Pdg. Street Lights on Rampur to Brahaman Majra (3.00 KM) (Road ID 177) and Rampur to Chandpura (3.00 KM) (Road ID 178) via Sarsehri in Distt. Ambala.

Amount

Blanking sheet . Supply and erection of blanking sheet in existing distribution board. HSR No. 31.16 (i)

(L) Miniature Circuit Breaker and Isolator. Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. Miniature circuit breakers of 9 KA breaking capacity. SP MCB of 9 KA breaking capacity 6 amp. to 32 amp. HSR No. 31.17a) (ii)

TP MCB of 9 KA breaking capacity 6 amp. to 32 amp. HSR No. 31.17(a) (ii)

TPN MCB of 9 KA breaking capacity 6 amp. to 32 amp. HSR No. 31.17(a) (ii)

(Q) Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . HSR No. 31.22 (i)

Extra for using salt and charcoal / coke for pipe earth electrode as required. HSR No. 31.22 (ii)

Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required . HSR No. 31.22(xi)

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required . HSR No. (xii)

Pdg. and fixing 25 mm x 5 mm GI strip on surface or in recess for connections etc. as required with all labour and material. HSR No. 31.22(xv)

Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required . HSR No. 31.22(xvi)

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections 16 Sq. mm 4 Core Cable . HSR No. 31.26 (xI) Ard.

25 Sq. mm 4 Core Cable . HSR No. 31.26 (xIi) Ard.

S/E of suitable compression type brass cable glands for underground Cable. 10 Sqmm to 16 Sqmm Cable 2 to 4 Core . HSR No. 31.28 (ii)

25 Sqmm to 50 Sqmm Cable 2 to 4 Core. HSR No. 31.28 (iii)

(v) Pedestal . S/E of Godrej Almirah typeM.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- M.S.pedestal of size 750 mm wide , 900 mm high , 300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 1050 mm x 600 mm x 250 mm below ground level. HSR No. 31.33 (ii)

Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. Size 1.5 sqmm (3 / 0.81mm). HSR No. 31.40 (i)

S/E of double door sheet steel enclosures distribution boards suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material requared complete the job in all respect upto the entire satisfaction of the Engineer-in Charge of the work. 4-way, TP & N (Horizontal) (8+12) HSR No. 31.41 (iv)

S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 Mtr. Below ground level including diging and refilling of earth including cost of suitable size socket cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to entire satisfaction of Engineer- incharge of the work. HDPE Pipe 63/50 outer dia / inner dia. HSR No. 31.67 (i)

Supply & errection of Hot Dip Galavnized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts and all accessories as supplied by manufacture including cost of foundation accessories etc. The foundation bolts as per manfacturer design should be hot dipped galvanized pole to complete with door locking arrangement.Terminal plate consisting of 2 nos. 100 A, 4 pole natural links including connection etc. with suitble connecting arrangement for 2 no. MCBs/ kit kat including cost of R.C.C 1:1. 5:3 for foundation size 0.7M x 0.7M x 1.8M with minimum of 8 nos 12 mm dia longitudinal MS reinforcement rods with rings of 8mm dia not more than 200mm C.C for fixing the pole with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of work. 7 Mtr. Long pole with top dia 70mm and bottom dia 130mm with base plate of size 220x220x12mm. HSR No. 31.68 (i)

Supply and erection of module case circuit breaker single pole/ 4 pole on wall /on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 100 amp HSR No. 31.69 v

Supply and erection of 40 mm diameter 1.5 mtr Long Singla GI bracket (B - Class) with GI collar0.50 mtr. long of suitable size to fit on octagonal pole with top dia 70 mm including necessary nut and bolt etc. required for fixing of bracket on top of 8 Mtr. long octagonal GI pole duly painted with aluminium paint as per detail drawing attached making necessary connection with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. Singla Bracket NS-1

S/E of 72 watts LED street light Warm White with all labour and material required to complete the job in all respect upto entire satisfaction of Engineer-in-charge of work. (Make: Bajaj/ Crompton/ Havells/ Wipro/ Surya / Philips. NS-2

S/E/T/C of MCCB Enclosure 4 Pole MCCB F-1 Frame make Indo Asian with complete in all respect including all material required to complete the job in all respect & up to the entire satisfaction of the Engineer in charge of the work . NS-3

S/E of 63 amp. 3 Pole/230V Astronomical automatic time switch of Indo Asian make Cat No. TL065ASO alongwith contractor of required capacity movement controlled by precisaty quartz osciliation operation on main supply of continue to run on built in rechageable nicket cadium cell for 150 hours in the evnt of power failure including cost of contractor complete in all respect upto the entire satisfaction of Engineer-in-charge of the work. NS-4

Som Nath Contractor

M/s JSB Enterprises