Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.6 LAccepted-AOC C 488 SC PLOT NO 10 EKTA NAGAR NEAR ANANT LEWIS PUBLIC SCHOOL BANAR ROAD NANDRI PO SARAN NAGAR JODHPUR 342015 RAJASTHAN | JODHPUR | JODHPUR | RAJASTHAN | 342015 | L1 | Accepted-AOC Accepting being L1 | |
| 2 | L2₹32.2 L+₹47,587 (1.50%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹33.1 L+₹1.4 L (4.41%)Rejected-Finance H NO 107 A RAJENDRA NAGAR DIGARI KALAN JODHPUR 342015 | JODHPUR | JODHPUR | RAJASTHAN | 342015 | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹33.4 L+₹1.6 L (5.17%)Rejected-Finance FIRST B ROAD SARDARPURA NEAR HANUMAN MANDIR JODHPUR 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L4 | Rejected-Finance NOT LOWEST | |
| 5 | L5₹34.4 L+₹2.6 L (8.21%)Rejected-Finance | L5 | Rejected-Finance NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹77,000
Closing Date
22 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY NO. 1 JODHPUR
GE ARMY NO. 1 ARMY AREA MULTAN LINES JODHPUR
ALTERATION AND ADDITION TO BLDG NO P 799 OF MES IB AND OTHER SANCTION TO WORKS UNDER GE ARMY NO 1 JODHPUR
2023_MES_635095_2
GE/JODH (A) NO 1- OF 2023-24 (9218/E8)
Open Tender
Civil Works
Item Rate
180 days
JODHPUR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
₹77,000
Yes
18 Mar 2024
13 Feb 2024
24 Feb 2024
13 Feb 2024
22 Feb 2024
15 Feb 2024
Amount
S&F in replacement 1000 ltrs capacity rotational moulded polythene water storage tanks white colour, three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms, including dismantling of old U/S PVC/RCC water tank & removing to store or outside MD land or credit to contractor, complete all as specified and as directed.
Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.
All as per item No 2.00 here-in-above, but size of pipe 20 mm bore.
Supply, laying, testing & commissioning of 20 mm outer dia CPVC pipe,SDR-11, with all fitting (eblow, socket,tee with internal thread of brass) fixed to wall, ceiling or laid on floor, with CPVC solvent, complete all as specified and directed.
All as per item No 4.00 here-in-above, but size of pipe 25 mm outer dire.
Taking down carefully cement conc /spalled out concrete from RCC roof projections, cilinigs ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc., and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.
M&L for cleaning the existing reinf of slabs , chajjas etc & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface.,complete all as specified and as directed.
M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack.,complete all as specified and as directed.
M&L for 15 -20 mm thick rendering in CM (1:1:2) using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat. ,complete all as specified and as directed.
M&L for 10-15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & smooth complete all as directed at site ,complete all as specified and as directed.
S&F GI chicken wire mesh of 0.71 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC chajjas/fascias etc,complete all as specified and as directed.
Taking down cement plaster any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified and as directed.
M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished surface even and smooth without using extra cement, complete all as specified and as directed.
M&L 15 mm thick rendering in cement mortar 1:4 on fair faces of stone or brick work or concrete surfaces mixed with water proofing compound as per manufacturer instructions and finished the surfaces even and smooth with out using extra cement complete all as specified and as directed. Note :- WPC will be measured and paid seperately.
M&L 10 mm thick rendering in cement mortar 1:3 on fair faces of stone on concrete surfaces of ceiling mixed with water proofing compound as per manufacturer instructions and finished the surfaces even and smooth with out using extra cement complete all as specified and as directed. Note :- WPC will be measured and paid seperately.
Complete removal of existing treatment from walls /ceiling, complete all as per specified & directed.
M&L for preparation of new plastered or unplastered surfaces of wall surfaces and applying with 2 mm thick wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed.
M&L for Preparation new plastered or unplastered surfaces or old decorated surface of wall and applying two coats of plastic emulsion paint on walls/ceiling complete all as specified and as directed. .
M&L for preparing new plastered or unplastered surfaces or old decorated surface of wall and applying two coats of exterior weather coat over & including one coat of primer on walls complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete
M&L for Granite slab 18 to 20mm thick machine cut, factory polished, Jet Black colour, as in cooking plateform/oval type WHB Counter & similar, bedded and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the shade of granite stone over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 complete all as specified and directed.
M&L for joint free non skid ceramic coloured tiles (premium quality) of size 6 to 7 mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.
All as per item No. 23.00 here-in-above, but size area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm
M&L for dark shade/double charged vitrified ceramic tiles, 10 mm thick (square/ rectagular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, (size & shape, shade and pattern as approved by GE), as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles, over & including M&L 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
All as per item No. 25.00 here-in-above, but as in skirting with 10 mm thick backing coat in cement motar CM 1:3.
M&L for providing and laying 10 mm thick pre finished wooden flooring, dado and skirting consisting of panel size 1200 mm x 200 mm or as per manufacturer specification having class of use, wear resistance with a high pressure surface treated with alumiinum oxide and specially patented surface guard on top of a high density fibre board. The panels having a click system tongue and groove joints to secure a long lasting joint with the edes duly impregnated with parffin. The floating laminate flooring shall be laid over a .20 mm thick polythene film to form a vapor barrrier and 2-3 mm thick approved foam the panels used shall be of high solidity, high impact strenght, high temp resistance with out change in shape. Each panel shall have click system and to be laid in approved pattern with suitable glue as per manufacturer specifictions including alround suitable egde profile alround / where required for firm end locking
S&F 12mm thick plain gypsum board false ceiling with GI frame work including all necessary drilling, cutting to fix electical items complete all as specified and directed with followings:-(a) GI sheet channel 30x25x20mm of 24 Gauge fixed with rawl plug and screws 450mm centre to centre along with perimeter of walls. (b) GI sheet channel made to shape 50x40x40mm of 24 guage placed @ 600mm centre to centre from perimeter of wall except long wall (in one span) (d) GI sheet 25mm wide & 20mm gauge suspenders fixed with steel fasteners to roof, ceiling @ 1200 mm centre to centre incl plugging in RCC slab and 75-100 mm wide POP moulded cornices, moulding fixed on ceiling/wall joints complete all as specified and directed.
M&L Plain cement concrete 1:3:6 type C-2 by using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed .
M&L Sand stone slabs, 5 cm thick, Jodhpur pattern/colour in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc not exceeding 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 complete all as specified and as directed.
M&L for joint free glazed colour ceramic tiles (premium quality) of size 250X450X6-7mm / 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including M&L 10mm thick backing coat in CM (1:3) complete all as specified and directed.
S&F in replacement bib cock (Brand-I) with wall flange, chromium plated brass, fancy type, 15mm dia complete all as specified and as directed.
S&F in replacement angular stop cock (Brand-I) with wall flange, chromium plated brass, fancy type, 15mm dia complete all as specified and as directed.
S&F in replacement Hand Shower (Health Faucet) (Brand-I) with 80 mm Dia, 1.2 Meter Long SS Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer) , 15mm dia complete all as specified and as directed.
S&F in replacement two way angle cock (Brand-I) with wall flange, chromium plated brass, fancy type 15mm dia complete all as specified and as directed.
S&F in replacement Central Hole Basin Mixer with Popup Waste System with 450mm Long Braided Hoses, chromium plated brass, fancy type 15mm dia complete all as specified and as directed.
S&F in replacement Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange, chromium plated brass, fancy type 15mm dia complete all as specified and as directed.
S&F in replacement Overhead Shower 150X150mm Squarel Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System with wall flange, 15mm dia complete all as specified and as directed.
S & F vitreous china ware wash hand basin, white, flat back of size 550 mm X 400 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 450mm long, complete all as specified and as directed.
S&F in replacement Rimless Single Piece EWC (Brand-I) Size: 395x710x730 mm, with UF Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set,etc complete, S Trap- 300 mm, complete all as specified and as directed.
S&F in repair corner sheet glass of 6mm thick superior quality, As per sample, 300mm size,as in shelf, CP tubular framing fancy type, triangular in shape and one side circular complete all as specified and directed.
S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D Type, 600 mm long between flanges including brackets complete all as specified and as directed.
S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement for 75 mm bore pipes , complete all as specified and directed.
S&F in replacement 75mm dia PVC (SWR) pipes single socketed, in any length with or without ears with cement joints, laid in trenches or in floors and including old u/s demolation drain/PVC/CI pipe ,complete all as specified and as directed
S&F in replacement 110mm bore PVC (SWR) pipes single socketed, in any length with or without ears with cement joints, laid in trenches or in floors and including old u/s demolation drain/PVC/CI pipe ,complete all as specified and as directed
S&F for 75mm PVC (SWR) bends (any radius), diminishing pieces or tapers (larger bore measured) ,complete all as specified and as directed
S&F in replacement 110mm bore PVC (SWR) bends (any radius), diminishing pieces or tapers (larger bore measured) ,complete all as specified and as directed
S&F in repairs 3.00/4.80 mm thick plain Sheet glass/ tinted or coloured film as required, ordinary quality and glazing withsecured in wooden beads or snap fit glazinng clips square exc 0.5 sq. m in each pane, complete all as specified and directed.
S&F in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire & avg width of appertuer 1.40 mm fixed to Anodised aliminium framework of windows / vents & door shutters etc ccomplete.
S&F 12 mm thick toughened glass as in door/window or partition complete including design etching work /sun control film as directed and all necessary stainless steel fittings arrangement like hinges, clips, handle etc, complete all as specified & directed by Engineer-in-charge.
S& F stainless steel body bottom floor spring machine screwed suitable for glass door complete all as specified and as directed
Taking down shutter of any description area exc 1 Sqm but n. exc 2 Sqm each , refixing in same, complete all as specified and directed.
Taking down shutter of any description area exc 1 Sqm but n. exc 2 Sqm each , complete all as specified and directed.
M&L factory Made flush shutters, 35 mm thick solid core with block board core construction as per IS 2202(part-I, 1999), both side commercial type. The stiles & rails shall be with out any joint and made with non- coniferous timber hard wood (Hillock/ Mirantee/ Bosum/ Benteak) with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process. The over all finished thickness of face panel shall not be less than 35mm while the thickness face veneer shall not be less than 0.6 mm complete all as specified and directed.
M&L 35mm thick factory made 2nd class HW glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and as directed.
S&F 200mm long aluminium anodised tower bolt, complete all as specified and as directed.
S&F 150mm long aluminium anodised handle extruded section, complete all as specified and as directed.
S&F of aluminium alloy anodised sliding door bolt with hasp and staple bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long, complete all as specified and as directed.
S & F of mild steel butt hinges 100 mm size complete all as specified and directed.
M & L for preparation of old painted wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified and as directed .
All as per item No. 61.00 here-in-above, but steel surfaces.
M&L FOR Preparation of new or previously untreated steel surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer complete all as specified and as directed.
S&F wall mounted panel shower with (Brand-I) 3 adjustable vertical jets (Square), Stainless steel structure, Moveable ABS top shower, Thermostatic mixer with diverter Hand shower with flexible hose, Button spout Minimum water pressure required 2 bar, complete all as specified and directed.
S&F 5-8 mm thick colour PVC insulation sheet in strips & channel feathered at the edges for fixing , Insulated/solid PVC wall lining inclusive of solvent cement and fixing at site including necessary frame work all as directed by Engr in charge.
M&L 75 mm thick PCC 1:4:8 type D-2 using 20mm graded crushed stone aggregate, as in sub base of floor incld. compaction properly & universal and laid to level, complete all as specified and directed.
Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any description, ( colour, design & pattern, & size/ shape, as approved by GE) as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.
M&L for neat cement slurry @ 3.00 kg/Sqm and screeding / bedding layer of 10 mm thick in CM 1:3 mixed with water proofing compound as per manufacturer instructions over the RCC roof slab for laying of water proofing treatment including providing the following as roof treatment complete all as specified and as directed : - (a) FIRST COURSE: Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastered surfaces. (b) SECOND COURSE: Applying one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm (c) THIRD COURSE : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 3.00mm having weight not less than 3.00 Kg/Sqm, mineral gravel finish on top, using torch application method with minimum 10cm side lap and 15cm end lap complete . (d) FOURTH COURSE : Applying one coat of bonding material using blown type bitumen conforming to IS- 702 grade 85/25 @ 1.20 Kg/Sqm. (e) FIFTH COURSE : 40 mm thick plain cement concrete 1:2:4 (using 20 mm stone crushed aggregate) as in roof padding, well compacted with V -shaped groove 6 mm wide and 10 mm depth filled with mastic bitumen of (1:1) of proportion complete,size of PCC panel with grooves shall not be exceed 1.50 Sqm including WPC as per manufacturer instruction. NOTE :- 1. A Information Tablet will be put up in the front side wall of the buildings where this work will be done. All building/structure shall be provided with plaque (tablet) furnishing the information as per PS clause, in plaster engraving in and painted as directed by GE 2.WPC shall be measured and paid separately under respective item.
M&L for UPVC Caoted Celuka printed in one of two different colours( with wood grain printed pattern /ivory clour finish) polyvinyl chloride (PVC) sheet frame of width 150mm & 18mm thickness made out of extruded 18mm PVC sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3 Nos. of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc, all as per manufracturers specifications, complete all as specified and as directed.
M&L for 18 mm thick solid PVC sheet UPVC Caoted Celuka printed in one of two different colours( with wood grain printed pattern /ivory clour finish) as in kitchen cabinet shutters ,all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc complete all as specified & directed .
S&F '0' degree clip type self closing hinges for cabinets fized with cadimum coated screws all as per sample
S&F drawer runners folding type with guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawers.
M&L for stainless steel tray as per trade pattern of various sizes for drawer to keep the kitchen utensil as directed by Engineer-in-charge
M & L providing 35-40 mm thick pre-cast cement concrete 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in louvers & jallies (measured solid) including all mouldings and including pre-cast frames set in cement mortar 1:6 complete all as specified and as directed.
M & L providing precast concrete Posts 150x150mm size & 75-100 cm height 1:2:4 type B0 using 12.50 mm graded stone aggregate as in RCC jali post setting in mortar 1:6 complete
Supply and laying machine / factory made kerb stone of M-25 grade,at or near ground level, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.
M&L 50 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight in 2 mtr interval, complete all as specified and directed.
Demolition of brick / block or stone / boulder masonry walling built in cement mortar including all quoins arches pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and as directed.
Cutting into old stone masonry for iForming jambs etc to openings with including cutting, toothing and properly bonding in to old work including facing and pointing [if necessary] to match existing work, complete built in Cement Mortar 1:4 complete all as specified and directed.
M&L for squared rubble walling, Jodhpur type, regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and directed.
All as per item No. 80.00 here-in-above, but except stone
Extra over stone walling for hammer dressing to face stone & dressing of face beds & joints as specified of squared rubble walling Jodhpur type brought upto courses with maximum depression of face from straight edge held against the dressed surface n exc 20mm and dressing face beds and joints, complete all as specified and directed.
M&L precast cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in solid block masonry 10cm thick and setting in cement mortar 1:4 complete all as specified & directed by Engineer-in-charge.
M&L for 25 mm thick cement concrete 1:2:4, type B-0 (using 12.50 mm graded crushed stone aggregate), as in base course, to receive floor finishes, complete all as specified & directed.
All as per item No. 23.00 here-in-above, but size area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm
All as per item No. 85.00 here-in-above, but as in skirting over & including M&L 10 mm thick rendering in CM 1:4 complete all as directed.
M&L for machine cut kota stone slab 20 to 25mm thick in floor laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick screed bed in CM 1:4 including dismantling of stone slabs of any description complete all as specified and as directed.
All as per item No. 87.00 here-in-above, but as in skirting/dado with 20mm thick backing coat in CM 1:3
M&L for 5 mm thick rendering in CM 1:3 & finishing the surface even & smooth w/o using extra cement ,complete all as specified and as directed.
Racking out joints/ pointing to squared rubble or polygonal rubble un-coursed or brought up to courses masonry built in cement mortar or cement lime mortar, coursed or un-coursed in walls not less than 12mm deep, washing the joints, removing rubbish off the premises and keeping the surface to pointed or plastered wet for two days prior to re-pointing or plastering complete all as specified & directed
M&L keyed pointing in cement mortar (1:3) to squared rubble masonry regular coursed or un coursed complete all as specified & directed.
M&L for applying 2 mm thick wall care putty on wall surfaces including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper paint on wall surfaces as per manufacturer’s instruction, complete all as specified and directed. Note -i)- Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures. ii)- Paint shall be in one or more colours/ shades all as approved by GE.
M&L for Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and as directed.
M&L for preparation of old decorated wall surfaces plastered or unplastered, by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, including cornices etc and applying one coat of white wash on wall, complete all as specified and directed.
All as per item No. 94.00 here-in-above, but as on ceiling
M&L preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint over a coat of white cement as primer, complete all as
M&L for preparation of old decorated wall surfaces plastered or unplastered, by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, including cornices etc and applying one coat of cement base paint on wall, complete all as specified and directed.
S&F in replacement Concealed Stop Cock with all Fitting Sleeve, Operating Lever & Adjustable Wall Flange, 15mm dia complete all as specified and as directed.
S&F brass chrome plated soap dish with holder fancy type complete all as specified and as directed.
S & F in repairs toilet paper holder chromimum plated fancy type complete all as specified and as directed.
S&F in replacement decorative type curtain rod stainless steel finish of pipe 22 to 25mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end, complete all as specified and as directed.
S&F in repair MS chromium plated peg set of five fixing with wall complete all as specified and directed.
S & F sand cast, cast iron, soil / waste / vent pipes, 100mm bore, in any length with or without ears, jointed with cement sand mortar, laid in trenches or in floors complete all as specified and as directed.
All as per item No. 103.00 here-in-above, but 75 mm bore pipe
All as per item No. 103.00 here-in-above, but fixed to wall with MS clamps
All as per item No. 105.00 here-in-above, but 75 mm bore pipe
S& F 100 mm bore cast iron branch piece, single (single Y) equal or unequal with access door complete all as specified and as directed.
All as per item No. 107.00 here-in-above, but 75 mm bore pipe
S&F100mm CI bends any radius complete all as specified and directed
S&F 75 mm dia CI bend with oval acess door fixed to pipe complete all as specified and directed.
S&F 100mm dia CI vent cowl fixed to pipe complete all as specified and directed.
S&F 100mm dia CI floor trap plain grating including jointing with solvent cement, complete all as specified and as directed.
S&F in repairs Pillar taps, fancy type Cast copper alloy, with capstan heads chromium plated, screwed down high pressure, with or without lettered 'Hot" or Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and as directed.
S&F in repair stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends suitable for 25 mm bore iron pipe or for unions complete all as specified and as directed.
S&F in replacement 500 ltrs capacity rotational moulded polythene water storage tanks white colour, three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms, including dismantling of old U/S PVC/RCC water tank & removing to store or outside MD land or credit to contractor, complete all as specified and as directed.
M & L for mild steel framed work as in brackets etc., for cooler stands /steps/stairs etc., supporting frame work to sunshade, with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel'), complete all as specified and as directed.
M&L TMT steel bars of 8mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.
S&F of water GI tubing medium grade, galvanized, with all fittings fixed to wall, ceilings or laid n floors, complete all as specified and as directed. (a) 25 mm bore,
All as per item No 118.00 here-in-above, but size of pipe 20 mm bore.
All as per item No 118.00 here-in-above, but size of pipe 15 mm bore including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc., complete all as specified and as directed.
Demolition of cement concrete as removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE including taking down existing plaster, padding,cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc . flushing at junction of parapets complete and removing RUBBISH OUT TO A DISTANCE 1.0 KM BUT NOT EXC. 2.5 KM the same to the places where as directed.
M&L for plain cement concrete 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregate), as in roof padding over roof for making good depression / undulation to make the existing as filling in depression of roof slab, complete all as specified & directed.
M&L plain cement concrete (1:2:4) type B-1using 20mm graded crushed stone aggregate as in roof kerbs, coping or mud steps, weathering, rounded or chamfered on edge, fixing of holdfast etc complete all as specified & directed
Supply only integral water proofing compound (ISI marked).
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out any type of soil all as specified and directed.
Returning filling in and well ramming in layers n. exc. 25cm including spreading, leveling and watering all as specified and directed.
Removing excavated material (soil/rock) and depositing at a distance not exceeding 50m where directed.
M&L PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in foundation , filling, sub base and mass concerete complete all as specified and as directed.
M&L for rolled mild steel confirming Fe-290 (Gde E-165) in door or gates of angle (35x35x5 mm) or other section with gusset plate, rail braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (inclding of steel, sheeting or other covering ) and hanging also fastening and fixing complete all as specified and as directed.Supply only integral water proofing compound (ISI marked).
Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.
M&L for modular point wiring complete with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FR-LSH cable (RYBN) 1100 volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit with wall thickness not less than 1.8 mm including conduit accessories like bends, tees junction boxes, etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sq mm, single core, PVC insulated but unsheathed multi stranded copper conductor FR-LSH cable (Green) 1100 Volts grade as earth continuity wire connected to earth dolly and including modular sunken galvanized terminal boxes of same make of switch/ socket/ regulator with sleek and curvy cover plates, for mounting of modular switches, sockets, fan regulators, suitable for one light point controlled by one, one way switch, complete all as per specified and directed.
All as per srl item no.131.00 here-in-above but suitable for one socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch.
All as per srl item no.131.00 here-in-above but suitable for one socket outlet 3 pin 5 amps on the independent board controlled by one no 5 Amp switch.
All as per srl item no.131.00 here-in-above but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point.
All as per srl item no.131.00 here-in-above but with 4 sq mm FRLS copper wire with 4 Sqmm FRLS copper earth wire for indpendent 15 Amp point.
S&F Modular switch single pole one way 6 Amp ISI Marked, complete all as per specified and directed.
S&F Modular switch single pole one way 16 Amp ISI Marked, complete all as per specified and directed.
S&F Modular socket outlet 2 in 1, 5 pin, 6 Amp, 230 Volts , complete all as per specified and directed.
S&F Modular socket outlet 2 in 1, 6 pin, 5 and 16 amp , 230 Volts ISI Marked, complete all as per specified and directed.
S&F Modular BELL PUSH single pole one way 6 Amp ISI Marked, complete all as per specified and directed.
S&F modular type call bell multi music tune single pole one way 5/6 Amp ISI Marked, complete all as specified and directed.
S&F moduler Lamp holder, metal cased, bakelite body, 230 volts, including LED Warm White Bulb 9W, complete all as specified and directed.
S&F modular blank plate 1 module complete all as specified and directed by the Engineer-in-Charge.
S&F Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing Warm White LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including AC decorative box type with driver, holder including,copper conductor cable of suitable size from ceiling rose complete complete, 4 ft long all as specified and directed by the Engineer-in-Charge.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, including taking down old unsv light, complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing 2 watt 220 volts LED wall light (bed light) for reading suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size including taking down old unsv light, complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size including taking down old unsv light, complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing in replacement LED spot light 6 watt black/white body, FOCUS LIGHT, WARM WHITE, 220 volts AC csuitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size including taking down old unsv light, complete all as specified and directed by the Engineer-in-Charge.
S&F MCB, B Curve type, 10 kA, 40 Amp to 63 Amp, SPN with over load and short circuit protection, complete all as directed and directed by the Engineer-in-Charge.
S&F MCB, B Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection, complete all as specif and directed by the Engineer-in-Charge.
Supply and fixing as MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed by the Engr-in-Charge.
S & F in replacement decorative type ceiling fan 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE 5 star rating, brushless direct current motor (BLDC), suitable for single Phase 230 volts and connected with twin core twisted flexible copper conductor cable from ceiling rose to fitting complete all as specified and as directed. .
S&F wall mounted fan 3 blade 400 mm (16 inch) 49No. With remote, sweep with speed control regulator position, silent operation 5 star rating, complete all as speciifed and directed.
S&F in replacement air circulator fans 230 V single phase oscillating 400 mm sweep suitable for wall mounting, complete all as directed and as specified.
M&L for sub main wiring with 2 run of 4 Sqmm FRLSH, PVC insulated, unsheathed and stranded copper conductor cable with and incl 4 Sqmm (nominal area) FRLSH, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 15 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note:- Two run of 4 Sq.mm. and one run of 4 Sq.mm (earth wire) cable incuding one run of conduit pipe will be measured as one length including making good the disturbed surfaces.
M&L for sub main wiring with 2 run of 6 Sqmm FRLSH, PVC insulated, unsheathed and stranded copper conductor cable with and incl 6 Sqmm (nominal area) FRLSH, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 20 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note:- Two run of 6 Sq.mm. and one run of 6 Sq.mm (earth wire) cable incuding one run of conduit pipe will be measured as one length including making good the disturbed surfaces.
Supply, installation, testing and commissioning of 1.5TR Split type Air-conditioner fitted with hermetically sealed rotary/reciprocating compressors operating on noise level for indoor unit less than 45db & outddor unit-less than 55 db, Refrigerant R-32/non CFC confirming to IS:1391 (Part-1)/92 (Amdn.1) suitable for operation on 230V, 50 Hz Single phase, A.C power supply capable of performing; Cooling, Dehumidifying, Air Circulating & Filtering(both Dust and Anti-Bacterial). EER : Shall be more than 5.2 (W/W), Air Filters : 90% efficiency, filtering down to 10 micron size, washable HDPE air filters, Star rating : latest BEE 5 STAR, Nominal cooling capacity: Not less than 4500 Kcal/hr (or)1.5 TR, complete all as specified and directed.
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type, 100% copper winding & designed for input variation between 140 V to 290 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and directed.
S&F table top vitreous china, wash hand basin of approved size including CP waste coupling, 2 Nos PVC connection 15 mm size & 45-60cm long & PVC waste coupling & CP bottle trap complete all as directed.
Supplying fixing and replacement of bldg security LED Light Luminate of 25 Watts having IP GS protection fiting made out of pressure dia cast. Aluminium housing, operating Voltage 140-270 Volts with in build surge protectore bracket as approved by GE including drilling holes, nuts and bolts & coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable complete all as directed.
NOTE:- (a)- Quantities are clubbed in BOQ for different Jobs. Details as per Annexure-I on Sl. Page No. 55 to 57 of tender document. (b)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount
JB INFRA
M/S SHARMA ASSOCIATES
Diva Infra
Pawan Kumar Shrama Contractor
M/S KAUTILYA GARG
VIKAS CONSTRUCTION CO.
Rajesh Enterprises
ABHOG INFRASTRUCTURE PRIVATE LIMITED
SN TECHNO CONSTRUCTIONS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .