Construction of Upleta Town Sub Division Office Building with Electrification work after dismantling of old existing quarters at Upleta under Rajkot Rural Circle.

Name of Work: Construction of Upleta Town Sub Division Office Building with Electrification

work after dismantling of old existing quarters at Upleta under Rajkot Rural Circle

Sr No. PARTCULARS OF ITEM QTY RATE UNIT AMOUNT

1 Excavation for foundation up to 1.5 M. depth. Incl.

sorting out and stacking of useful materials and

disposing of the excavated stuff up to 50 meter. Lead in

- Loose soil or soft 315.00 127.51 Cmt

2 Excavation for foundation up to 1.5 M to 3.0M. depth.

Incl. sorting out and stacking of useful materials and

disposing of the excavated stuff up to 50 meter. Lead in

- Dense or Hard soil 120.00 177.05 Cmt

3 Excavation for foundation up to 1.5 M to 3.0M. depth.

Incl. sorting out and stacking of useful materials and

disposing of the excavated stuff up to 50 meter. Lead in

- Hard Murrum 37.00 297.91 Cmt

4 Uncoursed Rubble Masonry with hard stone of approved

quality in foundations and plinth for Rubble soling in

Cement Mortar 1:6 (1-cement : 6-coarse sand including

levelling up etc. complete 47.00 2573.35 Cmt

5 Filling available excavated earth (excluding rock)

trenches, plinth side of foundation etc. in layer not

exceeding in 20 cm. in depth consolidating each

deposited layer by ramming & watering. 142.00 136.11 Cmt

6 Filling in foundation and plinth with murrum or selected

soil brought from out side with any lead in layers of

cm. Thickness including watering, pnumatic ramming

and consolidating etc. complete. 697.00 296.70 Cmt

7 Filling in plinth with sand under floor including

watering, ramming, consolidating and dressing etc. 68.00 472.58 Cmt

8 Providing and Laying cement concrete 1:3:6(1 Cement 3-

Coarse sand: 6 - graded stone aggregate 20 mm. Nominal

size) and curing complete excluding the cost of

formwork in.- Foundations and plinth. 132.65 3035.06 Cmt

9 Providing and laying cement concrete 1:2:4 (1cement :

2coarse sand : 4 graded stone aggregate 20 mm. Nominal

size) and curing complete Excluding cost of form work

in (a) Foundation and plinth 80.00 3734.78 Cmt

10 Constructing 125 mm thick Controlled cement concrete

M- 200 Grade with Trimix Vacumm dewatering system

with power trowling sheet form work with M.S.

channels, srinking of fair hardness, Non oxidzing, Non

metalic, heavy duty floor hardner of FOSROC or

equivalent at the rate of 0.5 Kg./Sq.M. with 10 mm x

mm size groove cutting in concrete as constructution

joint with necessary equipments, labors as per design etc.

Complete. 324.00 708.00 Smt

11 Providing and laying cement concrete M-250 and curing

complete including cost of required form work but

excluding the cost of reinforcement for R.C.C. Work, In

:Foundation, footing, base of column and mass concrete.

12 Providing & laying controlled cement concrete M

and finishing smooth with curing etc complete including

the cost of form work but excluding the cost of

reinforcement for R.C.C. Work in Beam upto floor two

level of G.F. 56.00 6941.23 Cmt

Sr No. PARTCULARS OF ITEM QTY RATE UNIT AMOUNT

13 Providing & laying controlled concrete M 250 and

finishing smooth with curing etc complete including the

cost of form work but excluding the cost of

reinforcement for R.C.C. Work in Beams above floor

two level of F.F 11.00 6982.08 Cmt

14 Providing & laying controlled cement concrete M

and curing complete including the cost of form work and

excluding reinforcement for reinforced concrete work

for Columns,Pillars Posts and Struts up to floor two

level. G.F. 19.00 8958.34 Cmt

15 Providing & laying controlled cement concrete M

and curing complete including the cost of form work and

excluding reinforcement for reinforced concrete work

for Columns,Pillars Posts and Struts above floor two

level. F.F 7.00 8999.19 Cmt

16 Providing & laying controlled cement concrete M.250

with curing etc completed including the cost of form

work but excluding the cost of reinforcement for R.C.C.

Work in - Slab,staircase etc. up to floor two level for

all thickness.-G.F. 39.00 7334.53 Cmt

17 Providing & laying controlled concrete M-250 and

finishing smooth with curing etc complete including the

cost of form work but excluding the cost of

reinforcement for R.C.C Slab above floor two level F.F 14.00 7375.38 Cmt

18 Providing TMT Bars confirming FE 500/500D for

R.C.C. work including bending, binding and placing

in position complete for G.F. 18400.00 76.52 KG

19 Providing TMT Bars confirming FE 500/500D for

R.C.C. work including bending, binding and placing

in position complete for F.F. 3400.00 77.61 KG

20 Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:6 (1- Cement

: 6 -fine sand)(C) Fly Ash Bricks 111.00 5198.16 Cmt

21 Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm. in

Cement Mortar 1:6 (1- Cement : 6 -fine sand) in

superstructure Upto floor two level (C) Fly Ash Bricks

for GF 64.00 5490.38 Cmt

22 Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm. in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)

