Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.1 CrAdmitted-Finance | ₹3.1 Cr | L1 | Admitted-Finance |
| 2 | Not Admitted-PreQual/Technical 233 PLATINUM PLAZA OPP IOCL PUMP NR JUDGES BUNGLOW CROSS ROAD BODAKDEV AHMEDABAD GUJARAT 380054 | AHMADABAD | GUJARAT | 380054 | - | - | Not Admitted-PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | Shanti Enterprises L1 |
|---|---|---|---|---|
| 1.00 | Non BSR Item - Supply, installation, testing and commissioning of Outdoor Units with Scroll compressor, copper condenser and required accessories for connnecting with AHU with R-407C/ R-410 Refrigerant Complete with Controller alongwith Thermostat, Potential free Contacts for Remote Operation etc. Makes : Daikin / Blue Star/ Hitachi / Voltas/ Carrier 11 TR in Twin ckt (2X5.5 Tr) | 2 | Set | 1,90,000 ₹3,80,000 Lowest |
| 2.00 | Supplying, installing, testing and commissioning of double skin construction Air Handling Units as per specification. AHU's shall be draw thru type, complete with pre & fine filter section including Filter, minimum 6 row deep DX coil of copper tube & aluminium fins, flexible duct connection, squirrel cage induction motor, DIDW backward curve fan(s), belt drive, vibration isolators and mixing box for return air, fresh air. Fan Motor shall be suitable for 415±10% volts, 50 Hz, 3 phase AC supply and shall be high efficiency (IE-2 Class). AHU shall be selected for a maximum coil of 500 FPM and filter face velocity of 350 FPM. The AHU inner skin shall be 0.6 mm pre coated GI, outer skin shall be 0.6 mm pre coatd GI, The AHU panel shall be 25mm thick 40 Kgf PUF insulation with thermal break profile, The AHU shall be complete with AHU kit of following capacities. MAKE: EDGETECH / ZECO / SYSTEMAIR / VTS
AHU (CFM) TYPE RD SP (mm) PHASE
4400 FM 6 100 3 | 2 | Each | 2,35,000 ₹4,70,000 Lowest |
| 3.00 | Supply, installation testing, commissioning and validation of Laminar Flow Units (LFU) comprising of Terminal EU 13 HEPA Filters of 99.997% Efficiency down to 0.3 Micron particle size installed in zero leakage Al frame with Al perforated plate type Al grille, LFD laminar flow diffusers are constructed from 18 swg aluminium
sheet, perforated face with approx. 50% perforation of size 900x600mm-6nos, 600x600mm-3nos, including the cost of supply air 18 gauge Al plinum of size 8'x6'x2', including all connection complete in all respect. HEPA filter make: Thermodyne/ Spectrum/ Filtech/ Chemfil, Al duct make Hindalco / Sail / Jindal. | 2 | Each | 1,30,000 ₹2,60,000 Lowest |
| 4.00 | SITC of Heat recovery ventilation system of 1000 CMH for better indoor air quality with exhaust and fresh air supply and return duct connection with enthalpy wheel of MAKE: EDGETECH / ZECO / SYSTEMAIR / VTS | 2 | Each | 1,20,000 ₹2,40,000 Lowest |
| 5.00 | Providing and fixing of VFD of required ratings for 5000 CFM AHU with extendable sensor for giving control through surgen control panel | 2 | Each | 95,000 ₹1,90,000 Lowest |
| 6.00 | SITC of 1000 CFM capacity Circular duct fans(Inline Fans) of 1 phase ,230volt, 50 Hz, various capacity, Sound pressure level at 3 m : 53db, Insulation class of motor : B class, Enclosure class of motor : IP44 etc. complete in all respect of Make:- Systemair / Nicotra/ Kruger / Greenheck. | 2 | Each | 14,800 ₹29,600 Lowest |
| 7.00 | Providing & Fixing of Air Curtain suitable for door, SS Body, Door switch sensor Velocity 16 M/ sec or more of width 4 Ft Make Ravi Aircon/Metal Joint/ Euronics | 2 | Each | 38,000 ₹76,000 Lowest |
| 8.00 | SITC of Analogue, Megnehelic Differential Pressure Gages, Die Cast Al. case, 4" dial face, Zero Center Range 30-0-30 Pa with SS Boxes Breathing Pipe & Standard accessories & make as approved by engineer in charge. | 2 | Each | 12,000 ₹24,000 Lowest |
| 9.00 | Electrical Control Panel for on & off the AHU's and outdoor system made by CRCA sheet including following Aluminium bus bar, incomer MCCB, Outgoing MCB and timers and wiring
Incomer
160 Amp. 4 Pole MCCB with over current, short circuit and approved make complete with breaking capacity 35 KA, rotary handle and spreaders complete as required. The panel shall complete with following accessories.
96x96 sq mm 0-200/5 amps CTR digital ammeter with 3 Nos. 200/5 amps, 15 VA Class I CT's. 1 set
96x96 mm sq. 0-500 Volt digital voltmeter with selector switfch. 1 set
BUS BAR
200 amps 3phase and neutral Aluminium bus bars with colored heat shrinkable insulating sleeves to suitable size. 1 set
OUTGOING
D.O.L.starter for AHU with on & off Push button and indication light ON & OFF and 25A rating of 3 Pole MCB, contactors and O relays, suitable rating . 4 set
32 Amp 4 Pole MCB complete 8 set
20 Amp MCB with indication lamp for strip Heater Set | 1 | Set | 1,30,000 ₹1,30,000 Lowest |
Tender Value
₹2.9 Cr
EMD Value
₹5.7 L
Closing Date
7 Aug 2024, 6:00 pmClosed
EE M and H Kota
Govt. CHC Dadabari Residential Qtr. A-1 Kota Raj.
SITC of Air Conditioning work in 100 bedded MCH Building at New Medical College Kota
2024_MEDIC_406210_1
EE M and H Kota NIT No. 04/2024-25
Open Tender
Electrical Works
Percentage
360 days
Kota
Please refer Tender documents.
3 documents required · 3 mandatory
₹3,000
EE M and H Kota
₹5.7 L
Yes
Jaipur
18 Sept 2024
16 Jul 2024
8 Aug 2024
16 Jul 2024
7 Aug 2024
16 Jul 2024
25 Jul 2024
Amount
Non BSR Item - Supply, installation, testing and commissioning of Outdoor Units with Scroll compressor, copper condenser and required accessories for connnecting with AHU with R-407C/ R-410 Refrigerant Complete with Controller alongwith Thermostat, Potential free Contacts for Remote Operation etc. Makes : Daikin / Blue Star/ Hitachi / Voltas/ Carrier 11 TR in Twin ckt (2X5.5 Tr)
Supply, installation testing, commissioning and validation of Laminar Flow Units (LFU) comprising of Terminal EU 13 HEPA Filters of 99.997% Efficiency down to 0.3 Micron particle size installed in zero leakage Al frame with Al perforated plate type Al grille, LFD laminar flow diffusers are constructed from 18 swg aluminium sheet, perforated face with approx. 50% perforation of size 900x600mm-6nos, 600x600mm-3nos, including the cost of supply air 18 gauge Al plinum of size 8'x6'x2', including all connection complete in all respect. HEPA filter make: Thermodyne/ Spectrum/ Filtech/ Chemfil, Al duct make Hindalco / Sail / Jindal.
SITC of Heat recovery ventilation system of 1000 CMH for better indoor air quality with exhaust and fresh air supply and return duct connection with enthalpy wheel of MAKE: EDGETECH / ZECO / SYSTEMAIR / VTS
Providing and fixing of VFD of required ratings for 5000 CFM AHU with extendable sensor for giving control through surgen control panel
SITC of 1000 CFM capacity Circular duct fans(Inline Fans) of 1 phase ,230volt, 50 Hz, various capacity, Sound pressure level at 3 m : 53db, Insulation class of motor : B class, Enclosure class of motor : IP44 etc. complete in all respect of Make:- Systemair / Nicotra/ Kruger / Greenheck.
Providing & Fixing of Air Curtain suitable for door, SS Body, Door switch sensor Velocity 16 M/ sec or more of width 4 Ft Make Ravi Aircon/Metal Joint/ Euronics
SITC of Analogue, Megnehelic Differential Pressure Gages, Die Cast Al. case, 4" dial face, Zero Center Range 30-0-30 Pa with SS Boxes Breathing Pipe & Standard accessories & make as approved by engineer in charge.
Bidder Name
Amount
Shanti Enterprises (GSTN-08ABHPA4131G1Z6) BID ID -2890581
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.40 MB
Tendernotice_2.pdf
PDF • 0.07 MB
Tendernotice_3.pdf
PDF • 0.09 MB
Tendernotice_4.pdf
PDF • 0.12 MB
Tendernotice_5.pdf
PDF • 0.38 MB
Tendernotice_6.pdf
PDF • 8.61 MB
Tendernotice_7.pdf
PDF • 5.33 MB
Tendernotice_8.pdf
PDF • 0.48 MB
Tendernotice_9.pdf
PDF • 0.20 MB
BOQ_732006.xls
BOQ • 0.38 MB
Technical-Bid-AIR-Cond..pdf
Tender Documents • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .