Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.7 LAccepted-AOC 22 JANKALYAN SOCIETY NAVJIVAN AJWA ROAD BARODA 390 019 | BARODA | VADODARA | GUJARAT | 390019 | L1 | Accepted-AOC Lowest Quoted bidder. | |
| 2 | L2₹44.2 L+₹91,539 (2.12%)Rejected-Finance | L2 | Rejected-Finance Higher Quoted bidder. | |
| 3 | L3₹46.3 L+₹3.0 L (6.93%)Rejected-Finance | L3 | Rejected-Finance Higher Quoted bidder. | |
| 4 | Rejected-Technical 38 BHARKATIYA JOSHI NEAR POST OFFICE JHULAGHAT ROAD PITHORAGARH UTTARAKHAND 262520 | PITHORAGARH | PITHORAGARH | UTTARAKHAND | 262520 | - | Rejected-Technical Due to exceeding the limit of maximum work load. |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
1 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Pithoragarh
GE Pithoragarh Post Bharkatia Pithoragarh ( UK)PIN-262520
Provn of wall hardstanding Bldg No P-6/8 Spl rep to Hardstanding Bldg No P-9/8 P-10/8 P-11/8 Provn of toilet Bldg No P-11/8 and Spl rep to Bldg No P-7/8 at Mil Stn Pithoragarh
2022_MES_523187_2
8468/PGH/E8
Open Tender
Civil Works
Item Rate
180 days
GE Pithoragarh
Class D, Cat a(i)
6 documents required · 6 mandatory
₹500
GE Pithoragarh
₹99,000
Yes
1 Aug 2022
10 Jun 2022
2 Jul 2022
10 Jun 2022
1 Jul 2022
17 Jun 2022
Amount
DESCRIPTION OF ITEMS
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation etc and getting out in hard/dense soil complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed.
Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.
Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified and as directed.
Filling under floor (except material) including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified.
Removing excavated material n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.
Removing excavated material exc 250 m but n. exc 500 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.
Demolition of Cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition of reinforced cement concrete any description and in any position not otherwise specifically provided complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed
Dismantling timber scantlings 40 sq cm and over in section in any position in framed work .
Dismantling wrought iron or mild steel work of any description not otherwise provided for steel door complete all as specified and as directed.
Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) complete all as specified and as directed .
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each complete all as specified and directed.
M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in surface channel and drain complete all as specified & directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl forms , moulds ,mitred stopped ends etc.
Supply & Fix 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
Demolition and breaking up drain pipes (Salt glazed ware ,AC or reinforced concrete ) in cement mortar internal dia of pipe in 150mm to 200mm dia complete all as specified and as directed.
M&L for 200 mm dia reinforced concrete pipes, class NP2 with one collar per length of pipe complete all as specified and as directed .
M&L for concrete bed to 200mm drain pipes including forming cradles in PCC 1:4:8 type D2 using 40 mm graded stone aggregate complete all as specified and as directed .
M&L for RCC (Nominal mix) 1:2:4 type B-1 using 20mm graded stone aggregates as in Slabs supported on walls,beams and columns in floors,roofs,chajja, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L, providing cement concrete1:2:4 type B1 as in, coping, benching, bressumers, steps, incl necessary form work complete all as specified and as directed.
M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.
M&L RCC M-25 (Design Mix) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.
M&L RCC M-25 (Design Mix) as in columns, pillars, piers etc complete all as specified and as directed.
M&L RCC M-25 (Design Mix) as in beams, cantilever, lintels etc complete all as specified and as directed.
M&L RCC M-25 (Design Mix) as in slabs supported on walls, beams and columns etc complete all as specified and as directed.
M&L RCC M-25 (Design Mix) as in chajjas complete all as specified and as directed.
Use & waste of form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc rough finished surfaces of concrete flat complete all as specified and as directed.
Use & waste of form work to soffits of suspended slabs such as roof slab landings and similar works n exc 200mm thick (horizontal or slopping) for rough finished surfaces of concrete flat complete all as specified and as directed.
Use & waste of form work to chullah hoods, chajjas and similar items incl edges rough finished surfaces of concrete flat complete all as specified and as directed.
Use & waste of for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide complete all as specified and as directed.
Use & waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for rough finished surface of concrete complete all as specified and as directed.
Use & waste of form work to sides of pillars, posts, struts, columns for rough finished surface of concrete complete all as specified and as directed.
M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality complete all as specified and as directed.
Ditto all as per Item No 37 above but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders complete all as specified and as directed.
M&L for TMT bar 6 to 8 mm dia including cutting bending and binding with MS wire anealed dia not less than 0.9 mm conplete all as specified and as directed.
M&L providing cement concrete 1:2:4 of type B0 using 12.5 mm graded stone aggregate 40mm thick as in damp proof course to horizontal or slapping or vertical incl. necessary form work and applying evenly a coat of blown type bitumen at the rate of 1.50 Kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm complete all as specified and as directed.
Demolition of brick work or stone boulder masonry, precast concrete articles and pre-cast cement concrete block walling, ashlar fencings, dressed stone work including all quoins, arches, pillars etc. built in cement mortar complete all as specified and directed.
M&L precast cement concrete Block Masonary with solid blocks type C1 1:3:6, 20mm graded stone aggregate exc 10cm in width and setting in mortar 1:6 complete all as specified and directed .
Ditto as per Item No 42 above but except blocks.
M&l for precast concrete Kerb stones factory made type B1, 1:2:4 using 20mm graded stone aggregate 10 to 15cm thick and setting in CM1:6 including taking out existing broken stone with necessary excavation etc complete all as specified and directed.
Ditto all as per Item No 44 above but fixing only complete all as specified & directed.
M & L 15 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 finished fair and even complete all as specified and directed.
M & L 15 mm thick cement plaster on otherthan fair faces of brick work or concrete surface on wall in CM 1:6 finished fair and even complete all as specified and directed.
M&L 5mm thick rendering in CM 1:3 on ceiling, soffits, chajja projection complete all as specified and directed
M&L for 12 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:6 finished the plaster surfaces fair and even complete all as specified and directed.
M&L for 15 mm thick screed bed in CM 1:4 mixed with water proofing compound as per manufacturer instruction, finishing the surface even and fair without using extra cement complete all as specified and directed. Note: Water Proofing compound to be measuared & paid sepatately.
Supply only water proofing compound, complete all as specified and directed.
M&L for hard core of broken stone or boulders gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L for cement concrete type E2, 1:5:10 using 40mm graded stone aggregate as in foundation filling and mass concrete or for embedding of posts etc complete all as specified & directed.
M&L for 75mm thick PCC 1:4:8 of type D-2 using 40mm graded stone agrregate as in sub base of floors etc complete all as specified and directed.
M&L for 100mm thick PCC 1:4:8 of type D-2 using 40mm graded stone agrregate as in sub base of floors etc complete all as specified and directed.
M&L PCC 25mm thick 1:2:4 of type B1 using 20mm graded stone aggregate as in sub base of flooring complete all as specified and as directed.
M&L PCC 25mm thick 1:2:4 of type B1 using 20mm graded stone aggregate as in floor finishing surface complete all as specified and as directed.
M&L PCC 40mm thick 1:2:4 of type B1 using 20mm graded stone aggregate as in flooring finished rough to receive floor finishes complete all as specified and as directed.
M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded Stone aggregate in plinth protection finished even and smooth without using extra cement complete all as specified and directed.
Forming construction joints 30mm deep x10mm wide filled with sealing compound grade "A" complete all as specified and as directed.
S&F 1.25 mm thick Pressed steel frame size 125 x 60 for doors with one or more rebates including necessary fixing lugs, hinges ( 125mm long-06 Nos & 75mm long - 2 Nos for each door ), lock strike plate, hold fast etc., including Frames shall be filled with PCC 1:3:6, type C-0 (12.5 mm graded stone aggregate) complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast ,in window cill or door cill, steps copoing kneelers, apex stone, pier caps stone set in CM 1:6 etc complete all as specified and directed.
M&L preparation of new wooden surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
M&L preparation of old previously treated wooden surface exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Supply and fixing 30 mm thick Glass Fibre Reinforced Plastic (F.R.P.) panelled door shutter of required colour and approved brand and manufacture ,made with fire -retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings ,cast monolithically with 5mm thick FRP laminate for panels conforming to IS : 14856 , including fixing to frames , complete all as specified by the manufacturer complete all as specified and as directed.
S&F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30 mm thickness .The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat .Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs . the frame shall be covered with fibrer glass from all sides M.S. stay shall be provided at the bottom to steady the frame , complete all as specified and as directed.
S & F Butt hinges 100mm, extruded aluminium alloy with galvanized mild steel hinge pin, anodised of type B-22 and complete all as specified and as directed.
S&F 200mm aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.
S&F mild steel barrel tower bolt stove enameled black 200 mm size with bright bolt complete all as specified and directed.
S&F mild steel pressed handle oval type 150 mm size, stove enameled black complete all as specified and as directed .
S& F 125 mm extruded aluminum alloy handles, fabricated type anodised complete all as specified and as directed.
S&F MS 300 mm ordinery rat tail rod pattern spring including roller and roller plate complete all as specified and as directed .
S&F 250mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet ,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy ,complete all as specified and directed.
Supply & Fix 300mm long Mild steel sliding door bolt , plate type stove enamelled black with bright bolt not less than 16mm dia with and including minimum of 6 bolts and nuts four on plate and two on staples plat and fixed complete all as specified and directed.
S&F Steel windows with side hung shutters including hinges with steel handle, and steel tower bolt complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F Steel windows with side hung shutters including hinges with steel handle, and steel tower bolt, complete without glazing bars, dovetailed or welded complete all as specified and directed.
S&F Steel ventilators, top hung, with glazing bars with hinges and peg stay etc complete all as specified and directed.
S & F M.S. Framed work such as grills grating etc. with ends of bars sholdered and / or riveted into spikes, framed guard bars / railings and similar work conforming to Fe-410-o or Fe-310-0 complete all as specified & directed.
Supply & Fix Rolled mild steel framed work as in doors frame or gates of angle or other section with gusset plates, rails, braces etc, compelete drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with and incl. either hooks and hinges or steel hanging door fittings (exclsive of steel sheeting or other covering , running rails and guides) and hanging, also fastening and fixing compelete all as specified & directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed.
S&F standard aluminium section powder coated any colour as approved for window frames/shutters sliding/ partitions etc including jointing cleat and rubber eading/linning, Pivot ,locking aragement and all hardware etc and fixed in position with stainless steel screws all as specified and as directed.
Preparation of newly plastered surfaces of ceiling and applying three coat of white wash including cornices etc complete all as specified and directed.
Preparation of newly plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.
Preparation of plastered or unplastered old decorated surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soots, treating oily/greasy spots, moss and efflorescence and applying two coat of white wash on ceiling including cornices etc complete all as specified and directed.
Preparation of plastered or unplastered old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soots, treating oily/greasy spots, moss and efflorescence and applying one coat of white wash on wall including cornices etc complete all as specified and directed.
Preparation of new plastered surfaces and applying two coat of oil bound distemper over and including a layer of wall care putty to achive a smooth finish surface (average thickness 1 mm) complete all as specified and directed.
Preparation of old plastered surfaces by complete removal of existing treatment and applying two coat of oil bound distemper over and including a layer of wall care putty to achive a smooth finish surface (average thickness 1 mm) complete all as specified and directed.
Preparing of plastered or unplastered old decorated surfaces of walls by complete removal of existing treatment, moulds, moss and efflorescent salt and treating oil and greasy spots and applying three coat of white wash on walls including cornices etc complete all as specified and directed.
Preparation of new (Previously untreated) plastered surfaces of walls and applying two coats of cement based paint on walls, complete all as specified and directed
M & L preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
M&L, preparation old, previously treated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint on the steel surfaces, complete all as specified and directed.
M & L preparation of new steel or iron surfaces of any description not otherwise described n.exc 10 cm width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
M&L, preparation old, previously treated concrete surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for rubber moulded Exterior grade joint less coloured tiles 10 mm thick ,area exc 0.06 sqm but n.exc 0.38 sqm with grey cement and pigments, set & jointed in neat cement slurry and pointed with cement & suitable coloured pigment to match the tiles in floors over and including 15mm thick screed bed in CM 1:6 and taking down of existing completee all as specified and as directed.
S&F non-skid joint free ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but n exc 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.
M & L glazed ceramic coloured tiles area exc 0.06 Sqm but n.exc 0.18 Sqm on walls etc set & jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces over &.incl 10mm thick rendering in cement mortar 1:4 for laying wall tiles etc complete all as specified and directed.
M&L for rubber moulded chequered cement concrete coloured tiles 25 mm thick ,area exc 0.06 sqm but n.exc 0.16 sqm with grey cement and pigments, set & jointed in neat cement slurry and pointed with cement & suitable coloured pigment to match the tiles in floors over and including 20 mm thick screed bed in CM 1:6 completee all as specified and as directed.
M&L for applying plaster of paris putty of 1mm thick over plastered surface to prepare the surface even and smooth complete all as specified & directed.
M&L for two coats of exterior emulsion paint (weather coat of Berger or equivelent ) over a coat of primer over a thin layer of external wall putty to achieve a smooth finish surface over newly plastered surface of wall complete all as specified and as directed.
M&L for two coats of exterior emulsion paint (weather coat of Berger or equivelent ) over a coat of primer over a thin layer of external wall putty to achieve a smooth finish surface over old surfaces of wall after complete removal of existing treatment complete all as specified and as directed.
S&F factory made solid PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.
S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of M S tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PCV ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawings.
Cutting chases in brick wall, stone concrete block or slab walls, pining in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings ,steps,cills sunshades, shelves , lintels, etc and cutting chases for concealed water tubing and making good , cutting n'exc 10 cm girth complete all as specified and directed.
Dismantling wall and ceiling boards, partitions of any description or in any position (fibre, pulp, insulation etc.) any thickness, or insulation boards/ slabs/ blankets of any thickness including cover fillets complete all as specified and directed.
Supply & Fix GI powder coated snap grid frame work for false celling comprising of the following sections for making partitions of 600x600 mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 4mm dia GI wire suspender of suitable length complete all as specified and as directed :- (i) main tee of size -32mmx24mmx0.3mm (ii) cross tee of size -26mmx24mmx0.3mm (iii) wall angle - 24mmx24mmx0.3mm
S & F 4 mm thick E-Board classic for, 595 x 595 mm size fixed with staples on snap grid as in ceiling complete all as specified and as directed.
S&F anodized aluminium door & frame powder coating (minimum thickness of powder coating 50 micron) 2 mm thick, fixed with anodized aluminium snap beading, glazing clips, joining clips, screws and 02 Nos of aluminium handle on each door shutter, aluminium anodized tower bolt 200mm long 02 Nos on each shutter and mortice lock device complete with double keys for each lock, 01 No floor spring for each shutter complete all as specified and directed with following specifications :- (a) Aluminium door frame =101.50x44.45mm (b) Aluminium style/top & middle rails of shutter=83.5x44.45mm (c ) Aluminium bottom rail of shutter=114.50x44.45mm (d) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed.
S&F sheet glass 5.5 mm thick ordinary quality and glazing with oil putty in square n.exc 0.8 sqm in each pane complete all as specified and as directed.
S&F rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed.
Ditto all as per Item No 110 above but except material complete all as pecified & directed.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
M & L, Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in single length complete all as specified and directed.
M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.
S&F 15mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.
S&F 20mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.
S&F 20 mm bore Gate valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed.
S&F 15 mm bore dia Stop/angle valves fancy type Chromium plated screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F 15mm bore dia Bib taps chromium plated with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .
S&F plain aluminium sheeting 0.56mm thick , alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing ( length and girth as fixed) complete all as specified and directed.
M & L for GI wire netting 0.90 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc. in walls , ceilings, stanchions, beams, etc. including all laps , cutting and waste complete all as specified and directed.
S&F 20mm to 25mm thick Hard wood 2nd class weather boarding clean sawn and rebated on thick edge to give 25 mm laps and wrought both side and edges shot and chamfered fixed to roof hight of bldgs complete all as specified and directed .
