PERIODICAL SERVICES REPAIR TO JOINERY PLUMBING SANITARY FITTINGS AND FIXTURES FLOORING ROOFING WALL PANELLING REPAIR CLEANING OF SEWAGE LINE MANHOLES SEPTIC TANKS REPAIR TO FENCING DRAINS AND RETAINING WALL AT HARSIL SUKHI TEKLA UNDER GE 871 EWS

Amount

Dismantling plain corrugated steel sheeting any gauage thickness including Nainital and similar pattern complete all as specified and directed.

Dismantling of frame work timber scantling 40 Sq cm and over in section in any position complete all as specified and directed.

Dismantling of timber fillets under 40 Sq cm in section complete all as specified and directed.

Taking down chowkats or frames with shutters (with out taking of shutter from the frame) exc 1.5 sqm but n. exc 4sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (with out taking of shutter from the frame) exc 1.5 sqm each complete all as specified and directed.

Taking down of shutter exc 1 sqm and not exc 2 sqm each complete all as specified and directed.

Taking down of shutter n.exc 1 sqm each complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and directed.

Dismantling water tank and removing to store exceeding 250 but n.exc 500 ltrs complete all as specified and directed.

Dismantling water tank and removing to store exceeding 500 but n.exc 1000 ltrs complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (Using 12.5 mm graded stone aggregates) of 25 mm thick as in leveling course ,finished surfaces even and rough to receive floor finish complete all as specified and directed.

M&L for PCC 1:4:8 type D2,(using 40mm graded stone aggregates) as in foundation, filling and mass concrete all as specified and directed.

M&L for Non skid ceramic coloured tiles (300x300)x7 mm thick in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in cement mortar 1:6 complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 350 x 250 x 7mm/450 x 350 x 7mm thick over and including 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 40 mm thick cement concrete type B-1,1:2:4 (Using 20 mm graded aggregate) as in floor, finishing cement concrete surface even and smooth with out using extra cement complete all as specified and directed.

Supplied only glass dividing strips 3 mm thick and 38 mm wide and inserted in position to confirm design complete all as specified and directed.

S&F for 2nd class hard wood plain ,solid ,straight chowkats and frames ,wrought framed rebated on the solided rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F for 30mm thick flush shutter solid core construction with particle board core and plywood face panels, commercial type on both side complete all as specified and directed.

S&F for 35mm thick IInd class hard wood glazed and skelton door shutter divided into square, open rebated and prepared to receive glass/gauge etc (without sash bars) edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass/gauge etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.20 (a) complete all as specified and directed.

S&F for Solid PVC door frame of size 50X47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying & fixing in opening complete all as specified and directed .

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC'C' channel having a PVC sheet strip of 20mm width stuck inside solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and directed.

S&F for bands, straps, supports or stays for rain water, hooks (stay) heavy for large gates, hook and pintle hinges clamps, hold fasts, hooks for hanging jams and similar small articles Fe-410-0 or Fe-310-0 complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (Using 20mm graded stone agg) as in lintel upto 1.5 m clear span, cills, steps, seismic and other similar articles ,bed plate copings & hold fast including form work etc complete all as specified and directed.

M&L for rubber beading for fixing glass panes in aluminium frame work complete all as specified and as directed.

S&F for butt hinges of stainless steel 100mm size complete all as specified and directed.

S&F for butt hinges medium weight cold rolled mild steel 100mm complete all as specified and directed.

S&F for mild steel butt hinges of 75mm long each complete all as specified and directed.

S&F for 200 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 150 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 150mm long anodised extruded aluminium alloy handles, fabricated type. complete all as specified and directed.

S&F for 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F for floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring, fixed in floor (140mm size), fixed as in repair complete all as specified and directed.

S&F in repair for door closer hydraulically regulated aluminum (dia cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg, fixed as in repairs, complete all as specified and directed.

S&F in repair for 300mm mild steel ordinary rat tail rod pattern springs incl roller and roller plate complete mild steel all as per specified and directed.

S&F for 0.56 mm nominal dia wire galvanised mild steel wire cloth and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

S&F in repair for 0.56mm nominal dia wire galvanised mild steel wire cloth and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F for 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

M&L for preparation of old decorated steel surfaces any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint on roof complete all as per specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint on roof over a coat of red oxide primer complete all as per specified and directed.

M&L for Preparation of new wooden surface of any description over 10cm width or girth applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for Preparation of old wooden surface of any description over 10cm width or girth applying one coat of synthetic enamel paint complete all as specified and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F in repair for 20 mm dia chromium plated pipes for curtain rods complete all as specified and directed.

S&F in repair for Chromium plated brackets and knobs for curtain rods complete all as specified and directed.

S&F 15mm bore GI tubing medium grade with all fitting fixed to wall and ceiling or laid in floor complete all as specified and directed.

Re-fixing 15mm bore old steel tubing and connection in view old position (wall, ceiling, floor etc) complete all as specified and directed.

S&F 20 mm bore GI tubing medium grade with all fitting fixed to wall and ceiling or laid in floor complete all as specified and directed.

Re-fixing 20 mm bore old steel tubing and connection in view old position (wall, ceiling, floor etc) complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair for Vitreous china wash hand basin (550X400mm) white, flat back excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repair for 32mm bore waste fittings brass chromium plated for glazed ware sinks basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair for 15mm bore dia fancy type pillar taps cast copper alloy with capston head chromium plated screwed down high pressure with or with out lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repair for 10 ltrs capacity PVC valve less symphonic action type flushing cistern low level white inlet ball valve, float , flush pipe and handle including brackets and fixed complete all as specified and directed.

S&F in repair for PVC connection 15mm dia and 600mm long complete all as specified and directed.

S&F in repair for PVC waste pipe 32mm dia complete all as specified and directed.

S&F in repair for sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and waste incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mmx460mmbowl size 410mmx330mmx160mm complete all as per specified and directed.

S&F in repair vitreous china squatting pan 'Orissa' pattern size 580x440mm with white integral footrest (excluding flushing cistern and flush pipe including making good )complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolt, flushing cistern and flush pipe) including making good complete all as specified and directed.

S&F in repair plastic water closet seat, black and white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair for 15mm bore brass chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed to wall complete all as specified and directed.

S&F in repair for15mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to wall complete all as specified and directed.

S&F in repair for 15 mm bib tap CP fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrules and complete all as specified and directed.

S&F in repair for 15mm bore chromium plated brass, fancy type angle cock screwed for iron pipe or union and fixed complete all as specified and directed.

S&F in repair for 15mm dia stop valves, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed with both ends for iron pipe or for union complete all as specified and directed.

S&F in repair for 15mm dia Bib taps standard of PTMT any colour high pressure screwed for iron pipe fixed in repair (minimum weight 90 gms) complete all as specified and directed.

S&F in repair for 15mm dia stop cock standard of PTMT any colour high pressure screwed for iron pipe fixed in repair (minimum weight 90 gms) complete all as specified and directed.

S&F in repair for CP towel rail of 20mm dia with hook 600mm long complete all as specified and directed.

S&F in repair for Vitreous china bowl urinal flat back size of 465X355X265 mm white (minimum) with grating and union for discharge pipe including flush pipe and waste pipe (excluding flushing cistern) complete all as specified and directed .

M&L for preparation old decorated surfaces of walls and applying one coat of white wash complete all as specified and directed.

M&L for preparation old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation old decorated surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation old decorated surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces and applying two coats of distemper oil emulsion on walls complete all as specified.

M&L for preparation of newly plastered surface of wall and applying two coats of distemper oil emulsion complete all as specified and directed.

M&L for preparation of surfaces of any description and applying one coat of exterior weather proof emulsion complete all as specified and directed.(Apex of Asian or equivalent)

M&L for preparation of old decorated wooden surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

M&L for preparation of old wooden surfaces and applying two coats of synthetic enamel paint complete all as specified and directed..

M&L for preparation of old steel surfaces and applying a coat of synthetic enamel paint complete all as specified and directed..

M&L for Writing letter or figures (block, Roman, Italic or Indian) upto 150 mm height complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n exc 15 cm thickness ( below or above ground level) etc complete all as specified and directed.

Demolition of Concrete unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed

Demolition for reinforced Concrete of any description and in any position not otherwise specifically provided for cement concrete complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, including ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Taking down cement plaster of any description on stone walls incl raking joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed..

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Dismantling of 150 mm dia CI pipes pipe jointed in cement mortar and taking out of trenches if required complete all as specified and directed.

Dismantling of 100 mm dia CI pipes pipe jointed in cement mortar and taking out of trenches if required complete all as specified and directed.

Excavation in trenches n exc 1.5m wide and n.exc 1.5m depth for man holes and sewage lines etc n exc 10 sqm on plan and nexc 1.5m in depth and getting out for hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm in hard / dense soil complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point hard/dense soil complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 (40mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping including form work complete all as specified and directed.

M&L for Providing precast cement concrete type 1:2:4 type B-1, (20 mm graded aggregate) as in landing, cover slab (for manholes etc) chullah woods, chajjas, water trough mangers, shelves, and similar articles with plain faces complete all as specified and directed.

M&L for Prepolished Chequered cement concrete tiles 25cm x 25cm/ 30cmx30 cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 20 mm thick screed bed or bedding of CM 1:6 complete all as specified and directed

M&L PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in surface channel and drain complete all as specified and directed.

Extra for forming fair finished drain and channel 30 cm inner girth in cement concrete using extra cement in forms mould mitred/stopped ends complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30 cm complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in concrete bed to 150 mm dia pipes including packing under and haunching against the side of pipes after they are laid and tested complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in concrete bed to 100 mm dia pipes including packing under and haunching against the side of pipes after they are laid and tested complete all as specified and directed.

M&L for pre cast cement concrete 1:3:6 type C1(using 20mm graded stone aggregate) solid block masonary exceeding 10cm thick and set in cement mortar 1:6 complete all as specified and directed..

All as per Srl item No. 107 here in before but except PCC blocks

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.

All as per Srl item No. 109 here in before but except stones

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface n exc 20 mm complete all as specified and directed.

M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses with CM 1:4 complete all as specified and directed.

M&L for hand packing (any thickness) at back of walls etc with broken stone or boulder and raising (or lowering) to the required level complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly plastered wall surfaces and applying three coats of white wash complete all as specified and directed..

M&L for 150 mm dia CI pipe (sand cast) soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors complete all as specified.

All as per item No. 116 above but except pipe complete all as specified.

M&L for 100 mm dia CI pipe (sand cast) soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

All as per item No 118 above but except pipe complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipe single socketed any length with rubber ring joints laid in trenches or in floor including taking down complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) pipe single socketed any length with rubber ring joints laid in trenches or in floor including taking down complete all as specified and directed.

S&F for PVC (SWR) bends any radius 110mm bore pipe including taking down complete all as specified and directed.

S&F in repair for 75mm PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for deformed/twisted MS bars 6 to 8mm dia, cut to length, bent to shape required including crancking bending spirally for hoping for col hooking ends and binding with and including mile steel wire non less than 0.9 mm dia securing with clips in quality complete all as specified and directed.

Taking out of water from septic tank by pumping/manually in foul position as specified and removing to out side MD land complete all as specified and directed.

Removing of sludge mixed with water n exc 150 m and depositing where directed at a level n exc 1.5 m above the starting point and burried in ground by digging, including returning filling in working in foul position complete all as specified and directed.

Cleaning of existing sewage lines of any size by roding with split bamboo or any other means as approved and removal of blockage including taking out existing RCC cover slabs of manholes of any size without damaging the slab covers to facilitate cleaning and replacing back in original position & cleaning debris/sludge in pipe line of any type complete all as directed by the Engineer-in-charge

Cleaning of manhole of any size of removing of sludge mixed with water n exc 50 M away from the point complete all as specified and directed.

Material and labour for cleaning of blockage manually by roding, pumping, etc and removing the deposited sludge/solid/liquid material, outside MD land, complete all as directed for Water Closet (Indian or European) , trap & CI pipe line upto first manhole complete all as specified and directed.

Ditto as per item No 129 here-in-before but for Gully trap upto first manhole.

S&F for mild steel work as in post and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire, etc. flat iron fillets ( for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wire, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire. Complete all as specified and directed.

S&F in repair for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolt including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed.

Mild steel screw bolts (machine made) 5mm to 10mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 5cm long each bolt complete.

Mild steel round bars cut to length required incl bending hooks / ends as directed by Engineer in charge or welding for overlaps as in ties for fencing etc., conforming to Grade-I IS-432 (Part-1) or Fe-410-W (Grade E-250) Quality 'A' or Fe-290 (Grede-E-165) complete all as specified and as directed

Preparing ends of steel posts as in fencing and treated with coal tar or coal tar black paint area tarred exc 0.10 Sqm but not exc 0.50 Sqm each M&L complete.

M/S Swarn Constructions

ms triveni nirman