RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Ambulances ( 2 pieces ) Technical Specifications 1/6 * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Generic Parameters Vehicle Engine Capacity (in cc) 1947 * Type of Fuel Diesel Diesel Vehicle Emission Complaince BS-IV BS-IV Vehicle Mileage ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (in KM-Liter) 12 12.0 - 50.0 Or higher Top Speed (KM/Hour) 120 120.0 - 200.0 Or higher Acceleration(0-100K mPH) 28.49 1.0 - 28.49 Or lower Gradeability of Vehicle (in Degrees) 15 * Air Conditioning Without Without Engine BHP@rpm (HP@rpm) - * Engine Torque Max@rpm (N-M@rpm) - * No. of Cylinder in Engine 3 3.0 - 10.0 Or higher No.of Doors 5 * Fuel Tank Capacity 63 63.0 - 100.0 Or higher Ground Clearance 210 * Wheel Base 3050 * Kerb Weight 1985 1985.0 - 5000.0 Or higher Gross Vehicle Weight 2875 2875.0 - 5000.0 Or higher BIS marked Pneumatic Tyres and tubes for both front and rear Yes Yes Vehicle Transmission System Manual Manual No. of Speed/Forward Gears 5 * Type of Wheel drive Two Wheel drive( Rear Wheel) Two Wheel drive( Rear Wheel) 2/6 Drive Axle Rear Rear Type of Steering Power Power Turning Radius 7000 * Vehicle Brake ABS Fitted Yes Yes Front Vehicle Brake Disc Brake Disc Brake Rear Vehicle Brake Drum Brake Drum Brake Vehicle Air Intake System TurboCharged TurboCharged Driver Airbag No Yes
RequiredNo Certification Parameters Vehicle Certification ARAI/VRDE/ICAT No - * Conformity to G S R 868(E)
RequiredCentral Motor Vehicles(Ninth Amen dment)Rules
Required2016 and Road Ambulance as per AIS-125(Pt- I)2014with all amendments till date Yes Yes Performance Parameters Warranty Time (in months) 36 36.0 Warranty Distance (Km) unlimited in warranty period No No Warranty Distance (Km) If not unlimited in warranty period 300000 * Battery Warranty (in months) 12 * No. Of Free Service 7 7 Low Fuel warning Light Without Without Central Locking No Yes
RequiredNo Transportation Charges including transient insurance and temporary registration(in Rs/Km) - * Constructional Parameters Vehicle Colour Type Solid Solid Colour of the Vehicle White White Type of Vehicle Body Chassis Frame Chassis Frame Length of Vehicle Body (mm) 4832 4832.0 - 10000.0 Or higher 3/6 Width of Vehicle Body 1790 * Height of Vehicle Body 2055 * Boot Space (in Litres) 0 0.0 Size Of Tyre (mm) - * Size of Wheel - * Number of Stretchers 1 1.0 - 10.0 Or higher Hat type tube diameter for body of main structure welded with NA for Monocoque NA for Monocoque Hat type tube diameter( thickness) for side and roof of main structure welded with NA for Monocoque NA for Monocoque Base Frame Structure ISMC ISMC Exterior Panel of side body and roof NA for Monocoque NA for Monocoque Interior Panel of side body and roof NA for Monocoque NA for Monocoque Flooring Made Out from ISI Marked 12 mm thick BWR grade plywood covered with Vinyle Aluminum sheet Yes Yes Seating Plan Yes Yes Doors Yes Yes Glasses No Yes
RequiredNo Medical cabinet inside of rear saloon Yes Yes swiveling Fan in side of rear saloon Yes Yes SS washbasin with water tank in side of rear saloon No Yes
RequiredNo Exhaust Fan No Yes
RequiredNo Other fitments - Roof revolving light
RequiredSiren etc Yes Yes Rear Saloon Yes Yes Boot Space availability No Yes
RequiredNo 4/6 Day & Night View Mirror No Yes
RequiredNo * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
