Fire Safety System

Name of Work :- Supplying, Installation, Testing & Commissioning of Fire Fighting System

as per NBC-2016 Part-4 Volume-2 at Desar Mamlatdar office, Ta. Desar, Dist.Vadodara

BILL OF QUANTITIES

It. No. Description of Item Quantity Unit Rate in Total

1 (A) Supplying, installation, testing and commissioning of 1.00 Set 253887.17

Electric Driven Main Fire Pump suitable for automatic

operation and consisting of following, complete in all

respects, as required:

(B) Horizontal type, single Stage, centrifugal, End suction

pump of cast iron & bronze impeller with stainless steel shaft,

Gland Pack conforming to IS

(C) Suitable HP Squirrel cage induction motor, TEFC,

synchronous speed 2900 RPM, suitable for operation on

volts, 3 phase 50 Hz, AC supply with IP 55 protection for

enclosure, horizontal foot mounted type with Class-'F'

insulation, conforming to JS-325.

(D) M.S. fabricated Common base plate, coupling, coupling

guard, foundation bolts etc. as required.

(E) Suitable cement concrete foundation duly plastered with

anti vibration pads.

1620 LPM at 56 m Head

2 (A) Supplying, installation, testing and commissioning of 1.00 Set 456179.13

Diesel Engine Driven Fire Pump suitable for automatic

operation and consisting of following, complete in all

respects, as required: (Diesel Driven Pump)

(B) Horizontal type, Single stage, centrifugal pump of cast of

iron body and bronze impeller with stainless steel shaft,

mechanical seal conforming to IS

(C) Suitable HP, 1500/2300 RPM water cooled with radiator,

diesel engine conforming to relevant IS standard

complete with auto starting mechanism, 12 /24 volts electric

starting equipment, 125 Ltrs diesel tank, exhaust pipe

extended upto 10 m outside pump house duly insulated with

50 mm thick glass wool with 1.0 mm thick aluminium sheet

cladding, residential silencer, instruments and protection as

per standard specification, stop solenoid for auto stop in the

event of fault with audio indications, painted with post office

red colour etc. as required.

(D) M.S fabricated, common base plate, coupling, coupling

guard, foundation bolts etc. as required.

(E) Suitable cement concrete foundation duly plastered and

with anti vibration pads.

1620 LPM at 56 m head

It. No. Description of Item Quantity Unit Rate in Total

3 (A) Supplying, installation, testing and commissioning of 1.00 Set 73818.20

Electric Driven Pressurisation Pump suitable for automatic

operation and consisting of following, complete in all

respects, as required: (Jockey Pump)

(B) Horizontal type/Vertical Inline type, Single Stage/Multi

Stage, centrifugal End suction pump of cast iron body and

bronze impeller with stainless steel shaft, mechanical seal

conforming to IS:

(C) Suitable HP squirrel cage induction motor TEFC type

suitable for operation on 415 volts, 3 phase 50 Hz AC supply

with IP 55 class of protection for enclosure, horizontal foot

mounted type with Class-'F' insulation, conforming to IS:

(D) M.S. fabricated Common base plate, coupling, coupling

guard, foundation bolts etc. as required.

(E) Suitable cement concrete foundation duly plastered and

with anti vibration pads.

