Source and Treatment Augmentation Works of Haldwani Kathgodam Water Supply Scheme under SPA Programme Scheme

Amount

Schedule-1 : Intake Works

Soil testing for bearing capacity, Hydraulic, Structural design & Construction of RCC Wet Intake Well of internal dia. 6 m and 15m height of well steining along with 4 m clear height Pump House in brick work masonry (1:6) over the well including 2 m wide RCC approach bridge of approximate length 12 m with gate as per conceptual drawing complete on the bank of Gaula river near Gaula barrage including all items what so ever required to construct it and make it functional such as timbering, dewatering, diversion of stream, supply and fixing of required number of suction perforated pipes, capable of delivering 4.6 MLD Raw Water in 23 hours, internal and external electrification work including necessary desilting arrangements & protection works such as Cement plum Masonry with 40% plum & 60% 1:3:6 cement concrete, etc. Base of the well shall be kept at minimum depth of 4.5m below the river bed level including supply of all materials, labour, T&P etc. complete required for proper completion of work as per directions of Engineer-in-charge.

Design and renovation work of existing Intake Chamber built at Coltax for delivering 63.70 MLD (26 cusec) raw water.The work consists of mainly PCC (1:2:4) for flooring, M-30 grade RCC for wall, Iron Gates for controlling inflow from the canal inside the chamber, MS Screen for screening of debris, MS Wire mesh over welded MS bars for covering the intake chamber and all other appurtenant works including supply of all materials, labour, T&P etc. complete required for proper completion of work as per directions of Engineer-in-charge.

Schedule-2 : Pipe Line Works

Excavation of earth for pipeline in following strata lift upto 1.5 m, lead upto 30 m including refilling, watering, ramming of excavated earth into the trenches and removal of surplus earth upto a distance of 60 m from trenches including supply of all materials, labour, T&P etc. complete required for proper completion of work

Soil mixed with Shingle, Bajri and Boulders

Medium Rock

Survey, Design, Supplying, Carting, Laying and Jointing of Raw Water Gravity Mains from Intake Chamber at Coltax to Sheeshmahal (Lower / Upper) WTPs consisting of following dia. of API 5L X56 Grade Pipes confirming to API 5L / ISO : 3183. The work includes Jointing by electric welding process with proper grade of eletrodes suitable for jointing of water supply pipe lines (Ador, L&T or equivalent quality of electrodes) by cutting of pipes and making required bends by welding, testing of pipe line etc. including supply of all materials, labour, T&P etc. complete required for proper completion of work.

400 mm dia., 4.8 mm thick

450 mm dia., 4.8 mm thick

500 mm dia., 5.6 mm thick

600 mm dia., 6.4 mm thick

Survey, Design, Supplying, Carting, Laying and Jointing of Rising Mains from Intake Well / Pump Houses / Sump cum Pump Houses to different GLSRs / OHTs consisting of following dia. of Centrifugally Cast (Spun) DI S&S K-9 Double Chambered Restrained Joint Pipes confirming to IS : 8329 / 2000 including supply of EPDM Rubber gaskets confirming to IS : 5382 / 1985 including DI double chambered restrained joint specials of class K-12 suitable for push-on jointing as per IS : 9523 / 2000 with testing of pipe line etc. including supply of all materials, labour, T&P etc. complete required for proper completion of work

100 mm dia.

150 mm dia.

200 mm dia.

250 mm dia.

Survey, Design, Supplying, Carting, Laying and Jointing of Supply / Feeder / Distribution Mains from different WTPs / GLSRs / CWRs to different Sump cum Pump Houses at OHTs / GLSRs and different feeding points, consisting of following dia. of Centrifugally Cast (Spun) DI S&S K-9 Pipes confirming to IS : 8329 / 2000 including supply of EPDM Rubber gaskets confirming to IS : 5382 / 1985 including DI specials of class K-12 suitable for push-on jointing as per IS : 9523 / 2000 with testing of pipe line etc. including supply of all materials, labour, T&P etc. complete required for proper completion of work

100 mm dia.

125 mm dia.

150 mm dia.

200 mm dia.

250 mm dia.

300 mm dia.

350 mm dia.

400 mm dia.

450 mm dia.

500 mm dia.

600 mm dia.

Supply, carting and fixing of the following Valves and fittings, Double Flanged type, mechanically operated, suitable for SCADA / Automation, including supply of all materials, labour, T&P etc. complete required for proper completion of work

Sluice Valve, CS Heavy Duty Class 150, confirming to API 600 Standard

400 mm dia

450 mm dia

500 mm dia

600 mm dia

Scour Valve, CS Heavy Duty Class 300, confirming to API 600 Standard

400 mm dia

450 mm dia

500 mm dia

600 mm dia

Air Valve, CS Double Acting PN-16 confirming to API 600 Standard

100 mm dia.

Sluice / Scour Valve, DI (PN 16) confirming to IS: 14846-2000

100 mm dia.

125 mm dia.

150 mm dia.

200 mm dia.

250 mm dia.

300 mm dia.

350 mm dia.

400 mm dia.

450 mm dia.

500 mm dia.

600 mm dia.

Non Return Valve, DI PN-16 confirming to IS: 14846-2000

100 mm dia.

150 mm dia.

200 mm dia.

250 mm dia.

Bulk Water Meter (Ultrasonic) confirming to IS: 779-1994 or ISO: 4064-2005 inline type, flange end with Integral mounted, Flow rate & Totaliser display, Battery opertaed (with five year battery life) Communication; UART / RS485, suitable against antifraud attempts etc.

100 mm dia.

125 mm dia.

150 mm dia.

200 mm dia.

250 mm dia.

300 mm dia.

350 mm dia.

400 mm dia.

450 mm dia.

500 mm dia.

600 mm dia.

Air Valve DI Double Acting, PN 16 confirming to IS 14845-2000 or BS 5163-2004

50 mm dia.

80 mm dia.

100 mm dia.

Construction of Valve Chambers for Sluice / Scour / Non Return / Air Valve / Bulk Water Meter Chambers of following sizes for Rising Mains, Supply / Feeder / Distribution Mains, Storage Reservoirs and Raw Water Gravity Mains including supply of all materials, labour, T&P etc. complete required for proper completion of work

1.20 m x 1.20 m x 1.00 m as per DSR Item No. 18.35.1

1.50 m x 1.50 m x 1.50 m in RCC 1:1.5:3 as per direction of Engineer-in-charge

Design and construction of Thrust Blocks for Rising Mains in RCC (1:1.5:3) of following sizes including supply of all materials, labour, T&P etc. complete required for proper completion of work

0.75 m x 0.5 m x 2 m

0.5 m x 0.5 m x 1 m

0.5 m x 0.5 m x 1.5 m

0.75 m x 0.5 m x 1.5 m

1 m x 0.5 m x 1.5 m

1.25 m x 0.5 m x 2 m

Schedule-3 : Treatment Works

Soil testing for bearing capacity, Design, Engineering, Construction Erection, Installation, Testing and Commissioning of Water Treatment Plants (24 hours operation) of following capacitites based on either Conventional or Alternate Technology consisting of all Civil, Electrical, Mechanical, Instrumentation, Automation & SCADA works for various components such as Inlet Chamber, Venturi Flume, Flash Mixer, Clariflocculator (Conventional) / Tube Settler, Lamella, etc. (Alternate), Rapid Gravity Sand Filters (Conventional) / High Rate Filters (Alternate), Filter House, Chemical House, Administraion and Laboratory building with proper arrangement for furnitures and lab test equipments, Interconnecting piping and accessories, Plant utilities, Site Office, Security room, Internal interconnecting walkways and paths, Internal Landscaping and Beautification works, Internal Lighting, etc. complete on Turn-key basis including supply of all materials labour, T&P etc. for proper completion of work as per directions of Engineer-in-charge.

7 MLD WTP at Sheetlahaat

12.5 MLD WTP at Sheeshmahal (Lower)

26 MLD WTP at Sheeshmahal (Upper)

Schedule-4 : Storage Reservoirs

Soil testing for bearing capacity, Design and Construction of RCC Clear Water Over Head Tanks (O.H.T.) of following capacities (In KL) and staging (in m) with 1.00 m wide R.C.C. stair case from G.L. to balcony and from balcony to top dome 1m x 1m R.C.C. landing at suitable locations and railed with 3 rows of 20 mm dia G.I. (M) pipe on 65x65x5 mm angle iron posts fixed with ladder, from top to the floor inside of the tank, M.S. M.H. cover with locking arrangement, lightning conductor as per electricity rules, water level indicator, supply and fixing of outlet, inlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover, ventilator column etc. complete with approved water proofing (apex) / enamal paint, testing, filling water for testing purpose etc. including supply of vertical pipes and specials including supply of all materials, labour, T&P etc. complete required for proper completion of work

200 KL, 20 m staging near UJN Office (U-6)

450 KL, 20 m staging at Jal Sansthan, Tikoniya (U-7) and at FTI (U-21)

650 KL, 20 m staging Behind Saras Market (U-17)

1050 KL, 20 m staging at Sheeshmahal (Upper) WTP (U-4)

Soil testing for bearing capacity, Design and Construction of RCC Clear Water Ground Level Service Reservoirs (GLSRs) of following capacities (In KL) with M.S. ladder outside the tank and aluminium ladder inside of the tank, M.S. M.H. cover with locking arrangement, lightning conductor as per electricity rules, water level indicator,supply and fixing of outlet, inlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover, ventilator column etc. complete with approved water proofing (apex) / enamal paint, testing, filling water for testing purpose etc. including supply of vertical pipes and specials including supply of all materials, labour, T&P etc. complete required for proper completion of work

45 KL at Nayi Basti Kathgodam (U-1)

600 KL at Sheetlahat WTP

1200 KL at Sheeshmahal (Upper) WTP

Soil testing for bearing capacity, Design and Construction of RCC Raw Water Sump (Open at Top and with Hopper Bottom) of following capacities (In KL) including supply and fixing of outlet, inlet, overflow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials), flooring 0.60 M wide apron, painting on tank body, vertical pipe, ladder with railing, 1.0 m wide Walkway at top along the outer periphery with railing on both sides railed with 3 rows of 20 mm dia G.I. (M) pipe on 65x65x5 mm angle iron posts fixed on the walkway along with proper arrangements for scraping etc. complete with approved water proofing (apex) / enamal paint, testing, filling water for testing purpose etc. including supply of vertical pipes and specials and necessary desilting arrangements including supply of all materials, labour, T&P etc. complete required for proper completion of work

150 KL at Sheetlahat WTP for newly proposed 7 MLD WTP

200 KL at Sheeshmahal (Lower / Upper) WTP for existing 7.5 MLD WTP

300 KL at Sheeshmahal (Lower / Upper) WTP for newly proposed 12.5 MLD WTP

350 KL at Sheeshmahal (Lower / Upper) WTP for existing 15 MLD WTP

550 KL at Sheeshmahal (Upper) WTP for newly proposed 26 MLD WTP

Soil testing for bearing capacity, Design and Construction of RCC Sump cum Pump Houses of following capacities (In KL) along with 4 m high Pump House in brick work masonry 1:6 over the sump including supply and fixing of steel ladder inside and outside, with approved water proofing (apex) / enamal paint, testing, filling water for testing purpose etc. of vertical pipes and specials including supply of all materials, labour, T&P etc. complete required for proper completion of work as per directions of Engineer-in-charge.

55 KL at FTI (U-21)

65 KL at Dhobighat, Uttar Ujala (U-22)

75 KL at Rajpura (U-14), Tehsil (U-15), Heera Nagar (U-18) & 13 Bigha Indra Nagar (U-23)

80 KL at GGHS, Indra Nagar (U-20)

100 KL at Rampur Rorad (U-19)

120 KL at UJS Tikonya (U-9 & U-10)

150 KL behind Saras Market (U-16 & U-17)

Supply and fixing of electronic type Chlorine dosing system at different CWRs complete with solenoid coil actuated pulsar circuit, diaphragm & electronically pulp capable of delivery max, 4 LPH at 5.5 kg /cm2 pressure operated 220 Volt single phase A.C. Supply along with chemical injection device and 100 Ltrs capacity of media tank complete with accessories including supply of all materials, labour, T&P etc. complete required for proper completion of work.

Schedule-5 : Building Works

Design and Construction of Pump Houses (RCC framed structure) of following size including supply of all materials, labour, T&P etc. complete required for proper completion of work as per directions of Engineer-in-charge.

12.0 M x 6.0 M x 7.0 M at Khandelwal Park

6.0 M x 5.0 M x 7.0 M at Sheeshmahal (Upper) WTP

Design and Construction of Staff Quarter (Type I) (RCC framed structure) for Operators and Chaukidar of covered area 43 sqm at Sheetlahat WTP, Sheeshmahal (Upper) WTP and near UJN Office, including sanitary, water supply, electrification, etc, works, including supply of all materials, labour, T&P etc. complete required for proper completion of work as per directions of Engineer-in-charge.

Design and Construction of Water Works Office Buildings (RCC framed structure) at following locations including sanitary, water supply, electrification, etc. works, including supply of all materials, labour, T&P etc. complete required for proper completion of work as per directions of Engineer-in-charge.:-

At Jal Sansthan Campus,Tikoniya (Plinth area 256 sqm)

Near EE, UJN Office (Plinth area 256 sqm)

Schedule-6 : Miscellaneous Works

Design and Construction of Boundary wall at different WTPs / Staff Quarters / Reservoirs locations, consisting of brick masonary, PCC, RCC Columns and Beams, RCC band at plinth level and on the top of wall including excavation with a minimum height of 2.0 meter above ground level along with 0.50 meter barbed wire fencing (coil shaped) on the top of the wall with Y- shaped M.S. angle iron 50x50x6, painting with Acrylic Smooth exterior paint including supply of all materials, labour, T&P etc. complete required for proper completion of the work as per directions of Engineer-in-charge.

Supply and fixing of Iron Gates, of size 3.6 m wide, with sliding and locking arrangements (minimum weight of each gate is 150 kg) along with Pillars, including supply of all materials, labour, T&P etc. complete required for proper completion of the work as per directions of Engineer-in-charge.

Repairing and Painting work on Existing Structures

Removing white or colour wash by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. - Cement mortar 1:6 (1 cement :6 coarse sand)

12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand).

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture.

Renewing of Glass panes, with putty and nails wherever necessary including racking out the old putty. Float glass panes of nominal thickness 4mm(weight not less than 10kg/sqm)

Dismantling of existing road pavement of following types for laying different sizes of pipes, stacking the serviceable materials and disposal of waste materials upto a distance of 30 m including supply of materials, labour, T&P etc. complete

Bituminous road

CC Road

Construction of following road pavement (which was dismantled during execution of works) after laying of different sizes of pipes and disposal of debris if any upto a distance of 60 m including supply of all materials labour, T&P etc. complete

C.C. Road in M25 grade concrete

Installation of Product Pipe by Auger Boring method including making of entry and exit pits, all related civil works like excavation, shoring/ strutting, etc., shielded excavation through auger boring process, lowering of pipe segments in the jacking pit, laying and jointing of product pipeline through jacking process from the jacking pit and after project completion as per the instructions of the Engineer-in-charge all complete except the cost of the pipe. (upto 80 meter installation length) (In all type of Soil) For Railway or any other Crossing

Upto 300 mm dia

For 450 mm dia

Interlocking Concrete Block Pavement

Taking out existing CC interlocking paver blocks from footpath / central verge, including removal of rubbish etc. disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metres lead as per direction of Engineer-in-Charge.

Laying old cement concrete interlocking paver blocks of any design / shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-Charge. (Minimum quantity of old concrete blocks shall not be less than 50% of total taken out / dismantled)

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved sice, design and shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse snad, filling the joints with line sand etc. all complete as per the direction of Engineer-in-Charge. (Maximum quantity of new concrete blocks shall not be greater than 50% of total taken out / dismantled)

Protection Works

Earth work in excavation in foundation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All kinds of soil.

Ordinary rock

Providing and laying in postion cement concrete 1:4:8 (1 cement : 4 coarse sand (zone- III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) excluding the cost of centering and shuttering

Providing and laying in postion cement concrete 1:2:4 (1 cement : 2 coarse sand (zone- III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering

Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction

Providing and laying in postion reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone- III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering

Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete (Thermo-Mechanically Treated bars of grade Fe-500D or more)

Drainage System at different sites

Constructing brick masonry Manhole in cement mortar 1:4 (1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 250 mm dia. R.C.C. pipe

Supply of all materials and construct 150 mm Semi-circular drain in plain cement concrete 1:2:4 including supply of all materials labour, T&P etc. complete as per directions of Engineer-in-charge.

Schedule-7 : Electrical and Mechanical Works

Intake well to Sheetlahaat WTP

Pumping Plant (Vertical Turbine)

SITC of Vertical Turbine (V.T.) Pump Set for raw water/clear water with head sole plate, Motor Stool & TBH, strainer, Pump bowl of following duty- 3200 LPM discharge at 100 MTR. head, RPM-1450 (Syn) electric motor to be operated on 415 (+\-) 10% volts,3 phase,50 C\s AC supply with 5 mtrs. submersible cable.

Supply of Oil cooled fully Automatic ATS Star Delta starter as per specification for above pumping plant.

Control panel with one no. incoming & 2nos. Outgoing as per specification.

Power Wiring and Earthing Material

Main Piping and Valves as per specifications

Gauges with fitting (0-20 kg/cm²) -1 set

Supply of 7.5 ton capacity and 8 mt. lift chain pulley block with travelling trolly, Garder etc. complete

Tools

Supply of rubber resistance insulated sheets 2M x 1M x 25mm thick.

SITC of Servo Control Voltage Stabilizer 315KVA suitable for regulating incoming voltage 300 to 480Volt , outgoing voltage 415Volt with 315Amp. change over switch and 70sq.mm 3½Core copper cable, first filling of Transformer Oil and complete installation.

400 Amp TPN main switch

Installation and commissioning of pumping plant and accessories.

Testing of pump set

(i) At Work

(ii) At Site

Painting of above pumping plants with 2 coat of enamel paint.

Complete internal and external electrification of all Pump Houses, staf Quarters and campus with LED lightning.

Six month Trial Running Maintenance

DG Set for Gaula Barrage

Supply of 320 KVA 415 Volts ‘Silent’ DG Set Outdoor type & DG set comprising Alternator mounted on common base frame , complete with STD control pannel Fuel Tank Battery and leades , silencer- residential ,AVM pads first fill of lube oio, acoustic enclosure. complete in all respect with Control cables and AMF Panel/changeover as per site 1. Base Fame with AVM 2. Engine Control panel with Microprocessor based AMF Controller and MCCB/Isolator 3. Batteries terminals, cables and external charger

Supply and fixing of aluminum conductor armoured power cable size 3.5core x 240 sq.mm.

Suitable Change over 400 AMP 4 Pole

Supply and construction of maintenance free chemical Earth Pits for body and neutral. a) 2 Nos for Neural Earthing b) 2 Nos for Body Earthing c) 1 No. for Exhaust Stack lightning arrestor d) Copper earth strips – as per site e) GI earth Strips – as per site Tool Kits - 1 Set Acoustic Enclosure - 1 Set Silencers, bellows etc., (Exhaust System) with cladding as per norms. - 1 Lot Supply, laying and termination of control and power cables between DG sets and distribution panels - 1 Lot One set of Fan belts, Air filter, fuel filters & Oil filter for each DG set - 1 Set

Transformer and Accessories

315 KVA Transformers for Gaula Barrage as Per Specification and site requirement with manual Tap Changer H.T. Panel as per specification and site requirement - 1 No. 50sq. mm H.T. XLPE cable armoured from H.T. panel to 11/0.44KV Tranformer side including cable jointing material - 60 mtrs 11KV jointing kit complete (Indoor + Outdoor) for each nos. sub station - 1 Set Making of earth station for transformer, HT Panel including all material as per IE rules - 1 Job

240 mm2 3.5 core aluminium armoured cable Transformer to Main Switch

Fire Extenguisher (6 Kg)

Six month Trial Running Maintenance

CWR at WTP Sheeshmahal (Lower) to OHT Sheeshmahal (Lower) (U-3)

Pumping Plant (Centrifugal)

SITC of centrifugal pump set capable of delivering 1750LPM discharge ,60Mtr. complete with motor, base plate, coupling and coupling guards 2900 RPM

Supply of Oil cooled fully Automatic ATS Star Delta starter as per specification for above pumping plant.

Control panel with one no. incoming & 2nos. Outgoing as per specification.

Power wiring and earthing material as per specification and site requirement

Main piping and Valves

Supply of pressure gauge & compound gauge with control cook air line fitting requirement.

Tools

Fire Extenguisher (6 Kg)

Rubber Resistance Sheet 1Mt.x 2Mt x.025Mt.

315Amp TPN Switch fuse unit.

SITC of Servo Control Voltage Stabilizer 100KVA suitable for regulating incoming voltage 300 to 480Volt , outgoing voltage 415Volt with 125 Amp. change over switch and 25sq.mm 3½Core copper cable, first filling of Transformer Oil and complete installation.

Installation,commissioning & testing of pumping plant at site

Painting of above pumping plants with 2 coat of enamel paint.

185 mm2 3.5 core aluminium armoured cable Transformer to Main Switch

Testing of pump set

(i) At Work

(ii) At Site

H.O.T. Crane 5 Tonne capacity wit suitable size of girder with travelling trolley as per specification & site

Carting of 2 sets of pumping plant with all material i.e.pumps motors, starters panel, pipe and special valves etc, from deptt. store haldwani to site

DG Set for Sheeshmahal (Lower)

Supply of 200 KVA 415 Volts ‘Silent’ DG Set Outdoor type & DG set comprising Alternator mounted on common base frame , complete with STD control pannel Fuel Tank Battery and leades , silencer- residential, AVM pads first fill of lube oio, acoustic enclosure. complete in all respect with Control cables AMF Panel/changeover 1. Base Fame with AVM 2. Engine Control panel with Microprocessor based AMF Controller and MCCB/Isolator 3. Batteries terminals, cables and external charger

Supply and fixing of aluminum conductor armoured power cable size 3.5core x 185 sq.mm.

Suitable Change over 250 AMP 4 Pole

Supply and construction of maintenance free chemical Earth Pits for body and neutral. a) 2 Nos for Neural Earthing b) 2 Nos for Body Earthing c) 1 No. for Exhaust Stack lightning arrestor d) Copper earth strips – as per site e) GI earth Strips – as per site Tool Kits - 1 Set Acoustic Enclosure - 1 Set Silencers, bellows etc., (Exhaust System) with cladding as per norms - 1 Lot Supply, laying and termination of control and power cables between DG sets and distribution panels - 1 Lot One set of Fan belts, Air filter, fuel filters & Oil filter for each DG set - 1 Set

Complete internal and external electrification of all Pump Houses, staf Quarters and campus with LED lightning.

Six month Trial Running Maintenance

CWR at WTP Sheeshmahal (Lower) to OHT Hydel Gate (U-7)

Pumping Plant (Centrifugal)

Supply of centrifugal pump set capable of delivering 2400LPM discharge, 60Mtr. complete with motor, base plate, coupling and coupling guards 2900 RPM

Supply of Oil cooled fully Automatic ATS Star Delta starter as per specification for above pumping plant.

Control panel with one no. incoming & 2nos. Outgoing as per specification.

Power wiring and earthing material

Main piping and Valves

Supply of pressure gauge & compound gauge with control cook air line fitting requirement.

Tools

Fire Extenguisher (6 Kg)

Rubber Resistance Sheet 1Mt.x 2Mt x.025Mt.

SITC of Servo Control Voltage Stabilizer 125KVA suitable for regulating incoming voltage 300 to 480Volt , outgoing voltage 415Volt with 160 Amp. change over switch and 35sq.mm 3½Core copper cable, first filling of Transformer Oil and complete installation.

Installation,commissioning & testing of pumping plant at site

Painting of above pumping plants with 2 coat of enamel paint.

Testing of pump set

(i) At Work

(ii) At Site

Carting of 2 sets of pumping plant with all material i.e.pumps motors, starters panel, pipe and special valves etc, from deptt. store haldwani to site

CWR at WTP Sheeshmahal (Upper) to OHT Sheeshmahal (U-4) (Upper)

Pumping Plant (Centrifugal)

SITC of Supply of centrifugal pump set capable of delivering 2050 LPM discharge ,40Mtr. complete with motor, base plate, coupling and coupling guards 2900 RPM

Supply of Oil cooled fully Automatic ATS Star Delta starter as per specification for above pumping plant.

Control panel with one no. incoming & 2nos. Outgoing as per specification.

Power wiring and earthing material as per specification and site requirement

Main piping and Valves

Supply of pressure gauge & compound gauge with control cook air line fitting requirement.

Tools

Fire Extenguisher (6 Kg)

Rubber Resistance Sheet 1Mt.x 2Mt x.025Mt.

125 Amp TPN Switch fuse unit.

SITC of Servo Control Voltage Stabilizer 100KVA suitable for regulating incoming voltage 300 to 480Volt , outgoing voltage 415 Volt with 125 Amp. change over switch and 25 sq.mm 3½ Core copper cable, first filling of Transformer Oil and complete installation.

Installation,commissioning & testing of pumping plant at site

Painting of above pumping plants with 2 coat of enamel paint.

Testing of pump set

(i) At Work

(ii) At Site

H.O.T. Crane 5 Tonne capacity wit suitable size of girder with travelling trolley as per specification

Carting of 2 sets of pumping plant with all material i.e.pumps motors, starters panel, pipe and special valves etc, from deptt. store haldwani to site

DG Set for Sheeshmahal (Upper)

Supply of 58.5 KVA 415 Volts ‘Silent’ DG Set Outdoor type & DG set comprising Alternator mounted on common base frame , complete with STD control pannel Fuel Tank Battery and leades , silencer- residential, AVM pads first fill of lube oio, acoustic enclosure. complete in all respect with Control cables AMF Panel/Changeover 1. Base Fame with AVM 2. Engine Control panel with Microprocessor based AMF Controller and MCCB/Isolator 3. Batteries terminals, cables and external charger

Supply and fixing of aluminum conductor armoured power cable size 3.5core x 70 sq.mm.

Suitable Change over 100 AMP 4 Pole

Supply and construction of maintenance free chemical Earth Pits for body and neutral. a) 2 Nos for Neural Earthing b) 2 Nos for Body Earthing c) 1 No. for Exhaust Stack lightning arrestor d) Copper earth strips – as per site e) GI earth Strips – as per site Tool Kits - 1 Set Acoustic Enclosure - 1 Set Silencers, bellows etc., (Exhaust System) with cladding as per norms - 1 Set Supply, laying and termination of control and power cables between DG sets and distribution panels - 1 Lot One set of Fan belts, Air filter, fuel filters & Oil filter for each DG set 1 Set

Complete internal and external electrification of all Pump Houses, staf Quarters and campus with LED lightning.

Six month Trial Running Maintenance

CWR at Khandelwal Park to Awas vikas OHT(U-5)

Pumping Plant (Centrifugal)

SITC of centrifugal pump set capable of delivering 1250LPM discharge, 50Mtr. complete with motor, base plate, coupling and coupling guards 2900 RPM

Supply of Oil cooled fully Automatic ATS Star Delta starter as per specification for above pumping plant.

Control panel with one no. incoming & 2nos. Outgoing as per specification.

Power wiring and earthing material as per specification and site requirement

Main piping and Valves as per specification and site requirement

Supply of pressure gauge & compound gauge with control cook air line fitting requirement.

Tools - 1 Set

Fire Extenguisher (6 Kg) - 4 Nos.

Rubber Resistance Sheet 1Mt.x 2Mt x.025Mt.

315Amp TPN Switch fuse unit.

SITC of Servo Control Voltage Stabilizer 63KVA suitable for regulating incoming voltage 300 to 480Volt, outgoing voltage 415Volt with 100 Amp. change over switch and 16 sq.mm 3½Core copper cable, first filling of Transformer Oil and complete installation.

Installation,commissioning & testing of pumping plant at site

Painting of above pumping plants with 2 coat of enamel paint.

Testing of pump set

(i) At Work

(ii) At Site

H.O.T. Crane 2 Tonne capacity wit suitable size of girder with travelling trolley as per specification

Carting of 2 sets of pumping plant with all material i.e.pumps motors, starters panel, pipe and special valves etc, from deptt. store haldwani to site

Complete internal and external electrification of all Pump Houses, staf Quarters and campus with LED lightning.

Six month Trial Running Maintenance

CWR at Khandelwal Park to Jagdambanagar OHT(U-11)

Pumping Plant (Centrifugal)

SITC of centrifugal pump set capable of delivering 1050LPM discharge ,40Mtr. complete with motor, base plate, coupling and coupling guards 2900 RPM

Supply of Oil cooled fully Automatic ATS Star Delta starter as per specification for above pumping plant.

Control panel with one no. incoming & 2nos. Outgoing as per specification.

Power wiring and earthing material as per specification and site requirement

Main piping and Valves as per specification and site requirement

Supply of pressure gauge & compound gauge with control cook air line fitting requirement.

Tools

Fire Extenguisher (6 Kg)

Rubber Resistance Sheet 1Mt.x 2Mt x.025Mt.

SITC of Servo Control Voltage Stabilizer 63KVA suitable for regulating incoming voltage 300 to 480Volt , outgoing voltage 415Volt with 100Amp. change over switch and 16 sq.mm 3½Core copper cable, first filling of Transformer Oil and complete installation.

Installation,commissioning & testing of pumping plant at site

Painting of above pumping plants with 2 coat of enamel paint.

Testing of pump set

(i) At Work

(ii) At Site

Carting of 2 sets of pumping plant with all material i.e.pumps motors, starters panel, pipe and special valves etc, from deptt. store haldwani to site

CWR at Khandelwal Park to EE UJN Office OHT(U-6)

Pumping Plant (Centrifugal)

SITC of centrifugal pump set capable of delivering 300LPM discharge , 60Mtr. complete with motor, base plate, coupling and coupling guards 2900 RPM

Supply of Oil cooled fully Automatic ATS Star Delta starter as per specification for above pumping plant.

Control panel with one no. incoming & 2nos. Outgoing as per specification.

Power wiring and earthing material as per specification and site requirement

Main piping and Valves as per specification and site requirement

Supply of pressure gauge & compound gauge with control cook air line fitting requirement.

Rubber Resistance Sheet 1Mt.x 2Mt x.025Mt.

SITC of Servo Control Voltage Stabilizer 25KVA suitable for regulating incoming voltage 300 to 480Volt , outgoing voltage 415Volt with 63Amp. change over switch and 10 sq.mm 3½Core copper cable, first filling of Transformer Oil and complete installation.

Installation,commissioning & testing of pumping plant at site

Painting of above pumping plants with 2 coat of enamel paint.

Testing of pump set

(i) At Work

(ii) At Site

Carting of 2 sets of pumping plant with all material i.e.pumps motors, starters panel, pipe and special valves etc, from deptt. store haldwani to site

CWR at Khandelwal Park to Cantt area OHT(U-13)

Pumping Plant (Centrifugal)

SITC of centrifugal pump set capable of delivering 1050LPM discharge , 50Mtr. complete with motor, base plate, coupling and coupling guards 2900 RPM

Supply of Oil cooled fully Automatic ATS Star Delta starter as per specification for above pumping plant.

Control panel with one no. incoming & 2nos. Outgoing as per specification.

Power wiring and earthing material as per specification and site requirement

Main piping and Valves as per specification and site requirement

Supply of pressure gauge & compound gauge with control cook air line fitting requirement.

Rubber Resistance Sheet 1Mt.x 2Mt x.025Mt.

SITC of Servo Control Voltage Stabilizer 63KVA suitable for regulating incoming voltage 300 to 480Volt , outgoing voltage 415Volt with 100Amp. change over switch and 16sq.mm 3½Core copper cable, first filling of Transformer Oil and complete installation.

Installation,commissioning & testing of pumping plant at site

Painting of above pumping plants with 2 coat of enamel paint.

Testing of pump set

(i) At Work

(ii) At Site

Carting of 2 sets of pumping plant with all material i.e.pumps motors, starters panel, pipe and special valves etc, from deptt. store haldwani to site

CWR at Khandelwal Park to Mahila Degree College OHT(U-12)

Pumping Plant (Centrifugal)

SITC of centrifugal pump set capable of delivering 2950LPM discharge ,40Mtr. complete with motor, base plate, coupling and coupling guards 2900 RPM

Supply of Oil cooled fully Automatic ATS Star Delta starter as per specification for above pumping plant.

Control panel with one no. incoming & 2nos. Outgoing as per specification.

Power wiring and earthing material as per specification and site requirement

Main piping and Valves as per specification and site requirement

Supply of pressure gauge & compound gauge with control cook air line fitting requirement.

Tools

Fire Extenguisher (6 Kg)

Rubber Resistance Sheet 1Mt.x 2Mt x.025Mt.

315Amp TPN Switch fuse unit.

SITC of Servo Control Voltage Stabilizer 125 KVA suitable for regulating incoming voltage 300 to 480Volt , outgoing voltage 415Volt with 160 Amp. change over switch and 25 sq.mm 3½Core copper cable, first filling of Transformer Oil and complete installation.

Installation,commissioning & testing of pumping plant at site

Painting of above pumping plants with 2 coat of enamel paint.

Testing of pump set

(i) At Work

(ii) At Site

H.O.T. Crane 5 Tonne capacity with suitable size of girder with travelling trolley as per specification

Carting of 2 sets of pumping plant with all material i.e.pumps motors, starters panel, pipe and special valves etc, from deptt. store haldwani to site

Complete internal and external electrification of all Pump Houses, staf Quarters and campus with LED lightning.

Six month Trial Running Maintenance

CWR at Khandelwal Park to Subhash Nagar OHT (U-8)

Pumping Plant (Centrifugal)

SITC of centrifugal pump set capable of delivering 1700LPM discharge ,50Mtr. complete with motor, base plate, coupling and coupling guards 2900 RPM

Supply of Oil cooled fully Automatic ATS Star Delta starter as per specification for above pumping plant.

Control panel with one no. incoming & 2nos. Outgoing as per specification.

Power wiring and earthing material as per specification and site requirement

Main piping and Valves as per specification and site requirement

Supply of pressure gauge & compound gauge with control cook air line fitting requirement.

Tools

Fire Extenguisher (6 Kg)

Rubber Resistance Sheet 1Mt.x 2Mt x.025Mt.

160Amp TPN Switch fuse unit.

SITC of Servo Control Voltage Stabilizer 100KVA suitable for regulating incoming voltage 300 to 480Volt , outgoing voltage 415Volt with 125 Amp. change over switch and 25 sq.mm 3½Core copper cable, first filling of Transformer Oil and complete installation.

Installation,commissioning & testing of pumping plant at site

Painting of above pumping plants with 2 coat of enamel paint.

Testing of pump set

(i) At Work

(ii) At Site

Carting of 2 sets of pumping plant with all material i.e.pumps motors, starters panel, pipe and special valves etc, from deptt. store haldwani to site

DG Set for Khandelwal Park

Supply of 400KVA 415 Volts ‘Silent’ DG Set Outdoor type & DG set comprising Alternator mounted on common base frame , complete with STD control pannel Fuel Tank Battery and leades , silencer- residential ,AVM pads first fill of lube oio, acoustic enclosure. complete in all respect with Control cables 1. Base Fame with AVM 2. Engine Control panel with Microprocessor based AMF Controller and MCCB/Isolator 3. Batteries terminals, cables and external charger

Supply and fixing of aluminum conductor armoured power cable size 3.5core x 185sq.mm.

Suitable Change over 400 AMP 4 Pole

Supply and construction of maintenance free chemical Earth Pits for body and neutral. a) 2 Nos for Neural Earthing b) 2 Nos for Body Earthing c) 1 No. for Exhaust Stack lightning arrestor d) Copper earth strips – as per site e) GI earth Strips – as per site Tool Kits - 1 Set Acoustic Enclosure - 1 Set Silencers, bellows etc., (Exhaust System) with cladding as per norms - 1 Lot Supply, laying and termination of control and power cables between DG sets and distribution panels -1 Lot One set of Fan belts, Air filter, fuel filters & Oil filter for each DG set -1 Set

SITC of 400 KVA Transformers for Khandelwal Park as Per Specification and site requirement - 2 Nos. 1-H.T. Panel as per specification and site requirement - 1 No. 2-50sq. mm H.T. XLPE cable armoured from H.T. panel to 11/0.44KV 3-Tranformer side including cable jointing material - As per site 4-11KV jointing kit complete (Indoor + Outdoor) for each nos. sub station - 1 Set 5-Making of earth station for transformer, HT Panel including all material as per IE rules - 1 Job

185 mm2 3.5 core aluminium armourd cable Transformer to Main Switch -

Sump cum PH to UJS Tikonia (2) OHT (U-10), Sump Cum PH to OHT FTI (U-21)

Pumping Plant (Submersible)

SITC of Submersible pump and motor set: 700 LPM discharge at 40 MTR. head NEH with 5 mtrs. submersible cable.

Supply of Submersible pump and motor set: 700 LPM discharge at 40 MTR. head NEH with 5 mtrs. submersible cable (As spare)

Supply of Fully automatic ATS Type start delta Starter cum panel of 15 HP as per spacification and site Requirment.