S&F in repair 28mm dia fancy type Stainless steel drapery rod fixed with stoper, brackets etc to wall complete as sample approved all as specified and directed.
Granite (of any type of coloured) work (table rubbed and polished) 20mm thick in steps jambs,pillars, window cills, cooking plateform /partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete all as specified and as directed.
S&f vitreous chine wash basin flat back, size 550x400mm including PVC waste pipe and waste coupling fixed with iron angle bracket complete all as specified and directed.
S&F Pillar taps (fancy type) ,cast copper alloy,with capstan heads,chromium plated screwed down high pressure ,with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed,complete all as specified and as directed.
S&F 50mm PVC (SWR) pipes single socket in any length and including bends and sockets complete all as specified and directed
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.
S&F aluminium peg sets of 6 pegs complete all as specified and as directed.
S&F 450mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.
S&F 600x450 mm bevelled edge of slected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed.
S&F Brass chromium plated Tubular towel rail , 20mm dia, D type, 60cm long between falnges complete all as specified and directed.
Supply & Fix vitreous china urinal, Half stall type, white (excluding flushing cistern) incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe, grating and union for discharge pipe incl supply and fixing of 32mm bore 60mm long discharge pipe complete all as specified and as directed.
Supply & Fix Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe , antisyphonage pipe ,with PVC seat cover of same colour etc complete all as specified and directed.
S&F PVC valveless, syphonic action type, flushing cistern, 10 lits capacity low level, white, with inlet, ball valve, float and handle including brackets, flush pipe and connection to pipes complete all as specified and as directed.
S&F C P Hand shower (health faucet) 1 mtr PVC tube with wall hook complete for EWC, all as specified and directed.
S&F Two way bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.
S & F Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.
S&F rotational moulded polethylene water tank of 500 ltrs capacity ( cylindrical vertical with closed top) noticed and portion all as pacific SSR Part- I.
S&F 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms ) complete all as specified and directed.
S&F PVC (SWR) floor trap with CP grating including jointing to waste pipe 75 mm bore outlet with solvent cement complete all as specified and as directed.
S&F PVC (SWR) bends 75 mm bore with or with out oval excess door complete all as specified and as directed
S&F PVC (SWR) bends 110 mm bore with or with out oval excess door complete all as specified and as directed
S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and as directed.
S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed laid in trenches or in floors or in weep holes etc complete all as specified and as directed.
S&F 50 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed laid in trenches or in floors etc complete all as specified and as directed.
S&f RCC NP3 150 mm diameter Pipes laid on150 mm thick PCC Cradle PCC 1:4:8 bed with excavation in depth 0.70m – 1.65 m in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional complete all as specified and as directed.
M&L for water proofing treatment to roof surfaces including a coat of cold applied bituminous shalitex primer @ 0.30 Lit per sqm evenly on roof surface and a coat of hot blown bitumen 85/25 @ 1.2 kg/sqm shall be applied on primed surface and laying of 3mm thick APP modified polymeric membrane (weight not less than 3.0 Kg/Sqm) unrolled and bonded completely to the substrate with side over lap of 75 mm & end over lap of 100 mm and then scaled/ fused by flame or bitumen and a coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm shall be applied on top of APP modified polymeric membrane as per manufacture instruction and finally finishing with a coat of bituminous aluminium paint @ 0.20 Kg/Sqm, complete all as specified and as directed.
E&M Portion: Taking down carefully Copper/Aluminium point wiring (Light ,fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc), removing unserviceable or serviceable materials from site and making good the disturbed surface of walls, floors etc, complete all as specified and directed.
M&L for point wiring Concealed with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic PVC surface / concealed conduit 20 mm or higher dia, light grade ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire of PVC insulated, unsheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly , screwed with Brass screws, cup washers complete all as specified and directed for One light point/Fan point controlled by one, one way switch of 5/6 Amps complete all as specified and as directed.
Ditto all as per Item No 151 above but for one 3/5 pin socket outlet 5/6 Amp on same board with other switch of 5/6 Amp.
Ditto all as per Item No 151 above but for one 3/5 pin 5/6 amps socket outlet point on independent board controlled by one, one way switch of 5/6 amps on independent board.
Ditto all as per Item No 151 above but with 2.5 Sq mm cable (FRLS) for one 15/16 Amp socket outlet controlled by one switch on independent board and 2.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete.
S & F in repairs Switch piano, flush type, white finish, 5/6 amps, single pole, one way all as specified and directed.
S & F Switch piano, flush type, white finish, 5/6 amps, single pole, one way all as specified and directed.
S&F in repairs Switch piano flush type, white finish, 15/16 amps, single pole, one way, complete all as specified and directed.
S&F Switch piano flush type, white finish, 15/16 amps, single pole, one way, complete all as specified and directed.
S&F in repairs Socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps flush type, complete all as specified and directed.
S&F Socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps flush type, complete all as specified and directed.
S&F in repairs Socket outlet two in one 3 pin 5/6 amps and 3 pin 15/16 amps (multipurpose), flush type, non shutters, non inter locking type, complete all as specified and directed.
S&F Socket outlet two in one 3 pin 5/6 amps and 3 pin 15/16 amps (multipurpose), flush type, non shutters, non inter locking type, complete all as specified and directed.
S&F in repairs ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.
S&F ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.
S&f in repairs electronic fan regulator flush type, switch size step type, 230 volts ISI marked complete all as specified and directed.
S&f in repairs recess mounted LED 2x2 luminaire 36W, slim ceiling light with extruded aluminium housing and milky diffuser complete all as specified and directed.
Supply and fixing in repairs LED Integrated Batten T5 box type surface mouted, (1x20 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.
Supply and fixing LED Integrated Batten T5 box type surface mouted, (1x20 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.
Supply and fixing in repairs LED Integrated Batten T5 box type surface mouted, (1x09 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.
Supply and fixing LED Integrated Batten T5 box type surface mouted, (1x09 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.
S&F in repairs 1x25 watt LED building security light fitting , PDC housing,IP-65 with 4 KV inbuilt surg protection driver, pressure die-cast aluminium including fixing the same of GI pipe 25 mm dia bore light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x 4mm duly painted and suitable size of nut & bolts etc. and making electric connection with PVC three core copper flexible wire complete all as specified and directed.
S&F 1x25 watt LED building security light fitting , PDC housing,IP-65 with 4 KV inbuilt surg protection driver, pressure die-cast aluminium including fixing the same of GI pipe 25 mm dia bore light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x 4mm duly painted and suitable size of nut & bolts etc. and making electric connection with PVC three core copper flexible wire complete all as specified and directed.
Supply and laying in repairs XLPE LT 1100 volts underground earthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 1100V with multi stranded, aluminum conductor of cross sectional area 4 core x 16 Sqmm including laying, testing and commissioning complete all as specified and directed.
Supply and laying XLPE LT 1100 volts underground earthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 1100V with multi stranded, aluminum conductor of cross sectional area 4 core x 16 Sqmm including laying, testing and commissioning complete all as specified and directed.
M&L in repair for sub main wiring with 1100 volts grade PVC insulated and unsheathed cable with stranded copper conductor 2x6 Sqmm, of code Red for Phase, Black for Neutral & Green for Earth concealed in wall and drawn including PVC conduit along with 6 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.
S&F in repairs MCB DB sheet metal enclosure for DB, SPN, 8 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators,concealed in wall complete all as specified and directed.
S&F MCB DB sheet metal enclosure for DB, SPN, 4 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators,concealed in wall complete all as specified and directed.
Supply and Fix in repairs MCB single pole, 240 volts, 6-32 Amps of 10 KA complete all as specified and directed.
Supply and Fix MCB single pole, 240 volts, 6-32 Amps of 10 KA complete all as specified and directed.
Supply and in repairs Fix MCB single pole & Neutral 240 volts, 40 amps, of 10 KA complete all as specified and directed.
Supply and Fix MCB single pole & Neutral 240 volts, 40 amps, of 10 KA complete all as specified and directed.
Supply and fixing of fresh air fan, single phase 230/240 V OF size 250 mm sweep 1400 RPM with suitable louvers and making connections with twisted copper flexible wire complete all as specified and directed.
M/s Rana Enterprises
LAXMI DATT & J C PANT
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .