WBSED/RE/DDUGJY/SS/19-20/NIT11

Amount

Control Room Wiring

Supply & fixing of ISI marked, miniature circuit Breaker 4 ways DB with 40 A Triple-pole with neutral Isolator and SP MCB 10A/16A for outgoing distribution in sheet steel enclosure with additional double acrylic cover including the bus bar, neutral bar & earth bar ( Maker's Name- Havelles/Siemen or equivalent )

Supply & fixing of 19 mm dia G.I conduit pipe ( 2 nos ) and ball socket type ceiling plate, suspended 950 mm below the ceiling for Fluoroscent tube light fittings.

Supply & fixing of 2 X 40 W fluorescent tube light fittings Philips make catalogue Model no- T8e-batten TMS150, 2 x TL-D/G-13/36Watt( with tube light)

Supply & fixing of 1 X 40 W fluorescent tubes light fittings Philips make catalogue TMC 501/136 H & F on wall ( with tube light)

Distribution wiring by supplying 1.1 KV gr. , 2X 4 sq.mm PVC insulated copper wire (casing & capping)( Pricision/ Plasto make) wiring by supply of relevant materials with eathing attachment by 1 sq.mm PVC insulated copper wire and connection from the ACDB to Battery Room ( Make Finolex/ Havelles)

Distribution wiring by supplying 1.1 KV gr. , 2X 2.5 sq.mm PVC insulated copper wire(casing & capping) ( Pricision/ Plasto make) wiring by supply of relevant materials with eathing attachment by 1 sq.mm PVC insulated copper wire and connection from the D.B to switch Board ( Make Finolex/ Havelles)

Distribution wiring by supplying 1.1 KV gr.2X 2.5 sq.mm PVC insulated copper wire casing & capping ( pricision or equivalent make) wiring by supply of relevant materials with eathing attachment by 1 sq.mm PVC insulated copper wire and connection for power plug point ( Make Finolex/ Havelles)

Distribution wiring by supplying 1.1 KV Gr. ,2X 1.5 sq.mm copper wire PVC insulated cassing & capping wiring by supply of relevant materials i.e. required size of PVC/ Wooden switch board, JB/ Piano type switch ( Anchor make ) ceiling perfex cover, etc with making the damaes good for light / fan etc. point.( Make Finolex/ Havelles or equivalent ).

a) Run upto 5 mtr.

b) Run upto 8 mtr.

c) Run upto 10 mtr.

d) Run upto 12 mtr.

Supply and fitting of 250 V , 5A, 3 pin plug socket & 5 A switch on switch Board with necessary connection.

Supply and fixing of electronics regulator (Anchor Made) on Switch board for ceiling fan

Supply, Laying & drawing of power cable , 1.1 KV Grade, 4-core, 16 sq.mm Aluminium PVC insulated armoured on wall/ surface on H.W. batten (including cutting floor if necessary & fitting the same with G.I pipe) including supply & fixing M.S shaddle with earthing attachment & mending the good damages including supply of various type of cable gland ,complete with brass gland, rubber rings for dust & moisture entry, etc

Supply & fixing of composite flush type 250 V 5 pin 15 A plug socket with 15 A Piano key type ( Anchor make ) switch including supply & fitting on PVC/ wooden Board ( 6 '' X 4'' )

Supply and fixing of decorative type wall / ceiling type luminaire for 2 x PL/ 36W lamp complete set, Philips make, catalogue lotus housing , with necessary connection.

Supply & fixing bracket approved make complete( Poly carbonate holder)

Supply and fixing of exhaust fan with connection, 220/250 V size 300 mm ( make - Havells / C.G)

Supply & fixing of exhaust Fan back cover ( 350 mm dia.) ( Bird guard)

Supply and fixing of ceiling fans 1200 mm sweep , 3 blade with necessary materials & connection(make - Havells / C.G ).

Supply and fixing of wall mounted fans , 3 blade with necessary materials & connection(make -Havells/ C.G ).

Supply of heavyduty pedestral fan (Stand Fan) (make -Havells/ C.G )

External Wiring & Yeard Lighting

Erection of PCC pole ( 08 mtr.) with concrete fundation (6:3:1, 600 X 600 X 2000 mm) with neet cement finish (As per enclosed DRG.)

Earthing complete

Supply and fixing of G.I Arm Bracket for flood light

a) Single Arm Bracket on existing HB Pole

b) Single Arm Bracket on existing PCC pole/CRB OW

c) Double Arm Bracket on existing PCC pole/CRB OW

d) Double Arm bracket on existing HB Pole

Supply and fixing of terminal Box ( 4 way) ( 8" X 6" X 5" by 16 SWG G.I) and 2 nos 3 phase power receptacles for PTR on the base of Rail pole/PCC pole/wall/Yard providing cut-out.

a) Supply and Laying of 16 sq.mm 4 core aluminium aurmour cable directly laid under ground after formation of cable treanch with brick protection on top and side of cable ( 12 nos /mtr) refilling the same( below 0.5 m from G.L).

b) Supply and laying of 16 sq.mm 4 core aluminium aurmour cable through cable trench by supplying and fixing of GI saddle.

c) Termination of above cable including supply and fixing of gland, aluminium luge etc.( standred quality)

Supply and fixing of GI pipe/PVC(Suprim) (3/4 '' dia.) with elbow Cap etc.for drawal of PVC cable for HB pole/ PCC pole/ CRB wall

Supply and drawal of PVC 2 core ,4 sq. mm coper wire through GI pipe (3/4 '' dia.) with necessary termination on HB pole/ PCC pole wall

Supply and fixing of outdoor LED flood light 100 watt philips/ Havells make complete with all accessories.

Supply and fixing of PVC pipe rigid/ flexible (required size) in pole mounting for entry and exit for U.G Cable.

Supply and laying of GI pipe 32 mm Dia across the main gate by cutting concrete road (if necessary) with mending the good damages.

Supply and fixing of gate light with SPC 101/70 (E) type philips make with 1 X 80 watt / 70 S gate by supplying 2 " dia. G.I pipe with mending all good damages.

Supply and fixing of wires net cover on the fixture of gate light

GST WILL BE PAID EXTRA AS APPLICABLE AGAINST AEACH ITEM

M/S TECHNO ELECTRICALS

TUSHAR NATH GHOSAL