Supply of Main piping and valves as per specification and site Requirment

Supply of of 10 sq.mm. 3 core Copper conductor P.V.C. insulated submersible cable

Supply of 40KVA automatic voltage regulator (compact) servo controlled stabilizer with accessories as per specification and site Requirment

Supply of chain pulley 5.0 tonne capacity with 4.5mt.lift .

Supply of Gauges as per specification

Supply of Earthing materials as per specification and site Requirment

Supply of Rubber Insulation sheet 1mt. x 2mt.x 0.025 mtr.

Supply of 100 Amp. TPN Main Switch

Six month Trial Running Maintenance

Automation

Providing, Supplying, Installation and Programming of "HMI, PLC, SCADA, SENSORS, ANALYZERS, INSTRUMENTATION and IOT based Automation System" - 1 Job MCS Software with unlimited Digital and Analog IO as specified; supporting 4G/5G GPRS communication, web based server & android app compatible. The SCADA software, as delivered shall operate with a fully developed control screens, database and a communication network for seamless real time of data communication. (Latest Technologies with - 1 No. HP/Compaq or equivalent master control station hardware i3 processor configuration and minimum 1TB HDD, 16GB RAM 52X DVD, 20'' LED screen, mouse and key board, wifi & bluetooth complete in all respect, as per latest Technologies - 1 No. Wireless communication system for Irtu capable to transfer data from remote sites to MCS/LMS. All accessories included with signal enhancer, antenna - 1 No.

Intelligent GSM/Web/PLC based Mini Remote Terminal Units/PLC with analog and digital parameters and features as specified mini T.W. and transmit data on GSM backbone. GSM based wireless Communication system capable to transfer and gather data from remote sites to master Control Stations (Voltage, Current, Power factor, Pumping running Hour etc.) with 6 Amp. Automatic Voltage stabilizer including high and low cut and isolation transformer including Erection, testing and commissioining and modification of starter with AC and DC relays and necessary wiring complete in all respect.

Level transmitter 0-10 meter ultrasonic

Electromagnetic Insertion type Flow Meters for line sizes 150mm

Cables: 4 Core 2.5 sq.mm.

PVC Conduit Pipe: 1”

Auto phase reversal unit 0-25H.P.

Erection, testing and commissioining and modification of starter with AC and DC relays and necessary wiring complete including installation of Mini RTU, Level Transmeter, Flow meter etc. complete in all respect.

Supply and fixing of Electronic type dosing system complete with solenoid coil actuated pulsar circuit, diaphragm & electronically pulp capable of delivery max, 4LPH at 5.5kg./cm2 pressure operated 220Volt single phase A.C. Supply along with chemical injection device and 100Ltrs capacity of media tank complete with accessories. Erection, testing and commissioining and modification of starter with AC and DC relays and necessary wiring complete in all respect.

Liquid Chlorine (50Kg Cane)

Chlorine Testing Kit

Tools and Spanners –

Installation, commissioning and Testing of all pumping plant & Accessoriees complete

Internal & External Electrification of pump house for Pump House

DG Set for Pump cum Sump Tikonia & FTI

Supply of 40 KVA 415 Volts ‘Silent’ DG Set Outdoor type & DG set comprising Alternator mounted on common base frame , complete with STD control pannel Fuel Tank Battery and leades , silencer- residential ,AVM pads first fill of lube oio, acoustic enclosure. complete in all respect with Control cables 1. Base Fame with AVM 2. Engine Control panel with Microprocessor based AMF Controller and MCCB/Isolator 3. Batteries terminals, cables and external charger

Supply and fixing of aluminum conductor armoured power cable size 3.5core x 35 sq.mm.

Suitable Change over 100 AMP 4 Pole

Supply and construction of maintenance free chemical Earth Pits for body and neutral. a) 2 Nos for Neural Earthing b) 2 Nos for Body Earthing c) 1 No. for Exhaust Stack lightning arrestor d) Copper earth strips – as per site e) GI earth Strips – as per site Tool Kits - 1 Set Acoustic Enclosure - 1 Set Silencers, bellows etc., (Exhaust System) with cladding as per norms - 1 Lots Supply, laying and termination of control and power cables between DG set and distribution panels - 1 Lots One set of Fan belts, Air filter, fuel filters & Oil filter for each DG set - 1 Set

35 mm2 3.5 core aluminium armoured cable Transformer to Main Switch

Sump cum PH to UJS Tikonia (1) OHT (U-9), Sump Cum PH to Rajpura OHT (U-14), Sump cum PH to Tehsil OHT (U-15), Sump cum PH to Saras Market (U-16), Sump cum PH to Behind Saras Market OHT (U-17), Sump cum PH TO Heera Nagar OHT (U-18), Sump Cum PH toIndra Nagar OHT (U-20), Sump cum PH to Dhobi Ghat OHT (U-22) & Sump cum PH to 13 Bigha Indranagar OHT (U-23)

Pumping Plant (Submersible)

SITC of Submersible pump and motor set: 1100LPM discharge at 40 MTR. head NEH with 5 mtrs. submersible cable.

Supply of Submersible pump and motor set: 1100LPM discharge at 40 MTR. head NEH with 5 mtrs. submersible cable (As spare)

Supply of Fully automatic ATS Type start delta Starter cum panel of 25 HP as per spacification and site Requirment.

Supply of Main piping and valves as per specification and site Requirment

Supply of of 10 sq.mm. 3 core Copper conductor P.V.C. insulated submersible cable

Supply of 63KVA automatic voltage regulator (compact) servo controlled stabilizer with accessories as per specification and site Requirment

Supply of chain pulley 5.0 tonne capacity with 4.5mt.lift .

Supply of Gauges as per specification

Supply of Earthing materials as per specification and site Requirment

Supply of Rubber Insulation sheet 1mt. x 2mt.x 0.025 mtr.

Supply of 125 Amp. TPN Main Switch

Intelligent GSM/Web/PLC based Mini Remote Terminal Units/PLC with analog and digital parameters and features as specified mini T.W. and transmit data on GSM backbone. GSM based wireless Communication system capable to transfer and gather data from remote sites to master Control Stations (Voltage, Current, Power factor, Pumping running Hour etc.) with 6 Amp. Automatic Voltage stabilizer including high and low cut and isolation transformer including Erection, testing and commissioining and modification of starter with AC and DC relays and necessary wiring complete in all respect.

