PAINTING TO RUNWAY AND ANCILLARIES INCLUDING GRASS CUTTING JUNGLE JIM IN TECHNICAL AREA AT AF STATION CHANDIGARH

Amount

Material and labour for painting one coat of water based paint after preparation of old surfaces as per manufacturer's instructions for making lines, dashes, arrows, letters etc. on bituminous/ concrete roads, pavement, runways and other similar surfaces exc. 10 cm width or girth, with road marking paint/ traffic paint (water based) conforming to the requirements of IS-164 (1981) thickness in micron not less than 50 micron, white or golden yellow or any other shade approved by GE/Users by using air less spray machine Graco line 3900 with two guns and the maximum GPM (LPM) : 160 (6.0) PSI (Bar) 3300 (227) Engine CC (HP) 120 CC and maximum tip size : 0.029, complete all as specified and directed.

Material & labour for Water Born Paint (WBP) having DFT 240 micron thick road marking strips (retro-reflective) of specified shade / colour using by fully/ semi automatic paint applicator machine ( using cold airless spray / striper machine with minimum two spray gun) including application of Drop on glass beads driven by experienced operator on road surfaces including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc complete and accordance with applicable specification on bitumenus surfaces / concrete by using air less spray machine colour of paint shall be white / yellow / Black / Red or any colour as approved by GE/Users on Taxiway / Dispersal markings exceeding 10 cm width or girth as per recommended dimension, application of the paint by Machine Graco line lazer 3900 with 2 guns and the maximum GPM(LPM) : 160 (6.0) PSI (Bar) - 3300 (227), Engine CC (hp) 120 cc and maximum tip size : 0.029, complete all as specified and directed. Note for item No 1 & 2: The work will be carried out by authorized applicator of Manufacture/Company as approved by the GE.

Material & labour for painting one coat of Oil paint dashes preparation of surfaces as per manufacturer's instructions for making lines, dases, arrows, letters etc. on road pavements, runways and other similar surfaces exc 10 cm width or girth, with road marking paint / traffic paint white or golden yellow in tint or any other shade as directed, complete all as specified and directed.

Providing and operating two Tractors (with driver) with Jungle Jim for removal of grass shrubs / vegetation, scraping / cutting or ploughing with harrow/ cultivator) on requirements basis (within 48 hrs of notice / demand) including two casual labours / day for removing the rubbish from site to out side MoD land complete all as specified and directed. Note: (I) Providing and operating two tractors with jungle Jims alongwith drivers including two labourers shall be measured as one unit i.e one Hour. (II). In case only one tractor (with driver with jungle jims and one labour is required and deployed, the payment under this item shall be reduced by 50% i.e half unit shall be considered against one hour working.

Providing and operating two Bush cutter (with operator) with Bush cutter Blade for grass shrubs / Vegetation scraping / cutting on requirement basis (within 48 Hrs of notice / demand) and Two casual labour / day for removing the rubbish from the outside MoD land, complete all as specified and directed.

Surface derssing /Grass scraping not exceeding 15 cm deep and getting out in soft / loose soil along the runway shoulder including grass vegetation, shrubs and earth work from the edge of runway, taxiway, surrounding blast pans or similar work complete all as specified and directed. and removing the rubbish taken from the site and leaving out side of MoD land, complete all as specified and directed.

De-silting of drain of depth upto 1.50 metre by rough excavation for cleaning, getting out muddy soil including cutting small bushes, small trees girth not exceeding 30 cm from sides of brick lined drain, including removing excavated materials exceeding 50 metre but not exceeding 250 metre from the strarting point and depositing where directed at a level not exceeding 1.5 metre above from the starting point, complete all as specified and directed by the Engineer-in-Charge.

De-silting of drain of depth exc 1.50m but n.exc. to 3.00 m by rough excavation for cleaning, getting out muddy soil including cutting small bushes, small trees girth not exceeding 30 cm from sides of brick lined drain, including removing excavated materials exceeding 50 metre but not exceeding 250 metre from the starting point and depositing where directed at a level not exceeding 1.5 metre above from the starting point , complete all as specified and directed.

kailash chawla

M/s DATAAR BUILDERS

M/S MATLOOB AHMED