Loading…
Loading…
Tender Value
₹20.6 L
EMD Value
₹21,000
Closing Date
19 Jun 2026, 5:00 pm
Executive Engineer, PRI Division, Vijayawada
Executive Engineer, PRI Division, ZP Compound, Opp. PWD grounds, MG Road,Vijayawada
Construction of Skill Development Centre in Kunaparajuparva Village of Reddigudem Mandal Est.Rs.25.00 lakhs
942805
NIT No.18/AEE1/2026-27, dt:27.05.2026 of the Executive Engineer, PRI Division, Vijayawada 3rd call
OPEN - NCB
Buildings
NTR
7 documents required · 7 mandatory
₹731
₹21,000
4 Jun 2026
4 Jun 2026
4 Jun 2026
Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.
Sand filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH. Overheads & Contractors Profit @13.615% etc.complete but Exculding Seigniorage charges & GST
Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, Overheads & Contractors Profit @13.615% etc.complete but Exculding Seigniorage charges & GST etc., complete for Foundations (APSS No. 402)
Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing including Overhead charges & Contractor's Profit @ 13.615% but exculding seigniorage charges & GST - For Column Footings
Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing including Overhead charges & Contractor's Profit @ 13.615% but exculding seigniorage charges & GST - For Pedastals
Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing including Overhead charges & Contractor's Profit @ 13.615% but exculding seigniorage charges & GST - For Columns
Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing including Overhead charges & Contractor's Profit @ 13.615% but exculding seigniorage charges & GST - For Plinth beams
Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing including Overhead charges & Contractor's Profit @ 13.615% but exculding seigniorage charges & GST - For Roof beams
Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing including Overhead charges & Contractor's Profit @ 13.615% but exculding seigniorage charges & GST - For Roof slab 140mm thick
Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing including Overhead charges & Contractor's Profit @ 13.615% but exculding seigniorage charges & GST - For Lintels
Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing including Overhead charges & Contractor's Profit @ 13.615% but exculding seigniorage charges & GST - For Sunshades
Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc., complete with a compresive strength not lessthan 50 kg/sqm Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST- For Basement over plinth beam
Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc., complete with a compresive strength not lessthan 50 kg/sqm including Overhead charges & Contractor's Profit @ 13.615% but exculding seigniorage charges & GST- For Superstructure Walls
Providing High Yield Strength Deformed(HYSD) steel bars (Fe.500-d) as per IS 1786-1985) of 8mm to 20mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved designes and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wirre, cover blocks, hairs,overlaps, spacers, dowels, wastage etc. and all operational, incidental, and labour charges such as cutting, bending,placing in position, tying etc. complete including overhead charges and contractor's profit @13.615% but excluding GST.
Providing impervious coat to exposed RCC roof slab surfaces of sump , sump side wall,sump bottom slab,in side of septic tank ,in sunken slabs etc. to required slopes with CM (1:3) prop.20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg/bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, including seigniorage charges, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and Overheads & Contractors profit complete for finished item of work. (APSS No. 901 & 903) Including Overhead charges & Contractor's Profit @ 13.615% but exculding seigniorage charges & GST
Cost, supply and fixing of RCC Jollies 40mm thick including cost and coveyance of all materials and all labour charges etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but exculding seigniorage charges & GST
Cost and supply of MS Grills including cost and conveyance to work spot and Fabrication charges of steel like cutting rods, welding grills ,placing in position etc. complete including Overhead charges and Contractor's profit @13.615% but excluding GST.
Ceiling plastering with CM(1:5) Prop:8mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished of work. (APSS 901,906) Including Overhead charges and Contractor's profit @13.615% but excluding GST.
Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials and all labour charges etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.
Flooring with Double charged vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, for finished item of work, but excluding the cost of conveyance of all materials including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST
Providing skirting to internal walls to 15 cm height/risers of steps with Nano polished Vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like stone, cement, sand and water etc., complete including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST .
Supply and fixing of Medium Teak wood Door of Size1.20x2.10 mts with all specified fixtures as per approved design Including cost and conveyance of all materials & labour charges.Including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST .
Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm) including contractors profit & over head charges but excluding GST & seigniorage charge.
Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc. all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work.(APSS No. 911) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST - for Interior walls
Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc. all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work.(APSS No. 911) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST for Exterior walls
Supply and Fixing of 25mm dia 1.80 mm thick (Medium type) P.V.C. pipe of make Sudhakar/Maco plast/Modi (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete. Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST
Supply and Fixing of 25mm dia 2.20 mm thick heavy type P.V.C. pipe of make Sudhakar/Maco plast/Modi (ISI MARK) concealed in Roof Slab with all required accessories including masonary work and labour charges etc., complete. Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant Low Smoke (FRLS) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, 1 way switch, GI metal box, front plate covering to switch, Ceiling rose including all labour charges etc. complete for light, bell, fan and exhaust fan points in Non-Residential Buildings Makes of Wires : Finolex / R.R. Cable Makes of Switches : Legrand rteor/Schneider Zen celo/Hobewell Blenge plus, Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST
Supply and fixing of 6A 3 pin wall plug socket with 6A, 1way switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete Makes of Switches : Legrand Arteor/Schneider Zen celo/Honewell Blenge plus, Including Overhead charges & Contracto'rs Profit @ 13.615% but excluding GST
Supply and fixing of 16A 3pin and 6A 3pin plug socket with shutter and 16A modular type switch with indicator, Galvanised hot deep box, cover frame including earth connections and all labour charges etc. complete Makes of Switches : Legrand Arteor/Schneider Zen celo/Honewell Blenge plus, Including Overhead charges & Contractor's Profit @13.615% etc.complete but excluding GST
Supply and fixing of batten holder / slanting holder of make Anchor / Gold medal Olive/Million Zoom in lieu of ceiling rose of light point complete with all connections and all labour charges with 7 Watt LED Bulb Including Overhead charges & Contractor's Profit @13.615% etc.complete but excluding GST
Supply and run of 1 of 14/0.3mm (1.0 Sqmm) FR / FRLS PVC insulated flexible copper cable of makes GM/L&T/RPG/Havells/V-Guard/Powerflex/Polycab/Gold Medal/Standard/Million/Vimal/Sun cab/Paragon/Delton (ISI MARK) in existing pipe for earth continuity including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge. complete for finished item of work Including Overhead charges & Contractor's Profit @13.615% etc.complete but excluding GST
Supplying & run of 2 of 36/0.3mm (2.5 Sqmm)FRLC PVC insulated flexible copper cable of makes GM/L&T/RPG/Havells/V-Guard/Powerflex/Polycab/Gold Medal/Standard/Million/Vimal/Sun cab/Paragon/Delton (ISI MARK) in existing pipe for mains including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge complete for finished item of work Including Overhead charges & Contractor's Profit @13.615% etc.complete but excluding GST
Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high pwer LEDs having system efficacy of >=100 lumens/ watt, with PF>0.9, surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K-5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST
Supply, transportation & Fixing of 1200mm (48") sweep 230V, A.C 50 Hz. ceiling fan of make Crompton Decora/Bajaj G Gold/Havells Deco/Usha Striker/Orient PSPO with 3 blades and double ball bearings with all standard accessories and stepped type electronic regulator of makes Miltec/Vimal opel/Maru Mantero/Starex smile/CPL including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge complete for finished item of work Including Overhead Charges & Contractor's Profit @13.615% etc.complete but excluding GST
Supply and erecting Step type Modular regulator for ceiling fans 900/1200/1400mm sweep complete erected on existing board Including Overhead charges & Contracto'rs Profit @ 13.615% but excluding GST
Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc. complete for small quarters Including Overhead charges & Contractor's Profit @13.615% etc.complete but excluding GST
Supply and fixing of 18 x 30 peeta boards including cost and conveyance of all materials, and all labour charges etc. complete including Overhead charges & Contractor's Profit @ 13.615% but excluding GST
Supply and fixing of 32A 240V Porcelain Rewirable Fuse Units for mains including cost and conveyance of all materials, and all labour charges etc. complete including Overhead charges & Contractor's Profit @ 13.615% but excluding GST
Supply and fixing SPN 8 way Distribution board with IP-43 protection (Metal Door) suitable for single phase 40A DP Isolator as incomer and 8 Nos. 6-32A 10 kA SP MCBs (make Standard/Havells/HPL/Toyoma) as outing going including internal connections and labour charges for surface / flush mounting etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST
Supply and Run of 4 of 16 Sq.mm WPSC Aluminium cable along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including labour charges etc., complete for service mains Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Bld. Doc.doc
TENDER_DOCUMENT • 0.64 MB
BOQ.xlsx
TENDER_DOCUMENT • 0.10 MB
DECLARATION.docx
TENDER_DOCUMENT • 0.02 MB
Skill Development Centre Kunaparajuparva.xls
TENDER_DOCUMENT • 0.11 MB
Download all tender documents and submit your bid