Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.5 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹46.3 L+₹6.4 L (16.1%)Rejected-AOC | L2 | Rejected-AOC Being not L1 | |
| 3 | L3₹48.3 L+₹8.4 L (20.9%)Rejected-AOC | L3 | Rejected-AOC Being not L1 |
Tender Value
₹45.8 L
EMD Value
₹91,540
Closing Date
22 Oct 2022, 6:00 pmClosed
Shri M Saravanan, IDSE, GE
Garrison Engineer North 35 Allenby Lines Secunderabad 500087
PROVN OF ADDN ALTN TO BATHROOM TOILET IN CERTAIN BLDG OF JCOs OR MD ACCN PROVN OF 250 X CEILING FAN ALONGWITH NECESSARY ACCESSORIES FOR OTM AND MD ACCN AT 8 FD REGT PROVN OF CERTAIN E M ITEMS AT SERVER ROOM IN CDM AND PROVN OF DEFICIENT EXHAUST FAN A
2022_MES_554148_1
8624
Open Tender
Civil Works
Item Rate
180 days
GARRISON ENGINEER NORTH SECUNDERABAD
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER (NORTH) SECUNDERABAD
₹91,540
Yes
2 Jan 2023
24 Sept 2022
24 Oct 2022
24 Sept 2022
22 Oct 2022
8 Oct 2022
Amount
Dismantling wall floor or hearth tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and as directed.
Demolition of concrete of any description and in any position in sunken floors etc complete all as specified and as directed.
M & L for application of one coat of water based bitumen emulsion primer @ 0.3 lit per sqm including cleaning of surface thoroughly from dust & dirt. Lay water proofing treatment with polymetric membrane 3 Kg/ sqm standard consisting of 90 micron, HMHDPE torch on membrane over a coat of blown bitumen 85/25 @ 1.2 Kg/Sqm on top of membrane and providing 25 mm thick sand cushioning to receive lean concrete in sunken floor complete all as specified and as directed.
M & L for rendering 15mm thick in cement mortar (1:3) on fair faces of brick/concrete surfaces of sunken floors, including taking down extg plaster and mixing of water proofing compound at the rate of 2% by weight of cement, finished even and fair complete all as specified and as directed. NOTE: WPC will be measured and paid separately.
M&L for PCC (1:7:12) type F2 using 40 mm graded stone aggregate as in filling and mass concrete complete all as specified and as directed.
M&L for PCC 1:2:4 type B0 using 12.5 mm stone aggregate of average 25 mm thick make to slope in sunken floors complete all as specified and as directed.
S & F in repairs 32 mm dia GI pipe medium grade in short lengths for spouts including cutting holes in walls and making good with CM (1:3) complete all as specified and as directed.
Taking down chowkats with shutter (without taking off shutters from the frame) not exc. 1.5 Sqm each complete all as specified and as directed.
Taking down cement plaster/terrazzo dado of any description on brick & stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.
Demolition and breaking up drain pipes (salt glazed ware AC or reinforced concrete) set in cement mortar 100mm dia complete all as specified and as directed.
All as per item above but 75mm bore complete all as specified and as directed.
Taking up or down steel tubing and connections, including cleaning for refixing (or) removed to store, 15 mm bore complete all as specified and as directed.
Taking up or down steel tubing and connections, including cleaning for refixing (or) removed to stone, 20 mm bore complete all as specified and as directed.
M&L for Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc 0.11 but n exc 0.18 sqm in floors, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles complete all as specified and as directed.
M & L for coloured glazed ceramic tiles 450x350x7mm thick on vertical surfaces set and jointed neat cement slurry and pointed in coloured cement to match complete all as specified and as directed.
M & L for screed bed 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.
M & L for rendering 10mm thick in CM 1:4 on brick on concrete surface as backing coat of tiles complete all as specified and as directed.
S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube supplying & fixing in openings as per specification & drawings complete all as specified and as directed.
S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per drawings and specifications complete all as specified and as directed.
S & F 100mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B1 complete all as specified and as directed.
S&F 200mm long aluminum anodized barred tower bolts, of extruded section with bright bolt complete all as specified and as directed.
S&F extruded aluminium alloy handles fabricated type, anodised 150 mm long complete all as specified and as directed.
S&F Ventilator made with 5mm PVC sheet a overall outer dimensions of size upto 0.55 sqm incl aluminium mongery. The rails and styles shall be 40x57 mm duly reinforced with 19x19mm steel tube. The ventilator is divided into two equal parts panels with mullion of 62x57mm. The bottom portion of the ventilator is fitted with 3.5 mm pin head glass and top portion is divided with louver arrangement for placing the glasses including 12 mm dia 2 Nos of bars in each panels complete all as specified of size not exc 0.60 sqm each complete all as specified and as directed.
M&L for brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 as in walls etc including demolition of brick work built in cement mortar complete all as specified and as directed.
M & L for 15mm thick rendering on brick masonry or concrete surface, in CM 1:6 including finished the surface smooth and even without using extra cement complete all as specified and as directed.
M & L for rendering 5mm thick on brick masonry surface in CM 1:4 over 10mm thick in CM 1:6 including water proofing compound at the rate of 2% by weight of cement and finished the surface smooth and even without using extra cement complete all as specified and as directed. NOTE: WPC will be measured and paid separately.
M & L for rendering 10mm thick in CM 1:4 on concrete surface of ceiling including finished the surface smooth and even without using extra cement complete all as specified and as directed.
Supply only integral water proofing compound complete all as specified and as directed.
M & L for three coats of white wash on walls including preparation of new surface complete all as specified and as directed.
M &L for two coats of colour wash over a coat of white wash on walls including preparation of new surface complete all as specified and as directed.
M & L for three coats of white wash on ceiling surfaces including preparation of new surface complete all as specified and as directed.
S & F in repairs Vitreous china Squatting pan orissa pattern size 580 x 440mm white with integral foot rest including connection to trap, and to flush pipe anti syphanage pipe etc complete all as specified and as directed.
S & F in repairs PVC low level flushing cistern 10 Lit capacity complete all as specified and as directed.
S & F UPVC/PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ laid in floor, 110mm bore complete all as specified and as directed.
S & F UPVC/PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ laid in floor, 75 mm bore complete all as specified and as directed.
Supply & fix in repair UPVC/PVC (SWR) branch piece, single (single Y or T etc) equal or unequal 110mm dia with access doors complete all as specified and as directed.
S & F 75mm UPVC/PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.
S & F UPVC/PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.
All as per item above but 110mm bore complete all as specified and as directed.
S & F UPVC/PVC (SWR) branch piece with access door single 'Y' equal or un-equal 75mm bore complete all as specified and as directed.
S & F 110 mm bore UPVC/PVC (SWR) vent cowl complete all as specified and as directed.
S&F of 25mm CPVC pipes SDR 11 including plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all as specified and as directed.
All as per item No.42 above, but 20mm bore complete all as specified and as directed.
S&F in repairs 15mm bib taps, cast copper alloy with crutch or butterfly handle screwed down for iron pipe complete all as specified and as directed.
S & F in repairs 15 mm bore stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union complete all as specified and as directed.
S & F PVC connection 15mm size with PTMT nuts of length 450 mm complete all as specified and as directed.
S & F swivel shower of PTMT any colour for fixing with 15mm pipe complete all as specified and as directed.
S & F in repairs Vitreous china wash basin white flat back size 550x400mm including brass chromium plated waste coupling 32mm, brackets, pillar cock 15mm bore chromium plated complete all as specified and as directed.
S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and as directed.
S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and as directed.
S&F Grating doom 100mm dia of PTMT (Minimum weight 25 grams complete all as specified and as directed.
M & L for Low density waste pipe 32 mm dia for working pressure rating 4 Kg/Sqcm with polyethylene union and check nuts 75 cm long suitable for WHB/URINAL complete fixed in repairs complete all as specified and as directed.
M & L for Point wiring on concealed conduit with 1.5 Sqmm FRLS copper conductor single core PVC insulated sheathed 1100V multistranded drawn through existing conduit and conduit accessories of suitable dia medium grade and modular accessories including fixing/grouting sunken/ surface alongwith modular flush box of suitable thickness covered with suitable modular cover plate including running up of 1.5 Sqmm FRLS copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all complete all as specified and as directed for one light/fan/Bell Point controlled by one, one way switch 5A, SP. NOTE: Rate of Modular Flush box and Cover plate are inclusive of rate quoted by the contractor.
Description all as per item No 54 here-in-before but using 4 Sqmm FRLS single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for AC Box point including running of 4 Sqmm FRLS copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed.
