Loading…
Loading…
Tender Value
₹27 L
EMD Value
₹40,000
Closing Date
17 Jul 2026, 6:00 pm
Executive Engineer, RANDER DIVISION
Work of Providing FRP fencing around distribution Transformer at Various locations within Jurisdiction of Pal Sub Division under Rander Division. And if required work to be carried out in other Scheme and Other Sub Division under Rander Division
317780
RND-485 : DGVCLDRND/0521/06/2026 Approved Date: 24-06-2026
Open
Electrical - All
Surat
3 documents required · 3 mandatory
₹1,180
SURAT
₹40,000
17 Jul 2026
25 Jun 2026
18 Jul 2026
25 Jun 2026
17 Jul 2026
25 Jun 2026
Sr. Item Est. Est. Rate Unit Est. Amount in
No Qty. in Rs. Rs.
Providing and fixing of FRP fencing of
1500mm height at Distribution
Transformer Centers with necessary
excavation, concreting for grouting
vertical posts up to 450 mm in ground,
1 Hardware, accessories, fittings, lock, _____ 3000.00 RMT _________
etc. complete as shown in specifications
and drawing enclosed. The fencing shall
comprise of one gate 2000 mm wide
having two flaps and payment for the
same shall be measured on Rmt basis.
Inside fencing area to be levelled
properly first by compaction above road
level and then finished with 6” thick
1:2:4 cement concrete & cement plaster
2 supported with 6” brick wall on _____ 81.00 Sq.ft _________
surrounding.(Materials to be utilized
:Cement Bags, Bricks, Sand &
In Words : Twenty Seven Lakh Only
For & On Behalf of DGVCL
% above / below of estimate amount
Stamp/sign of Contractor
Executive Engineer (O&M)
Rander Division
1|Page Seal; and “Signature of bidder
I/We am/are willing to carry out the work at rate quoted by me in website
www.tenderprocure.com.
I/We hereby accept all the conditions and specifications of this tender document, and
I/We have read & clearly understood the terms, conditions, and Schedule-B &
Technical specifications put by DGVCL on web-site.
GST at applicable rate will be reimbursed in actual to the contractor only after
submission of sufficient proof of such payment made to the Govt. For claiming
refund of GST agency has to submit invoice in the format as prescribed by the Act.
GST at the applicable rate will be levied on the total Schedule – “B”. GST will be
subject CGST, SGST, UTGST, IGST act and rules, regulation and notifications issued
by Government / DGVCL from time to time. Contractor has to classify the supply /
service according to the GSN / SAC of CGST Act, 2017. DGVCL also reserve the right
of classification in case of any misclassification of goods / services. Contractor has
to provide invoice in standard format as per CGST act and GST invoicing rules. GST
will be reimbursed subject matching of transaction in GST return. In case of
mismatch, amount of GST will be retained from the subsequent invoice of the
contractor. For final bills, GST will be retained and reimbursed on matching the
same in GST return and after receipt of request from the contractor.
Labour welfare cess will be deducted from RA & Final bills considering new
construction work as per latest prevailing law.
Security Deposit shall be released on successful completion of One year from actual
date of completion or finalization of final bill whichever is later.
SIGNATURE OF CONTRACTOR with stamp
2|Page Seal; and “Signature of bidder
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1. Draft Letter tender RND-485.pdf
2.FRP fencing Price Bid.pdf
3.RND FRP drawing as per common spec.pdf
4.Danger Board Gujarati.pdf
Download all tender documents and submit your bid