superstructure above floor two level (C) Fly Ash Bricks

for FF 45.00 5543.47 Cmt

23 Half brick masonry in common brunt clay building

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse

sand ) in Super Structure above Plinth level upto floor

two level (C)Fly Ash Bricks .-G.F 47.00 791.53 Smt

24 Providing 15 mm. Thick cement plaster in single coat on

both sides Brick/concrete walls for interior plastering up

to floor two level and finished even and smooth in

C.M.1:3. For GF 580.00 187.11 Smt

25 Providing 15 mm. Thick cement plaster in single coat on

both sides Brick/concrete walls for interior plastering

above floor two level and finished even and smooth in

Sr No. PARTCULARS OF ITEM QTY RATE UNIT AMOUNT

26 Providing 10 mm. Thick cement plaster in single coat on

fair side Brick/concrete plastering on ceilings for interior

plastering upto floor two level and finished even and

smooth in and sofits of stairs upto floor two level (I)

Cement mortar 1:3 (1 cement : 3 sand) -Celing for GF 290.00 167.54 Smt

27 Providing 10 mm. Thick cement plaster in single coat on

fair side Brick/concrete plastering on ceilings for interior

plastering above floor two level and finished even and

smooth in and sofits of stairs upto floor two level (I)

Cement mortar 1:3 (1 cement : 3 sand. Ceiling- for FF 101.00 217.27 Smt

28 20 mm. Thick sand faced cement plaster on walls up to

height 10 meters above ground level consisting of

mm. Thick backing coat of C.M. 1:3 (1 cement : 3 sand)

and 8 mm. Thick finishing coat of C.M.. 1:1 (1 cement :

1 sand) etc. complete. 753.00 327.45 Smt

29 Providing cement vata 10 x10 cm size quarter round in

cement concrete in C.M. 1:1 including neat cement

finishing watering etc. complete. 62.00 24.04 Rmt

30 Providing and laying broken chine mosaic flooring for

terrace using 12mm to 20mm broken piece of glazed tiles

to be laid over cement mortar 1:3 to plain or slop and to

be tempered to bring mortar crème out upto surface using

white cement including rounding off junctions and

extending them upto 15 Cm along the wall, ceiling with

water and oxalic acid etc. as directed. 304.00 771.98 Smt

31 Providing and laying 24''x24'' Vitrified 8 mm thick tiles

flooring & skirting over 20 mm (average) base of cement

mortar 1:6 (1 cement: 6 Corase sand) on new surface or

fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed

with colour cement slurry including finised with flush

pointing & cleaning the surface etc. complete for light

shade. 306.00 1531.53 Smt

32 Providing and Laying coloured digital glazed tiles of he

size 300mm x 200mm x 8mm / 300mm x 450mm x 8mm

in skirting, risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-sand) & jointed with

white cement slurry. 112.00 1543.66 Smt

33 Providign and laying marble stone in Riser, jamb, step,

sill or Dedo over 20mm (average base of cement mortar

1:6 (1-cemenrt :6 corase sand ) or L.M 1:1.5(1-lime

putty :1.5-corse sand) laid and jointed with gray cement

slurry including rubbing and polishing complete.(A)

Marble slab 25mm thick. 139.00 2445.35 Smt

34 Providing and laying Kotah stone slab 25 mm thick in

risers of steps, tread of steps, dedo and pillars laid on

MM thick Cement Mortar 1:3 ( 1-Cement : 3 -Coarse

sand ) and jointed with grey cement slurry including

necessary groove, rubbing and polishing etc complete as

directed by EIC.. 30.00 1186.77 Smt

35 Providing & laying 20 to 25mm thick, both faces

polished kotah stone with all edges machine cut up to

450/600mm width and of required length (only one piece

to be used ) of approved quality for cupboard shelves

including fixing the same in masonry wall by cement

mortar in three sides including curing etc. complete as

directed by E.I.C 76.00 956.00 Smt

Sr No. PARTCULARS OF ITEM QTY RATE UNIT AMOUNT

36 Providing , Fixing & Fitting fully glazed, partly glazed

Single/Double leaf anodized aluminum powder caoted(of

approved shade) Entrance door using extruded section

fabricated by standard manufacturers with framing

10.15x4.45cm rectangular section with & door shutter

made from 10.15x4.45cm aluminum bottom section, top

& vertical section 15 cmx4.45cm size using 5 mm thick

“TRIVENI” or HB4 plain/colour glass/4 Acrylic Sheets/

12 mm Board with glazing deep rubber gasket with

locking arrangement of GODREJ LOCK with all

fixtures & fastening of anodized section with aluminum

beeding without floor mounted door closer etc.