S & F Modular switch 1 way 10 A, 1 Module of capacity 230 volts complete all as specified and as directed.
S & F in replacement of Modular Single pole and Neutral enclosure with a two pin and earth plug and socket metal clad complete with one single pole MCB 20 Amps (AC Box) complete all as specified and as directed.
S & F Modular ceiling fan regulator suitable for BLDC fan stepped type heavy duty suitable to work on 230 volts, 2 Module complete all as specified and as directed.
S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and as directed.
S and F sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 Volts double door with magnetic locking system complete all as specified.
S & F MCB SP 230V suitable for fixing on MCB DB of capacity 6 to 32 Amps complete all as specified and as directed. Make: Indo Asian Cat Part No 811122-29 or equivalent in Legrand, Havells as approved by GE.
S & F MCB SPN 230V suitable for fixing on MCB DB of capacity 40 Amps complete all as specified and as directed. Make: Indo Asian Cat Part No 811152 or equivalent in Legrand, Havells as approved by GE.
M & L for Submain wiring with two single core 6 Sq mm PVC insulated unsheathed FRLS copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of suitable dia medium grade including running up of one run of 6 Sqmm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing complete all as specified and as directed. Note: Two runs of cable, one run of earth continuity conductor and one run of conduit shall be measured and paid as one unit length.
Supply and install AC hi-wall split units indoor/outdoor along with Outdoor bracket complete with cordless remote control unit for better indoor air quality with 3 star rating and suitable EER of capacity 2 TR complete all as specified and as directed. Make: Carrier/Voltas/Blue Star/Daiken/Hitachi
S & F wall mounted Copper wound Voltage Stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 90 V to 300 V with output voltage stabilized at 200 V to 240 V rated for 15 Amps of capacity 5 KVA having the low cut, high cut with time delay provision complete all as specified and directed. Make: Automatic Electric/Vinitec/Aplab/V-Guard/ Volina
Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Minimum air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. Make: Havells/Bajaj/Usha
S & F for exhaust fan heavy duty of metal body along with metallic shutters, frames, screws, bolts& nuts with four metal blades of 300mm sweep,1400 RPM including making of holes in the walls of any size, any thickness for fixing of the exhaust fan and making good wall surface as the existing wall, painting the wall including provision of PVC insulated copper flexible cord from ceiling rose to connection of exhaust fan complete all as specified and as directed. Make: HAVELLS Ventil Air DB 300MM/BAJAJ freshee 300mm/USHA aero clean plus 300mm.
Supply and Fixing 400 mm Wall Mounted Fan with double rotary string to regulate the speed complete and having speed of 2200 RPM with 100 watts of copper winding motor with Air Delivery of 100 CMM and accessories complete of 230 volts single pole to fix properly complete all as specified and as directed. Make: Midea BW 2200 Wall Fan of Bajaj or equivalent in Havells/Almonard as approved by GE.
Supply install commissioning and testing of commercial Air curtain unit for prevention of dust and conditioned air losses single phase 230 V 50 Hz made of MS/CRCA sheet of minimum 18 gauge thickness finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MSCRC 18 gauge square perforated suction grills, Aluminium alloy fans and single phase electric motor nozzles etc complete with fittings and accessories so as to produce 1-1.5 m/sec air velocity at floor level for door opening of size 46"x78" complete all as specified and directed. Make: Almonard/Aircon/Crompton Greaves/Filtrox.
M & L for Point wiring with 1.5 Sqmm copper conductor single core PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC conduit concealed/surface and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 2 mm thick MS of suitable size duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with suitable laminated sheet plates for fixing switches / sockets/ regulators etc including running up of 1.5 Sqmm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed for the following:- (a) One Ceiling Fan point/Exhaust Fan/light controlled by one, one way switch and regulator
All as per item No. 70 above, but one light/exhaust fan point controlled by one, one way switch complete all as specified and as directed.
S & F switch piano single pole flush type 5 amps, 230 volts complete all as specified and as directed.
S & F LED security light luminare 24/25 watts with deep drawn housing including all accessories and lamp, with suitable pipe bracket 25mm dia 0.6 Mtrs length fixed on wall with suitable flat iron clamps and nut bolts complete all as specified and as directed.
S&F MCB SP 6 to 32 Amps 240 volts for fixing on MCB DBs complete all as specified and as directed.
SKY CONSTRUCTIONS
VACON INFRASTRUCTURES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .