Loading…
Loading…
Tender Value
₹8.9 L
EMD Value
₹17,753
Closing Date
5 Oct 2026, 12:00 pm6d left
Executive Engineer,KID
Irrigation Waterways Directorate Office of the Executive Engineer Kakdwip Irrigation Division Postal address Kakdwip, South 24 Parganas
Maintenance of Office (Kakdwip Division Office Sub-Division Offices, Rest Shed) and different type of Quarters along with allied works (Upto December 2027) at Kakdwip Irrigation campus under Kakdwip Irrigation Division i.c.w Ganga Sagar Mela-2027
2026_IWD_5075916_10
WBIW/EE/KIDIVISION/e-NIT- 04 (e)/2026-27
Open Tender
CIVIL WORKS
Percentage
365 days
Kakdwip
Please refer Tender documents.
6 documents required · 6 mandatory
₹17,753
Yes
28 Sept 2026
28 Sept 2026
5 Oct 2026
28 Sept 2026
5 Oct 2026
28 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with
100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing
cistern, including flush pipe, with manually controlled device (handle lever)
conforming to IS : 7231, with all fittings and fixtures complete, including
cutting and making good the walls and floors wherever required:
17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440
mm with integral type foot rests | 7 | Each | 8,099.16 | ₹56,694.12 |
| 2 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar
taps, 32 mm C.P. brass waste of standard pattern, including painting of
fittings and brackets, cutting and making good the walls wherever require:
White Vitreous China Wash basin size 630x450 mm with a
single 15 mm C.P. brass pillar tap | 8 | Each | 2,664.47 | ₹21,315.76 |
| 3 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per
IS:13983 with C.I. brackets and stainless steel plug 40 mm, including
painting of fittings and brackets, cutting and making good the walls
wherever required :
17.10.2 Kitchen sink without drain board
17.10.2.1 610x510 mm bowl depth 200 mm | 9 | Each | 5,913.1 | ₹53,217.9 |
| 4 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan
complete :
17.20.1 White solid plastic seat with lid | 9 | Each | 819.62 | ₹7,376.58 |
| 5 | Providing and fixing 600x450 mm beveled edge mirror of superior glass
(of approved quality) complete with 6 mm thick hard board ground fixed to
wooden cleats with C.P. brass screws and washers complete. | 11 | Each | 1,924.38 | ₹21,168.18 |
| 6 | Providing and fixing soil, waste and vent pipes :
17.35.2 75 mm diameter :
17.35.2.1 Sand cast iron S&S pipe as per IS: 1729 | 42.2 | Mtr | 1,250.35 | ₹52,764.77 |
| 7 | Providing and fixing M.S. holder-bat clamps of approved design to Sand
Cast iron/cast iron (spun) pipe embedded in and including cement concrete
blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size), including cost of cutting holes and
making good the walls etc. :
17.37.2 For 75 mm dia pipe | 19 | Nos | 430.84 | ₹8,185.96 |
| 8 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps,
including making good the walls etc. concealed pipe, including painting with
anti corrosive bitumastic paint, cutting chases and making good the wall :
18.11.1 15 mm dia nominal bore | 90.63 | Mtr | 694.68 | ₹62,958.85 |
| 9 | Providing and fixing PTMT bib cock of approved quality and colour.
15 mm nominal bore, 86 mm long, weighing not less than
88 gms | 29 | Nos | 150.32 | ₹4,359.28 |
| 10 | Clearing grass and removal of the rubbish up to a distance of 50 m
outside the periphery of the area cleared. | 10,672.96 | Sqm | 10.71 | ₹1,14,307.4 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.48 MB
Tendernotice_2.pdf
PDF • 0.26 MB
BOQ_5167908.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .