement heavy duty foot valve brass body 80mm nominal bore , conforming to IS 4036, duly ISI marked with nut, bolts, washers and rubber gasket and fixing up in CI/DI on water supply mains and underground sump complete all as specified and directed.

Supply and fix in replacement heavy duty foot valve brass body 100mm nominal bore , conforming to IS 4036, duly ISI marked with nut, bolts, washers and rubber gasket and fixing up in CI/DI on Water supply mains and underground sump complete all as specified and directed.

Supply and fix in replacement Cast Iron non return/reflex valve 150mm nominal bore with by pass arrangement duly ISI marked with nut, bolts, washers and fixing up in CI/DI on Water supply mains complete all as specified and directed.

Supply and fixing in replacement of cast iron/DI fitting for sockted/ flanged pipes up to 150 mm bore such as bends, tapers, tee pieces (single & double branch) any type and angle tapers any type (straight, bends, increasing, decreasing or double socket etc) Tee branch single branch, 'Y' junction, double branch cross collars caps and plugs up to 150 mm bore complete all as specified and directed.

M&L for Cutting Existing steel tubing of dia 80 to 100mm bore for alteration or additions (each cut measured) in any condition complete all as specified and directed.

M&L for Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 15mm bore including all fittings complete all as specified and directed.

M&L for Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 20mm bore including all fittings complete all as specified and directed.

M&L for Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 25mm bore including all fittings complete all as specified and directed.

Supply and fix in repairs straight plain brass ferrules (or connecting screw) of 25mm bore screwed both ends complete all as specified and directed.

Demolition of brick masonry work built in cement mortar including all quoins, arches, pillars, or in any position (after staging) etc. and removal outside the MoD land distance exceeding 2.5Km but n.exc 3Km, complete all as specified and directed

Material and labour, brick work with fly ash bricks straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6), complete all as specified and directed.

M & L for PCC 1:3:6 type C-0 (12.5 mm graded crushed stone aggregate ) as in coping of vlave pits including necessary form work complete all as specified and directed.

Supply and fixing in replacement MS sheet cover 3mm thick, duly painted with two coats of black bituminous paint over a coat of red oxide primer, complete all as specified and as directed.

Supply and fixing in replacement of mild steel angle iron of any size including duly painted with two coats of black bituminous paint over a coat of red oxide primer , complete all as specified and directed.

Material and labour for plain cement concrete (1:3:6) type C-2 using 40mm graded crushed stone aggregate, as in foundation filling and mass concrete, complete all as specified and directed.

M&L for construction of brick masonry valve pit 120cm X 120cm X 120cm internal dimensions having 230mm thick brick wall in cement mortar 1:6 and plastered with 15mm thick in cement mortar 1:6 all around including external surfaces of walls and internal walls with bottom of chamber pit duly cement based paint on all exposed surfaces of the above mentioned size including mild steel sheet cover 3 mm thick and angle iron frame of size 40 x 40 x 6 mm duly painted with 2 coats of synthetic enamel paint over a coat of red oxide primer and including provision of suitable hold fasts to hold the frame, locking arrangement and lifting handle (including Excavation/earth work) complete all as specified and as directed.

M&L for fabrication of column pipe 3 mrtre long made out of 100 mm dia medium grade GI pipe including cutting of pipes in 3 metre length, supply and welding MS flanges heavy duty 02 Nos in workshop drilling holes, cutting slots for cables and lowering of column pipes in bore wells including providing new rubber gaskets, bolts, nuts and washers etc. complete all as specified and as directed.

Taking out carefully submersible pump set complete with submersible cable and column pipe any size from any depth for replacement of unserviceable column pipe with gasket or submersible cable and lowering of the same into deep bore well alongwith cable and column pipe and connecting with delivery pipe and cable with starter panel and testing for smooth and trouble free running.

Making all necessary arrangements for lowering of submersible pump set after repair carefully after connecting and jointing the submersible cable, MS chain/SWR and column pipe after cleaning and testing the same all as specified and directed by Engineer-in-Charge Note : Safety of pump , motor and coloum pipes, tube well and, submerible cable while lowering of submersible pump in the tube well is the responsibility of the contractor , Any damage to pump motor, column pipe, submersible cable and bore well shall be recovered from the contractor as per prevailing market rates.