completed.. Rates are with all labours and material as

per drawing and as directed. 10.00 4080.00 Smt

37 Providing, & fixing hot pressed phenol bonded, exterior

type solid flush door 30mm shutter made by approved

brand & as per I.S.I. standard with water resisting

plywood facing and 1mm thick laminated sheet on both

side of door & teak wood leaping all-round including

fixing with marble by approved size and nos. of s.s.

hinges .If necessary with glass looking window with

T.W. batten and polishing /Colour. Rates are without

fixtures & fastening but with 3 NO. of 100mm. long butt

or parliamentary hinges on each flap of double shutter &

150mm. long hinges for single shutter and 3 NO. of M.S.

flat hold fast grouted in C.C. (1:2:4) on each side of

frame, 3 coats of oil painting of approved shades make

etc., complete as per drawing & as directed by E.I.C.

38 Providing and fixing FRP frame size 100x50 mm and

28mm thick FRP depress panel shutter having extra

reinforcement on sides & edges in Gel coat finish. The

core of the shutter & frame is to be filed up with injected

fire retardant grade polyurethene foam done in situ

alongwith embedded wooden pieces for stiffening & also

taking hinges & fintures. The whole FRP frame &

shutter is to be water proof weather proof, termite proof

& resistance to mild acid/alkali. Rates are to be inclusive

of S.S hinges with necessary screws &alluminium

fixtures & fastenings & fastener sleeve. 22.00 2354.22 Smt

39 Providing and fixing Window having extruded

Alluminium ivory or Colour anodized section frame

main outer size 63.50 x 38.10 x 1.95mm (of Jindal

Section No. 4605, @ Wt. 1.094 Kg./Rmt.), horizontal

two track member size 61.85mm x 31.75mm x 1.20mm

(of Jindal Section No. 8687 @ Wt. of 0.695 Kg./mt.),

vertical member of size 61.85mm x 31.75mm x 1.30mm

(of Jindal Section No. 8758 @ Wt. of 0.659 Kg./mt.)

with sliding shutters of horizontal member size 40mm x

18mm x 1.29mm (of Jindal Section No. 8949 @ Wt. of

0.456 Kg./mt.), vertical member of size 40mm x 18mm x

1.29mm (of Jindal Section No. 8947 @ Wt. of

Kg./mt. / Section 8948 @ Wt. 0.457 Kg./mt) with 5mm

thick transparent bronze colour tinted float glass with

powder coated alluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

detailes etc. complete for Window 35.00 1696.73 Smt

Sr No. PARTCULARS OF ITEM QTY RATE UNIT AMOUNT

40 Providing and fixing standared extruded of alluminium

section of size 63mm x 38.10mm x 1.2mm (Jindal

Section :2434, @ Wt. 0.643 kg per mt with colour

Powder Coated alluminium frame for ventilation with

mm thick frosted glass as details etc complete for

Ventilation 6.00 1163.92 Smt

41 Providing and fixing in position fully glazed / partly

glazed alluminium frame partition using alluminium

coloured powder coated rectangle section of standard

size 63 x 38 mm for vertical and horizontal, for top, all

intermediate, bottom & side ends panel. Panels is to

prepared from 5mm thick glass ( Modi or standard make

) and acylic sheet equivalent material with an overall

thickness of 3 mm, fixed with transparent rubber gasket

with alluminium beeding of required size. All galzing

should be designed with decorative film if necessary.

Scope includes all fixtures, fastenings and screws etc

complete as directed by EIC. Penalling is to be done as

directed by EIC. 12.00 3010.36 Smt

42 Providing and fixing rolling shutters of approved make

made of 80 mm wide M.S laths inter-locked together

through their entire length and jointed together at the

ends by end locks mounted on specially desinged pipe

shaft with bracket plates.guide channels and

arrangements for inside and outside locking with push-

pull operation including the cost of hood cover and

spring etc.complete.(A) Shutters haviong width below

43 Providing & fixing M.S. grills of required pattern to

wooden frames of windows etc. with M.S. flats at

required spacing and frame all-round square or round

bars with round headed bolts and nuts or by screws. (a)

Plain grill 1270.00 113.31 Kg

44 Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.-interior

wall surface 810.00 87.51 Smt

45 Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.-for ceiling

46 Applying two coats of Birla or Asian acrylic lapy (

putty) & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand

papered smooth. 1201.00 40.19 Smt

47 Finishing wall with weather proof exterior emulsion

(apex) paint on wall surface (two coats) to give an

required shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose powdered

materials.etc complete 753.00 120.93 Smt

Sr No. PARTCULARS OF ITEM QTY RATE UNIT AMOUNT

48 Applying One coat of exterior primer of approved brand

and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand

papered smooth. 753.00 28.00 Smt

49 Providing and fixing hydraulic door closer and of ISI

approved brand as directed. 6.00 925.00 No.

50 Providing erecting and fixing double coated (ISI) tank of

reqd. capacity each with all fittings & connections etc.

complete. 2000.00 3.91 Ltr

51 Providing laying and jointing in true line and level

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as per approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. 43.00 71.93 Rmt

52 Providing laying and jointing in true line and level

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as per approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. 43.00 90.93 Rmt

53 Providing laying and jointing in true line and level

32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as per approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. 30.00 117.97 Rmt

54 Providing laying and jointing in true line and level

50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as per approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. 70.00 193.73 Rmt

55 Providing & fixing to wall, ceilling, and floor in plumb

by means of GI clamps of 18 gauge sheet with 1 to

mtrs. Distance 6.00 Kg. /cm2 working pressure

polythene pipes of approved brand incl. joining with

approved solution & all fittings like bend, tee. Y bend

plug bend with water tight jointsIf pipe laid in

trenchesscope includes all type earth work up to 750 mm

depth .……-110mm Dia. 30.00 312.00 Rmt

56 Providing and fixing wash basin with single hole for

pillar tap with C.I. Or M.S. brackers painted white

including cutting holes and making good the same

including fittings pillar tap, stop cock, Rubber plug for

sink etc, (A) Vitreous china 550MM*400MM Size (I)

in white or colour 3.00 2184.92 No.

57 Providing and Fixing Gun Metal check non return wheel

valve -15mm.dia. Valve. 5.00 184.98 No.

Sr No. PARTCULARS OF ITEM QTY RATE UNIT AMOUNT

58 Providing and Fixing Gun Metal check non return wheel

valve-25mm.dia. Valve. 4.00 416.47 No.

59 Providing and Fixing Gun Metal check non return wheel

valve-32mm.dia. Valve. 4.00 311.61 No.

60 Providing and Fixing Gun Metal check non return wheel

valve-40mm.dia. Valve. 4.00 656.86 No.

61 Providing and fixing Urinal of approved quality

including connection with trap and with integral

longitudinal flush pipe including stop cock and other

accesories.(A) Squating plate pattern white

earthenware 550mm x 300mm. 4.00 1892.98 No.

62 Providing and fixing wash down closet (European W.C.

Pan) with integral "P" or "S" trap and PVC flushing tank

cistern with fittings and incl. plastic seat and cover with

brass hinges and rubber buffersand PVC connector

nozzle etc. including jointing the trap with soil pipe in

cement mortar 1:1 (1-Cement : 1-fine sand) (A)Vitreous

china pattern: (i) in white colour 4.00 3932.00 No.

63 Providing and fixing water closet squatting orrissa pan

(India type W.C. Pan) size 580 mm footrest and 100 mm

P or S trap and including 25 mm dia. C.P. brass flush

valve and G.I. inlet connection etc. comp. -vitreous china

long pattern white or colour as directed by EIC.(Bed

concrete and earth work will be measured and paid

seperately) 1.00 1792.00 No.

64 Providing & fixing Cast iron (spun /pvc) nahni trap of

the following nominal dia. of self cleaning design with

C.I/PVC screwed down or hinged grating and S.S. jali

including cost of cutting & making good the walls &

floor 100 mm inlet & 50 mm outlet. 7.00 660.09 No.

65 Providing & Fixing 150X100mm stone ware gully trap

with CI grating. B.B. Masonry in C.M.(1:6) chamber

including B.B.C.C.(1:4:8)150mm. thick bed concrete,

with water tight C.I. Cover with frame of 300 X300 mm

with plastering the chamber with curing etc., complete

as directed 4.00 1234.57 No.

66 Providing and fixing screw down quarter turn bib taps of

following size -Brass cromium plated screw down bib

tap -15 mm dia.. 10.00 184.98 No.

67 Providing & fixing C.P. brass scew down stopcock of

approved quality 15mm size 8.00 203.79 No.

68 Providing B.B. Masonry inspection chamber

(MANHOLE) of approved size including light type C.I.

Cover with frame, necessary excavation bottom

concreting of .C.C. (1:3:6) 150mm. thick/ 225mm. thick

Fly ash B.B. Masonry in C.M.(1:6) 15mm thick cement

plaster in C.M.(1:3) inside & to all exposed faces up to

300mm. below ground level, curing etc., including

disposal off surplus excavated earth up to radius of

mt. including 3 coats of white or colour wash to all

exposed finished surface etc. complete as directed by

E.I.C., (B.B.MASONRY UPTO 1000mm. DEPTH.)--

300X300 mm clear size 4.00 5653.00 No.

Sr No. PARTCULARS OF ITEM QTY RATE UNIT AMOUNT

69 Providing B.B. Masonry inspection chamber

(MANHOLE) of approved size including light type C.I.

Cover with frame, necessary excavation bottom

concreting of .C.C. (1:3:6) 150mm. thick/ 225mm. thick

Fly Ash B.B. Masonry in C.M.(1:6) 15mm thick cement

plaster in C.M.(1:3) inside & to all exposed faces up to

300mm. below ground level, curing etc., including

disposal off surplus excavated earth up to radius of

mt. including 3 coats of white or colour wash to all

exposed finished surface etc. complete as directed by

E.I.C.,(B.B.MASONRY UPTO 1000mm. DEPTH.)--

600x450mm clear size 5.00 6187.00 No.

70 Providing & fixing to wall, ceilling, and floor in plumb

by means of GI clamps of 18 gauge sheet with 1 to

mtrs. Distance 6.00 Kg. /cm2 working pressure

polythene pipes of approved brand incl. joining with

approved solution & all fittings like bend, tee. Y bend

plug bend with water tight jointsIf pipe laid in

trenchesscope -75mm Dia. 10.00 152.00 Rmt

71 Providing & fixing to wall, ceilling, and floor in plumb

by means of GI clamps of 18 gauge sheet with 1 to

mtrs. Distance 6.00 Kg. /cm2 working pressure

polythene pipes of approved brand incl. joining with

approved solution & all fittings like bend, tee. Y bend

plug bend with water tight jointsIf pipe laid in

trenchesscope - 90 mm Dia. 40.00 227.00 Rmt

72 Providing & fixing to wall, ceilling, and floor in plumb

by means of GI clamps of 18 gauge sheet with 1 to

mtrs. Distance 6.00 Kg. /cm2 working pressure

polythene pipes of approved brand incl. joining with

approved solution & all fittings like bend, tee. Y bend

plug bend with water tight jointsIf pipe laid in

trenchesscope -110 mm Dia. 15.00 274.00 Rmt

73 Providing & fixing to wall, ceilling, and floor in plumb

by means of GI clamps of 18 gauge sheet with 1 to

mtrs. Distance 6.00 Kg. /cm2 working pressure

polythene pipes of approved brand incl. joining with

approved solution & all fittings like bend, tee. Y bend

plug bend with water tight jointsIf pipe laid in

trenchesscope -160 mm Dia. 40.00 550.00 Rmt

74 Providing & Fixing light type C.I. Manhole covers with

water tight C.I. Frame & fixing the same in concrete etc.,

complete as directed by E.I.C. 600mm x 450mm size not

less than 35 kg.

75 Providing & Fixing 600X450X6mm. thick size approved

best quality of looking glass mirror Modi or gold fish,

mounted on 6mm thick ply with edging with PVC angle

patti as directed with fixture as required. 3.00 850.90 No.

76 Supply & fixing to doors & windows, ventilators, cup

boards following fixtures & fastenings of approved

quality with wooden or metal or brass screws, nuts &

bolts as directed or as per the drawing & specifications

etc., complete as directed by E.I.C. Flat latch (Brass)

77 As per above but Handle (Brass) 150 mm long. 28.00 69.32 No.

78 As per above but Door stopper 150 mm long (Brass). 14.00 90.00 No.

79 As per above but Tower Bolt 150 mm long (Brass) 14.00 90.00 No.

Sr No. PARTCULARS OF ITEM QTY RATE UNIT AMOUNT

80 As per above but MS best chromium plated aldrop

mm dia & 200 mm long. 14.00 380.00 No.

81 As per above but Aldrop 300 mm long &16 mm

Dia.(Brass) 14.00 377.00 No.

82 Providing 2500mm internal diameter & 3.0 Mt. Deep

soak pit including excavation in all types of soil & soft

rock & CC(1:3:6) bedding, 300 mm thick below

masonry and 450mm thick B.B Masonry in CM(1:6) up

to 600mm height, 350mm thick for further 600mm and

230mm thick for remaining height honey combed,

plastering in CM(1:3) outside up to 1.5 Mt height and

100mm thick M200 RCC slab with 600x600mm

C.I.HEAVY duty cover with frame, with necessary

reinforcement as per design & C.I Vent pipe 1800mm

long with B.B masonry pillar 350x350x450 plastered all

around filling with 40 to 50mm size brick bats up to

Mt depth, including 16mm dia M.S’U’ shape steps,

refilling including disposal of the surplus excavated earth

up to the lead of 500mt. Radius including 3 coats of

white or colour wash to all exposed finished surface etc.

complete as directed by E.I.C.. 1.00 47668.00 No.

83 Providing and fixing in position callapsible steel shutters

with vertical channels 20 x 10 x 2 mm braced with flat

iron diagonals 20 x 5 mm size with top and bottom rails

of T_rin 40x 40 x 6 mm with 38mm dia, steel pulleys

complete with bolts, nuts, locking arrangements, stoppers

handles including applying a priming coat of read lead

paint. 11.00 3980.00 Smt

84 P & F steel cupboard shutter of 20 gauge with steel

frame & fixing the frame with brick masonary including

locking arrangement with 1 coat of primer ( red oxide )

i.e asian, dulux or its equivalent and 3 coats of approved

oil paint i.e asian, dulux or its equivalent etc. complete as

per requirement and instruction of EIC. 26.00 3666.00 Smt

85 Providing and fixing brass towel rail complete with C.P.

Brass brackets fixed with C.P. Brass screws.-600 X20

mm size. 3.00 610.32 No.

86 Steel work welded in built up sections,framed work

including cutting, histing, fixing in position and applying

a priming coat of red lead paint & two coat of oil paint in

beam, purlin. Columns, rafter as per design and

instructions. 2043.00 95.18 kg

87 Providing and fixing pre-cast Rubber Dye interlocking

concrete block 60 mm thick with grade of concrete M200

pnumatic compressed by mechanically pressed and as

per approved design including 75 mm sand layer for

levelling and fitting the joints with sand in proper line

and level etc. complete. 938.00 603.00 Smt

88 Providing and fixing Stainless Steel railing having

mm dia, hollow stailess steel pipe hand rail and 40 mm

dia. Hollow stainless steel pipe with combination of

cm long 20 mm dia pipe as vertical support with 20 mm

dia hollow pipes 3 rows as intermidiate members running

throughout with steel bol as cap at each end including

cutting, bending, welding & fabrication the structure as

per drawing in 404 grade of steel etc. completed as per

instruction. 14.00 2730.00 Rmt

Sr No. PARTCULARS OF ITEM QTY RATE UNIT AMOUNT

89 P/F single layer waterproof gypsum board 8mm thick of

the make newgood group co.ltd or equivalent &

newgood group co ltd company section using waterproof

board of size 1220mm x 1830mm x 8.0mm suspended

by GI suapender of size 25mm x 3mm with intermediate

channel of size 18mm x 40mm x 0.80mm at 1220mm

C/C ceiling section of size 40mm x 35mm x 0.55mm at

457 mm center to center and perimetre chanel A of size

20mm x 27mm x 30mm x 0.50mm at edges & drops

including paper tap sand sofit cleat anchor fastener scoch

bolt connecting cleat joining compound top coat on

ceiling including making necessary opening for light

fitting,diffuser etc..compete as per detail drawing as

directed. 20.00 600.94 Smt

90 Providing Quarter round edge for Kotah/Marble in trade

of steps, sill, Jambs etc including rubbing and polishing

etc. Complete 315.00 39.10 Rmt

91 Drilling of bore well of 165mm.dia. by machine in all

kinds of soil, sand, clay, murrum, soft rock and hard

murrum, etc., complete, truly vertical with all equipments

and labours etc., complete as directed by E.I.C. up to any

depth. 200.00 264.00 Rmt

92 Providing, fixing & lowering heavy duty 10KG / CM2

P.V.C. casing pipe suitable for 165 mm dia bore well

including necessary coupling connector, solution etc.

complete as directed by E.I.C. 20.00 516.00 Rmt

93 Supplying and lowering approved ISI brand 5 H.P-3

Phase. submersible pump of approved brand with ISI

mark including lowering vertically, fitting with HDPE

pipe and top clamp and connecting cable with motor

MEI type starter as directed incl. all necessary

accessories and commissioning etc. completed. 1.00 26450.00 No.

94 Providing and fittings of standard switch board with

Ampere and Volt meter, fuse etc. Suitable for three phase

submersible pump of 1 HP/ 2HP/ 3HP/ 5HP with

metal/wooden covered box with locking arrangements

and fiiting on wall as directed. 1.00 4025.00 No.

95 Providing and fixing of cable Laxson or equivalent

brand 4mm three core copper ISI approved make incl.

Connecting with submersible motor and with approved

tap to HDPE pipe at 3.0mt interval etc. Completed :- for

Three phase 220.00 106.00 Rmt

96 Providing and fixing best quality of H.D.P.E. pipe of

approved ISS quality with all accessories fittings,

jointing etc., suitable for submercible pump lowering in

bore etc., complete as directed by E.I.C. 40 mm dia. &

10 Kg/ cm2 pipe 200.00 115.00 Rmt

97 Providing & Fixing top cap for 150mm.dia. pipe clamps,

socket & other accessories required for completing the

job as directed by E.I.C. 1.00 585.00 No.

98 Providing and fixing of wall cupboard shutter , having

18mm ply wood shutters using decorative laminate of

approved shade and quality on out side and white

laminate on inner side with wooden beading Patti with

colour ,if reqd. wooden frame of 2inchX1.5inch with

colour/polish with all cromium plated hardware material

and with locking arrengement and hinges etc. complete

incl. locking arrangement,,magnet etc. complete all

materials and labour as per direction of EIC. 44.00 3824.90 Smt

Sr No. PARTCULARS OF ITEM QTY RATE UNIT AMOUNT

99 Providing corrugated G.I. Sheets Class-3 roofing fixed

with Galvanied iron 'J' or 'L' hooks bolts and nuts 8 mm.

diameter with bitumen and G.I.Limpet washers filled

with white lead complete excluding the cost of purlins,

raffers and trusses. (I) 0.50 mm. Thick sheet 83.00 628.00 Smt

100 Providing & fixing sliding gate of 40mm. Dia Mild

Steel Pipe `B' class all round and 20mm. dia. Mild

Steel Pipe at 200mm. C/C and 12mm. Mild Steel

Square bars at 200mm.C/C alternatively (i.e. ONE

BETWEEN TWO PIPES)vertically welded to 40mm.

dia. pipe frame as per drawing and design with

necessary brackets, hold fasts, locking arrangement on

top & aldrop on both the sides including base rail for

sliding the gate having ball bearing rollers & guide track

of 50X6mm. M.S. Flat with hold fast, fabrication of

side supports including fixing `PGVCL. ‘letters on front

side etc., complete with three coats of approved oil

painting & one coat of red oxide primer as directed by

101 Providing and fixing Stainless Steel text i.e. "ઉપલેટા

શહર પેટા િવભાગીય કચેર ,પી વીસીએલ" in 15" text,

and "PGVCL" In 12" text in approved steel grade SS

304, including all fastners and fixtures &

scaffolding,labours etc. at give location as directed by

102 Demolition of Brick work and stone masonry including

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.(ii) In

103 Demolition including stacking of serviceable materilas

and disposal of unserviceable materials with all lead and

lift. (i) R.C.C. work 154.86 1122.66 Cmt

104 Dismentalings manglore of country tile roofing with

battens boarding etc. including stacking of serviceable

materilas and disposal of unserviceable materials with all

lead and lift. 864.60 92.86 Smt

105 Dismentling wood work, wrought framed and fixed in

frames trusses including stacking the materials with all

lead and lift. 9.93 1864.17 Cmt

Estimated Cost Section-I (CIVIL WORKS) in Rs.

106 Point wiring for light/fan/bell/primary point with 2-1.0

sqmm & earthwire of 1.0 sqmm (green) both are of ISI

marked FR PVC insulated multistand copper wire in

existing PVC pipe duly erected complete with 6 A

tissino type ISI marked flush type switch/bell push and

accesories erected on polished wooden block/Metal /

PVC box coveredd with 3 mm thick laminated sheet. As

per concealed wiring standards. Wire make:

Bentex/Polycab 273 412.00 No.

107 Point wiring for independent PLUG with 2-1.0 sqmm &

earthwire of 1.0 sqmm (green) both are of ISI marked FR

PVC insulated multistand copper wire in existing PVC

pipe duly erected complete with 6 A tissino type ISI

marked flush type switch/bel;l push and accesories

erected on polished wooden block/Metal / PVC box

coveredd with 3 mm thick laminated sheet. As per

concealed wiring standards. Wire make: Bentex/Polycab 50 380.00 No.

Sr No. PARTCULARS OF ITEM QTY RATE UNIT AMOUNT

108 Providing and erecting 1.5 mm thick FIA approved and

ISI mark (embossed) RIGID PVC PIPE of following

size, complete erected with necessary PVC fitting &

Junction boxes fixed with adhesive solution & clamps

with following type of size. SIZE = 20 mm Diameter 50 177.00 Rmt

109 Providing and erecting following shockproof tissino type

accessories erected on 3 mm thick laminated sheet in

wooden/PVC/Metal. Erected on wall / ceiling . One no

single pole 16 A switch & one no 6/16 A universal

socket combined. 20 125.00 No.

110 Providing and erecting following shockproof tissino type

accessories erected on 3 mm thick laminated sheet in

wooden/PVC/Metal. Erected on wall / ceiling . Backlite

lamp holder - universal socket combined. 30 125.00 No.

111 Providing and erecting switch board for computer,

electrical appratus consisting of following items. Single

board erected on wooden /PVC/ Metal board with 3 mm

thick laminated sheet erected as directed. 1 no 6A/16 A

universal plug swith combined with fuse & indicator.

no of 6 A tissino switch, 4 no 6 A tissino 5 pin plug.

112 Call bell/buzzer, 250 Volts, complete erected on existing

polished wooden block or 3 mm thick laminated sheet

113 Approved make CFL Lamp retrofit 13/15/18 Watt cat III

114 Providing Approved make trippele pole cast iron clad

switch & rewirable fuse with neutral link 415/500 V

confirming to I.S.S.(b) 32A Cat.III 15 960.00 No.

115 Miniature circuit breaker single pole 6A to 32A suitable

to operate on 240 V AC system and having overload and

short circuit tripping elements and breaking capacity

KA to be erected in existing M.S. Box confirming to IS

8828/1996 with ISI mark (A) 6 to 32 Amp Cat III, Make:

116 Providing & erecting 240 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing

box having following capacity (A) 6 to 32 Amp. Cat III,

Make : L&T 3 478.00 No.

117 Providing & erecting 415 V MCB four pole switch for

lighting load (B curve) having 10KA breaking capacity

& confirms to IS : 8828 in existing box having following

capacity (A) 6 to 32 Amp. Cat. III, Make: L&T 3 650.00 No.

118 Providing and erecting double pole MCB isolator AC

duty confirms to IS 13947-3 240 V 40 A in existing

metal clad MCB distribution board. (A) 6 to 32 Amp.

Cat III, Make: L&T 10 450.00 No.

119 Approved make ELCBs / RCCBs confirming to IS

:12640 and having sensitivity of 30 mA and Short circuit

withstand capacity of 6 KA and suitable for operation on

single phase 240 V having charectorstic of quick action

& tripping with all advance feature & not incorporate

any electronic component for following Max. rating.

Make: L&T 1 2125.00 No.

Sr No. PARTCULARS OF ITEM QTY RATE UNIT AMOUNT

120 Supplying of power saving ceiling fan, 50 watt with

condensor 230 Volt, 50 cycle, 1200 MM sweep complete

having 3 blades with canopy & 30 cm down rod erected

with 24/0.2 falt 3 core flexible wire with earthing with

resistance regulator. Make: Crompton greaves

121 supplying and providing fan hook box of 10 mm round

bar bounded to the RCC bars up to 50 mm length each

side and pierced through a 16 guage MS Box/ Heavy

duty PVC box having depth of 75 mm complete

concealed in ceiling with necessary finishing. 20 110.00 No.

122 Providing 2.5 mm thick laminated sheet to cover the fan

hook or fan box 15 50.00 No.

123 Earthing Electrode with ISO Quality certification, dule

pipe with flat technology consist of 3 Mtr long, 76-80

mm Outer dia. Pipe, 3mm thick and 37-40 mm inner dia.

pipe -2mm thick having terminal flat of 12mm.The entire

construction processed with hot dip galvanization, outer

surface up to 100 micron and all inner surfaces 200 to

300 micron. All inner annular space filled with highly

conductive and corrosive nature crystalline material

along with backfilling compound of 2 X 25 kg bags to

fill surround the electrode at the time of installation.

Earthing backfilling compound must have properties of

moisture retention, conducting and non corrosive nature.

Necessary boring and digging at site is to be carried out

by the agency. 2 20000.00 No.

124 Provind and erecting of TFT tube light, 20 watt, Make:

Philips with all acessories 100 475.00 No.

125 Provind and erecting of LED lights in DE's chamber,

Make: Philips with all acessories 6 180.00 No.

126 Providing and ercting of CAT-6 cable for LAN for each

computer as directed by Deputy Engineer with all

accessories by push pull method. Make of cable: D-Link 250 50.00 Rmt

127 Providing & fixing of LED fixture, 50 watt, for office

lighting as directed by Deputy Engineer Make: Philips 6 5500.00 No.

128 Providing and erecting of Exhaust fan, 12 MM , Make :

Compton graves Ltd 4 1450.00 No.

129 Providing and erecting of Ditribution box (fuse box)

with MCCB-ELCB for distributing power. Make: L&T 1 2256.00 No.

130 Provindg of Eathernet switch 24 port, Make - D Link for

Lan wiring 2 4000.00 No.

131 Providing and ercting of CAT-6 cable for LAN for each

CCTV camerra as directed by Deputy Engineer with all

accessories by push pull method. Make of cable: D-Link 180 45.00 Rmt

Estimated Cost Sectoin-II (ELECTRICAL WORKS) in Rs.

Sr No. PARTCULARS OF ITEM QTY RATE UNIT AMOUNT

Total Estimated Cost Section [ I +II ] in Rs …

132 Amount from Sale of IMLO by Dismentalling existing

Old Quarters in division. Party has to lift all dismentale

serviable and un-serviceable material from site and

making site clear in all respect. All lead and lift is in

scope of party. Rates includes all risk of accident. No

any property/live stock /human being of private as well

as of PGVCL shoud be damaged during execution of

work. All responsibility should be of contractor. The

IMLO amount as per finalized rate will be deducted from

bill of party. Rate quoted for this item will be effected in

reverse trend. (Note: Imlo quantity is considered

according to itemwise measurement shown in Part-A,

after execution of work, the actual quantity will be

measured; the effect of the same will be given in Part-B

and final payment will be made as per actual quantity.)

TOTAL AMOUNT TO BE CREDITED TO PGVCL in Rs …

TOTAL AMOUNT TO BE CREDITED TO PGVCL in Rs …

Estimated cost of work for Civil Work & Electrical Work

Bidder's Offer (B)

Bidder's Quoated Amt. (C ) i.e. [C= (A) +/- (A)*(B)]

GST @ [CGST @ __% + SGST @ __%] (D = C*__%)

Bidder's Total Quoated Amt. with GST (E) (E = C+D)

Rebate charges to be paid to PGVCL Sale of IMLO by Dismentalling existing Quarter

Bidder's Offer (G)

Bidder's Quoated Amt. [ H = (F) +/- (F)*(G)]

GST @ [CGST @ __% + SGST @ __%] (I) (I=H*__%)

Bidder's Quoated Amt. with GST (J) (J = H + I)

Bidder's Total Quoated Amt. with GST & TCS for Demolition work (L = J + K)

Bidder's Net Quoated Amt. (M) i.e. (M = E - L)

(Note : Prices will be evaluated i.e. L-1, on Bidder's Net Quoated Lowest Amt. i.e. on "M" Amt.).

Chief Engineer(Material)

PGVCL, Corporate Office