KASHIPUR SEPTAGE I AND D SCHEME PHASE II ON TURN KEY BASIS AT KASHIPUR CITY ON TWO BID SYSTEM UNDER AMRUT PROGRAMME

Amount

Part A : Design Build etc. work for construction of 440KLD SPS

Survey, Design,Construction, Supply, Erection, Installation, Commissionig & Allied Works for 440 KLD Sewage Pumping Station includig all civil works such as Site Development & Infrastructure Works including site Cleaning / Grading / Levelling etc ,Connecting ten drains of Dhela Basti & bring them to the inlet of receiving chamber of SPS, Providing and laying DI K9 S&S Pipe from SPS to Laxmipur Minor canal including reinstatement of road etc. complete in all respect as specified in bid document.

Civil and Structural Works

Electro- Mechanical Works

Part B : I&D WORKS FOR RAILWAY LINE NALA

Survey, Design,Construction of 2 No. RCC Retaining walls & Allied Works for Railway line nala including Weir gates etc. complete in all respect to make the system functional.

Part C : CONSTRUCTION OF TYPE-I BUILDING AT EXISTING SPS AT MAHESHPURA

Construction of Type-I Residential Building ( PLINTH AREA 48.80 Sqm) as per CPWD Specifications

Part D : RENOVATION WORK OF EXISTING SPS AT MAHESHPURA

Electro- Mechanical Works

Civil and Structural Works (Renovation Works)

Demolishing cement concrete manually by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in-charge . Nominal concrete 1:3:6 or richer mix

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level .1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).

52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : 22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 13.61.1 Two or more coats on new work

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

CARRIAGE OF MATERIALS By Mechanical Transport upto 5km including loading, unloading and stacking- Sludge

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 ement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more( @1% of RCC Quantity)

Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 19.13.1 2.30 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : 19.13.1.1 With common burnt clay F.P.S. (non modular) Bricks of class designation 7.5

Excavation of earth upto 1.5 mt. depth below G.L. for laying of Sewer, Man-Holes, Gully Pits, Chambers, Sumps etc. in ordinary soil (earth, sand, loam and clay) including extra excavation below inverts trimming & dressing of sides, levelling and back filling of trenches by excavated earth in 20 cm layers,watering and ramming the same including removal of surplus earth or other dismantled material up to a distance of 50 meters from the center of trenches and cleaning of site properly after complition of the work. Excavation in ordinary soil.

Supply, carting to site of work of DI pipe K7 Pipe S&S pipe LA tyton joint lowering them into trenches and laying true to alignment and gradient including testing of pipe line but excluding cost of trench of sewer. 1.5- 3.00m BGL

700mm dia

Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered Depth exceeding 1.5 m but not exceeding 3 m

Sump Cleaning( removing of sludge from sump =(3.14*5.25*5.25*2.5)=216.36cum

Excavation work by machanical means (Hydraulic excavator)/ manual means in foundation trenches or drains not exceeding 1.5 m in width or 10sqm. On plan including dressing of sides ad ramming of bottoms lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. All kinds of soil

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Pebble dash plaster upto 10 m height above ground level with a mixture of washed pebble or crushed stone 6 mm to 12.5 mm nominal size, dashed over and including fresh plaster in two layers under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement.

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). For One Brick Thick Wall

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge: All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Part E : – SUPPLY OF DESLUDGING VEHICLE

Trailer Mounted Compact faecal sludge Suction Device, Tank Capacity 700L Captain Mini Tractor, 15 Hp Diesel Engine.

Trailer Mounted Compact faecal sludge Suction Device, Tank Capacity 1000L Captain Mini Tractor, 15 Hp Diesel Engine.