Annual Rate Contract for Providing and Applying Hot Thermoplastic Road Marking Paint (Asian, Burger & As Per MORTH) with Glass Beads in SEZ & SZ-A & SZ-B Bridges within Surat Municipal Corporation Limit.

PROBABLE DATE OF OPENING TECHNICAL BID Dt.04/08/2026 10.00 hrs onwards (Probable)

TENTATIVE PRICE BID OPENING Dt.13/08/2026 10.00 hrs onwards (Probable)

ESTIMATED AMOUNT Rs. 69,35,339=30 (Excluding GST)

CLASS "D" & Above or Equivalent

TENDER TO BE SUBMITTED TO:

SURAT CHIEF ACCOUNTANT,

SHRI TAPIBHAWAN, SHRI TAPIPURA

SURAT MUNICIPAL CORPORATION

BRIDGE DEPARTMENT

Annual Rate Contract for Providing and Applying Hot Thermoplastic Road Marking Paint (Asian, Burger & As Per MORTH) with

Glass Beads in SEZ & SZ-A & SZ-B Bridges within Surat Municipal Corporation Limit.(Work No. 09)

Item Description Qty. Amount (Rs.) Remarks

No (Rs.) (unit)

1 Road Marking With Hot applied Thermoplastic compound paint with

reflectorising Glass Beads on Bituminous/A.C.C./C.C. road surface.

Providing and laying of hot applied thermoplastic compound 2.5 mm

thick including reflectorizing glass Beads and 250gms per Sq.mt.

area thickness of 2.5 mm is exclusive of Surface applied glass beads

as per IRC-35.The finished surface to be level/uniform and free from

streaks and holes or chipping of Thermoplastic Rate includes 11823.20 367.72 Sq.Mt.

brushing, brooming and cleaning and application of paint.

NOTE: THE THERMOPLASTIC PAINT SHALL BE OF ASIAN,

BERGER & As per Ministry Of Road Transport & Highways

(MORTH) guidelines.

(a) Center Line / Edge line

2 Cat Eye / Road Stud / RPM: Supplying of Molded Twin Shanks

Raised Pavement Markers made of polycarbonate and ABS moulded

body and reflective panels with micro prismatic lens capable of

providing total internal reflection of the light entering the lens face

and shall support a load of 13635 kgs. tested in accordance to ASTM

D 4280 Type H and complying to Specifications of Category A of

MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06.

The height, width and length shall not exceed 20 mm, 130 mm and

130 mm and with minimum reflective area of 13 Sqcm on each side 11903.00 217.40 Nos.

and the slope to the base shall be 35 +/- 5 degree. The strength of

detachment of the integrated cylindrical shanks, (of diameter not less

than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the

body is to be a minimum value of 500 Kgf. Fixing will be by drilling

holes on the road for the shanks to go inside, without nails and using

epoxy resin based adhesive as per manufacturers recommendation

and The color of the marker should be as per the IRC 35-2015 and as

directed by engineer in charge. (3M Brand Only)

Executive Engineer (Bridge Department)

Surat Municipal Corporation

Signature of Contractor