Deposited Work

Item Quantities Item of work Tendered Rate

No. estimated but Total amount

No. estimated but Total amount

Unit according to

In Figures In Word estiamted

Supplying and erecting Flexible PVC insulated multi strand multi core

1.1 kv grade ISI marked copper wires of following size to be erected Rupees FourtySix

as directed. e) 1.50 Sq.mm 3 Paise FourtySix Only

core round PVC sheathed

Providing and erecting Miniature circuit breaker single pole 6A

Rupees One Hundred

to 25A suitable to operate on 240 V A.C. system and having breaking

2 10 Ea 112.11 Twelve Paise Eleven

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III Only

Providing & erecting 240 V MCB double pole switch for lighting Load Rupees Two Hundred

3 2 Ea (B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in 278.76 SeventyEight Paise

existing box having following capacity (A) 32 Amp. Cat.III SeventySix Only

Providing & erecting 415V MCB Four Pole Switch for Lighting

Rupees Six Hundred

Load (B curve) having 10KA breaking capacity & confirms to IS

4 1 Ea 638.32 ThirtyEight Paise

:8828 in existing box having following capacity (b)40 Amp.

Cat.III ThirtyTwo Only

Rupees SeventySeven

Providing and erecting HOT deep Galvanised iron strip wire 8 to

5 10 Kg 77.77 Paise SeventySeven

Providing and erecting Pipe type earthing having 150 cms.long

Rupees Three Hundred

and 2.5 cms. dia. galvanised iron pipe with coupling and buch

6 10 Ea 368.65 SixtyEight Paise

buried in specially prepared earth pit complete with necessary 8 SWG

earth wire. SixtyFive Only

Rupees One Hundred

7 10 Ea For using salt and charcoal / coke as required for pipe type earthing. 171.70 SeventyOne Paise

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

Rupees One Hundred

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid

8 260 Mtr 117.16 Seventeen Paise

on wall with necessary clamps or in existing trench / pipe of following

size of cables (A) 4 core 4 Sq. mm Sixteen Only

Making trench(removal & re erction charges of paver block/stone

including) in soft soil of suitable width of 90 cm deep for laying cable Rupees FiftyFive Paise

9 230 Mtr or locating the fault all over the run and back filling the same and 55.55

making the surface as normal ground.

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

Rupees SixtyTwo

10 250 Mtr connecting accessories of same material at required depth in existing 62.62

Paise SixtyTwo Only

trench for laying of cable. below ground / road surface for enclosing

cable (A)50 mm outer dia

Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm Rupees Four Thousand

O.D 6 mtr. Long duly painted with two coats of aluminium paint Four Hundred Fourty

complete with metallic base- plate of 300 mm x 300 mm x 4mm thick Paise NinetySeven

for using as a compound light pole with approx. weight 47 Kg. Only

Providing 1:2:4 cement concrete foundation & 70 % PCC from

bottom including excavation for the pole of size 45 x 45 x 100 cm.

Deep in below ground level with plinth of 45 cm x 45 cm (or 45 cm Rupees Eight Hundred

dia x 45 cm) high upper ground level with necessary curing and Nine Paise One Only

finishing in approved manner.

( for 4 & 6 mtr pole)

Supplying & erecting approved make SMC press moulded

composite FRP . loop-in, loop-out approx. 2mm thick box complete

with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting Rupees Four Hundred

13 10 Ea mob & hinged doors as per requirement having locking 476.72 SeventySix Paise

arrangements with mounting clamp with nuts, bolts & washers suitable SeventyTwo Only

for erection on pole with cable clamps& earth bolt of following size of

box. (C)150mm x 125mm x 100mm [deep]

Supplying and erecting Street light pole bracket comprising main B

Class MS pipe of 4.2 cm/require outside dia. complete with suitable B

Class M.S. sleeve tubing of approx. 45cms.length and suitable for

76.5mm/80mm/require size of pole top having nuts and bolts for fixing Rupees Four Hundred

14 10 Ea the brackets and having spread of 0.5 mtr. Length with 110 deg.with 450.46 Fifty Paise FourtySix

vertical plane and suitable welded stiffener reducer and nipple with Only

check nut complete painted with one coat.of Red oxide / PU base

primer and two coats of Aluminium / PU paint. paint with following

nos of arms. [A] Single Arm bracket 0.5 Mtr

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80 certificates)

(A) Street Light (IP-65), Surge protection -4KV integral, Light must

have 440VAC line supply over voltage protection.(Phillips, Wipro,

Surya, Bediya, Pyrotech, Bajaj, Havells, Jaquare, Osram,

Greatwhite & Ensave make )( with Two year complete

replacement warranty & Bidder has to submit of letest testing

Certificte of NABL approve Laboratry /ERDA testing certificate

for quality of fitting if any charges for testing ceritificate will be

paid by bidder)

10 Ea (i) 48 watts Cat-lll (Additional 10KV Non integral) 3345.12

Hundred FourtyFive

Paise Twelve Only

Rupees One Lakh SixtyFive Thousand Two Hundred Fifteen Paise Eighty Only

Note The Credit of dismentalled materials for Rs. 00.00 shall be recovered from the First R.A. bill payable to the contrator and there after

:- the dismentalled materials shall be the property of the contractor.

I/We am/are willing to carry out the work at__________________% above/below (in figures)_____________________________________percent

Above / below (in words) the estimated rates mentioned above amount of my\our tender works out as under :-

Estimated amount put to Tender Rs. _________

Deduct________% below Rs. _________

Net Amount Rs. _________

Estimated amount put to Tender Rs. _________

Net Amount Rs. _________

A I/We hereby declare that I/we have visited the site and fully acquainted my self / our selves with the local situation regarding

material,labour and other factors pertaining to the work before submitting this tender.

B I/We hereby declare that I/we carefully studied the conditions of contract, detailed technical specifications and other tender

documents of this work and agree to execute the same accordingly.

C Any Excess in Tender Item/Extra Item if Needs to be Execute. Contractors has to carry out work on the instruction of Competant

Authority on Tender Submitted rate,No Excuse will be Accepted.Hence Contractor are Requested to quote the rate considering this

D Contractor are requested to quote the Tender by considering that payment will be made after availibility of grant.Contractor has to

start the work immediately after issue of Work Order and as per instruction of Engineer-in-Charge irrespective of availibility of grant.

This estimate has been prepared on the new SOR wich is exclusive of GST hence GST additional will be paid to the agency as per

E existing guidelines.

(Signature of the Contractor) Deputy Executive Engineer

Electrical R&B Sub Division

Note 1 Please strike out whichever is not applicable.

2 In the case of tendered amount being quoted incorrectly the quoted pered percentage Below/Above will be considered as final.