SUPPLY OF OFFICE FURNITURE, COMPUTER, PRINTER, AIR CONDITIONER AND OTHER OFFICE EQUIPMENT FOR OFFICE BUILDING NAGAR PARISHAD CHAKRADHARPUR

1) TABLE 1 – 2100 L X 900 W X 750 H MM 2) SIDE TABLE - 900 L X 450 W X 675 H MM 3) TABLE TOP & GABLE END - 25MM Thick Moisture Resistant Board. 4) SIDE COMBO UNDERCOUNTER STORAGE - As per Approved Shade with Handles/Locks & required accessories. The back of the unit is made from 18 mm Moisture Resistant Board. 5) PERFORMANCE: Material should be of anti-scratch, anti-dirty, Anti-fungal/ Moistureresistant under humid conditions, water proof, Shock resistance and environmentally friendly. 6) Colour/ shade can be finalized after communication with bid inviting authority. 7) In under table storage: Moisture Resistant board with 3 Drawer (2 Drawer + 1 Filing) with roller slide mechanism for 2 Drawers and Ball bearing slide for 1 Filing Unit.

1) TABLE 3 – 1200 L X 675 W X 750 H MM 2) TABLE TOP & GABLE END - 25MM Thick Moisture Resistant Board . 3) PERFORMANCE: Material should be of anti-scratch, anti-dirty, Anti-fungal/ Moistureresistant under humid conditions, water proof, Shock resistance and environmentally friendly. 4) Colour/ shade etc all complete as per the direction of engineer-in-charge

1) TABLE 5 – 1500 L X 675 W X 750 H MM 2) TABLE TOP & GABLE END - 25MM Thick Moisture Resistant Board . 3) PERFORMANCE: Material should be of anti-scratch, anti-dirty, Anti-fungal/ Moistureresistant under humid conditions, water proof, Shock resistance and environmentally friendly. 4) Colour/ shadeetc all complete as per the direction of engineer-in-charge

1) TABLE 6 – 1500 L X 600 W X 750 H MM 2) TABLE TOP & GABLE END - 25MM Thick Moisture Resistant Board . 3) PERFORMANCE: Material should be of anti-scratch, anti-dirty, Anti-fungal/ Moistureresistant under humid conditions, water proof, Shock resistance and environmentally friendly. 4) Colour/ shadeetc all complete as per the direction of engineer-in-charge

1) TABLE 7 – 1200 L X 450 W X 900 H MM 2) TABLE TOP & GABLE END - 25MM Thick Moisture Resistant Board . 3) PERFORMANCE: Material should be of anti-scratch, anti-dirty, Anti-fungal/ Moistureresistant under humid conditions, water proof, Shock resistance and environmentally friendly. 4) Colour/ shadeetc all complete as per the direction of engineer-in-charge

1) TABLE 8 – 2400 L X 525 W X 750 H MM 2) TABLE TOP & GABLE END - 25MM Thick Moisture Resistant Board . 3) PERFORMANCE: Material should be of anti-scratch, anti-dirty, Anti-fungal/ Moistureresistant under humid conditions, water proof, Shock resistance and environmentally friendly. 4) Colour/ shadeetc all complete as per the direction of engineer-in-charge

1) TABLE 9 – 7200 L X 1500 W X 750 H MM 2) TABLE TOP & GABLE END - 25MM Thick Moisture Resistant Board . 3) PERFORMANCE: Material should be of anti-scratch, anti-dirty, Anti-fungal/ Moistureresistant under humid conditions, water proof, Shock resistance and environmentally friendly. 4) Colour/ shadeetc all complete as per the direction of engineer-in-charge

1) TABLE 10 – 5175 L X 750 W X 750 H MM 2) TABLE TOP & GABLE END - 25MM Thick Moisture Resistant Board . 3) PERFORMANCE: Material should be of anti-scratch, anti-dirty, Anti-fungal/ Moistureresistant under humid conditions, water proof, Shock resistance and environmentally friendly. 4) Colour/ shadeetc all complete as per the direction of engineer-in-charge

EXECUTIVE CHAIR (1) Product Dimensions: Length (76 cm), Width (67 cm), Height (101 cm) (2)High Back chair with Back & Seat: Ply base Construction with High Density foam & high grade Leatherite Upholstery with height adjustment, Providing and supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam having density 48kg/m³ and the back shall be made of plywood padded with high resilience polyurethane foam having density 32kg/m³. The seat and back shall be upholstered with leatherite tapestry 0.7mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine which helps to provide full back support as well as head support. (3) Arm Rest: Wooden Fixed Armrest with leatherite padded, the chair shall be supplied with hard wood with polish cushion arm having leatherite top completely joint with seat & back. (4) Mechanism: Multi Locking synchronized Tilt; For seating durability the chair shall have torsion Bar 360 degree revolving mechanism and tilt tension adjustment which provides back strength for the chair. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. (5) Colour/ shade can be finalized after communication with bid inviting authority.

HIGH BACK CHAIR 1. Product Dimensions: Length (70 cm), Width (67 cm), Height (100 cm) 2. Providing and supplying a High back chair with ergonomic design, comfortable & aesthetically appealing. 3. Primary Material: Glass-filled poly-amide, Upholstery Material: Fabric/Color: Carbon Black/ NAVY BLUE, Finish: Matte, Style: Contemporary/Adjustable armrest 4. The seat and back shall be upholstered with leatherite tapestry 0.7mm thick and 535 GSM. 5. The backrest shall be made by keeping the natural curvature of the spine which helps to provide full back support as well as head support. 6. For seating durability the chair shall have Centre tilt 360 degree revolving mechanism and tilt tension adjustment which provides back strength for the chair. 7. Colour/ shade can be finalized after communication with bid inviting authority.

MID BACK CHAIR 1. Product Dimensions: Length (51 cm), Width (65 cm), Height (95 cm) 2. Providing and supplying a Mid back chair with ergonomic design, comfortable & aesthetically appealing. 3. Primary Material: Glass-filled poly-amide, Upholstery Material: Fabric/Color: Carbon Black/ NAVY BLUE, Finish: Matte, Style: Contemporary/Adjustable armrest 4. The seat and back shall be upholstered with leatherite tapestry 0.7mm thick and 535 GSM. 5. The backrest shall be made by keeping the natural curvature of the spine which helps to provide full back support as well as head support. 6. For seating durability the chair shall have Centre tilt 360 degree revolving mechanism and tilt tension adjustment which provides back strength for the chair. 7. Colour/ shade can be finalized after communication with bid inviting authority.

STATIC VISITOR CHAIR (1). Sled Based Visitor: The visitor chairs for office have a cantilevered, tubular under structure that is responsive to body movements and provides greater comfort. (2). Contoured Backrest: The backrest is specifically designed for the human body with contoured lumbar support which protects the spine and leaves the shoulder free for easy movement. (3). Thick Foam: The backrest and seat comes with a thick foam that makes seating a pleasure. (4). One Piece Armrest: The armrests are made of one piece , well rounded polyurethane, that is indifferent to climatic conditions. (5). Ergonomic Seat: The seat is scientifically designed for even distribution of body weight which reduces fatigue (6). Dimensions W x H x D (cm): 55 x 80.5 x 61 (7). Finish Color : Colour/ shade can be finalized after communication with bid inviting authority.

PRINTER DESK 1) TABLE 13 – 1375 L X 450 W X 750 H MM 2) TABLE TOP & GABLE END - 25MM Thick Moisture Resistant Board . 3) PERFORMANCE: Material should be of anti-scratch, anti-dirty, Anti-fungal/ Moistureresistant under humid conditions, water proof, Shock resistance and environmentally friendly. 4) Colour/ shadeetc all complete as per the direction of engineer-in-charge

Sofa Set 1 Seater 1. Armrest Frame: Plywood, Polyurethane foam 2.0 lb/cu.ft., Polyester wadding, Particleboard, Nonwoven polypropylene, Solid wood, Fiberboard 2. Leg: Polypropylene 3. Coated fabric parts: 100 % polyurethane, 75 % polyester, 25 % cotton 4. Main parts: Dyed through top-grain leather with a treated, embossed and pigmented surface Sofa section 5. Frame: Plywood, Polyurethane foam 1.2 lb/cu.ft., Polyester wadding, Particleboard, Solid wood, Fiberboard 6. Seat cushion: High-resilience polyurethane foam (cold foam) 2.2 lb/cu.ft., Polyester wadding 7. Back cushion: 30% cut polyurethane foam/ 70% polyester fibers 8. Coated fabric parts: 100 % polyurethane, 75 % polyester, 25 % cotton Main parts: 9. Dyed through top-grain leather with a treated, embossed and pigmented surface 10. Measurements Height including back cushions: 80 cm Width: 92 cm Depth: 86 cm Height under furniture: 4 cm Armrest width: 15 cm Armrest height: 65 cm Seat width: 65 cm Seat depth: 55 cm Seat height: 45 cm 11. Finish Color: Colour/ shade can be finalized after communication with bid inviting authority.

Sofa Set 2 Seater 1. Armrest Frame: Plywood, Polyurethane foam 2.0 lb/cu.ft., Polyester wadding, Particleboard, Nonwoven polypropylene, Solid wood, Fiberboard 2. Leg: Polypropylene 3. Coated fabric parts: 100 % polyurethane, 75 % polyester, 25 % cotton 4. Main parts: Dyed through top-grain leather with a treated, embossed and pigmented surface Sofa section 5. Frame: Plywood, Polyurethane foam 1.2 lb/cu.ft., Polyester wadding, Particleboard, Solid wood, Fiberboard 6. Seat cushion: High-resilience polyurethane foam (cold foam) 2.2 lb/cu.ft., Polyester wadding 7. Back cushion: 30% cut polyurethane foam/ 70% polyester fibers 8. Coated fabric parts: 100 % polyurethane, 75 % polyester, 25 % cotton Main parts: 9. Dyed through top-grain leather with a treated, embossed and pigmented surface 10. Measurements Height including back cushions: 80 cm Width: 92 cm Depth: 90 cm Height under furniture: 4 cm Armrest width: 15 cm Armrest height: 65 cm Seat width: 140 cm Seat depth: 55 cm Seat height: 45 cm 11. Finish Color: Colour/ shade can be finalized after communication with bid inviting authority.

Sofa Set 3 Seater 1. Armrest Frame: Plywood, Polyurethane foam 2.0 lb/cu.ft., Polyester wadding, Particleboard, Nonwoven polypropylene, Solid wood, Fiberboard 2. Leg: Polypropylene 3. Coated fabric parts: 100 % polyurethane, 75 % polyester, 25 % cotton 4. Main parts: Dyed through top-grain leather with a treated, embossed and pigmented surface Sofa section 5. Frame: Plywood, Polyurethane foam 1.2 lb/cu.ft., Polyester wadding, Particleboard, Solid wood, Fiberboard 6. Seat cushion: High-resilience polyurethane foam (cold foam) 2.2 lb/cu.ft., Polyester wadding 7. Back cushion: 30% cut polyurethane foam/ 70% polyester fibers 8. Coated fabric parts: 100 % polyurethane, 75 % polyester, 25 % cotton Main parts: 9. Dyed through top-grain leather with a treated, embossed and pigmented surface 10. Measurements Height including back cushions: 80 cm (31 1/2 ") Width: 241 cm (94 7/8 ") Depth: 98 cm (38 5/8 ") Height under furniture: 4 cm (1 5/8 ") Armrest width: 15 cm (5 7/8 ") Armrest height: 65 cm (25 5/8 ") Seat width: 211 cm (83 1/8 ") Seat depth: 55 cm (21 5/8 ") Seat height: 45 cm (17 3/4 ") 11. Finish Color: Colour/ shade can be finalized after communication with bid inviting authority.

CENTRE TABLE (1). Dimensions W x H x D (cm):100 x 45 x 65 (2). Finish Colour : Colour/ shade can be finalized after communication with bid inviting authority. (3). Primary Material : Solid Wood (4). Style: Contemporary & Modern (5). Complementing Design & Aestehtics The simple yet sleek design of the coffee table will help it complement the existing decor of your living space and blend in well with your choice of sofas and couches (6). Tempered Glass Top The 10mm thick tempered glass top is built to hold up to 40 kgs of weight. So stack the table up with your essentials and more! (7). Storage Space The table's storage neatly tucks away all your essential tit-bits like magazines and board games to maintain the aesthetic look. (8). Easy Maintenance with its smooth and neat finish.

3 SEATER STEEL CHROME CHAIR Product Dimensions ‎64D x 180W x 80H Centimeters Size ‎Standard Back Style ‎Solid Back Special Feature ‎Steel Product Care Instructions ‎Wipe Clean Seat Material Type ‎Metal Recommended Uses For Product ‎Offce Finish Type ‎Chrome Finish,Steel Included Components ‎Powder Coated Steel Seat, Crome Plated Handles And Legs, Ms Beam In Black Color.Shape ‎rectangularSurface Recommendation ‎Hard Floor Form Factor ‎Contemporary Furniture Finish ‎Chrome Color ‎Silver

DECORATIVE FLOWER POT Material - Steel Usage - Decoration Feature - For Office, Home Decor & Garden etc Color - Black, White , Grey, Cream, Golden etc.

FILE CABINET 3' X 1.33' X7' 1) Dimension: 900 mm(w) x 400mm(d) x2100 mm(ht) 2) Storage Top is made up of 18mm thick, Moisture Resistant board. Storage carcass 18mm thick plpb & shutter is 18mm thick plpb. Back in 9mm thick Moisture Resistant board Storage is having openable shutter with locking arrangement & 18mm thick. 3) Hardware included (i.e. Hinges , Handle & Lock) 4) Performance: Material should be of anti-scratch, anti-dirty, Anti-fungal/ Moistureresistant under humid conditions, water proof, Shock resistance and environmentally friendly. 5) Colour/ shade etc all complete as per the direction of engineer-in-charge.

AC 1.5 Ton Type Split Capacity 1.5 Ton Star Rating 3 Star Colours White Cooling Capacity 5150 W Compressor Rotary Refrigerant R32 Operating Modes Comfort Sleep, Modes - (Auto/Cool/ Fan / Dry), Precision Cooling-Decimal Setting, Turbo Cooling Dehumidification Yes Condenser Coil Copper Remote Control Yes Dimensions Indoor W x H x D 965 mm x 319 mm x 215 mm Indoor Unit Weight 9 kg Outdoor W x H x D 968 mm x 652.5 mm x 367 mm Outdoor Unit Weight 32 kg Performance features Cooling Coverage Area Upto 165 Sq Ft sq ft Power features Power Requirement AC 230 V, 50 Hz Power Consumption 1450 W Air flow and filter features Auto Air Swing Yes Other Air Flow Features Air Vent: Cross Flow Anti-bacteria Filter Yes Dust Filter Yes Convenience features Auto Restart Yes Brand Any approved brand etc all complete as per the direction of engineer - in -charge

AC 2 TON Type Split Capacity 2 Ton Star Rating 3 Star Colours White Cooling Capacity 5150 W Compressor Rotary Refrigerant R32 Operating Modes Comfort Sleep, Modes - (Auto/Cool/ Fan / Dry), Precision Cooling-Decimal Setting, Turbo Cooling Dehumidification Yes Condenser Coil Copper Remote Control Yes Dimensions Indoor W x H x D 965 mm x 319 mm x 215 mm Indoor Unit Weight 9 kg Outdoor W x H x D 968 mm x 652.5 mm x 367 mm Outdoor Unit Weight 32 kg Performance features Cooling Coverage Area Upto 165 Sq Ft sq ft Power features Power Requirement AC 230 V, 50 Hz Power Consumption 1450 W Air flow and filter features Auto Air Swing Yes Other Air Flow Features Air Vent: Cross Flow Anti-bacteria Filter Yes Dust Filter Yes Convenience features Auto Restart Yes Brand Any approved brand etc all complete as per the direction of engineer in charge.

PC - DESKTOP (All-in-One) Operating System - Windows 11 Home Processor - AMD Ryzen-3 Memory - 8 GB RAM Memory slots - 2 SODIMM Hard drive - 512 GB SSD Screen size - 20" Graphics - Inbuilt Keyboard & mouse Power - 65 W Smart AC Power Adapter Dimension - 49.03 X 20.45 X 38.07 CM Weight - 5.7 Kg Any approved brand etc all complete as per the direction of engineer in charge

PRINTER Cartridge Technology Composite Cartridge Printing Technology Laser Type of Printing Mono Paper Size A4 Print Speed per minute as per ISO/IEC 24734 in (A4) Size - Mono 20 Resolution (Dpi) 600x600 Memory (MB) 64 Processor Speed 400 MHz Network Connectivity Yes Wireless Connectivity Yes If Yes, Type of Wireless Connectivity Wireless (802.11 b/g/n) USB Port Yes Number of Main Paper Trays 1 Each Main Paper Tray Capacity 150 Yield of the cartridge/Ink Tank/Ink Pack supplied with Machine as per ISO/IEC: 19752/2004(E) for Black (Number of prints) 1500 Duty Cycle (No of Prints/month) 10000 Minimum Operating Temperature (Degree C) 10 Maximum Operating Temperature (Degree C) 30 Minimum Operating Humidity (%RH) 20 Maximum Operating Humidity (% RH) 70 Dimensions(In mm x mm x mm ) 331 x 215 x 178 Weight (In kg) 4.18 Brand Any approved brand etc all complete as per the direction of engineer in charge

All in one P.C. i7, 13th generation of approved make etc all complete as per the direction of engineer-in-charge

Smart TV of approved make etc all complete as per the direction of engineer-in-charge

Kitchen Basic items (Gas Stove, cup set, glass, crocary setetc) etc all complete as per the direction of engineer-in-charge

Water Dispenser Hot, Cold, Normal Water Dispenser of approved make etc all complete as per the direction of engineer-in-charge

Please Enable Macros to View BoQ information