REPAIRS TO INTERNAL WATER SUPPLY LINE AND FLOORS IN RESIDENTIAL AREA AT SITE A and B SAGAR AND VARUNA COMPLEX AT NPOL KOCHI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises Complete all as specified and directed by Engineer-in-Charge.

M&L Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4 Complete all as specified and directed by Engineer-in-Charge.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match Complete all as specified and directed by Engineer-in-Charge.

S&F non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.18 sqm but n exc 0.38sqm in floor etc set and jointed in neat cement slurry and pointed in white/coloured cement to match, Complete all as specified and directed by Engineer-in-Charge.

S&F non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.18 sqm but n exc 0.38sqm in skirting etc set and jointed in neat cement slurry and pointed in white/coloured cement to match, Complete all as specified and directed by Engineer-in-Charge.

S&F glazed ceramic tiles in vertical surfaces 350x250x7 mm thick set and jointed in neat cement slrry and pointed in white/coloured cement to match Complete all as specified and directed by Engineer-in-Charge.

M&L rendering 10 mm thick in CM 1:4 on fair faces of brick work or concrete surface Complete all as specified and directed by Engineer-in-Charge.

M&L Applying two coat of oil bound distemper over a coat of primer including preparation of old decorated or unplastered surfaces of walls including cornices, pilasters by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots and complete all as specified and directed by Engineer-in-Charge.

M&L Applying one coat of oil bound distemper including preparation of old decorated or unplastered surfaces of ceiling including cornices, pilasters by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots and complete all as specified and directed by Engineer-in-Charge.

M&L Applying one coat of synthetic enamel paint over a coat of primer including preparation of wood and wood based surfaces of any description exc 10cm width or girth complete all as specified and directed by Engineer-in-Charge.

M&L Applying one coat of synthetic enamel paintover a coat of primer including preparation of steel and iron surfaces of any description exc 10cm width or girth complete all as specified and directed by Engineer-in-Charge.

Taking down shutters and re-fixing in the same opening of any description exc., 1 Sqm and n. exc., 2 sqm each Complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15 mm bore.

Ditto- as per item No 13 above but 20 mm bore -ditto-

Unplasticised PVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 15 mm bore Complete all as specified and directed by Engineer-in-Charge.

Ditto- as per item No15 above but 20 mm bore

Cutting chasing, pinning in making good to takings where required and pointing in cement mortar 1:3 for concealed water tubing, cutting not exc 10 cm girth in brick walls Complete all as specified and directed by Engineer-in-Charge.

S&F Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including provision of cement concrete bedding Complete all as specified and directed by Engineer-in-Charge.

S&F in repairs wash basins, vetreous china (flat back ) size 550x400 mm including cutting for and pinning in ends of brackets or erecting stand supply and fixing of coupling and waste pipe including brackets Complete all as specified and directed by Engineer-in-Charge.

S/F in repairs vitreous china water closet pan (pedestal pattern) including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device Complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15 mm dia Complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Stop valves 15 mm bore, , chromium plated with long shank and cup (Concealed type) cast copper alloy, screwed down, high presure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions Complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed 15 mm bore dia but fancy type Complete all as specified and directed by Engineer-in-Charge.

S&F in repair chromium plated shower rose with or with out swivel joints of 125 mm size, including fixing to steel pipe Complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC Connection 15mm size with PTMT nuts of length 450mm Complete all as specified and directed by Engineer-in-Charge.

Taking down and removing to or from store chowkats or frames not exc 1.5 sq. m each but with shutters (without taking off shutters from the frames) Complete all as specified and directed by Engineer-in-Charge.

Taking down and removing to or from store chowkats or frames exc 1.5 sq. m and not exc 4 sqm each but with shutters (without taking off shutters from the frames) Complete all as specified and directed by Engineer-in-Charge.

Taking down and removing to or from store shutters of any description exc 1 sqm and n exc 2 sqm each Complete all as specified and directed by Engineer-in-Charge.

S&F solid PVC door frame of size 50 mmX 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube Complete all as specified and directed by Engineer-in-Charge.

S&F factory make solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside wiht solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & botom rail, pampling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement Complete all as specified and directed by Engineer-in-Charge.

M&L Sheet glass 3mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane Complete all as specified and directed by Engineer-in-Charge.

S&F aluminium alloy wire cloth 0.45 mm nomial dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples Complete all as specified and directed by Engineer-in-Charge.

S&F aluminium alloy wire cloth in repairs 0.45 mm nomial dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples Complete all as specified and directed by Engineer-in-Charge.

Glazed and skeleton shutters 30 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc.; sizes of members of shutters as specified in SSR Part-I section 8, clause 8.24 (a); supplied and fitted to chowkats 2nd class hard wood 30mm Complete all as specified and directed by Engineer-in-Charge.

Hacking out broken glass (any thickness ) size or quality from wooden frames,stone ,concrete or brick surrounds glazed with puttyor fixed with beads Complete all as specified and directed by Engineer-in-Charge.

Plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed 1 st class hard wood Complete all as specified and directed by Engineer-in-Charge.

Glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc.; sizes of members of shutters as specified in SSR Part-I section 8, clause 8.24 (a); supplied and fitted to chowkats 2nd class hard wood 35mm Complete all as specified and directed by Engineer-in-Charge.

Plain framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats Complete all as specified and directed by Engineer-in-Charge.

S&F Butt hinges, medium weight cold rolled mild steel 100 mm size.

S&F Butt hinges, medium weight cold rolled mild steel 75 mm size.

S&F Aluminium anolised, barrel tower bolts of extruded section 150mm long.

S&F Aluminium anolised, barrel tower bolts of extruded section 100mm long.

S&F extruded aluminium alloy handles fabricated type anodised 150 mm long.

Supply and fix foot operated door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring and cover plate overall length 150 mm.

S&F Aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy, 300 mm long.

M&L painting to wood or wood based surface applying 2 coats of sythetic enmal paint over 1 coat of primer including peparation of surface Complete all as specified and directed by Engineer-in-Charge.

K A ALIYAR

St George Engineering Works