180 LPM at 56 m Head

4 Fabrication, Supply, Installation, testing & commissioning of 1.00 No. 146058.84

Electrical Control Panel of cubical construction, floor mounted type,

fabricated out of 2mm thick CRCA sheet, compartmentalised with

hinged lockable doors, dust and vermin proof, powder coated of

approved shade after 7 tank treatment process, cable alley, inter

connection with suitable size copper conductor cable/solid copper

strip, having switchgears and accessories, mountings and internal

wiring, earth terminals, numbering etc. complete in all respect,

suitable for main fire pump. pressurisation pump & diesel pump set

complete as per CPWD specification with following in coming and

Outgoings, suitable for operation on 415V, 3 phase, 50Hz AC

supply with enclosure protection class IP 42 as required: for all

suitable AMP fire pump and Disel Pump in one cubical construction

250A. 50kA 4 Pole MCCB, lcs=100% Icu rating Digital Voltmeter 0-

500 V with selector switch Digital Ammeter (0-250A) with selector

switch & CTs etc. LED type RYB phase indicating lamps, ON, OFF,

trip indicating lamps Set of AL Bus Bar 300A

(Note: All outgoing feeders for pumps should have digital Ammeter

with selector switches, and LED type ON, OFF, trip indicating

MAIN FIRE PUMP (Hydrant & Sprinkler)

125 A, 50kA TPN MCCB, lcs=l00% lcu, with fully automatic

Star/Delta starter suitable for 75 HP pump with overload protection,

current sensing type single phase preventor complete with all

accessories and internal wiring required for automatic operation,

selector switch for local/remote,auto / manual /OFF operation.

It. No. Description of Item Quantity Unit Rate in Total

Suitable TPN MCCB, lcs=l00% lcu, with fully automatic Star/Delta

starter suitable for 75 HP pump with overload protection, current

sensing type single phase preventor complete with all accessories

and internal wiring required for automatic operation, selector switch

for local/remote, auto/manual/OFF operation.

JOCKEY PUMP (Hydrant & Sprinkler)

63 A, 50kA TPN MCCB, lcs=100% lcu, with suitable HP fully

automatic Star/Delta starter with overload protection, current

sensing type single phase preventor complete with all accessories

and internal wiring required for automatic operation, selector switch

for local/remote, auto / manual / OFF operation.

DIESEL ENGINE CONTROL

Control for diesel engine comprising -Automatic/Manual selector

switch & 3 attempts starting device, timers and relays as required,

push buttons, start/stop in manual mode Indicating lamp for high/

Low Lub. Oil pressure, High Water Temp and Engine on indication

The required built in auto panel suitable for operating with all

electrical component & accessories with necessary parts. The

panel shall be operate for Two Main Electrical Pump, Two Jockey

Pump & One Diesel Pump for Hydrant System & Sprinkler

Automatic System with full requirements and accessories. All Pump

shall as per sufficient requirement for Auto Operation system built

in auto panel. All pump pannel push switch start & automatically all

pumps starts. No Hindrence occured for starting of panel for

starting of all auto pump as directed by Engineer in charge.

5 Supplying and installing following size of perforated Hot 30.00 Mtr. 680.90

Dipped Galvanised Iron cable tray (Galvanisation thickness

not less than 50 microns) with perforation not more than

17.5%, in convenient sections, joined with connectors,

suspended from the ceiling with two numbers GI Suspenders

i/c base of suitable size GI angle, GI bolts & nuts, fastner etc

as required.150 mm width X 50 mm depth X 1.6 mm

6 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 20.00 Mtr. 162.61

cable multistrand Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing trench / pipe of

following size of cables. (F) 3 core 25 Sq. mm - for

Electrical pumps cable

7 Supplying and making end termination with brass 10.00 No. 280.05

compression gland and aluminium lugs for following size of

PVC insulated and PVC sheathed / XLPE aluminium

conductor cable of 1.1 KV grade as required. Double

Compression gland for Main Pump 3 X 25 sq. mm (25mm)

8 (a) Supplying, installation, testing and commissioning of 1.00 Set 77444.30

electric driven terrace Booster pump conforming to IS 12469:

2019 suitable for automatic operation and consisting of

following, complete in all respects, as required: (Terrace

(b) Horizontal type,centrifugal pump of cast iron body &

bronze impeller with stainless steel shaft, mechanical seal as

(c)Suitable HP squirell cage induction motor TEFC type

suitable for operation on 415 volts, 3 phase, 50 Hz, AC

supply with IP55 class of protection for enclosure, horiziontal

foot mounted type with Class 'F' insulation, conforming to IS-

(d) M.S.fabricated common base plate, coupling, coupling

guard, foundation bolts etc.as required.

(e) Suitable cement concrete foundation duly plastered and

with anti vibration pads. 450 lpm at 35 m Head

It. No. Description of Item Quantity Unit Rate in Total

9 Fabrication, Supply, Installation, testing & commissioning of 1.00 No. 65650.00

Electrical Control Panel of cubical construction, floor/Wall

mounted type, fabricated out of 1.6 mm thick CRCA sheet,

hinged lockable doors, dust and vermin proof, powder coated

of approved shade,having switchgears and accessories,

mountings and internal wiring, earth terminals, numbering

etc. complete in all respect, suitable for Terrace Booster

pump complete as per specification with in coming and

Outgoings, suitable for operation on 415V, 3 phase, 50Hz AC

supply with enclosure protection class IP 42 as required in

one cubical construction panel

with fully automatic Star/Delta/ Dual starter suitable for10 HP

pump with overload protection, current sensing type single

phase preventor complete with all accessories and internal

wiring required for automatic operation, pressure switch for

local/remote,auto / manual /OFF operation.

10 Supplying and installing following size of perforated Hot 20.00 Mtr. 680.90

Dipped Galvanised Iron cable tray (Galvanisation thickness

not less than 50 microns) with perforation not more than

17.5%, in convenient sections, joined with connectors,

suspended from the ceiling with two numbers GI Suspenders

i/c base of suitable size GI angle, GI bolts & nuts, fastner etc

as required.150 mm width X 50 mm depth X 1.6 mm

11 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 20.00 Mtr. 107.06

cable multistrand Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing trench / pipe of

following size of cables.

(C) 3 core 6 Sq. mm -For Terrace Booster Pump

12 Supplying and erecting Flexible PVC insulated multi strand 450.00 Mtr. 31.31

multi core 1.1 kv grade ISI marked copper wires of following

size to be erected as directed.

(d) 1.50 Sq.mm 2 core round PVC sheathed

13 Supplying and making end termination with brass 20.00 No. 248.98

compression gland and aluminium lugs for following size of

PVC insulated and PVC sheathed / XLPE aluminium

conductor cable of 1.1 KV grade as required. Double

Compression gland for Booster Pump 2 or 3C X 6 sq. mm

14 Providing, laying, testing & commissioning of 'B' class 30.00 Mtr. 602.69

Medium duty G.l. pipe conforming to IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nuts, bolts,

gaskets etc. and fixing the pipe on the wall ceiling with

suitable clamp/support frame and painting with two or more

coats of synthetic enamel paint of required shade complete

as required 25 mm

15 Providing, laying, testing & commissioning of 'B' class 9.00 Mtr. 1283.20

Medium duty G.l. pipe conforming to IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nuts, bolts,

gaskets etc. and fixing the pipe on the wall ceiling with

suitable clamp/support frame and painting with two or more

coats of synthetic enamel paint of required shade complete

as required. 80 mm

16 Providing, laying, testing & commissioning of 'B' class 118.00 Mtr. 1631.10

Medium duty G.l. pipe conforming to IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nuts, bolts,

gaskets etc. and fixing the pipe on the wall ceiling with

suitable clamp/support frame and painting with two or more

coats of synthetic enamel paint of required shade complete

as required. 100 mm

It. No. Description of Item Quantity Unit Rate in Total

17 Providing, laying, testing & commissioning of 'B' class 90.00 Mtr. 2230.90

Medium duty G.l. pipe conforming to IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nuts, bolts,

gaskets etc. and fixing the pipe on the wall ceiling with

suitable clamp/support frame and painting with two or more

coats of synthetic enamel paint of required shade complete

as required. 150 mm

18 Providing laying, testing & commissioning of 'B' class 10.00 Mtr. 4325.40

Medium duty GI Pipe conforming to IS 1239/Class -II of IS:

3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts,

gaskets etc. in ground including welding & providing,

anticorrosive treatment with coaltar/asphalt tape as per IS

10221, etc. of following sizes complete as required. 150mm

19 Supplying, fixing, testing and commissioning of butterfly 1.00 Each 3486.82

valve of PN 1.6 rating with bronze/gunmetal/SS seat duly ISI

marked complete with nuts, bolts, washers, gaskets

conforming to IS: 13095 of following sizes as required:

20 Supplying, fixing, testing and commissioning of butterfly 1.00 Each 4581.51

valve of PN 1.6 rating with bronze/gunmetal/SS seat duly ISI

marked complete with nuts, bolts, washers, gaskets

conforming to IS: 13095 of following sizes as required:

21 Supplying, fixing, testing and commissioning of butterfly 16.00 Each 6162.16

valve of PN 1.6 rating with bronze/gunmetal/SS seat duly ISI

marked complete with nuts, bolts, washers, gaskets

conforming to IS: 13095 of following sizes as required:

22 Supplying, fixing, testing and commissioning of butterfly 6.00 Each 8251.97

valve of PN 1.6 rating with bronze/gunmetal/SS seat duly ISI

marked complete with nuts, bolts, washers, gaskets

conforming to IS: 13095 of following sizes as required:

23 Providing, installation, testing and commissioning of non- 2.00 Each 5302.57

return valve of following sizes confirming to IS:

complete with rubber gasket, GI bolts, nuts, washers etc.as

required: 50 mm dia

24 Providing, installation, testing and commissioning of non- 4.00 Each 10045.14

return valve of following sizes confirming to IS:

complete with rubber gasket, GI bolts, nuts, washers etc.as

required: 100 mm dia

25 Providing, installation, testing and commissioning of non- 2.00 Each 16003.53

return valve of following sizes confirming to IS:

complete with rubber gasket, GI bolts, nuts, washers etc.as

required: 150 mm dia

26 Providing, installation, testing and commissioning of stainless 1.00 Each 6160.96

steel Y-strainer fabricated out of 1.6 mm thick stainless steel,

Grade 304, sheet with 3 mm dia holes with stainless steel

flange. 100mm dia

27 Providing, installation, testing and commissioning of stainless 1.00 Each 9900.00

steel Y-strainer fabricated out of 1.6 mm thick stainless steel,

Grade 304, sheet with 3 mm dia holes with stainless steel

flange. 150mm dia

28 Supplying and fixing air vessel made of 250 mm dia, 8 mm 1.00 Each 16442.15

thick MS sheet, 1200 mm in height with air release valve on

top and flanged connection to riser, drain arrangement with

25 mm dia gun metal wheel valve with required accessories,

pressure gauge and painting with synthetic enamel paint of

approved shade as required.

29 Providing and Fixing 25 mm dia. Air valve of Raising Main 2.00 Each 970.72

Line. For Air Release including supply, installing, testing and

commissioning etc. complete as directed by Engineer in

It. No. Description of Item Quantity Unit Rate in Total

30 S. I. T. C. in position approved make Forged Brass Ball 11.00 Each 879.04

valves having Body, Ball & stem bonnet in forged brass.

Lever, washer & Nut in Carbon steel. Gland packing & body

seat ring in PTFE (Teflon) seal with female BSP threads.

Tested to a pressure not less than 20Kg/Sq.cm with all

accessories etc. Complete as per direction of the Engineer-in-

Charge.25mm Dia

31 Supplying installing testing & commissioning of 100 mm dia. 6.00 Each 1801.78

Pressure Gauge 1% Accuracy direct bottom 3/8" BSP

connection in brass socket & Range 0 to 16 Kg/Cm2 etc.

necessary as directed by Engineer in Charge.

32 Providing and Installation SS 304 male to male siphone tube 6.00 Each 1150.03

size 3/8 inch dia for pressure gauge.

