ENIT No. 02 S No. 01 Construction of Sump Cum Pump House (Sinking Well Type) at NallahPoru for WSS ShalporaTujjar

Amount

Supply, fabrication and fixing in position M.S edge cutter with M.S anchorage incld. welding and making provisions for fixing of reinforcement of well curbs as per approved drawings and technical specification and as per the instructions of Engineer incharge complete job

Sinking of well through all types of soil complete as per drawings and technical specification having inner dia 4.50Mtrs and outer dia 5.10 Mtr by way of making of plate form over well with loading/unloading of sand filled bags for required number of casting and engagement of skilled well sinker/Asstt. well sinker to a required depth as per the site condition and removal of the plate form as per the instruction of the Engineer's incharge complte job

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc not exceeding 1.5mtr in width and for shafts wells, cesspits and the like not exceeding 10 Sqm on plan, depth upto 1.5mtr. All kinds of soil

Extra for item No (1) for the additional lifts of 1.5mtr or part thereof.(a) Ist lift

Providing and laying of earth/sand filled E.C bags manually including cost of E.C bags, swing charges including laying in position as directed by Engineer in - charge complete job

Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like

Providing and laying stone soling hand packed on level.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1 : 4 : 8 (1 cement : 4 fine sand : 8 graded stone aggregate 40mm nominal size) crushed.

Centering and shuttering including strutting, propping etc, and removal of form work for:Walls (any thickness) including attached pilasters, buttresses, plinth and string courses

Centering and shuttering including strutting, propping etc, and removal of form work for: Suspended floors, roofs, landings, balconies and access plate form

Centering and shuttering including strutting, propping etc, and removal of form work for: Columns, pillars, piers, posts & struts

Extra for shuttering In circular work (20 % of respective centring and shuttering items): Suspended floors, roofs, landings, balconies and access plate form

Extra for shuttering In circular work (20 % of respective centring and shuttering items): Walls (any thickness) including attached pilasters, buttresses, plinth and string courses

Providing and laying in position specified grade of reinforced cement concrete excld. the cost of centring, shuttering, finishing and reinforcement. All work upto plinth level. 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone agg. 20mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc upto floor five level excluding cost of centering, shuttering finishing and reinforcement 1 : 1.5 : 3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Applying priming coat : With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Distempering with oil bound washable distemper of approved brand and manufacture

Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete (T.M.T bars)

Providing and fixing aluminium tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete 100 x 10mm

Providing and fixing aluminium tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete 100 x 10mm

Providing and fixing of sliding bolts of 150mm dia incld. all carraiges involved complete job

Structural steel work in single section fixed with connecting plate for truss work incld. cutting, hoisting, fixing in position and applying a priming coat of red oxide steel primer

Brick work with common burnt clay F.P.S (non-modualar) bricks of class designation 75 in foundation and plinth in : Cement mortar 1 : 4 mix (1 cement : 4 fine sand)

Extra for brick work in super structure above plinth level above plinth level upto floor V level. (by manual level)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Marshal natural (silver wood)

Providing and fixing 30mm thick wire gauze shutters using galvanized M.S wire gauze of average width for aperture 1.4mm in both direction with wire of dia 0.63mm for doors, windows and clerestory windows with hinges and necessary screws. ISI marked M.S pressed bright finished butt hinges with necessary screws of required size. silver wood

Providing and fixing 30mm thick wire gauze shutters using galvanized M.S wire gauze of average width for aperture 1.4mm in both direction with wire of dia 0.63mm for doors, windows and clerestory windows with hinges and necessary screws. ISI marked M.S pressed bright finished butt hinges with necessary screws of required size.

15mm cement plaster on the rough side of single or half brick wall of mix : 1 : 4 (1 cement : 4 fine sand)

Providing and fixing hand rail of approved size by welding etc to steel ladder railing, balcony railing and stair case railing and similar work including applying a priming coat of approved steel primer. M.S tube (medium) 40mm nominal bore

Supplying and fixing rolling shutters of approved make, made of required size M.S laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.50cm long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 part 1 and M.S top cover of required thickness for rolling shutters. 80x1.25mm M.S laths with 1.25mm thick top cover

Providing and fixing ball bearing for rolling shutters (80x1.25mm) M.S laths

Providing corrugated G.S sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63mm thick with zinc coating not less than 275gm/m2

Providing and fixing of 12mm thick ply wood for ceiling incld. support/batten of tie 40x40mm (pop) incld. all sorts complete job

Carriage of materials by Mechanical transport from source to actual site of work including loading, unloading and stacking of material: Cement and steel from Divisional store avg. lead 15 kms

Carriage of materials by Mechanical transport from source to actual site of work including loading, unloading and stacking of material: Sand from Johama for avg. lead 25 kms

Carriage of materials by Mechanical transport from source to actual site of work including loading, unloading and stacking of material: Stone agg. 20mm for avg. lead 35 kms

Carriage of materials by Mechanical transport from source to actual site of work including loading, unloading and stacking of material: Stone agg. 40mm for avg. lead 35 kms

Carriage of materials by Mechanical transport from source to actual site of work including loading, unloading and stacking of material: Soling for avg. lead 10 kms

M/S BABA SHUKUR U DIN SELF HELP GROUP

STAR TECH CONSTRUCTIONS