REPAIR TO ROOFING JOINERY FLOORING, PLUMBING WORK INCL SANITARY FITTINGS AND FIXTURES TO CERTAIN BLDGS AT AULI UNDER GE 871 EWS AT MIL STN JOSHIMATH

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness ( below or above ground level) etc complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.

Demolition of cement concrete (reinforced) in any position of any description etc complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors and aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M & L for light shade vitrified ceramic tiles 10 mm thick(square/rectangular ) polished, area of each tiles not exceeding 0.36 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick CM 1:6 laying floor finished complete all as specified and directed.

M & L Glazed ceramic tiles Coloured 350 x 250mm/450 x 350mm 8 to 10 mm thick in wall/dado etc set & jointed in neat cement slurry & pointed in white or coloured cement to match rendering over 10 mm thick in CM 1:6 on stone masonry surfaces or surfaces other than fair face of brick work/ concrete surfaces complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 (Using 40mm graded stone agg) 75 mm thick in sub base finished even & smooth complete all as specifed and directed.

M & L for Prepolished Chequered cement concrete tiles (25cm x 25cm/ 30cmx30 cm) x 25mm thick, with grey cement and no pigment set, jointed and pointed in neat cement slurry in floors including 20 mm thick screed bed or bedding of CM 1:6 complete all as specified and directed

M & L for 18 to 20 mm thick granite(of any type) work(table rubbed and polished) in steps, jambs, pillars, window-cills,cooking platform and like set in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L 40 mm thick PCC 1:2:4 type B-1 (Using 20mm graded stone agg) in flooring finished even & smooth with using extra cement complete all as specifed and directed.

M & L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in surface channel and drain complete all as specified.

M & L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) 75 mm thick as in plinth protection complete all as specified and directed.

M & L for precast cement concrete 1:3:6 type C1 using 20mm graded aggregate as in solid building blocks, exc. 10cm in width and setting in CM (1:4) complete all as specified and directed.

- All as per item No. 14 above but except block

M & L rendering 15 mm thick in CM 1:4 mixed with WPC on brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound as per manufacturer instructions.

Extra for forming fair finished drain and channel 30 cm inner grith in cement concrete using extra cement in forms mould mitred/stopped ends complete all as specified.

Providing precast cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in landing, cover slab (for manholes etc) chullah woods, chajjas, water trough mangers, shelves, and similar articles with plain faces complete all as specified.

M & L TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required including crancking bending spirally for hoping for col hooking ends and binding with and including mile steel wire non less than 0.9 mm dia securing with clips in quality complete all as specified.

M & L PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping including form work complete all as specified and directed.

S & F in repair for 75 mm dia PVC (SWR) pipes single socketed fixed in walls and floors or trenches etc. as in weep holes of retaining wall complete all as specified.

S & F in repair 110mm bore PVC (SWR) pipe single socketed any length with rubber ring joints laid in trenches including taking down complete all as specified and directed.

S & F in repair PVC (SWR) bends any radius 110mm bore pipe complete all as specified.

Description all as per Srl item No. 24 here in before but 75 mm

M & L for 75mm PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580mm x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding complete all as specified and directed.

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S & F for PVC (SWR) 'P' trap bore of 110 mm complete all as specified and directed.

S & F for PVC (SWR) 'S' trap bore of 110 mm complete all as specified and directed.

S & F in repair Vitreous china urinal, bowl type, flat back, size of 465mm x 355mm x 265mm (minimum), white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement, with grating and union for discharge pipe and PVC waste pipe, including making all connections to existing connections, fixed complete all as specified and as directed.

- Ditto- but half stall type complete all as specified and directed.

S & F in repair vitreous china wash hand basin (550 mmx400 mm) white flat back excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specified and as directed.

S & F 32 mm dia bore waste fittings brass chromium plated for glazed ware sink, basin etc with long screwed shank and fly nut , flange and bedded in red lead cement and other end fixed incl waste pipe of reqd length complete all as specified and as directed.

S & F 15 mm bore pillar tap cast copper alloy with capstan head, fancy type chromium plated screwed down high pressure with or without lettered 'Hot or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repair 15 mm bore pillar tap cast copper alloy with capstan head, fancy type chromium plated screwed down high pressure with or without lettered 'Hot or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repair Flush pipe of polythene of low or high density or PVC, 32 mm dia for low level cistern complete all as specified and directed.

S & F in repair for PVC Pipe (LDPE), 32 mm dia, polythelene, of pressure rating 6 kgf/sqcm fixed complete to wall, ceiling or in floor, for wash hand basin all as specified and as directed.

S & F in repair Flushing cistern low level, PVC 10 Ltr capacity syphonic action type valve, valve less with inlet ball valve,float and handle incl bracket complete all as specified and directed.

S & F in repair Stainless steel sink with drainage board made of 1.00 mm thick steel body of overall size 915mm x 460mm,bowl size 410mm x 330mm x 160mm, kitchen or laboratory with plugs, washers waste pipes, including bedding in cement mortar on to dwarf wall or including fixing on cast iron cantilever brackets and connecting union to pipe etc. and making connections to all existing connections with draining board complete all as specified and as directed.

S & F in repair PVC connection 15 mm dia and 450 mm long complete all as specified and as directed.

S & F in repair for 15 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 142 gms.) all as specified and as directed.

S & F in repair for 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 142 gms.) all as specified and as directed.

S & F in repair of 15 mm dia CP jet with CP flexible pipe 90 cm long incl necessary fittings complete all as specified

S & F in repair Health faucet complete all as specified and directed

S & F in repair soap dish acrylic type complete all as specified

S & F in repair CP grating of size 100 mm dia complete all as specified

S & F in repair CP grating of size 100 mm dia with waste hole complete all as specified

Supply and fix in repair for towel Rail, brass chromium plated. 20 mm dia D type, 600 mm long between flanges complete all as specified and as directed

S & F in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with mild steel chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S & F in repair for Gun metal gate valve,15mm bore, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and as directed.

All as per item no. 52 above but 20 mm bore complete all as specified and directed

Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and directed.

All as per item no. 54 above but 20 mm bore complete all as specified and directed.

S & F 15 mm bore GI tubing medium grade with all fitting fixed to wall and ceiling or laid in floor complete all as specified and directed

All as per item no. 56 above but 20 mm bore complete all as specified and directed.

Re-fixing 15 mm bore old steel tubing and connection in new or old position (wall, ceiling,floors etc) complete all as specified and directed

Dismantling of water tank and removing to store exc 250 litre but not exc 500 litres complete all as specified and directed

Dismantling of water tank and removing to store exc 500 litre but not exc 1000 litres complete all as specified and directed

S & F rotational moulded polyetylene water storage tanks ISI marked of 500 litre capacity (Cylindrical vertical with closed top) with HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed.

S & F rotational moulded polyetylene water storage tanks ISI marked of 1000 litre capacity (Cylindrical vertical with closed top) with HD polythene float (ball) 15mm and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule hoisted and fixed in position all as specified in SSR Part-I ,complete all as specified and as directed.

S & F in repair Brass chromium plated shower rose 125 mm size with or without swivel joints, any size, incl fixing to steel pipe or union complete all as specified and directed

S & F in repair CP telephonoic shower rose complete all as specified and directed

S & F in repair PVC over head tank cover for 500ltr capacity tank complete all as specified and directed.

S & F in repair for PVC (SWR) vent cowl of 75mm bore with complete all as specified and as directed.

Dismantling of 100 mm dia CI pipes pipe jointed in cement mortar and taking out of trenches if required complete all as specified and directed.

M & L 100 mm dia CI pipe (sand cast) soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

M & L for PCC 1:3:6 type C2 40mm crused stone aggregate Concrete bed to drain pipes 100mm dia including packing under,and haunching against the sides of pipes after they are laid and tested; complete all as specified and directed.

S & F in repairs 15mm dia stop valves/angle valve cast copper alloy, chromium plated, fancy type screwed down high pressure, with crutch or butterfly handle screwed with both ends for iron pipe or for union complete all as specified and directed.

S & F in repairs 15mm dia Bib taps, cast copper alloy, chromium plated fancy type, screwed down high pressure, with crutch or butterfly handle screwed with both ends for iron pipe or for brass ferrules and complete all as specified and directed.

S & F in repairs 15mm dia Bib taps, cast copper alloy, chromium plated, screwed down high pressure, with crutch or butterfly handle screwed with both ends for iron pipe or for brass ferrules and complete all as specified and directed.

S & F in repairs 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed (minimum weight 15mm-90gms)and complete all as specified and directed.

S & Fin repair brass CP mixer 15 mm bore for mixing hot and cold water screwed down for iron pipe or any type of pipe and fixed in position and making good disturbed portion complete all as specified and directed.

S & F in repair for PVC water closet seat cover, black or white, closed pattern, with flat bottom and cover and mild steel chromium plated or aluminised hinging device, all as specified and as directed

S & F in repair for Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-90gms) complete all as specified and as directed.

S & F in repair cast copper alloy chromium plated central hole basin mixer,fancy type with long spout quarter turn operated type with 02 Nos PVC connections of best quality etc complete all as specified and as directed.

Cleaning , removing all scales, dust, dirt with wire/jute brush from inside of RCC/PVC tanks of capacity exc. 250 litres and not exc. 500 litres and from mouth of connected pipes all as directed by the Engr-in-Carge

-Ditto- as per item No. 78 but exc 500 litre and not exc 1000 litre all as specified and directed.

S & F in repair for 110 mm bore PVC (SWR) junction single,(Single T) equal or unequal complete all as specified and as directed.

S & F in repair for toilet paper holder, Brass chromium plated, fixed to wall with chromium plated brass screws complete all as specified and as directed

S & F for brass chromium plated urinal spreader fancy type complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) exceeding 1.5 Sqm each but not exceeding 4 sqm complete all as specified and as directed.

-Ditto- bu not exc.1.5 Sqm each complete all as specified and directed.

M & L for IInd class hard- wood plain, solid, straight Chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together withglue pinned at joints complete all as specified

M & L 30 mm thick flush shutter solid core construction with particle board core and plywood face panels, commercial type on both side complete all as specified and directed.

S & F for Second class hardwood, glazed and skeleton shutters,35mm thick ,open rebated and prepared to receive, glass etc, with sash bar, divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass or gauze etc; sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) fitted to chowkats all as specified and as directed.

S & F for Solid PVC door frame of size 50 mm x 47 mm, made out or 5 mm, plain colour PVC sheet, reinforced with MS Square tube all as specified and directed.

S & F for Factory made solid panel PVC door shutter, 30 mm thick (Style) consisting of frame made out of M.S. tubes for top and bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' chanel on both sides having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on both sides and as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site all as per specification & drawing all as specified and as directed.

S & F for butt hinges medium weight cold rolled mild steel 75 mm complete all as specified.

All as per item no. 90 above but 100 mm complete all as specified.

S & F in repair butt hinges medium weight cold rolled mild steel of size 100 mm complete all as specified and directed.

S & F for Aluminium anodised barrel tower bolt, of extuded section and fixed of 150 mm long complete all as specified and directed.

S & F in repair Mild steel barrel tower bolt stove enameled black with bright bolt and fixed of 150 mm long complete all as specified and directed.

S & F for 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F in repair for 250 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F for extruded aluminium alloy handles fabricated type, anodised 150 mm long all as specified and directed

S & F in repair for extruded aluminium alloy handles fabricated type, anodised 150 mm long complete all as specified and directed

S & F in repair 300 mm ordinary mild steel rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

S & F in repair for peg set of six hooks of brass chromium plated complete all as specified and directed

S & F in repair for door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one all as specified and as directed.

S & F for floor door stopper of aluminium alloy body and tongue, anodised, of 150 mm with rubber shoe and fixed in floor all as specified and directed.

S & F in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty including taking down old one all as specified and as directed.

S & F in repair for floor door stopper of aluminium alloy body and tongue, anodised, of 150 mm with rubber shoe and fixed in floor all as specified and directed.

S & F in repair 20 mm Chromium plated pipes for curtain rod complete all as specified

S & F in repair chromium plated bracket and knobs fo curtain rod complete all as specified

S & F in 0.56mm nominal dia wire galvanised mild steel wire cloth and average width of aperature 1.18mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

S & F in repair for 0.56mm nominal dia wire galvanised mild steel wire cloth and average width of aperature 1.18mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed

S & F for 3mm thick sheet glass,ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

S & F Powder coated aluminium frame for door, window, ventillators, partition wall, shutters etc etc including style & rails with standard anodized aluminium section with one or more rebates, including aluminium snap beading complete all as specified and directed.

S & F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed

M & L for rubber beading for fixing glass panes in aluminium frame work complete all as specified and directed.

S & F for prelaminated particle board, 12 mm thick, exterior grade, both side with decorative choice lamination ,fixed with screws fixed to aluminium frame work etc complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge thickness including nainital and similar pattern completed all as specified and directed.

S & F for 0.63mm thick galvanised mild steel with grade of zinc coating 275 with two corrugation side lap fixed with L or J type or cranked hook bolts in roof wall etc complete all as specified and directed.

-ditto- all as per item No.117 but except sheet complete all as specified and directed.

S & F 0.63mm thick plain,galvanised mild steel corrugated sheeting in ridges,hips, valley gutters drips and straight flashings complete all as specified with grade of zinc coating 275 completed all as specified and directed

M & L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint over a coat of pink primer all as specified and as directed.

M & L for preparation of old painted wooden surfaces of any description exc 10cm width or girth and applying two coat of 1st quality synthetic enamel paint complete all as specified and as directed.

M & L for preparation of old painted steel surfaces of any description exc 10cm width or girth and applying two coat of 1st quality synthetic enamel paint complete all as specified and as directed.

M & L for preparation of new surfaces of wall of any description and applying three coat of white wash complete all as specified and as directed.

Dismantling of ceiling board (fibre, pulp, insulation etc) any thickness including cover fillets complete all as specified and directed.

M & L for everest designer false suspended false ceiling using GI exposed ceiling suspension system of grid size 600mmx600mm with main runner 38mmx24mm, cross tee 29mmx24mm & wall angle 24mmx24mm. Using 4mm thick (High pressuresteam cured) pre-painted self embossed reinforced designer cement board, conforming to IS 14862:2000, to be placed in a grid of G.I. system duly suspended with 4mm dia G.I./M.S. bar hanger fixed with steel dash fastner or iron purlins from the roof witrh adjustment clip providing position for light fixture etc all as specified and directed.

M/S ANSULBHUJWAN