To attend water supply complaints under Technical area ,3 BRD of any nature pertaining to all sizes of GI pipe,DI Pipe,CI Pipe ,leakage of all types ,all types of pumps any capacity any type and any location and locating the fault and rectification of the fault and replacing the unserviceable minor parts as per site requirement incl making connection and testing after completion of job complete all as specified and as directed by Engr-In-Charge. Note: (i) The T&P items shall be provided by the Contractor at his own cost. (ii) Any major spare part required for rectification/replacement will be paid under respective items of BOQ.

Supply and fix rubber gasket suitable for pipe of size 100/150 mm complete all as specified and as directed

Supply and fix MS nuts and bolts long thread and washer for column pipe/CI pipe flanged type fittings complete all as specified and as directed

M&L for servicing of existing cooling tower of capacity 3500-3600 Ltr/Hr , replacement of complete fins, replacement of fiber sheet complete bottom part of cooling tower ,the fiber sheet will be fixed by screwing nut bolt of suitable size ,suitable size of strip welding with help of welding machine to extra support for fiber ,cleaning of complete inside and outside portion of the cooling tower with cleaning chemical properly ,spray painting with two coat of paint inside & outside after scraping old/pill paint , electrically disconnected of electric motor overhauling and servicing of cooling tower motor, stripping out and coupling ,bearing ,taking out armature, cleaning slots ,replacement of bearing /bushes of suitable size ,painting of motor ,reassembling the complete motor into position testing on full load and welding works for cooling tower for cutting & fixing of cooling tower works required at site is the responsibility of contractor, complete all as specified and directed.

M&L for boring holes under road/pavement/hard standing by trenchless technology using ultra sound technique and necessary machine for inserting CI/GI pipe upto 150m bore hole, complete all as specified and directed. Note:- CI/GI pipe shall be measured and paid separately.

Supply and fixing adjustable nozzle fountain lights with 1.5" centre hole , under water luminaire , heavy duty,colour water tight for 27 W GLS lamp having nickel plated brass housing with flange on top , corrosion resistant, two cable entries at bottom with double compression water tight brass glands. Clear glass cover with silicon rubber gasket on both sides. Mounted on a brass frame, pre wired with fiber glass sleeves terminal block including necessary connection etc. conforms to IP 67 protection class I complete all as specified and directed.

M&L Cleaning the fountain by removing all debris material, mud, silt, ulgi etc including dewatering cleaning the floor etc, scrapping the walls, roof from inside the fountain and cleaning the nozzle after opening and refix again make serviceable the fountain complete all as specified and as directed.

Supply in replacement grass cutter machine having no load speed 7500 RPM , output power 1000 W and start with push button & size of machine 1550 x 410 x 500 mm complete all as specified and directed.

S&F in repair power contractor 3 pole ML-4 conforming to cat part No SS-90910 of L&T or equivalent in ABB/ Havells with DC coil of AC3 rating 70 to 110 Amps suitable for motor including connection with new copper cable of suitable size and connection with new copper lugs and testing for smooth and trouble free running of starter on load, complete.

S&F power contactor 3 pole ML- 2 of L& T or equivalent in ABB/ Havells with DC coil of AC-3 rating 60 Amps suitable for motor including connection with suitable size copper cable and removing unserviceable cable and connection with new copper lugs, nut bolts including taking out old unserviceable contactor form existing LT panel of pump house, complete all as specified and directed.

All as per Item No 84 here-in-before but capacity 3 pole MNX 50 ( model as per site requirement) complete all as specified and directed.

All as per Item No 84 here-in-before but capacity 3 pole MNX 70 ( model as per site requirement) complete all as specified and directed.

All as per Item No 84 here-in-before but capacity 3 pole ML 1.5 ( model as per site requirement) complete all as specified and directed.

Supply and fix in repair of over load relay for motor starter of motor 62 HP cap ( model as per site requirement), complete all as specified and directed.

Supply and fix in repair of over load relay for motor starter of motor 45 HP cap ( model as per site requirement), complete all as specified and directed.

Supply and fix in repair of over load relay for motor starter of motor 15 HP cap ( model as per site requirement), complete all as specified and directed.

M & L for repairing the pump set panel boards of different capacities/location by supply and replacing Ammeter 0-50 Amp, CT type size 96 sq mm square complete all as specified and directed :-

Supply and fix Voltmeter 0 - 500 Volt, size 96 sq mm all as specified and directed .

Supply and fix Indicator lamps 230 Volt all as specified and directed .

Cutting of road/path /floor PQC of depth 250 mm to 450 mm depth for laying of pipe line of size upto 150 mm and making good the surface with the same specification after laying , jointing and testing of pipe line all as specified and directed by engineer in charge .Note -Ready Mix Tarcoal and PCC payment will be done extra as case to case basis .

Supply and fix Ready Mix Granular Solid Bitumin graded crushed gravels / aggregates used to fill and level pot-holes in bituminous / concrete surfaces available in 25 Kg Packet all as specified and directed

M&L for two coats of Quick Drying 1K Epoxy Primer by Removing existing paint of sheet metal enclosure of Starter panels/Installation boards of surface area upto 10 Sqm complete by following manners (i) loose rust, mill scale from the metal surface by chipping, scrapping or by using any suitable solvent. (ii) Sand the surface with emery paper 180 & wipe clean. (iii) Use wire brush / machine tool to smoothen the rust spikes & sharp edges from the rusted surface. These rust spikes & sharp edges are difficult to coat completely & hence same needs to be smoothened before painting. (iv) In case of welded joints, ensure sharp edges / pikes are smoothened with machine tool. These welded joints are highly susceptible to corrosion & hence for better protection, spot painting of these welded joints needs to be done with paint & allowed to dry before starting complete painting. (v) Clean the surface using solvent to remove greasy deposits, fine particles & dust. (vi) Ensure the surface is clean & dry before painting all as specified and directed by Engr-in-Charge.

M&L for two coats of undiluted (or) 5% diluted PU Enamel paint 10 in 1 by spraying with 6 - 8 h drying in between the coats for sheet metal enclosure of starter panels/Installation boards of surface area upto 10 Sqm with Danger notice Sticker 1100 V complete all as specified and directed by Engr-in-Charge.

Material and Labour for SS Aldrop complete Set 250 mm length made of Stainless Steel, suitable Size for Starter LT Electric panel door, Easy Installation, Corrosion Resistant with proper fixing with SS nut and bolts to close the LT panel double door complete all as specified and directed.

Material and Labour for door handle 120 mm-02 Nos complete Set made of UPVC , suitable Size for LT Electric panel door, Easy Installation, Corrosion Resistant with proper fixing with SS bolts and washers to close the LT panel double door complete all as specified and directed.

Material and labour for stainless steel sections, sheet as in pillar/post/sides/backings, Railings etc for signages information/cautionary signs or as in railing etc incl excavation & embedding in concrete 1:2:4 type B1 (45x45x60cm) and screwing etc cutting top to shape as directed, drilling holes, notching, welding etc of pole height 1.5 metre (dia 75mm and 3mm thick) and above frame 3x4 ft (hollow SS pipe of size 75x50mm and 3mm thick) incl reflective type fixed to stainless steel frame work incl writing/fixing letters or figures (Block, roman, italic, indian) of approximate size 100mm height and 20mm width with high intensity prismatic reflective type ASTM type IV sheet including all necessary screw and nut & bolts, moulding, drilling and welding for E/M installations located in 3 BRD AF Stn complete all as specified and directed.

M&L for replacement of caustic soda tank outer GI sheet with new high density polyethylene milky white colour sheet having thickness of 5mm which suitable for caustic soda tank complete all as specified and directed by Engr in charge.

Supply and fix in replacement of temparature indicator TC-513 complete all as directed at site.

Supply and fix in replacement RTD assembly 200 mm long complete all as directed at site.

Supply and fix in repair ball valve 50 mm dia for hot air application as per site requirement all as directed by EIC.

Supply and fix in repair hot air safety valve of size 20 mm dia for 150 PSI as per site requirement all as directed by EIC.

Supply and fix of PVC suction tube for chemical dozing system as per existing make and dimension and as directed complete all as specified and as directed

Supply and fix of injection check valve 3/8" .for Chemical dosing pump as per existing make and dimension complete all as specified and as directed

Supply and fix of discharge tubing 3/8" for chemical dosing pump as per existing make and dimension and as directed complete all as specified and as directed

Supply and fix suction line strainer 3/8" for chemical dosing pump as per existing make and dimension and as directed complete all as specified and as directed

Supply & replacement of monoblock dozing pump of capacity upto 1 HP which having three phase motor of 1440 RPM and Gear system which connect the pump and motor complete all as specified and as directed.

Supply & fix in repair agitator motor 250 Watt, copper wound, 900 RPM, Single phase 230 Volt with Shaft and impeller and all accessories suitable for mounting on FRP Tank lid or wall complete all as specified and directed.

Supply and fix in repairs of Gun metal gate valve,20 mm bore with open and close indicator and locking arrangements , ISI marked: 778,Class 1 with spindle and Cast iron wheel,Bronze Wedge,Bronze Body,Forged Brass Bonnet,Bronze Stuffing Box,PTFE Gland packing,forged brass gland,forged brss gland nut,forged brass stem,Stainless steel locking rod,Bronze indicator,brass sheet indicator plate ,both ends female screwed,suitable for GI pipe including fittings and fixtures, as required, complete all as specified and as directed.

All as per item ser No 114 here-in-before but of size 25 mm bore

All as per item ser No 114 here-in-before but of size 40 mm bore

All as per item ser No 114 here-in-before but of size 50 mm bore

M&L Cleaning the sewage well 6.60 metre dia, 6.00 metre deep inner and outer portion of well, man hole chamber, by removing all sewage material, mud, silt, ulgi etc including dewatering cleaning the floor etc, scrapping the walls, roof from inside the well and applying two coats of white wash internally after proper washing the well painting the MS/CI pipes guard pipes with two coats of synthetic enamel paint, black and grey paint & panel board internally and externally including removal of sewage material to a distance exceeding 4 KM not exceeding 5 KM all as specified and directed by engineer in charge .

M&L epoxy cementitious coating for positive side waterproofing of over head RCC OH tank of cap 100000 gallons interior tank walls in two compartments having 20 metre height staging,food grade certification by CFTRI Mysore (Govt. Lab) to store potable water, fit for storing portable water,Adhesion strength as per ASTM D 4541: 02 3 MPA,Mixing ratio by weight (Base:Hardener:Filler:Water::17:18:65:20).The Following steps procedure (i)Stir the individual Base and Hardener well before use (ii)Add Hardener into Base under continuous mixing (iii) In this mix, add Filler under continuous mixing slowly add water (20% by weight) into the above mix under continuous mixing, till you get a homogeneous brushable consistency (iv)Apply the 1st coat of the above mixture over substrate using a brush and allow it to dry for 4 hours (v)Apply the 2nd coat of mix perpendicular to 1st coat and allow it to dry for 4 hours (vi)Allow 7 days for complete drying of applied coating of epoxy .

All as per the item ser no 119 here-in-before but OH tank of cap 75000 Gallons.

All as per item No. 119 here-in-before but RCC overhead tank of capacity 25000 gallons single compartment complete all as specified and directed.

Painting externally RCC OH tank of cap 100000 gallons having 20 metre height staging including scaffolding with two coats of exterior emulsion acrylic paint,100 % plastic ,anti algae,anti fungal over the one coat of primer including scrapping down old paint out side cemented surface including two coats synthetic enamel paint over one coat of yellow zinc primer painting of metal exposed surface(i.e iron ladder, Rising main, delivery delivery main,overflow and wash out pipe line of tank etc) with two coats of synthetic enamel paint over a coat of yellow zinc as primer complete all as specified and as directed. Note :- Cost of necessary T&P/scafolding incl safety equipments required for painting outside surface of over head tank is deemed to be included in the quoted rates.

All as per item ser No 122 here-in-before but OH tank of cap 75000 Gallons.

All as per item No. 122 here-in-before but RCC overhead tank of capacity 25000 gallons single compartment complete all as specified and directed.

Note:- Amount of credit of Rs. 23225.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

LA ENTERPRISES (BID ID -3493889)

SANJEEV ENTERPRISES (BID ID -3498893)