Level transmitter 0-10 meter ultrasonic

Electromagnetic Insertion type Flow Meters for line sizes 150mm

Cables: 4 Core 2.5 sq.mm.

PVC Conduit Pipe: 1”

Auto phase reversal unit 0-25H.P.

Erection, testing and commissioining and modification of starter with AC and DC relays and necessary wiring complete including installation of Mini RTU, Level Transmeter, Flow meter etc. complete in all respect.

Supply and fixing of Electronic type dosing system complete with solenoid coil actuated pulsar circuit, diaphragm & electronically pulp capable of delivery max, 4LPH at 5.5kg./cm2 pressure operated 220Volt single phase A.C. Supply along with chemical injection device and 100Ltrs capacity of media tank complete with accessories.

Liquid Chlorine (50Kg Cane)

Chlorine Testing Kit

Tools and Spanners –

Installation, commissioning and Testing of all pumping plant & Accessoriees complete

Internal & External Electrification of pump house for existing Tubewell

Six month Trial Running Maintenance

DG Set

Supply of 58.5 KVA 415 Volts ‘Silent’ DG Set Outdoor type & DG set comprising Alternator mounted on common base frame , complete with STD control pannel Fuel Tank Battery and leades , silencer- residential ,AVM pads first fill of lube oio, acoustic enclosure. complete in all respect with Control cables 1. Base Fame with AVM 2. Engine Control panel with Microprocessor based AMF Controller and MCCB/Isolator 3. Batteries terminals, cables and external charger

Supply and fixing of aluminum conductor armoured power cable size 3.5core x 50sq.mm.

Suitable Change over 100 AMP 4 Pole

Supply and construction of maintenance free chemical Earth Pits for body and neutral. a) 2 Nos for Neural Earthing b) 2 Nos for Body Earthing c) 1 No. for Exhaust Stack lightning arrestor d) Copper earth strips – as per site e) GI earth Strips – as per site Tool Kits - 1 set Acoustic Enclosure - 1 Set Silencers, bellows etc., (Exhaust System) with cladding as per norms - 1 Lots Supply, laying and termination of control and power cables between DG sets and distribution panels - 1 Lot One set of Fan belts, Air filter, fuel filters & Oil filter for each DG set - 1 Sets

50 mm2 3.5 core aluminium armoured cable Transformer to Main Switch

Sump cum PH to Rampur Road OHT (U-19)

Pumping Plant (Submersible)

SITC of Submersible pump and motor set: 1350LPM discharge at 40 MTR. head NEH with 5 mtrs. submersible cable.

Supply of Submersible pump and motor set: 1350LPM discharge at 40 MTR. head NEH with 5 mtrs. submersible cable (As Spare)

Supply of Fully automatic ATS Type start delta Starter cum panel of 25 HP as per spacification and site Requirment.

Supply of Main piping and valves as per specification and site Requirment

Supply of of 16 sq.mm. 3 core Copper conductor P.V.C. insulated submersible cable

Supply of 63KVA automatic voltage regulator (compact) servo controlled stabilizer with accessories as per specification and site Requirment

Supply of chain pulley 5.0 tonne capacity with 4.5mt.lift .

Supply of Gauges as per specification

Supply of Earthing materials as per specification and site Requirment

Supply of Rubber Insulation sheet 1mt. x 2mt.x 0.025 mtr.

Supply of 125 Amp. TPN Main Switch

Intelligent GSM/Web/PLC based Mini Remote Terminal Units/PLC with analog and digital parameters and features as specified mini T.W. and transmit data on GSM backbone. GSM based wireless Communication system capable to transfer and gather data from remote sites to master Control Stations (Voltage, Current, Power factor, Pumping running Hour etc.) with 6 Amp. Automatic Voltage stabilizer including high and low cut and isolation transformer including Erection, testing and commissioining and modification of starter with AC and DC relays and necessary wiring complete in all respect.

Level transmitter 0-10 meter ultrasonic

Electromagnetic Insertion type Flow Meters for line sizes 150mm

Cables: 4 Core 2.5 sq.mm.

PVC Conduit Pipe: 1”

Auto phase reversal unit 0-25H.P.

Erection, testing and commissioining and modification of starter with AC and DC relays and necessary wiring complete including installation of Mini RTU, Level Transmeter, Flow meter etc. complete in all respect.

Supply and fixing of Electronic type dosing system complete with solenoid coil actuated pulsar circuit, diaphragm & electronically pulp capable of delivery max, 4LPH at 5.5kg./cm2 pressure operated 220Volt single phase A.C. Supply along with chemical injection device and 100Ltrs capacity of media tank complete with accessories.

Liquid Chlorine (50Kg Cane)

Tools and Spanners –

Installation, commissioning and Testing of all pumping plant & Accessoriees complete

Internal & External Electrification of pump house for existing Tubewell

Six month Trial Running Maintenance

DG Set

Supply of 58.5 KVA 415 Volts ‘Silent’ DG Set Outdoor type & DG set comprising Alternator mounted on common base frame , complete with STD control pannel Fuel Tank Battery and leades , silencer- residential ,AVM pads first fill of lube oio, acoustic enclosure. complete in all respect with Control cables 1. Base Fame with AVM 2. Engine Control panel with Microprocessor based AMF Controller and MCCB/Isolator 3. Batteries terminals, cables and external charger

Supply and fixing of aluminum conductor armoured power cable size 3.5core x 50 sq.mm.

Suitable Change over 100 AMP 4 Pole

Supply and construction of maintenance free chemical Earth Pits for body and neutral. a) 2 Nos for Neural Earthing b) 2 Nos for Body Earthing c) 1 No. for Exhaust Stack lightning arrestor d) Copper earth strips – as per site e) GI earth Strips – as per site Tool Kits - 1 Set Acoustic Enclosure - 1 Set Silencers, bellows etc., (Exhaust System) with cladding as per norms - 1 Lot Supply, laying and termination of control and power cables between DG sets and distribution panels - 1 Lot One set of Fan belts, Air filter, fuel filters & Oil filter for each DG set - 1 Set

50 mm2 3.5 core aluminium armoured cable Transformer to Main Switch

R K ENGINEERS SALES LTD (BID ID -398523)

unipro techno infrastructure pvt ltd (BID ID -398530)

Bidder Name

unipro techno infrastructure pvt ltd