33 Providing and Fixing pressure switch in M.S./GI Pipe line 4.00 Each 1414.86

including connection etc. as required.

34 Providing and Installation SS 304 male to male siphone tube 4.00 Each 1150.03

size 1/4 inch dia for pressure switch.

35 Structural steel work in single section, fixed with or without 200.00 Kg. 103.92

connecting plate, including cutting, hoisting, fixing in position

and applying a priming coat of approved steel primer all

36 Supply Installation Testing and commissioning of 50000.00 Litre 7.22

Zincalvalume sheet Modular tank having size required size

with gross volume of Tank is 53 KL and Effective Volume is

50 KL. Rates are including of supply and erection of required

Fittings & accessories like Internal & External Ladder, Level

indicators, Air Vent, Manhole, Food Grade Liner & roof

Railing as per manufacaturing standard with required

Nozzles for Supply and descharge of Fire water as per site

situation and as directed by EIC.

37 Supply, installation, testing and commissioning of Gun-Metal 1.00 Each 10605.00

Draw out connection for Fire Brigade connection consisting

of 63 mm dia instantaneous type male coupling with built-in

check valves and 100 mm dia. flanged outlet complete with

bolts, nuts and rubber insertions as required as per IS:904-

38 Supplying and fixing of fire brigade connection of cast iron 2.00 Each 6154.35

body with gun metal male instantaneous inlet couplings

complete with cap and chain as reqd. for suitable dia MS

pipe connection conforming to IS 904 as required: 2 Way FB

39 Supplying and fixing of fire brigade connection of cast iron 1.00 Each 12559.56

body with gun metal male instantaneous inlet couplings

complete with cap and chain as reqd. for suitable dia MS

pipe connection conforming to IS 904 as required: 4 Way FB

40 Supplying and fixing single headed internal hydrant valve 6.00 Each 5620.58

with instantaneous Gunmetal/Stainless Steel coupling of

mm dia with cast iron wheel ISI marked conforming to IS

5290 (Type -A) with blank Gunmetal/Stainless Steel cap and

chain as required: Single Headed Stainless Steel

41 Supplying & fixing 63 mm dia. Stainless Steel (Grade 304) 6.00 Each 2883.17

short branch pipe with 20 mm nominal internal diameter size

nozzle conforming , to IS:903 suitable for instantaneous

connection to interconnect hose pipe coupling as required:

(18.18.2) Stainless Steel (Grade 304)

42 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe 12.00 Each 3955.40

with 63 mm dia male and female couplings duly bound with

GI wire, rivets etc. conforming to IS 636 (type-A) as required:

(18.16.2) Stainless Steel (Grade 304)

It. No. Description of Item Quantity Unit Rate in Total

43 Supply Installing Testing & Commissioning of M. S. 18 guage 6.00 Each 4455.86

hose box to accommodate of 2-Nos 15-Mtrs. Length Hose

Box pipe & 1 No. of branch pipe with Nozzle, With necessary

fabrication support and joints and 3 mm glass shutter

including poweder coating etc. complete as directed by

engineer in charge.

44 Supplying and fixing first-aid Hose Reel with MS construction 6.00 Each 8000.05

spray painted in post . office red, conforming to IS

complete with the following as required. 25 mm nominal

internal dia water hose thermoplastic (Textile reinforced) type

-2 as per IS: 12585 25 mm nominal internal dia gun metal

globe valve & nozzle. Drum and brackets for fixing the

equipments on wall. Connections from riser with 25 mm dia

stop gun metal valve & M.S. Pipe and socket.

45 Supplying & fixing 6 Kg. Capacity ABC Dry Chemical powder 12.00 Each 2828.00

Stored Pressure type fire Extinguisher As per I.S-15683

having ISI marked Etc. complete as Directed by EIC

46 Supply & installation ISI marked (IS:15683) Fire Extinguisher, 12.00 Each 4545.00

Carbon-di-oxide type capacity 4.5 Kgs. flat base including

valve, discharge hose of not less than 10mm dia., 1M long

and complete in all respects including initial fill with CO2 gas

conforming to IS:307-1966 filled to a filling rate of not more

than 0.667 and wall suspension bracket. (LMR) etc

completed as directed EIC.

47 Providing and Fixing Remote Push Button Switch for Main 6.00 Each 2139.83

Fire Pump on All floors for operation of Fire Pump including

control wiring 3 core x 1.5 Sq.mm copper armoured with all

required fittings and accessories with all labour and materials

as directed by Engineer in charge.

48 Supplying, installation, testing & commissioning Conventional 1.00 Each 15068.14

sector panel suitable for following zones, complete with

visual indications for short circuit fault, open circuit fault, fire

condition and all other standard facilities as per IS:2189 with

mimic diagram for all area/zone covered, complete with all

connections,interconnections as required. 10 Zone

49 Supplying, installation, testing & commissioning of 90.00 Each 1036.13

Conventional type smoke detector with builtin LED and

mounting base complete with all connections etc. as

50 Supplying, installation, testing & commissioning of 6.00 Each 376.26

Conventional type manual call box of ABS type in

surface/recess with stainless steel chain & hammer

assembly complete with glass and push button etc. as

51 Supplying, installation, testing & commissioning of 6.00 Each 449.58

Conventional type fire alarm sounder, mounted in A.B.S. box

etc. complete as required.

52 Providing, Fixing & installation PVC 100x100mm junction box 90.00 Each 118.12

for smoke detector including fixing in ceiling with all labour &

materials as directed by engineer in charge.

53 Providing and erecting ISI mark Medium class RIGID PVC 400.00 Mtr. 32.32

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed

It. No. Description of Item Quantity Unit Rate in Total

54 Design, Supply & Installation of Safety Signage approved 26150.00 Sq.Cm. 1.21

make made of zinc sulphide based glow in the dark rigid

sheet with high luminous property enclosed in a transparent

weather proof U/V stabilized plastic pasted on 3mm thick

Foam sheet for making signage For All Floor etc. completed

as directed by engineer in charge.

55 Cutting hole by mechanical means of 25 to 150 mm dia (or 6.00 Each 414.10

more as per site situation) in slab / beam throuhout the

thickness including finishing the same with cement mortar

1:3 as directed by Engineer in charge.

56 Providing and erecting HOT deep Galvanised iron strip wire 3.00 Kg. 77.77

57 Providing & Making cage made from 1mm thick MS Plate 1.00 Each 2828.00

including opening shutter as per requirementas per size of

pump including all fitting i.e. hinges & handles etc. Cage shall

be fix properly with anchor bolt in such away that it have

provision to maintain the pump on requirement asdirected by

engineer incharge with all laboured and materials etc.

complete with two coats of oil painting inside and outside

surface of cage.

58 Getting Fire FSPA( Fire Safety plan Approval) & FSC ( Fire 1.00 Job 50500.00

Safety Certificate) with required Professional &

Administrative Charges for Fire Fighting System. All the

required documents pertaining to FSPA & FSC will be

prepared by contractor except fire drawing will be given by

the client/Architect.The required any Govt levies for

FSPA/FSC will be born by the Company/Client.

Rs. Twenty Eight Lakhs, Twenty Seven Thousand, Eight Hundred Fourty Seven and Ninety

I/We am/are willing to carry out the work @ ______________ % ______________

percent (should be written in figures and words) below / above, the estimated rates mentioned

above, amount of my/our tender works out as under :

Above all items of "Bill of Quantities" with Item Description, Unit, Qty, Rate & Amount have verified by me

and found order.

Deputy Executive Engineer Executive Engineer

District (R&B) Sub Dn. No.2 District (R & B) Division

Vadodara Vadodara